0% found this document useful (0 votes)

114 views142 pages

Structural Design

Structural design report

Uploaded by

Nick Ustari

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

114 views142 pages

Structural Design

Structural design report

Uploaded by

Nick Ustari

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

[Type the company

name]

etnick studio 2024

STRUCTURAL DESIGN
&ANALYSIS
PROPOSED ONE-STOREYRESIDENCE with
Basement

LOCATION : 17-B Gov’t. Center Subd., Military cut-off,

Baguio City
OWNER : SPS. GEOFFREY C. GERARDO &
CHARON G. GERARDO

JOE JOHANNE C. BUADO

Civil Engineer :

PTR NO._________
PRC NO._________

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : LA TRINIDAD, BENGUET OWNER : LLOYD LUSPIAN
etNick Studio 2024
2024
ANALYSIS INPUT
PART 1

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City

OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO

Job No. Sheet No. Rev

Job03.s.2 1 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Job Information
Engineer Checked Approved

Name: nic jb jb
Date: 07-Feb-24

Comments:
Structure Type: SPACE FRAME

Geometry
Entity Type Count Highest

Nodes 77 85
Analytical Members 137 169

Load Cases
Load Case Type Count

Reference 2
Primary 10
Combination 19

Included in this printout are data for:

All The Whole Structure

Load Case Table

Included in this printout are results for load cases:

L/C Type Name

R1 Reference DL
R2 Reference LL
1 Primary EQ + X + E
2 Primary EQ + X -E
3 Primary EQ - X +E
4 Primary EQ - X -E
5 Primary EQ + Z +E
6 Primary EQ + Z -E
7 Primary EQ - Z +E
8 Primary EQ - Z -E
9 Primary DL
10 Primary LL

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 1 of 36

Job No. Sheet No. Rev

Job03.s.2 2 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

L/C Type Name

101 Combination COMB - 1.2 DEAD + 0.5 LIVE

COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
102 Combination
(1)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
103 Combination
(2)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
104 Combination
(3)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
105 Combination
(4)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
106 Combination
(5)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
107 Combination
(6)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
108 Combination
(7)
COMB - 1.2 DEAD + 0.5 LIVE + 1 SEISMIC-H
109 Combination
(8)
110 Combination COMB - 1.2 DEAD
111 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (1)
112 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (2)
113 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (3)
114 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (4)
115 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (5)
116 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (6)
117 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (7)
118 Combination COMB - 0.9 DEAD + 1 SEISMIC-H (8)
119 Combination COMB - 0.9 DEAD

Nodes
Node X Y Z
(m) (m) (m)

1 0.000 0.000 0.000

2 3.000 0.000 0.000
3 6.000 0.000 0.000
4 0.000 0.000 3.000
5 3.000 0.000 3.000
6 6.000 0.000 3.000
7 0.000 0.000 6.000
8 3.000 0.000 6.000
9 6.000 0.000 6.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 2 of 36

Job No. Sheet No. Rev

Job03.s.2 3 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Node X Y Z
(m) (m) (m)

10 0.000 0.000 8.500

11 3.000 0.000 8.500
12 6.000 0.000 8.500
13 0.000 0.000 12.500
14 3.000 0.000 12.500
16 6.000 0.000 11.500
17 0.000 1.500 0.000
18 3.000 1.500 0.000
19 6.000 1.500 0.000
20 0.000 1.500 3.000
21 3.000 1.500 3.000
22 6.000 1.500 3.000
23 0.000 1.500 6.000
24 3.000 1.500 6.000
25 6.000 1.500 6.000
26 0.000 1.500 8.500
27 3.000 1.500 8.500
28 6.000 1.500 8.500
29 0.000 1.500 12.500
30 3.000 1.500 12.500
31 5.400 1.500 12.500
32 6.000 1.500 11.500
33 0.000 4.500 0.000
34 3.000 4.500 0.000
35 6.000 4.500 0.000
36 0.000 4.500 3.000
37 3.000 4.500 3.000
38 6.000 4.500 3.000
39 0.000 4.500 6.000
40 3.000 4.500 6.000
41 6.000 4.500 6.000
42 0.000 4.500 8.500
43 3.000 4.500 8.500
44 6.000 4.500 8.500

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 3 of 36

Job No. Sheet No. Rev

Job03.s.2 4 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Node X Y Z
(m) (m) (m)

45 0.000 4.500 12.500

46 3.000 4.500 12.500
47 5.400 4.500 12.500
48 6.000 4.500 11.500
49 0.000 7.500 0.000
50 3.000 7.500 0.000
51 6.000 7.500 0.000
52 0.000 7.500 3.000
53 3.000 7.500 3.000
54 6.000 7.500 3.000
55 0.000 7.500 6.000
56 3.000 7.500 6.000
57 6.000 7.500 6.000
58 0.000 7.500 8.500
59 3.000 7.500 8.500
60 6.000 7.500 8.500
62 3.000 9.900 8.500
63 6.000 9.900 8.500
64 0.000 8.700 0.000
65 3.000 8.700 0.000
66 6.000 8.700 0.000
70 0.000 9.100 6.000
71 3.000 9.100 6.000
72 6.000 9.100 6.000
76 0.000 8.900 3.000
77 3.000 8.900 3.000
78 6.000 8.900 3.000
79 3.000 7.500 7.250
80 6.000 7.500 7.250
81 3.000 9.900 7.250
82 6.000 9.900 7.250
83 6.000 7.500 11.500
84 4.500 7.500 8.500
85 4.500 7.500 11.500

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 4 of 36

Job No. Sheet No. Rev

Job03.s.2 5 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beams
Beam Node A Node B Length Property
(m) (rad)

24 1 17 1.500 1 0.000
25 2 18 1.500 1 0.000
26 3 19 1.500 1 0.000
27 4 20 1.500 1 0.000
28 5 21 1.500 1 0.000
29 6 22 1.500 1 0.000
30 7 23 1.500 1 0.000
31 8 24 1.500 1 0.000
32 9 25 1.500 1 0.000
33 10 26 1.500 1 0.000
34 11 27 1.500 1 0.000
35 12 28 1.500 1 0.000
36 13 29 1.500 1 0.000
37 14 30 1.500 1 0.000
39 16 32 1.500 1 0.000
40 17 18 3.000 6 0.000
41 18 19 3.000 6 0.000
42 17 20 3.000 6 0.000
43 18 21 3.000 6 0.000
44 19 22 3.000 6 0.000
45 20 21 3.000 6 0.000
46 21 22 3.000 6 0.000
47 20 23 3.000 6 0.000
48 21 24 3.000 6 0.000
49 22 25 3.000 6 0.000
50 23 24 3.000 6 0.000
51 24 25 3.000 6 0.000
52 23 26 2.500 6 0.000
53 24 27 2.500 6 0.000
54 25 28 2.500 6 0.000
55 26 27 3.000 6 0.000
56 27 28 3.000 6 0.000
57 26 29 4.000 6 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 5 of 36

