UNIT-2

Codes and Standards

Syllabus
ASME Boiler and Pressure Vessels codes, ASME pressure piping Design Codes, ISO Codes, &
standards, Other Codes and standards.

Piping Standards

Piping standards define application design and construction rules and requirements for piping
components as flanges, elbows, tees, valves etc.
A standard has a limited scope defined by the standard.

For mandatory of engineering practices and requirements.

• A set of technical definitions, specifications, guidelines.

• It clarifies How something should be done.

• ASTM standards, ISO standards, etc.

Piping Codes

Piping codes define the requirements of engineering, design, fabrication, use of materials, tests
and inspection of pipes and piping systems.
Each code has a limited jurisdiction defined by the scope of the code.

It has limited jurisdiction by the code/ a group of general rules/ systematic procedures for design,
fabrication, installation and inspection.

• A code is standard that has been adopted by one or more governmental bodies.

• It can be adopted into law.

• It clarifies what needs to be done.

• Building code, ASME boiler and vessel codes, etc.

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 Dimensional Standards:

They Provide configuration Control information for components.

Main Purpose of Dimensional STD is to assure similar components manufactures by

different supplier will be physically interchangeable.

Mainly this document gives dimensions of various parts.

Mostly Used/ Recommended:

Recommended practices prepared by professional group/ committee for good

engineering practices. Individual company also can develop their personal practice guide to
follow.

Each country has its own codes and standards. But normally American National
standards are most widely used all over the world.

In India, other than American standards, British Standards and Indian Standards are
also used for the design and selection if equipment and piping system.

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 Major Organization for Standards:

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 AMERICAN STANDARDS:

Standards will be made by TWO major institute.

Material Standards by ASTM & Dimensional Standards by ANSI.

Mixed of both are generalized standards and made by ASME.

For piping Design (Commonly used American Standards are):

1. The American Petroleum Institute (API)

2. The American iron and steel institute (AISI)
3. The American National Standards Institute (ANSI)
4. The American Society for Testing and Materials (ASTM)
5. The American welding Society (AWS)
6. The American Water Work Association (AWWA)
7. The Manufacturers Standardization society (MSS) for Valves and Fitting industry
standards (MSS-SP)
8. The American Society of Mechanical Engineers (ASME)

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 TOPIC 1- ASME Boiler & Pressure Vessels Codes:

 This code is made and adopted by ASME for Boiler and Pressure vessels.
 ASME also responsible for design, construction of Boilers & pressure vessels (BPV).
 ASME choose volunteers as technical experts which are responsible for written and
maintenance of documents related with BPVC.
 Accreditation body of ASME gives contract to 3 rd parties for verification, testing and
certification.
 It consist of 12 Sections and a code cases.

ASME BPVC Section-I

Rules for Construction of POWER boilers.
ASME BPVC Section-II
It consists of 5 Parts
Part A= Ferrous Specifications
Part B= Non Ferrous Specifications
Part C= Specifications for welding rods, electrodes, filler materials, etc.
Part D= Properties (Customary)
Part D= Properties (Metric)

ASME BPVC Section-III

Rules for Construction of Nuclear Facility. It has divisions and sub sections.
Division 1- General Requirements
Subsection NB – Class 1 Components
Subsection NC – Class 2 Components
Subsection ND – Class 3 Components
Subsection NE – Class MC (Metallic Components)
Subsection NF – Supports
Subsection NG – Core support Structures

Division 2- Code for concrete containments

Division 3- Containments systems for transportation and storage of spent nuclear
Fuel and high level radioactive material.
Division 5- High Temperature Reactors
*Division 4- Removed

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 ASME BPVC Section-IV
Rules for Construction of Heating boilers
ASME BPVC Section-V
Non Destructive Examination
ASME BPVC Section-VI
Recommended rules for the care and operation of heating and boilers.
ASME BPVC Section-VII
Recommended guidelines for the care Power boilers.
ASME BPVC Section-VIII
Rules for the construction of pressure vessels.
Division 1- Rules of pressure vessels
Division 2- Alternative rules of pressure vessels (Low)
Division 3- Alternative rules of pressure vessels (High)
ASME BPVC Section-IX
Welding, Brazing, Fusing specifications
ASME BPVC Section-X
Fiber Reinforced plastic pressure vessels
ASME BPVC Section-XI
Division 1- Rules for inspection & testing of components of light water cooled plants.
Division 2- Requirements for reliability and integrity management programs for nuclear
Power plants.

