[Link].

com

Technical Specifications for XJ750 Workover Rig

1. Technical standard and reference

 API Spec 4F (2nd edition) Mast base specification for Drilling and Workover rig
 API Spec Q1 (7th edition) Quality outline
 API Spec 8C (4th edition) Drilling and Production Hoisting Equipment
 API Spec 7K (3rd edition) Drilling Equipment specification
 API Spec 7-2001 (40 edition) Rotary Drill Stem Elements specification
th

 API Spec 9A (25th edition) Wireline specification

 SY/T5202-2004 Specification for Drilling Equipmwnt
 ISO 9001-2000 Quality Systems
 HSE Health, safety, environment control system

2. Main specifications
 Service depth 8500m (φ21/2” tubing)
 Workover depth 7000m (φ27/8” DP)
 Rated hook load: 1176kN
 Max. static load: 1470kN
 Rated Horsepower, engine C11 385HP (2100r/min) 2
 Clear height, mast 34m
 Height, monkey board (to substructure) 55ft
 Traveling system 4×5
 Height, substructure 4.5m
 Drive type, carrier 12×8
 Dia., wireline φ29mm
 Traveling dimensions 19.8m×3.1m×4.47m
 Max. speed 72km/h
 Min. turning radius 18m
 Traveling weight 56000kg

3. Configuration
1 Power system 2 Carrier

XJ750-1/8
[Link]
 [Link]

C11 (385hp) Engine Chassis, axles, tires (including spare tire),

HD4700 Transmission suspension, steering, braking, cab,
Guard cover of engine removable walkway and handrail, ladder
Inline type dual diesel tanks from ground to rig, tool box/tool cabinet etc.
3 Drive system 4 Drawworks
Right angle gear box Main drum & brake system (circulating water
Drive shaft and guard shield cooling)
Transfer case Sand drum & brake system (splash water
Input and output chain and guard cooling)
shield WCB224 Air controlled water-cooling disc
brake
Cooling system of brakes
5 Mast and traveling system 6 Rotary system
34m mast assy. (including crown 3t & 5t hydraulic winch, main oil pump,
block and monkey board), 3”single hydraulic oil tank, steering oil pump and
standpipe, 4 pcs wind guylines, 2 pcs hydraulic assist steering system, telescoping
internal load guyline, 2 pcs cross cylinder, raising cylinder, leveling cylinder, air
guylines of monkey board, 2 pcs compressor, air reservoir, console box,
reinforced guyline, deadline anchor, battery and valves.
weight indicator SL160 swivel (w/o spinner)
7 Accessories
Preheater
Mast inclinometer
Overwinding crown saver
4.5m telescoping substructure
Sucker rod hanger
Driller’s console

4. Specifications of main parts

4.1 Diesel engine
C-11 diesel engine, c/w auto shutdown for oil over pressure, water over temperature, speed
governor. Meet the Euro-3 Emission Standard; 12V DC is supplied by engine.
 Model C11

XJ750-2/8
[Link]
 [Link]

 Rated horsepower 385BHP / (2100rpm)

 Diameter, cylinder 145mm
 Stroke 183mm
 Cylinder no. and arrangement 6 linear arrangement
 Displacement 18.1 L
 Qty. 2

4.2 Hydraulic transmission

HD4700 transmission, c/w PTO for main oil pump. Valve for engaging and gear shifting of
hydraulic clutch uses air over hydraulic shifter. The transmission oil is cooled by radiator of
diesel engine through heat exchanger.
 Model: ALLISON HD4700
 Gear ratio:
1 2 3 4 5 Reverse
4:1 2.684:1 2.013:1 1.351:1 1:1 5.12:1
 Gear ratio of transfer case: 1:1

4.3 Carrier
Fabricated from reinforced frame welding with H type material. Heavy-duty, wide wheelbase,
carrier with 12×4 drive. The first, second and third axles: 10t load, steering slave axle. The
fourth and fifth axles: 13t load, driving axle. The sixth axle: 12t load, slave axle. The front
three tires are MICHELIN (or other similar imported tire) tubeless tire (type: 445/65R
22.5XZY3), and the rear three tires are MICHELIN (or other similar imported tire) dual
application (type: 315/80R 22.5XZY2). The front three axles are of steel plate spring
suspension, the fourth and fifth axles are of rigid walking beam suspension, the sixth axle is
of air suspension. Hydraulic assist steering. Cab is COE type with single seat. Interlock for
wheels and axles between fourth and fifth axles. All controls of carrier are centralized in cab.

 Axle base 1300+1300+4805+1370+1370 mm

 Wheel base 2180 mm
 Drive type 12×4
 Approach angle 27°
 Departure angle 17.3°

XJ750-3/8
[Link]
 [Link]

 Min. turning radius 18m

 Min. sweeping radius, mast: 22.5m
 Max. climb gradient 32%
 Min. ground clearance 0.34m
 Max. speed: 72km/h
 Tire, front 3 axles single tire
 Tire, rear 3 axles double tires

4.4 Right angle gear box

The right angle gear box mainly consists of input shaft, output shaft, big and small spiral
cone gear, output bearing seat, cast steel housing, support, flange, sprocket and various
kinds of bearings. The box body is made of integral casting steel and is compact in
structure. Helical bevel gear can drive stably with large power. The input and output shafts
are made of premium alloy steel. Bearings have two types: dual line tapered bearing and
single line centripetal short column roller bearing. Compound sealing, reliable oil bath
spraying lubrication.
 Gear ratio: 1:1.57

4.5 Drive system

The engine power is divided into 4 ways after reaching the transfer case via transmission
box. Power of the upper transfer case is transferred to main drum through right angle gear
box and sand drum. Power of the middle transfer case is transferred to rotary table through
the rotary drive. The last way is to rear axle. The specifications of drive chain on the deck
are as following:

Right angle gear box→sandline drum 13/4”Double chain

Sandline drum→main drum 13/4”Double chain
Rotary drives→rotary table 13/4”Double chain

4.6 Drawworks
JC650 double drum drawworks. With 29mm LEBUS groove, c/w over-winding crown saver.
Drum shaft is fabricated of premium alloy steel; ATD-324H air thrust disk clutch for main
drum, inner circulating water cooling system for brakes of main drum, ATD-124H air thrust

XJ750-4/8
[Link]
 [Link]

disk clutch for sand drum, splash water cooling system for brakes of sand drum. Brake rims
are all mono block alloy steel. WCB224 air controlled water-cooling disc brake as auxiliary
brake.
—— Main drum:
 Groove diameter × length: φ480mm×914.5mm
 Groove structure: φ29 LEBUS groove
 Cooling type of brake rims: inner chamber water circulating type
 Model, clutch: ATD-324H forced thrust disk clutch
 Max. fastline pull: 210KN
—— Sandline drum:
 Groove diameter × length: φ324mm×1016mm
 Cooling type of brake rims: air pressure water spraying type
 Model, clutch: ATD-124H forced thrust disk clutch
 Max. fastline pull: 115KN
—— Auxiliary brake
 Model: WCB 224 air-controlled water-cooling disc brake
 Max. brake torque: 42000N·m
 Max. air inlet pressure: 1.03MPa
 Max. water temperature: 82
—— Cooling system for brakes:
 Capacity, water tank: 4m3
 External power, in-line pump motor: 460V AC 60Hz

4.7 Mast
Derrick, double-section angle steel mast, hydraulic raising cylinder and telescoping cylinder;
slant angle can be adjusted by adjustable screw bar. Integral box type crown block, forged
steel sheaves passed dynamic balance test; the profile of groove is designed and made as
per API 8C and wireline of rig; line kicker is also equipped on sheaves seat to prevent
wireline from jumping over; crown shafts have been heat treated and NDT before installed
on rig. Handrail is provided for crown block. Delay type monkey board can be foldable along
with mast telescoping, with adjustable finger to fit for different size pipe string.
—— Mast:
 Model: JJ155/34 W

XJ750-5/8
[Link]
 [Link]

 Clear height: 34m

 Max. static load: 1548kN (8 wirelines)
 Slant angle: 3°, c/w clinometer
 Crown sheaves: Bottom dia. φ655 (for φ29mm wirelines)
 Fastline sheaves: Bottom dia.φ795 (for φ29mm wirelines)
 Traveling system: 4×5
 Capacity, monkey board: 2000m (φ5” DP)
 Max. wind rate: 110km/h (about grade 10)
 Finger beam arrangement, monkey board: horizontal

4.8 4.5m Substructure

The substructure is of telescoping type, and level to the plane of rotary table. Complete with
two sets of ladders (one set to the ground and the other to the carrier), one set of V-door,
walkway, handrails, stairs, escaping chute, mouse hole and rat hole and two backup tong
posts.
 Type: DZ147/4.5-S
 Floor height: 4.5m
 Clear height: 3.5m
 Transportation height: 2.9m
 Max. load, rotary table: 1470KN
 Setback capacity: 6200m (27/8” EUE tubing)
5200m (27/8″ DP)
3800m (31/2” DP)
2600m (41/2” DP)
 Combined load: 1925 KN
 Floor area: 5.2×8m

4.9 ZP205 rotary table

 Type: ZP205
 Max. static load: 3000kN
 Opening diameter: φ520.7mm (20.5″)
 Max. RPM: 300rpm

XJ750-6/8
[Link]
 [Link]

4.10 Mud boat

4.11 Hydraulic system

It is mainly used for assist steering during rig moving, or for leveling of chassis and mast
rising in rig up, and hydraulic application of wellhead tools. The controls of the system are
centralized in driller’s console. Important manipulating parts are multiple protected. Key
parts of system are all imported from USA with reliable and stable performance.
——Max. displacement of oil pump: 165L/min
——Max. pressure, hydraulic system: 14MPa
——Hydraulic oil: 46# wear-resistant oil
——Capacity, oil reservoir: 833L
——3t hydraulic winch:
Model: YJ-3
Rated capacity: 30kN
Quantity: 1
——5t hydraulic winch:
Model: YJ-5
Rated capacity: 50kN
Quantity: 1

4.12 Air system

The air system is mainly used for controls of rig moving or servicing. Equipped with multiple
drying, purifying, antifreezing unit for compressed air. The source of air system is air
compressor that is belt driven by engine. Driller’s console controls drawworks drum, engine
throttle, shutdown, drawworks gearshift, emergency brakes of drum, air spider, air release
valve of crown, relief of hydraulic pump etc. Key parts of the system are imported from USA
with reliable and stable performance.
 Max. displacement, air compressor 0.67m3/1250r/min
 Working pressure, system 0.833 - 0.93MPa
 Capacity, air reservoir 0.155m3

4.13 Electric system

Traveling lighting system included. 12V DC for traveling is supplied from battery and SCR

XJ750-7/8
[Link]
 [Link]

generator driven by engine. Startup of engine, lighting for monitoring gauges, sound and
lighting in transportation are provided. Red alarm lamp of mast, conduit for electric cables of
mast should be provided.
 Power for carrier 12V DC
 External Power 460V AC 60Hz
 Rig lighting 110V AC 60Hz

4.14 Consumable parts come-along with the rig 1 set

4.15 Tools come-along with the rig 1 set

4.16 Documents come-along with the rig 1 set

XJ750-8/8
[Link]