Job No. Sheet No. Rev

Job03.s.2 6 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

58 27 30 4.000 6 0.000
59 28 32 3.000 6 0.000
60 29 30 3.000 6 0.000
61 30 31 2.400 6 0.000
62 32 31 1.166 6 0.000
63 17 33 3.000 1 0.000
64 18 34 3.000 1 0.000
65 19 35 3.000 1 0.000
66 20 36 3.000 1 0.000
67 21 37 3.000 1 0.000
68 22 38 3.000 1 0.000
69 23 39 3.000 1 0.000
70 24 40 3.000 1 0.000
71 25 41 3.000 1 0.000
72 26 42 3.000 1 0.000
73 27 43 3.000 1 0.000
74 28 44 3.000 1 0.000
75 29 45 3.000 1 0.000
76 30 46 3.000 1 0.000
77 31 47 3.000 1 0.000
78 32 48 3.000 1 0.000
79 33 34 3.000 2 0.000
80 34 35 3.000 2 0.000
81 33 36 3.000 2 0.000
82 34 37 3.000 2 0.000
83 35 38 3.000 2 0.000
84 36 37 3.000 2 0.000
85 37 38 3.000 2 0.000
86 36 39 3.000 2 0.000
87 37 40 3.000 2 0.000
88 38 41 3.000 2 0.000
89 39 40 3.000 2 0.000
90 40 41 3.000 2 0.000
91 39 42 2.500 2 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 6 of 36

Job No. Sheet No. Rev

Job03.s.2 7 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

92 40 43 2.500 2 0.000
93 41 44 2.500 2 0.000
94 42 43 3.000 2 0.000
95 43 44 3.000 2 0.000
96 42 45 4.000 2 0.000
97 43 46 4.000 2 0.000
98 44 48 3.000 2 0.000
99 45 46 3.000 2 0.000
100 46 47 2.400 2 0.000
101 48 47 1.166 2 0.000
102 33 49 3.000 1 0.000
103 34 50 3.000 1 0.000
104 35 51 3.000 1 0.000
105 36 52 3.000 1 0.000
106 37 53 3.000 1 0.000
107 38 54 3.000 1 0.000
108 39 55 3.000 1 0.000
109 40 56 3.000 1 0.000
110 41 57 3.000 1 0.000
111 42 58 3.000 1 0.000
112 43 59 3.000 1 0.000
113 44 60 3.000 1 0.000
118 49 50 3.000 2 0.000
119 50 51 3.000 2 0.000
120 49 52 3.000 2 0.000
121 50 53 3.000 2 0.000
122 51 54 3.000 2 0.000
123 52 53 3.000 2 0.000
124 53 54 3.000 2 0.000
125 52 55 3.000 2 0.000
126 53 56 3.000 2 0.000
127 54 57 3.000 2 0.000
128 55 56 3.000 2 0.000
129 56 57 3.000 2 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 7 of 36

Job No. Sheet No. Rev

Job03.s.2 8 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

130 55 58 2.500 2 0.000

131 56 79 1.250 2 0.000
132 57 80 1.250 2 0.000
133 58 59 3.000 2 0.000
134 59 84 1.500 2 0.000
135 49 64 1.200 5 0.000
136 50 65 1.200 5 0.000
137 51 66 1.200 5 0.000
138 60 63 2.400 5 0.000
139 59 62 2.400 5 0.000
141 64 76 3.007 4 0.000
142 76 52 1.400 5 0.000
143 76 70 3.007 4 0.000
144 70 55 1.600 5 0.000
147 72 57 1.600 5 0.000
148 72 78 3.007 4 0.000
149 78 54 1.400 5 0.000
150 78 66 3.007 4 0.000
151 65 77 3.007 4 0.000
152 77 53 1.400 5 0.000
153 77 71 3.007 4 0.000
154 71 56 1.600 5 0.000
155 79 59 1.250 2 0.000
156 80 60 1.250 2 0.000
157 79 80 3.000 3 0.000
158 81 79 2.400 5 0.000
160 62 63 3.000 5 0.000
161 63 82 1.250 5 0.000
162 82 81 3.000 5 0.000
163 62 81 1.250 5 0.000
164 80 82 2.400 5 0.000
165 60 83 3.000 2 0.000
166 84 60 1.500 2 0.000
167 84 85 3.000 4 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 8 of 36

Job No. Sheet No. Rev

Job03.s.2 9 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

168 85 83 1.500 4 0.000

169 83 48 3.000 1 0.000

Sections
Prop Name Area Iyy Izz J Material Source
(cm2) (cm4) (cm4) (cm4)
67,500.00 67,500.00 113,906.2 CONCRET
1 Rect 0.30x0.30 900.000 Parametric
8 8 66 E
52,083.33 133,333.3 127,345.1 CONCRET
2 Rect 0.40x0.25 1,000.000 Parametric
6 44 64 E
23,333.33 71,458.33 60,031.87 CONCRET
3 Rect 0.35x0.20 700.000 Parametric
4 6 9 E
17,010.00 64,312.49 46,123.55 CONCRET
4 Rect 0.35x0.18 630.000 Parametric
2 6 5 E
45,572.91 89,322.91 102,039.8 CONCRET
5 Rect 0.35x0.25 875.000 Parametric
8 4 59 E
78,750.01 107,187.5 152,551.3 CONCRET
6 Rect 0.35x0.30 1,050.000 Parametric
6 00 28 E

Materials
Mat Name E Density
(kN/mm2) (kg/m3) (/°C)

1 CONCRETE 21.718 0.170 2,402.604 0.000

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)

1 Fixed Fixed Fixed Fixed Fixed Fixed

2 Fixed Fixed Fixed Fixed Fixed Fixed
3 Fixed Fixed Fixed Fixed Fixed Fixed
4 Fixed Fixed Fixed Fixed Fixed Fixed
5 Fixed Fixed Fixed Fixed Fixed Fixed
6 Fixed Fixed Fixed Fixed Fixed Fixed
7 Fixed Fixed Fixed Fixed Fixed Fixed
8 Fixed Fixed Fixed Fixed Fixed Fixed
9 Fixed Fixed Fixed Fixed Fixed Fixed
10 Fixed Fixed Fixed Fixed Fixed Fixed
11 Fixed Fixed Fixed Fixed Fixed Fixed

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 9 of 36

Job No. Sheet No. Rev

Job03.s.2 10 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)

12 Fixed Fixed Fixed Fixed Fixed Fixed

13 Fixed Fixed Fixed Fixed Fixed Fixed
14 Fixed Fixed Fixed Fixed Fixed Fixed
16 Fixed Fixed Fixed Fixed Fixed Fixed

Seismic Load Definitions

UBC Seismic Load Definition
Parameters Values

Year 1997
ZONE 0.400
I 1.000
RWX 8.500
RWZ 8.500
STYP 1.000
NA 1.200
NV 1.400
ACCIDENTAL No

Basic Load Cases

Reference Load Cases
Number Name Type

R1 DL Dead
R2 LL Live

Primary Load Cases

Number Name Type

1 EQ + X + E Seismic-H
2 EQ + X -E Seismic-H
3 EQ - X +E Seismic-H
4 EQ - X -E Seismic-H
5 EQ + Z +E Seismic-H
6 EQ + Z -E Seismic-H
7 EQ - Z +E Seismic-H
8 EQ - Z -E Seismic-H

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 10 of 36

Job No. Sheet No. Rev

Job03.s.2 11 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Number Name Type

9 DL Dead
10 LL Live

Combination Load Cases

Comb. Combination L/C Primar Primary L/C Factor
Name y Name

9 DL 1.200
COMB - 1.2 DEAD +
101
0.5 LIVE
10 LL 0.500

9 DL 1.200

COMB - 1.2 DEAD +

102 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (1)