ASME BPVC Section-XII

Rules for Construction & Continued services of transport tanks.

ASME BPVC Code Cases

Code Cases-
Provides rules that permits the use of materials and alternative methods of
construction which are not covered in existing all 12 sections of BPVC rules. For such situation
code cases have been developed and adopted according to application.

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 TOPIC 2- ASME Pressure Piping Design Codes:

This codes were developed by ANSI (American National Standards Institute) and adopted
by ASME (American Society for Mechanical Engineers).

ASME B31 Code used for pressure piping.

ASME B31 Piping Codes

Piping codes developed by the American Society of Mechanical Engineers (ASME):

B31.1 Power Piping

Piping typically found in electric power generating stations, in industrial and institutional
plants, geothermal heating systems and central and district heating and cooling plants.

B31.2 Fuel gas Piping

It is used for gas piping designing system. Now it is used separately as NFPA CODE

NFPA-National Fuel Protection Association = NFPA Z223.1 or NFPA -54

B31.3 Process Piping

Piping typically found in petroleum refineries, chemical, pharmaceutical, textile, per,

semiconductor and cryogenic plants and related processing plants and terminals.

B31.4 Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids

Piping transporting products which are predominately quid between plants and terminals
and within terminals, pumping, regulating, and metering stations.

B31.5 Refrigeration Piping

Piping for refrigerants and secondary coolants.

B31.8 Gas Transportation and Distribution Piping Systems

Piping transporting products which are predominately gas between sources and terminals
including compressor, regulating and metering stations, gas gathering pipelines.
BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane
 B31.9 Building Services Piping

Piping typically found in industrial, institutional, commercial and public buildings and in
multi-unit residences which does not require the range of sizes, pressures and
temperatures covered in B311.1

B31.11 Slurry Transportation Piping Systems

Piping transporting aqueous slurries between plants and terminals within terminals,
pumping and regulating stations.

B31.12 Hydrogen Piping Systems

This code is applicable to piping in gaseous and liquid hydrogen service and to pipelines in
gaseous hydrogen service.

This code is applicable up to and including the joint connecting the piping to associated
pressure vessels and equipment but not to the vessels and equipment themselves.

REMOVED/ AMMENDMEND within Codes:

B31.6 Removed from main codes and inserted it in B31.3. (Chemical Plant piping).

B31.7 Removed from main codes and inserted it in ASME BPVC Section III Subsection NA,
NB, NC & ND. (Nuclear piping).

B31.10 Removed from main codes and inserted it in B31.3. (Cryogenic Piping system).

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 You have to write and explain detailed in the university examination.

For example. If they ask for B 31.3

Question like: what is the Scope of ASME B31.3 code of PPDC(Pressure Piping Design
Codes) ? (For 4-6marks)

Ans/Solution will be like this:

B 31.3 Process Piping

Last amendment/ Modification :( 2012)

 Design of chemical and petroleum plants & Refineries processing chemicals,

Hydrocarbons, water, steam, etc.
 This codes contains rules for piping typically found in petroleum refineries, chemical,
pharmaceutical, textile, Paper, Semiconductor and cryogenic plants & related processing
plants.
 This codes prescribes requirements for material and components, design, fabrication,
assembly, erection, examination, inspection and testing of piping.
 This code applied to piping for all fluids including
1. Raw, intermediate and finished chemicals
2. Petroleum products
3. Gas, Steam, Air & water
4. Fluidized Solids
5. Refrigerants
6. Cryogenic fluids

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 TOPIC 3- API Codes & Standards:

 The American Petroleum Institute –Founded in 20th March 1919

 Largest U.S Trade association for the oil & Natural Gas industry.
 It dealt with production, refinement, distribution and many aspects related to
petroleum industry.
 Equipment specified to these standards is typically more robust than general
industrial applications.
 Use of API standards by piping engineers are greatly appreciated.