1 EQ + X + E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

103 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (2)

2 EQ + X -E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

104 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (3)

3 EQ - X +E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

105 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (4)

4 EQ - X -E 1.000

9 DL 1.200
COMB - 1.2 DEAD +
106 0.5 LIVE + 1
SEISMIC-H (5)
10 LL 0.500

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 11 of 36

Job No. Sheet No. Rev

Job03.s.2 12 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Comb. Combination L/C Primar Primary L/C Factor

Name y Name
COMB - 1.2 DEAD +
106 0.5 LIVE + 1 5 EQ + Z +E 1.000
SEISMIC-H (5)

9 DL 1.200

COMB - 1.2 DEAD +

107 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (6)

6 EQ + Z -E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

108 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (7)

7 EQ - Z +E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

109 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (8)

8 EQ - Z -E 1.000

110 COMB - 1.2 DEAD 9 DL 1.200

9 DL 0.900
COMB - 0.9 DEAD +
111
1 SEISMIC-H (1)
1 EQ + X + E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
112
1 SEISMIC-H (2)
2 EQ + X -E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
113
1 SEISMIC-H (3)
3 EQ - X +E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
114
1 SEISMIC-H (4)
4 EQ - X -E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
115
1 SEISMIC-H (5)
5 EQ + Z +E 1.000

COMB - 0.9 DEAD +

116 9 DL 0.900
1 SEISMIC-H (6)

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 12 of 36

Job No. Sheet No. Rev

Job03.s.2 13 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Comb. Combination L/C Primar Primary L/C Factor

Name y Name
COMB - 0.9 DEAD +
116 6 EQ + Z -E 1.000
1 SEISMIC-H (6)

9 DL 0.900
COMB - 0.9 DEAD +
117
1 SEISMIC-H (7)
7 EQ - Z +E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
118
1 SEISMIC-H (8)
8 EQ - Z -E 1.000

119 COMB - 0.9 DEAD 9 DL 0.900

SelfWeights
L/C Direction Factor Assigned Geometry

R1 Y -1.000 ALL

Nodal Loads
L/C Node FX FY FZ MX MY MZ Type
(kN) (kN) (kN) (kN-m) (kN-m) (kN-m)

64 0.000 18.000 0.000 0.000 0.000 0.000

65 0.000 18.000 0.000 0.000 0.000 0.000
66 0.000 18.000 0.000 0.000 0.000 0.000
70 0.000 18.000 0.000 0.000 0.000 0.000
R1 71 0.000 18.000 0.000 0.000 0.000 0.000
72 0.000 18.000 0.000 0.000 0.000 0.000
76 0.000 18.000 0.000 0.000 0.000 0.000
77 0.000 18.000 0.000 0.000 0.000 0.000
78 0.000 18.000 0.000 0.000 0.000 0.000

Beam Loads
L/C Beam Type Directi Fa Da Fb Db Ecc.
on
(m) (m) (m)
UNI
79 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
80 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
R1
UNI
81 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
82 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 13 of 36

Job No. Sheet No. Rev

Job03.s.2 14 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

L/C Beam Type Directi Fa Da Fb Db Ecc.

on
(m) (m) (m)
UNI
83 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
84 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
85 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
86 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
87 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
88 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
89 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
90 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
91 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
92 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
R1
UNI
93 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
94 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
95 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
128 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
129 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
130 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
132 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
134 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
156 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
166 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)

Floor Loads
L/C Directi Load Min X Max X Min Y Max Y Min Z Max Z
on
(N/mm2) (m) (m) (m) (m) (m) (m)

R1 GY 0.004 0.000 0.000 4.000 5.000 0.000 0.000

R2 GY 0.003 0.000 0.000 4.000 5.000 0.000 0.000

Seismic Loads

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 14 of 36

Job No. Sheet No. Rev

Job03.s.2 15 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

L/C Code Direction Factor DEC ACC

1 UBC 1997 X 1.000 1.000 0.050

2 UBC 1997 X 1.000 1.000 -0.050
3 UBC 1997 X -1.000 1.000 0.050
4 UBC 1997 X -1.000 1.000 -0.050
5 UBC 1997 Z 1.000 1.000 0.050
6 UBC 1997 Z 1.000 1.000 -0.050
7 UBC 1997 Z -1.000 1.000 0.050
8 UBC 1997 Z -1.000 1.000 -0.050

Reference Loads
L/C Ref Name Factor

9 R1 DL -1.000
10 R2 LL -1.000

Nodes
Node X Y Z
(m) (m) (m)

1 0.000 0.000 0.000

2 3.000 0.000 0.000
3 6.000 0.000 0.000
4 0.000 0.000 3.000
5 3.000 0.000 3.000
6 6.000 0.000 3.000
7 0.000 0.000 6.000
8 3.000 0.000 6.000
9 6.000 0.000 6.000
10 0.000 0.000 8.500
11 3.000 0.000 8.500
12 6.000 0.000 8.500
13 0.000 0.000 12.500
14 3.000 0.000 12.500
16 6.000 0.000 11.500
17 0.000 1.500 0.000
18 3.000 1.500 0.000
19 6.000 1.500 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 15 of 36

Job No. Sheet No. Rev

Job03.s.2 16 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Node X Y Z
(m) (m) (m)

20 0.000 1.500 3.000

21 3.000 1.500 3.000
22 6.000 1.500 3.000
23 0.000 1.500 6.000
24 3.000 1.500 6.000
25 6.000 1.500 6.000
26 0.000 1.500 8.500
27 3.000 1.500 8.500
28 6.000 1.500 8.500
29 0.000 1.500 12.500
30 3.000 1.500 12.500
31 5.400 1.500 12.500
32 6.000 1.500 11.500
33 0.000 4.500 0.000
34 3.000 4.500 0.000
35 6.000 4.500 0.000
36 0.000 4.500 3.000
37 3.000 4.500 3.000
38 6.000 4.500 3.000
39 0.000 4.500 6.000
40 3.000 4.500 6.000
41 6.000 4.500 6.000
42 0.000 4.500 8.500
43 3.000 4.500 8.500
44 6.000 4.500 8.500
45 0.000 4.500 12.500
46 3.000 4.500 12.500
47 5.400 4.500 12.500
48 6.000 4.500 11.500
49 0.000 7.500 0.000
50 3.000 7.500 0.000
51 6.000 7.500 0.000
52 0.000 7.500 3.000
53 3.000 7.500 3.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 16 of 36

Job No. Sheet No. Rev

Job03.s.2 17 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Node X Y Z
(m) (m) (m)

54 6.000 7.500 3.000

55 0.000 7.500 6.000
56 3.000 7.500 6.000
57 6.000 7.500 6.000
58 0.000 7.500 8.500
59 3.000 7.500 8.500
60 6.000 7.500 8.500
62 3.000 9.900 8.500
63 6.000 9.900 8.500
64 0.000 8.700 0.000
65 3.000 8.700 0.000
66 6.000 8.700 0.000
70 0.000 9.100 6.000
71 3.000 9.100 6.000
72 6.000 9.100 6.000
76 0.000 8.900 3.000
77 3.000 8.900 3.000
78 6.000 8.900 3.000
79 3.000 7.500 7.250
80 6.000 7.500 7.250
81 3.000 9.900 7.250
82 6.000 9.900 7.250
83 6.000 7.500 11.500
84 4.500 7.500 8.500
85 4.500 7.500 11.500

Beams
Beam Node A Node B Length Property
(m) (rad)

24 1 17 1.500 1 0.000
25 2 18 1.500 1 0.000
26 3 19 1.500 1 0.000
27 4 20 1.500 1 0.000
28 5 21 1.500 1 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 17 of 36

Job No. Sheet No. Rev

Job03.s.2 18 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

29 6 22 1.500 1 0.000
30 7 23 1.500 1 0.000
31 8 24 1.500 1 0.000
32 9 25 1.500 1 0.000
33 10 26 1.500 1 0.000
34 11 27 1.500 1 0.000
35 12 28 1.500 1 0.000
36 13 29 1.500 1 0.000
37 14 30 1.500 1 0.000
39 16 32 1.500 1 0.000
40 17 18 3.000 6 0.000
41 18 19 3.000 6 0.000
42 17 20 3.000 6 0.000
43 18 21 3.000 6 0.000
44 19 22 3.000 6 0.000
45 20 21 3.000 6 0.000
46 21 22 3.000 6 0.000
47 20 23 3.000 6 0.000
48 21 24 3.000 6 0.000
49 22 25 3.000 6 0.000
50 23 24 3.000 6 0.000
51 24 25 3.000 6 0.000
52 23 26 2.500 6 0.000
53 24 27 2.500 6 0.000
54 25 28 2.500 6 0.000
55 26 27 3.000 6 0.000
56 27 28 3.000 6 0.000
57 26 29 4.000 6 0.000
58 27 30 4.000 6 0.000
59 28 32 3.000 6 0.000
60 29 30 3.000 6 0.000
61 30 31 2.400 6 0.000
62 32 31 1.166 6 0.000
63 17 33 3.000 1 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 18 of 36

Job No. Sheet No. Rev

Job03.s.2 19 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

64 18 34 3.000 1 0.000
65 19 35 3.000 1 0.000
66 20 36 3.000 1 0.000
67 21 37 3.000 1 0.000
68 22 38 3.000 1 0.000
69 23 39 3.000 1 0.000
70 24 40 3.000 1 0.000
71 25 41 3.000 1 0.000
72 26 42 3.000 1 0.000
73 27 43 3.000 1 0.000
74 28 44 3.000 1 0.000
75 29 45 3.000 1 0.000
76 30 46 3.000 1 0.000
77 31 47 3.000 1 0.000
78 32 48 3.000 1 0.000
79 33 34 3.000 2 0.000
80 34 35 3.000 2 0.000
81 33 36 3.000 2 0.000
82 34 37 3.000 2 0.000
83 35 38 3.000 2 0.000
84 36 37 3.000 2 0.000
85 37 38 3.000 2 0.000
86 36 39 3.000 2 0.000
87 37 40 3.000 2 0.000
88 38 41 3.000 2 0.000
89 39 40 3.000 2 0.000
90 40 41 3.000 2 0.000
91 39 42 2.500 2 0.000
92 40 43 2.500 2 0.000
93 41 44 2.500 2 0.000
94 42 43 3.000 2 0.000
95 43 44 3.000 2 0.000
96 42 45 4.000 2 0.000
97 43 46 4.000 2 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 19 of 36

Job No. Sheet No. Rev

Job03.s.2 20 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

98 44 48 3.000 2 0.000
99 45 46 3.000 2 0.000
100 46 47 2.400 2 0.000
101 48 47 1.166 2 0.000
102 33 49 3.000 1 0.000
103 34 50 3.000 1 0.000
104 35 51 3.000 1 0.000
105 36 52 3.000 1 0.000
106 37 53 3.000 1 0.000
107 38 54 3.000 1 0.000
108 39 55 3.000 1 0.000
109 40 56 3.000 1 0.000
110 41 57 3.000 1 0.000
111 42 58 3.000 1 0.000
112 43 59 3.000 1 0.000
113 44 60 3.000 1 0.000
118 49 50 3.000 2 0.000
119 50 51 3.000 2 0.000
120 49 52 3.000 2 0.000
121 50 53 3.000 2 0.000
122 51 54 3.000 2 0.000
123 52 53 3.000 2 0.000
124 53 54 3.000 2 0.000
125 52 55 3.000 2 0.000
126 53 56 3.000 2 0.000
127 54 57 3.000 2 0.000
128 55 56 3.000 2 0.000
129 56 57 3.000 2 0.000
130 55 58 2.500 2 0.000
131 56 79 1.250 2 0.000
132 57 80 1.250 2 0.000
133 58 59 3.000 2 0.000
134 59 84 1.500 2 0.000
135 49 64 1.200 5 0.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 20 of 36

Job No. Sheet No. Rev

Job03.s.2 21 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Beam Node A Node B Length Property

(m) (rad)

136 50 65 1.200 5 0.000

137 51 66 1.200 5 0.000
138 60 63 2.400 5 0.000
139 59 62 2.400 5 0.000
141 64 76 3.007 4 0.000
142 76 52 1.400 5 0.000
143 76 70 3.007 4 0.000
144 70 55 1.600 5 0.000
147 72 57 1.600 5 0.000
148 72 78 3.007 4 0.000
149 78 54 1.400 5 0.000
150 78 66 3.007 4 0.000
151 65 77 3.007 4 0.000
152 77 53 1.400 5 0.000
153 77 71 3.007 4 0.000
154 71 56 1.600 5 0.000
155 79 59 1.250 2 0.000
156 80 60 1.250 2 0.000
157 79 80 3.000 3 0.000
158 81 79 2.400 5 0.000
160 62 63 3.000 5 0.000
161 63 82 1.250 5 0.000
162 82 81 3.000 5 0.000
163 62 81 1.250 5 0.000
164 80 82 2.400 5 0.000
165 60 83 3.000 2 0.000
166 84 60 1.500 2 0.000
167 84 85 3.000 4 0.000
168 85 83 1.500 4 0.000
169 83 48 3.000 1 0.000

Sections
Prop Name Area Iyy Izz J Material Source
(cm2) (cm4) (cm4) (cm4)

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 21 of 36

Job No. Sheet No. Rev

Job03.s.2 22 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Prop Name Area Iyy Izz J Material Source

(cm2) (cm4) (cm4) (cm4)
67,500.00 67,500.00 113,906.2 CONCRET
1 Rect 0.30x0.30 900.000 Parametric
8 8 66 E
52,083.33 133,333.3 127,345.1 CONCRET
2 Rect 0.40x0.25 1,000.000 Parametric
6 44 64 E
23,333.33 71,458.33 60,031.87 CONCRET
3 Rect 0.35x0.20 700.000 Parametric
4 6 9 E
17,010.00 64,312.49 46,123.55 CONCRET
4 Rect 0.35x0.18 630.000 Parametric
2 6 5 E
45,572.91 89,322.91 102,039.8 CONCRET
5 Rect 0.35x0.25 875.000 Parametric
8 4 59 E
78,750.01 107,187.5 152,551.3 CONCRET
6 Rect 0.35x0.30 1,050.000 Parametric
6 00 28 E

Materials
Mat Name E Density
(kN/mm2) (kg/m3) (/°C)

1 CONCRETE 21.718 0.170 2,402.604 0.000

Supports
Node X Y Z rX rY rZ
(kN/mm) (kN/mm) (kN/mm) (kN-m/deg) (kN-m/deg) (kN-m/deg)