 API 5L – Specification for Line Pipe

 API 6D – Pipe Line Valves, End Closures, Connectors and Swivels
 API 6F – Recommended Practice for Fire Test for valves
 API 593 – Ductile Iron Plug Valves – Flanged Ends
 API 598 – Valve Inspection and Test
 API 600 – Steel Gate Valves
 API 601 – Metallic Gaskets for Refinery Piping
 API 602 – Compact Design Carbon Steel Gate Valves
 API 604 – Ductile Iron Gate Valves – Flanged Ends
 API 605 – Large Diameter Carbon Steel Flanges
 API 607 – Fire Test for Soft Seated Ball Valves
 API 609 – Butterfly Valves
 API 1104 – Standard for Welding Pipeline and Facilities

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 ASME B16 Dimensional Codes
The ASME B16 Piping Component Standards

Piping component standard developed by the American Society of Mechanical

Engineers (ASME) & the American National Standards Institute (ANSI)

B16.1 Cast Iron Pipe Flanges and Flanged Fittings

B16.3 Malleable Iron Threaded Fittings, Class 150 and 300

B16.4 Cast Iron Threaded Fittings, Classes 125 and 250

B16.5 Pipe Flanges and Flanged Fittings

B16.9 Factory Made Wrought Steel Butt welding Fittings

B16.10 Face to Face and End to End Dimensions of Valves

B16.11 Forged Fittings, Socket Welding and Threaded

B16.12 Cast Iron Threaded Drainage Fittings

B16.14 Ferrous Pipe Plugs, Bushings and Locknuts with Pipe Threads

B16.15 Cast Bronze Threaded Fittings Class 125 and 250

B16.18 Cast Copper Alloy Solder Joint Pressure Fittings

B16.20 Ring Joint Gaskets and Grooves for Steel Pipe Flanges

B16.21 Nonmetallic Flat Gaskets for Pipe Flanges

B16.22 Wrought Copper and Copper Alloy Solder Joint Pressure Fittings

B16.23 Cast Copper Alloy Solder Joint Drainage Fittings – DWV

B16.24 Cast Copper Alloy Pipe Flanges and Flanged Fittings Class 150, 300, 400,600, 900,
1500 and 2500

B16.25 Butt welding Ends

B16.26 Cast Copper Alloy Fittings for Flared Copper Tubes

B16.28 Wrought Steel Butt welding Short Radius Elbows and Returns

B16.29 Wrought Copper and Wrought Copper Alloy Solder Joint Drainage Fittings – DWV

B16.32 Cast Copper Alloy Solder Joint Fittings for Sovent Drainage Systems

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 B16.33 Manually Operated Metallic Gas Valves for Use in Gas Piping systems Up to 125
psig (sizes ½ through 2)

B16.34 Valves – Flanged, Threaded and Welding End

B16.36 Orifice Flanges

B16.37 Hydrostatic Testing of Control Valves

B16.38 Large Metallic Valves for Gas Distribution (Manually Operated, NPS 2 ½ to 12, 125
psig maximum)

B16.39 Malleable Iron Threaded Pipe Unions, Classes 1150, 250 and 300

B16.40 Manually Operated Thermoplastic Gs Shutoffs and Valves in Gas Distribution

Systems

B16.42 Ductile Iron Pipe Flanges and Flanged Fittings, Class 150 and 300

B16.47 Large Diameter Steel Flanges (NPS 26 through NPS 60)

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

BRITISH STANDARDS:

In many instances, it is possible to find a British Standard which may be substitutes for
American Standards. For example, BS 2080 (British Standard for Face to Face or End
to End dimensions of valves) is identical to ANSI/ASME B16.10. Similarly BS 3799 and
ANSI/ASME B 16.11 also compare.
There are certain British Standards referred by Indian Manufacturers for Piping and Valves.
The most commonly referred British Standards in the Piping Industry are:

o BS 10 : Flanges
o BS 806 : Pipes and Fittings for Boilers
o BS 916 : Black Bolts, Nuts and Screws
o BS 970: Steel for Forging, Bars, Rods, valve steel, etc.
o BS 1212 : Specification for Float Operated Valves
o BS 1306 : Copper and Copper alloy pressure piping system
o BS 1414 : Gate Valves for Petroleum Industry
o BS 1560 : Steel Pipe Flanges
o BS 1600 : Dimensions of Steel Pipes
o BS 1640 : Butt Welding Fittings
o BS 1740 : Wrought Steel screwed pipe fittings
o BS 1868 : Steel Check Valves for Petroleum Industry
o BS 1873 : Steel Globe and Check Valves for Petroleum Industry
o BS 1965 : Butt welding pipe fittings
o BS 2080 : Face to Face / End to End dimensions of Valves
o BS 2598 : Glass Pipelines and Fittings
o BS 3059 : Boiler and Super-heater Tubes
o BS 3063 : Dimensions of Gaskets for Pipe Flanges
o BS 3381 : Metallic Spiral Wound Gaskets
o BS 3600 : Dimensions of Welded and Seamless Pipes and Tubes
o BS 3601 : C.S. Pipes and Tubes for pressure purposes at room temperature
o BS 3602 : C.S. Pipes and Tubes for pressure purposes at high temperature
o BS 3603 : C.S. and Alloy Steel Pipes and Tubes for pressure purposes at low
temperature
o BS 3604 : Alloy Steel Pipes and Tubes for high temperature
o BS 3605 : SS Pipes and Tubes for pressure purposes
o BS 3799 : Socket Weld / Screwed Fittings
o BS 3974 : Pipe hangers, Slides and Roller type supports
BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane
 o BS 4346 : PVC pressure pipe - joints and fittings
o BS 4504 : Steel, Cast Iron and Copper alloy fittings
o BS 5150 : Cast Iron Wedge and Double Disc Gate Valves for general purposes
o BS 5151 : Cast Iron Gate (parallel slide) Valves for general purposes
o BS 5152 : Cast Iron Globe and Check Valves for general purposes
o BS 5153 : Cast Iron Check Valves for general purposes
o BS 5154 : Copper alloy Globe, Gate and Check Valves
o BS 5155 : Cast Iron and Cast Steel Butterfly Valves for general purposes
o BS 5156 : Diaphragm Valves for general purposes
o BS 5157 : Steel Gate (parallel slide) Valves for general purposes
o BS 5158 : Cast Iron and Cast Steel Plug Valves for general purposes
o BS 5159 : Cast Iron and Cast Steel Ball Valves for general purposes
o BS 5160 : Flanged Steel Globe and Check Valves for general purposes
o BS 5163 : Flanged Cast Iron Wedge Gate Valves for general purposes
o BS 5351 : Steel Ball Valves for Petroleum Industry
o BS 5352 : Steel Gate, Globe and Check Valves, smaller than 2" NB
o BS 5353 : Specifications for Plug Valves
o BS 5391 : Specifications for ABS pressure pipes
o BS 5392 : Specifications for ABS fittings
o BS 5433 : Specifications for underground stop valves for water services
o BS 5480 : Specifications for GRP pipes and fittings
o BS 6364 : Specifications for Valves for Cryogenic services
o BS 6755 : Testing of Valves
o BS 6759 : Safety Valves

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

INDIAN STANDARDS:

Bureau of Indian Standards (BIS) have so far not developed an Indian Standard for the
design of Piping Systems. Hence, ANSI Standards ASME 31.1 and 31.3 are widely used
for the design. These standards also accept materials covered in other standards. Unlike
American Standards, Indian Standards cover dimensions and material specifications
under the same standard number. There are no groupings based on branch of
engineering. Some of the most commonly referred Indian Standards by Piping Engineers
are:

o IS 210 : Grey Iron Castings

o IS 226 : Structural Steel (superseded by IS 2062)
o IS 554 : Dimensions of Pipe Threads
o IS 778 : Specification for Copper Alloy Gate, Globe and Check Valves
o IS 780 : Specification for Sluice Valves - 50 NB to 300 NB
o IS 1239 (Part I and II) : Specification for Mild Steel tubes and fittings
o IS 1363 : Hexagonal Bolts, Screws and nuts - Grade C
o IS 1364 : Hexagonal Bolts, Screws and nuts - Grade A and B
o IS 1367 : Technical supply conditions for threaded steel fastners
o IS 1536 : Centrifugally Cast Iron Pipes
o IS 1537 : Vertically Cast Iron Pipes
o IS 1538 : Cast Iron Fittings
o IS 1870 : Comparison of Indian and Overseas Standards
o IS 1879 : Malleable Iron Pipe Fittings
o IS 1978 : Lined Pipe
o IS 1979 : High Test Line Pipe
o IS 2002 : Steel Plates
o IS 2016 : Plain Washers
o IS 2041 : Steel Plates for Pressure Vessels used at moderate and low temperature
o IS 2062 : Steel for general structural purposes
o IS 2379 : Color Code for Identification of Pipelines
o IS 2712 : Compressed Asbestos Fiber Jointing
o IS 2825 : Code for Unfired Pressure Vessels
o IS 2906 : Specification for Sluice Valves - 350 NB to 1200 NB
o IS 3076 : Specification for LDPE Pipes
o IS 3114 : Code of Practice for laying pipes
BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane
 o IS 3516 : Cast Iron flanges and flanged fittings for Petroleum Industry
o IS 3589 : Seamless or ERW Pipes (150 NB to 2000 NB)
o IS 4038 : Specifications for Foot Valves
o IS 4179 : Sizes for pressure vessels and leading dimensions
o IS 4853 : Radiographic Examination of Butt Weld Joints in pipes
o IS 4864 to IS 4870 : Shell Flanges for vessels and equipment’s
o IS 4984 : Specification for HDPE Pipes
o IS 4985 : Specification for PVC Pipes
o IS 5312 : Specification for Check Valves
o IS 5572 : Classification of Hazardous area for Electrical Installation
o IS 5822 : Code of practice for laying welded steel pipes
o IS 6157 : Inspection and Testing of Valve
o IS 6286 : Seamless and Welded pipes for Subzero temperatures
o IS 6392 : Steel Pipe Flanges
o IS 6630 : Seamless alloy steel pipes for high temperature service
o IS 6913 : Stainless Steel tubes for food and beverage industry
o IS 7181 : Horizontally cast iron pipes
o IS 7240 : Code of Practice for Cold Insulation
o IS 7413 : Code of Practice for Hot Insulation
o IS 7719 : Metallic spiral wound gaskets
o IS 7806 : Stainless Steel Castings
o IS 7899 : Alloy Steel castings for pressure services
o IS 8008 : Specification for molded HDPE Fittings
o IS 8360 : Specification for fabricated HDPE Fittings
o IS 9890 : Ball Valves for general purposes
o IS 10221 : Code of Practice for coating and wrapping of underground MS pipelines
o IS 10592 : Eye wash and safety showers
o IS 10605 : Steel Globe Valves for Petroleum Industries
o IS 10611 : Steel Gate Valves for Petroleum Industries
o IS 10711 : Size of Drawing Sheets
o IS 10805 : Foot Valves
o IS 10989 : Cast / Forged Steel Check Valves for Petroleum Industry
o IS 10990 : Technical drawings - Simplified representation of pipelines
o IS 11790 : Code of Practice for preparation of Butt welding ends for valves, flanges
and fittings
o IS 11791 : Diaphragm Valves for general purposes

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

 o IS 11792 : Steel Ball Valves for Petroleum Industry
o IS 12709 : Specifications for GRP pipes
o IS 13049 : Specifications for Diaphragm type float operated valves
o IS 13095 : Butterfly Valves
o IS 13257 : Ring type joint gasket and grooves for flanges

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

The Manufacturers Standardization Society of valves and
Fitting Industry-Standard Practices (MSS-SP):