1 Fixed Fixed Fixed Fixed Fixed Fixed

Combination Load Cases

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 22 of 36

Job No. Sheet No. Rev

Job03.s.2 23 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Comb. Combination L/C Primar Primary L/C Factor

Name y Name

9 DL 1.200
COMB - 1.2 DEAD +
101
0.5 LIVE
10 LL 0.500

9 DL 1.200

COMB - 1.2 DEAD +

102 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (1)

1 EQ + X + E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

103 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (2)

2 EQ + X -E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

104 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (3)

3 EQ - X +E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

105 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (4)

4 EQ - X -E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

106 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (5)

5 EQ + Z +E 1.000

COMB - 1.2 DEAD +

107 0.5 LIVE + 1 9 DL 1.200
SEISMIC-H (6)

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 23 of 36

Job No. Sheet No. Rev

Job03.s.2 24 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Comb. Combination L/C Primar Primary L/C Factor

Name y Name

10 LL 0.500
COMB - 1.2 DEAD +
107 0.5 LIVE + 1
SEISMIC-H (6)
6 EQ + Z -E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

108 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (7)

7 EQ - Z +E 1.000

9 DL 1.200

COMB - 1.2 DEAD +

109 0.5 LIVE + 1 10 LL 0.500
SEISMIC-H (8)

8 EQ - Z -E 1.000

110 COMB - 1.2 DEAD 9 DL 1.200

9 DL 0.900
COMB - 0.9 DEAD +
111
1 SEISMIC-H (1)
1 EQ + X + E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
112
1 SEISMIC-H (2)
2 EQ + X -E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
113
1 SEISMIC-H (3)
3 EQ - X +E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
114
1 SEISMIC-H (4)
4 EQ - X -E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
115
1 SEISMIC-H (5)
5 EQ + Z +E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
116
1 SEISMIC-H (6)
6 EQ + Z -E 1.000

9 DL 0.900
COMB - 0.9 DEAD +
117
1 SEISMIC-H (7)
7 EQ - Z +E 1.000

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 24 of 36

Job No. Sheet No. Rev

Job03.s.2 25 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Comb. Combination L/C Primar Primary L/C Factor

Name y Name

9 DL 0.900
COMB - 0.9 DEAD +
118
1 SEISMIC-H (8)
8 EQ - Z -E 1.000

119 COMB - 0.9 DEAD 9 DL 0.900

SelfWeights
L/C Direction Factor Assigned Geometry

R1 Y -1.000 ALL

Nodal Loads
L/C Node FX FY FZ MX MY MZ Type
(kN) (kN) (kN) (kN-m) (kN-m) (kN-m)

64 0.000 18.000 0.000 0.000 0.000 0.000

Beam Loads
L/C Beam Type Directi Fa Da Fb Db Ecc.
on
(m) (m) (m)
UNI
79 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
80 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
81 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
R1 82 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
83 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
84 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
85 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 25 of 36

Job No. Sheet No. Rev

Job03.s.2 26 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

L/C Beam Type Directi Fa Da Fb Db Ecc.

on
(m) (m) (m)
UNI
86 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
87 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
88 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
89 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
90 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
91 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
92 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
93 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
R1 94 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
95 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
128 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
129 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
130 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
132 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
134 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
156 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)
UNI
166 GY 8.000 0.000 0.000 0.000 0.000
(kN/m)

Floor Loads
L/C Directi Load Min X Max X Min Y Max Y Min Z Max Z
on
(N/mm2) (m) (m) (m) (m) (m) (m)

R1 GY 0.004 0.000 0.000 4.000 5.000 0.000 0.000

R2 GY 0.003 0.000 0.000 4.000 5.000 0.000 0.000

Seismic Loads
L/C Code Direction Factor DEC ACC

1 UBC 1997 X 1.000 1.000 0.050

2 UBC 1997 X 1.000 1.000 -0.050

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 26 of 36

Job No. Sheet No. Rev

Job03.s.2 27 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

L/C Code Direction Factor DEC ACC

3 UBC 1997 X -1.000 1.000 0.050

4 UBC 1997 X -1.000 1.000 -0.050
5 UBC 1997 Z 1.000 1.000 0.050
6 UBC 1997 Z 1.000 1.000 -0.050
7 UBC 1997 Z -1.000 1.000 0.050
8 UBC 1997 Z -1.000 1.000 -0.050

Reference Loads
L/C Ref Name Factor

9 R1 DL -1.000
10 R2 LL -1.000

Y
X
Z Load 1

Whole Structure

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 27 of 36

Job No. Sheet No. Rev

Job03.s.2 28 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

3D Rendered View

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 28 of 36

Job No. Sheet No. Rev

Job03.s.2 29 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

3D Rendered View

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 29 of 36

Job No. Sheet No. Rev

Job03.s.2 30 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

3D Rendered View

Y X
Z
Load 1

Basement Level

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 30 of 36

Job No. Sheet No. Rev

Job03.s.2 31 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y X
Z
Load 1

Ground Floor level

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 31 of 36

Job No. Sheet No. Rev

Job03.s.2 32 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y X
Z
Load 1

Second Floor level

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 32 of 36

Job No. Sheet No. Rev

Job03.s.2 33 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y X
Z
Load 1

Roof Beam

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 33 of 36

Job No. Sheet No. Rev

Job03.s.2 34 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y
X
Z Load 1 : B e n d in g Z : D is p la c e m e n t

Whole Structure Mz 200kN-m:1m Displacements 1000mm:1m 1 EQ + X + E

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 34 of 36

Job No. Sheet No. Rev

Job03.s.2 35 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y
X
Z Load 1 : B e n d in g Z : D is p la c e m e n t

Whole Structure Mz 200kN-m:1m Displacements 1000mm:1m 1 EQ + X + E

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 35 of 36

Job No. Sheet No. Rev

Job03.s.2 36 ed.01
Software licensed to only @::LAVteam::Â®
Connected User: user@edu Non commercial 024
Job Title Part Re Frame.Column and
Proposed One-Storey with Basement Residence Frame f
Beam Design
Client B Date Chd
Sps. Geofrey C. Gerardo & Charon G. Gerardo y
nic 07-Feb-24 jb
File Date Time
Column and Beam Design.STD 07-Feb-2024 17:46

Y
X
Z Load 1 : B e n d in g Z : D is p la c e m e n t

Whole Structure Mz 200kN-m:1m Displacements 1000mm:1m 1 EQ + X + E

07 Feb 2024 06:01:34 PM STAAD.Pro 2023 23.00.01.25 36 of 36

2024

BEAM ANALYSIS
PART 2.A REINFORCED CONCRETE DESIGN

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO
Beam Design:Project Settings Page 1 of 2

PROJECT SETTINGS
Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/7/2024 6:11:52 PM

General and Reinforcement Settings

Material Properties
Concrete Grade : C21 N/sqmm
Steel Grade (Main) : Fy227 N/sqmm
Steel Grade (Shear) : Fy227 N/sqmm
Top / Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Max Aggregate 2 Size : 25 mm
Analysis Materials used : No