 In addition to the above standards and material codes, there are standard
practices followed by manufacturers.
 These are published as advisory standards and are widely followed. The most
common MSS-SP standards referred for piping are

 MSS-SP-6 : Standard Finishes for contact surface for flanges

 MSS-SP-25 : Standard marking system for valves, fittings, flanges
 MSS-SP-42 : Class 150 corrosion resistant gate, globe and check valves
 MSS-SP-43 : Wrought stainless steel butt weld fittings
 MSS-SP-56 : Pipe hanger supports – Material, design and manufacture
 MSS-SP-61 : Pressure testing of valves
 MSS-SP-67 : Butterfly Valves
 MSS-SP-68 : High Pressure off seat butterfly valves
 MSS-SP-69 : Pipe hanger supports – selection and applications
 MSS-SP-70 : Cast iron gate valves
 MSS-SP-71 : Cast iron check valves
 MSS-SP-72 : Ball Valves
 MSS-SP-78 : Cast iron plug valves
 MSS-SP-80 : Bronze gate, globe and check valves
 MSS-SP-81 : Stainless steel bonnet-less knife gate valves
 MSS-SP-83 : Pipe unions
 MSS-SP-85 : Cast iron globe valves
 MSS-SP-88 : Diaphragm valves
 MSS-SP-89 : Pipe hangers and supports – fabrication and installation practices
 MSS-SP-90 : Pipe hangers and supports – guidelines on terminology
 MSS-SP-92 : MSS valves user guide
 MSS-SP-108 : Resilient seated eccentric CI plug valves

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

ISO Standards –International Organization for
Standardization

ISO standards are numbered with the format:

ISO “nnnnn: yyyy: Title"

Where,

"nnnnn" = standard number

"yyyy" = year published

"Title" = description of the subject

In addition may European and Domestic versions be publishes as:

 EN ISO nnnnn = European version of the International Standard

 BS EN ISO nnnnn = British version of the European version of the International Standard

Example ISO number

ISO IS228-[Link] Pipe threads where pressure-tight joints are not made on the threads -- Part 1:
Dimensions, tolerances and designation

ISO also creates Technical Reports such as references, explanations, etc., where "TR" replace
"IS" in the standard's name.

Industrial pipe, tube and fittings standards and specifications from the ISO - International
Organization for Standardization:

 ISO 7-1:1994-05
Pipe threads where pressure-tight joints are made on the threads - Part 1: Dimensions,
tolerances and designation
 ISO 7-2:2000
Pipe threads where pressure-tight joints are made on the threads - Part 2: Verification by
means of limit gauges
th
BE 7 SEM/NFSC Piping Design Mr. Tushar Gaidhane
  ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1
 ISO 228-1:2000
Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions,
tolerances and designation
 ISO 228-2:1987
Pipe threads where pressure-tight joints are not made on the threads; Part 2 : Verification
by means of limit gauges
 ISO 392:1986 Asbestos-cement pipe fittings for building and sanitary purposes
 ISO 881:1980 Asbestos-cement pipes, joints, fittings/sewage/drain
 ISO 1179:1981
Pipe connections, threaded to ISO 228/1, for plain end steel and other metal tubes i n
industrial applications
 ISO 1635-2:1987 Seamless wrought copper and copper alloy tube
 ISO 1651:1974 Tube drawing mandrels
 ISO 1684:1975 Wire, bar and tube drawing dies; Specifications
 ISO 2507-1:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test
method
 ISO 2507-2:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for
unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes
and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes
 ISO 2507-3:1995
Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for
acrylonitrile/butadiene/styrene (ABS) and acrylonitrile/styrene/acrylic ester (ASA) pipes and
fittings
 ISO 2531:1998
Ductile iron pipes, fittings, accessories and their joints for water or gas applications
 ISO 2804:1996 Wire, bar or tube drawing dies - As-sintered pellets of hardmetal (carbide) -
Dimensions
 ISO 2851:1993 Stainless steel bends and tees for the food industry
 ISO 2852:1993 Stainless steel clamp pipe couplings for the food industry
 ISO 3183-1:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery
conditions - Part 1: Pipes of requirement class A
 ISO 3183-2:1996
Petroleum and natural gas industries - Steel pipe for pipelines - Technical delivery
conditions - Part 2: Pipes of requirements class B
 ISO 3253:1998
Gas welding equipment - Hose connections for equipment for welding, cutting and allied
processes
 ISO/TR 3313:1998
Measurement of fluid flow in closed conduits - Guidelines on the effects of flow pulsations
on flow-measurement instruments