Design Settings
Ignore Torsion : No
Flange Beam Considered : None

Rebar Selected
Rebar Used : 10,12,16,20,25,32,40

Main Rebar
Minimum : 16
Maximum : 25

Shear diameter
Minimum : 10
Maximum : 12

SFR Rebar
Minimum : 10
Maximum : 16

Stirrup Spacing
Minimum : 75 mm
Maximum : 150 mm
Spacing RoundOff : 5 mm

Percentage Reinforcement
Minimum : 0.13 %
Maximum : 4 %
Nominal Reinforcement : 0.13 %

file:///C:/Users/user/AppData/Local/Temp/tmp9A04.tmp 2/8/2024
Beam Design:Project Settings Page 2 of 2

Detail Settings
Top Detailing Style : Best Fit
Bottom Detailing Style : Best Fit

Crack Width Settings:

Crack Width ACI 224R-01 Check : No

Curtailment Settings
Top Reinforcement Curtailment Location
End Support : L/4
Clear Cover : 40 mm
Continuous Support : L/4

Bottom Reinforcement Curtailment Location

Mid Span : L/6
End Support : L/4
Continuous Support : L/4
Ductile Beam
Factor of Depth : Dx2

Non Ductile Beam

Factor of Length : L/3
Bending And Axial Force Design Settings : Not Consider
Beam Bar Spacing
Skip maximum spacing criteria between rebar for zero
bending moment : No
Beam Rebar Rebar
Spacing Spacing
Width Nos<=16 Nos>=20
300 4 52 3 80

file:///C:/Users/user/AppData/Local/Temp/tmp9A04.tmp 2/8/2024
Page 2 of 8

29 Cmin = Clear cover to top and bottom reinforcement in 'mm'

30 Cside = Clear cover to side reinforcement in 'mm'
31 c' = Effective cover to reinforcement at compression face in 'mm'
32 d = Effective depth of Beam in 'mm'
33 d' = C/C distance between longitudinal reinforcement along D in 'mm'
34 D = Depth of Beam in 'mm'
35 Es = Modulus of elasticity of steel in 'N/sqmm'
36 f'c = Specified compressive strength of concrete in cylinder in 'N/sqmm'
37 fs = Calculated tensile stress in reinforcement at service loads, 'N/sqmm'
38 Hf = Thickness of Flange in 'mm'
39 hx = Maximum C/C horizontal spacing of hoops legs on all faces in 'mm'
40 Icr = Moment Of Inertia Of concrete crack section
41 l = Effective Length Of Beam (Clear Span) in 'mm'
42 Legs = Number Of legs Of the shear reinforcement
43 Mcr = Cracking Moment
Hogging moments of resistance of member at the joint faces in
44 Mh =
'kNm'
Hogging moments Of resistance Of member at the joint faces in
45 Mpr1 =
'kNm'
Sagging moments Of resistance Of member at the joint faces in
46 Mpr2 =
'kNm'
Sagging moments Of resistance Of member at the joint faces in
47 Ms =
'kNm'
48 Mu = Factored Bending Moment at a section in 'kNm'
Nominal flexural strength Of Singly Reinforced Section At Balance
49 Mubal =
Neutral Axis in 'kNm'
50 Ptmin = Minimum percentage steel As per clause 410.5
51 PtPrv = Provided percentage steel
52 Stirrup = Bar mark representing shear stirrup
53 S = spacing Of confining links in 'mm'
54 SCalc = Stirrup spacing calculated As per Asv in 'mm'
55 Sprv = Stirrup spacing provided in 'mm'
56 Tcr = Cracking torque under pure Torsion in 'kNm'
57 Tu = Factored Torsional Moment at a section in 'kNm'
58 VD+L = Shear due to Dead and Live load in Simply supported beam in 'kN'
59 Ve = Earthquake induced shear in 'kNm'
60 φVc = Reduced Shear strength provided by concrete in 'kN'
Reduced Shear strength provided by concrete for sway condition in
61 φVc sway =
'kN'
62 Vu = Factored Shear Force at a section in 'kN'
63 Vu-A1(sway Left) = VD+Lleft - (Mpr1left + Mpr2right / L ) in 'kN'
64 Vu-A2(sway Left) = VD+Lleft + (Mpr2left + Mpr1right / L ) in 'kN'
65 Vu-B1(sway Right) = VDLRight - (Mpr1left + Mpr2right / L ) in 'kN'
66 Vu-B2(sway Right) = VDLRight + (Mpr2left + Mpr1right / L ) in 'kN'
67 Vud = Design Shear Force due to sway in 'kN'
68 Vs = Nominal shear strength provided by shear reinforcement in 'kN'
Nominal shear strength provided by shear reinforcement for sway
69 Vs Sway =
condition in 'kN'

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 3 of 8

70 Vu sway = Max (Vu-A1,Vu-A2) & (Vu-B1,Vu-B2) in 'kN'

71 y = Neutral axis depth.
72 Φ = Strength reduction factor

All Forces are in 'kN', 'kNm', Stress in 'N/sqmm' & Dimension are in 'mm'.

Code References
Sr.No. Item Clause / Table
407.3.3.1, 408.3.3.1,
1. Ptmax :
409.3.3.1
2. As,min (flex) (B) : 409.6.1.1, 409.6.1.2
3. As,min : 409.6.1.3
4. Vc : 422.5
5. Asv : 422.5.10.5 & 422.6.7
6. Min Shear Reinf : 409.6.3.1
7. Max Stirrup Spacing : 409.7.62
8. Shear Reinf - Torsion : 422.7.3.1
Side Face
9. : 409.7.2.3
Reinforcement
10. Tcr : 409.5.4.1
11. fs,perm : 424.3.2.1
12. fc,perm : A.3.1 (ACI 318-99)
Eq 1-2 ( ACI 224R-
13. Wcr :
01)
14. Ptmin : 418.6.3.1
15. Asmin : 418.6.3.1
16. Sclc : 418.6.4.1 & 418.6.4.4
Strength Reduction
17. factor for tension : 21.2.2
controlled section

Group : G1
Beam No : B1
Analysis Reference (Member) : 40 (1.5 m)
Beam Length : 3000 mm
Breadth (B) : 300 mm
Depth (D) : 350 mm
Effective Depth (d) : 300 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Grade Of Steel - Flexural Design : Fy227 N/sqmm
Grade Of Steel - Shear Design : Fy227 N/sqmm
Grade Of Steel - Torsion Design : Fy227 N/sqmm
Top/Bottom Clear Cover (Cmin) : 40 mm

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 3 of 8

70 Vu sway = Max (Vu-A1,Vu-A2) & (Vu-B1,Vu-B2) in 'kN'

71 y = Neutral axis depth.
72 Φ = Strength reduction factor

All Forces are in 'kN', 'kNm', Stress in 'N/sqmm' & Dimension are in 'mm'.

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 5 of 8

Left Mid Right

Critical L/C - RCDC 30 30 30
PtPrv (%) 0.67 0.67 0.67
Vu (kN) 4.32 2.51 5.93
Mu-Sect (kNm) 1.1 0.71 3.5
Φ Vc (kN) 56.8 56.8 53.02
Vs (kN) - - -
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 462.56
Tu (kNm) 0.04 0.04 0.04
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 462.56
Asv Reqd (sqmm/m) 462.56 462.56 462.56
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 125 125 125
SPrv (mm) 125 125 125
Av Total Prv (sqmm/m) 1256.64 1256.64 1256.64

Maximum Spacing Criteria

Basic
0.33 Sqrt(f'c)Bd = 135.06 kN
Left Mid Right
Vs (kN) 0 0 0
Vs <= 0.33 Vs <= 0.33 Vs <= 0.33
Check
Sqrt(f'c)Bd Sqrt(f'c)Bd Sqrt(f'c)Bd
Spc1 (mm) d/2=150 d/2=150 d/2=150
Spc2 (mm) 600 600 600

For Torsion
(X1 = 230, Y1 = 280)
Spc3 = 300 mm
Spc4=(X1+Y1)/4 = 128 mm

Skin reinforcement

Beam Width = 300 mm

Beam Depth = 350 mm
Depth = 350 <= 900, Hence Skin Reinforcement is not required.