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane

  ISO 3419:1981
Non-alloy and alloy steel butt-welding fittings
 ISO 3458:1976
Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leak
proofness under internal pressure
 ISO 3514:1976
Chlorinated polyvinyl chloride (CPVC) pipes and fittings; Specification and determination of
density
 ISO 3545-1:1989
Steel tubes and fittings; symbols for use in specifications; part 1: tubes and tubular
accessories with circular cross-section
 ISO 3545-2:1989
Steel tubes and fittings; symbols for use in specifications; part 2: square and rectangular
hollow sections
 ISO 3545-3:1989
Steel tubes and fittings; symbols for use in specifications; part 3: tubular fittings with circular
cross-section
 ISO 3586:1976
Glass plant, pipeline and fittings; general rules for testing, handling and use
 ISO 3587:1976
Glass plant, pipeline and fittings; Pipeline and fittings of nominal bore 15 to 150 mm;
Compatibility and interchangeability
 ISO 4056:1978
Polyethylene (PE) pipes and fittings- designation
 ISO 4059:1978
Polyethylene (PE) pipes; Pressure drop in mechanical pipe-jointing systems; Method of test
and requirements
 ISO 4144:2003
Pipework - Stainless steel fittings threaded in accordance with ISO 7-1
 ISO 4397:1993
Fluid power systems and components; connectors and associated components; nominal
outside diameters of tubes and nominal inside diameters of hoses
 ISO 4440-1:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 1: Test
method
 ISO 4440-2:1994
Thermoplastics pipes and fittings - Determination of melt mass-flow rate - Part 2: Test
conditions
 ISO 4451:1980 Polyethylene (PE) pipes and fittings - determinati
 ISO 4483:1979 Asbestos-cement pipelines; Field pressure testing
 ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines; External and internal coating by
bitumen or coal tar derived materials
 ISO 5730:1992 Stationary shell boilers of welded construction (other than water-tube
boilers)
th
BE 7 SEM/NFSC Piping Design Mr. Tushar Gaidhane
  ISO 6207:1992 Seamless nickel and nickel alloy tube
 ISO 6447:1983
Rubber seals; Joint rings used for gas supply pipes and fittings; Specification for material
 ISO 6605:2002
Hydraulic fluid power - Hoses and hose assemblies - Test methods
 ISO 6761:1981
Steel tubes; Preparation of ends of tubes and fittings for welding
 ISO 6964:1986
Polyolefin pipes and fittings; Determination of carbon black content by calcination and
pyrolysis; Test method and basic specification
 ISO 8142:1990
Thermal insulation; bonded preformed man-made mineral fiber pipe sections; specification
 ISO 9095:1990
Steel tubes; continuous character marking and colour coding for material identification
 ISO 9261:2004
Agricultural irrigation equipment - Emitters and emitting pipe - Specification and test
methods
 ISO 9691:1992
Rubber; recommendations for the workmanship of pipe joint rings; description and
classification of imperfections
 ISO 9808:1990
Solar water heaters; elastomeric materials for absorbers, connecting pipes and fittings;
method of assessment
 ISO 10400:1993
Petroleum and natural gas industries; formulae and calculation for casing, tubing, drill pipe
and line pipe properties
 ISO 10806:2003
Pipework - Fittings for corrugated metal hoses
 ISO 11496:1993
Seamless and welded steel tubes for pressure purposes; ultrasonic testing of tube ends for
the detection of laminar imperfections

BE 7th SEM/NFSC Piping Design Mr. Tushar Gaidhane