Group : G1
Beam No : B2
Analysis Reference (Member) : 41 (1.5 m)
Beam Length : 3000 mm
Breadth (B) : 300 mm

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 6 of 8

Depth (D) : 350 mm

Effective Depth (d) : 300 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Grade Of Steel - Flexural Design : Fy227 N/sqmm
Grade Of Steel - Shear Design : Fy227 N/sqmm
Grade Of Steel - Torsion Design : Fy227 N/sqmm
Top/Bottom Clear Cover (Cmin) : 40 mm
Side Clear Cover : 40 mm
Es : 2x10^5 N/sqmm
Mubal : 114.45 kNm
As,min (flex) (B) : 555.07 sqmm
As,nominal (Bn) : 117 sqmm
As,min(user input)(B') : 117 sqmm
Maximum percentage steel (User
: 4 %
Defined)
Maximum percentage steel
: 2.468 %
(Tension Controlled section)
Min
Maximum percentage steel :
(4 ,2.468)
: 2.468 %

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 208 103 209 104 208 103
Critical L/C - RCDC 16 3 17 4 16 3
Mu (kNm) 16.42 5.89 14.48 8.83 8.36 12.5
As (flex) (sqmm) (C) 273.27 96.8 240.33 145.65 137.72 207.05
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) 0.68 0.66 0.38 0.39 0.68 0.66
Tcr/4 (kNm) 2.4 2.4 2.4 2.4 2.4 2.4
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 363.45 128.74 319.64 193.71 183.16 275.38
AstPrv (sqmm) 603.18 603.18 603.18 603.18 603.18 603.18
Reinforcement Provided 3-#16 3-#16 3-#16 3-#16 3-#16 3-#16

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 7 of 8

Compression reinforcement required for bending

A = Asc (flex) =
moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement calculated
C = As (flex) =
at a given section
Distributed longitudinal torsional reinforcement at
D = Al (Dist) =
section considered
E = AstCrack = Area of reinforcement required for Crackwidth
Ast (Dist) (sqmm) = Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B + 2D))

For Transverse Reinf

Left Mid Right
Critical L/C - RCDC 30 30 30
PtPrv (%) 0.67 0.67 0.67
Vu (kN) 5.35 1.93 4.9
Mu-Sect (kNm) 2.69 0.96 2
Φ Vc (kN) 53.71 53.78 54.75
Vs (kN) - - -
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 462.56 462.56 462.56
Tu (kNm) 0.01 0.01 0.01
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 462.56 462.56 462.56
Asv Reqd (sqmm/m) 462.56 462.56 462.56
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 125 125 125
SPrv (mm) 125 125 125
Av Total Prv (sqmm/m) 1256.64 1256.64 1256.64

Maximum Spacing Criteria

Basic
0.33 Sqrt(f'c)Bd = 135.06 kN
Left Mid Right
Vs (kN) 0 0 0
Vs <= 0.33 Vs <= 0.33 Vs <= 0.33
Check
Sqrt(f'c)Bd Sqrt(f'c)Bd Sqrt(f'c)Bd
Spc1 (mm) d/2=150 d/2=150 d/2=150
Spc2 (mm) 600 600 600

For Torsion
(X1 = 230, Y1 = 280)
Spc3 = 300 mm
Spc4=(X1+Y1)/4 = 128 mm

Skin reinforcement

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 8 of 8

Beam Width = 300 mm

Beam Depth = 350 mm
Depth = 350 <= 900, Hence Skin Reinforcement is not required.

file:///C:/Users/user/AppData/Local/Temp/tmpBC25.tmp 2/8/2024
Page 1 of 5

BEAM DESIGN CALCULATION

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/7/2024 6:11:52 PM
Level Designed : 7.5 m

Sr.No. Symbol Definitions

1 α = Angle formed with horizontal line along length of Beam
Cross sectional area of structural member measures to the outside
2 Ach =
edge of transverse reinforcement in 'sqmm'
3 Ag = Cross sectional area of concrete in 'sqmm'
Total cross sectional area transverse reinforcement (including cross
4 Ash =
ties) within spacing S in 'sqmm'
5 Avd = Area of diagonal reinforcement in coupler beam in 'sqmm'
6 As = Area of Tension reinforcement required in 'sqmm'
7 As,min = Minimum area of flexural reinforcement in 'sqmm'
8 As,nominal = Nominal area of reinforcement in 'sqmm'
Area of longitudinal reinforcement required to resist torsion in
9 Al =
'sqmm'
Area of longitudinal reinforcement required on each face to resist
10 Al,face =
torsion in 'sqmm'
11 At Torsion = Area of closed stirrups resisting torsion in 'sqmm'
Area of longitudinal reinforcement provided at given section in
12 AstPrv =
'sqmm'
13 Av = Area of shear reinforcement required per meter length in 'sqmm'
Minimum area of shear reinforcement in as per clause 411.4.6.1 in
14 Av,min =
'sqmm'
Minimum area of longitudinal torsional reinforcement as per clause
15 Al,min =
411.5.5.3 in 'sqmm'
Total area of shear reinforcement required, including that for torsion
16 Av Total Reqd =
in 'sqmm'
Total area of shear reinforcement provided, including that for
17 Av Total Prv =
torsion in 'sqmm'
18 Ao = Gross area enclosed by shear flow path in 'sqmm'
Area enclosed by centerline of the outermost closed transverse
19 Aoh =
torsional reinforcement as per clause 411.5.3.1 in 'sqmm'
Total area of longitudinal reinforcement calculated at a given
20 Ast =
section in 'sqmm'
21 Asr = Area of Skin reinforcement calculated for given section in 'sqmm'
Area of Compression reinforcement required for doubly reinforced
22 Asc =
section or if torsion exists in 'sqmm'
23 Asv Reqd Sway = Area of shear reinforcement required for sway condition in 'sqmm'
24 b = Width of the Beam in 'mm'
25 bw = Width of Web ( For flanged Beam ) in 'mm'
26 b' = C/C distance between longitudinal reinforcement along B in 'mm'
27 bc = Oustside dimension of transverse reinforcement in 'mm'
28 Cc = Effective Cover to tension reinforcement in 'mm'

file:///C:/Users/user/AppData/Local/Temp/tmp7759.tmp 2/8/2024
Page 2 of 5

29 Cmin = Clear cover to top and bottom reinforcement in 'mm'

file:///C:/Users/user/AppData/Local/Temp/tmp7759.tmp 2/8/2024
Page 3 of 5

70 Vu sway = Max (Vu-A1,Vu-A2) & (Vu-B1,Vu-B2) in 'kN'

71 y = Neutral axis depth.
72 Φ = Strength reduction factor

All Forces are in 'kN', 'kNm', Stress in 'N/sqmm' & Dimension are in 'mm'.

Group : G4
Beam No : B7
Analysis Reference (Member) : 157 (7.5 m)
Beam Length : 3000 mm
Breadth (B) : 200 mm
Depth (D) : 350 mm
Effective Depth (d) : 300 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam
Grade Of Concrete (f'c) : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Grade Of Steel - Flexural Design : Fy227 N/sqmm
Grade Of Steel - Shear Design : Fy227 N/sqmm
Grade Of Steel - Torsion Design : Fy227 N/sqmm
Top/Bottom Clear Cover (Cmin) : 40 mm

file:///C:/Users/user/AppData/Local/Temp/tmp7759.tmp 2/8/2024
Page 4 of 5

Side Clear Cover : 40 mm

Es : 2x10^5 N/sqmm
Mubal : 76.3 kNm
As,min (flex) (B) : 370.04 sqmm
As,nominal (Bn) : 78 sqmm
As,min(user input)(B') : 78 sqmm
Maximum percentage steel (User
: 4 %
Defined)
Maximum percentage steel
: 2.468 %
(Tension Controlled section)
Min
Maximum percentage steel :
(4 ,2.468)
: 2.468 %

For Longitudinal Reinf

Beam Bottom Beam Top
Left Mid Right Left Mid Right
Critical L/C - Analysis 207 217 209 209 207 207
Critical L/C - RCDC 15 25 17 17 15 15
Mu (kNm) 4.45 1.39 5.11 1.51 1.65 1.63
As (flex) (sqmm) (C) 73.23 22.76 84.09 24.76 26.98 26.71
Asc (flex) (sqmm) (A) - - - - - -
Tu (kNm) 0.05 0.03 0.03 0.03 0.05 0.05
Tcr/4 (kNm) 1.26 1.26 1.26 1.26 1.26 1.26
Al, min(sqmm)(Tor.) (D) - - - - - -
Al (sqmm) (Tor.) (E) - - - - - -
Al (Dist) (sqmm) (D) - - - - - -
Ast (sqmm) 97.4 78 111.84 78 78 78
AstPrv (sqmm) 402.12 402.12 402.12 402.12 402.12 402.12
Reinforcement Provided 2-D16 2-D16 2-D16 2-D16 2-D16 2-D16

Note: Calculation of Ast

Ast = Max {B, C+D, A+D} (for Mu > 0 and C x 1.33 > B)
Ast = Max{B', C x 1.33 + D, A+D} (for Mu > 0 and C x 1.33 < B)
Ast = Bn (for Mu = 0)
Where,
Compression reinforcement required for bending
A = Asc (flex) =
moment
B = As,min (flex) = Min area of flexural reinforcement
Bn = As,nominal = Nominal area of reinforcement
Total area of longitudinal reinforcement calculated
C = As (flex) =
at a given section
Distributed longitudinal torsional reinforcement at
D = Al (Dist) =
section considered
E = AstCrack = Area of reinforcement required for Crackwidth
Ast (Dist) (sqmm) = Max(Al,min (Tor), Al (Tor)) x ((2B) / (2B + 2D))

For Transverse Reinf

file:///C:/Users/user/AppData/Local/Temp/tmp7759.tmp 2/8/2024
Page 5 of 5

Left Mid Right

Critical L/C - RCDC 30 30 30
PtPrv (%) 0.67 0.67 0.67
Vu (kN) 3.35 1.2 3.48
Mu-Sect (kNm) 1.64 0.51 1.83
Φ Vc (kN) 35.88 36.37 35.67
Vs (kN) - - -
Aoh (sqmm) - - -
At (sqmm/m) - - -
Av (sqmm/m) 308.37 308.37 308.37
Tu (kNm) 0.02 0.02 0.02
At Torsion (sqmm/m) 0 0 0
Av Total Reqd (sqmm/m) 308.37 308.37 308.37
Asv Reqd (sqmm/m) 308.37 308.37 308.37
Legs 2 2 2
Stirrup Rebar 10 10 10
SCalc (mm) 100 100 100
SPrv (mm) 100 100 100
Av Total Prv (sqmm/m) 1570.8 1570.8 1570.8

Maximum Spacing Criteria

Basic
0.33 Sqrt(f'c)Bd = 90.04 kN
Left Mid Right
Vs (kN) 0 0 0
Vs <= 0.33 Vs <= 0.33 Vs <= 0.33
Check
Sqrt(f'c)Bd Sqrt(f'c)Bd Sqrt(f'c)Bd
Spc1 (mm) d/2=150 d/2=150 d/2=150
Spc2 (mm) 600 600 600

For Torsion
(X1 = 130, Y1 = 280)
Spc3 = 300 mm
Spc4=(X1+Y1)/4 = 102 mm

Skin reinforcement

Beam Width = 200 mm

Beam Depth = 350 mm
Depth = 350 <= 900, Hence Skin Reinforcement is not required.

file:///C:/Users/user/AppData/Local/Temp/tmp7759.tmp 2/8/2024
Page 1 of 15

BEAM DESIGN SUMMARY

Beam No : B1
Group No : G1
Analysis Reference(Member) 7.5 m : 118
Breadth : 250 mm
Depth : 400 mm
Concrete Grade : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Top/Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam

Flexure Design
Beam Bottom Beam Top
Left Mid Right Left Mid Right
Mu (kNm) 10.7 4.2 13 10.39 7.83 5.27
PtClc (%) 0.259 0.13 0.316 0.251 0.189 0.13
AstCalc (sqmm) 213.74 107.25 260.5 207.44 155.92 107.25
Ast Prv (sqmm) 402.12 402.12 402.12 402.12 402.12 402.12
Reinforcement 2-D16 2-D16 2-D16 2-D16 2-D16 2-D16

Shear Design
Left Mid Right
Vu (kN) 3.66 2.85 6.1
Asv Torsion (sqmm/m) 0 0 0
Asv Reqd (sqmm/m) 385.46 385.46 385.46
Asv Prv (sqmm/m) 1256.64 1256.64 1256.64
Reinforcement 2L-D10 @ 125 2L-D10 @ 125 2L-D10 @ 125

SFR : -

Beam No : B2
Group No : G1
Analysis Reference(Member) 7.5 m : 119
Breadth : 250 mm
Depth : 400 mm
Concrete Grade : C21 N/sqmm

file:///C:/Users/user/AppData/Local/Temp/tmpCC61.tmp 2/8/2024
Page 2 of 15

Grade Of Steel (Main) : Fy227 N/sqmm

Grade Of Steel (Shear) : Fy227 N/sqmm
Top/Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam

Flexure Design
Beam Bottom Beam Top
Left Mid Right Left Mid Right
Mu (kNm) 13.03 4.2 10.68 5.22 7.81 10.4
PtClc (%) 0.316 0.13 0.259 0.13 0.189 0.252
AstCalc (sqmm) 261.1 107.25 213.47 107.25 155.54 207.72
Ast Prv (sqmm) 402.12 402.12 402.12 402.12 402.12 402.12
Reinforcement 2-D16 2-D16 2-D16 2-D16 2-D16 2-D16

Shear Design
Left Mid Right
Vu (kN) 5.96 2.71 3.79
Asv Torsion (sqmm/m) 0 0 0
Asv Reqd (sqmm/m) 385.46 385.46 385.46
Asv Prv (sqmm/m) 1256.64 1256.64 1256.64
Reinforcement 2L-D10 @ 125 2L-D10 @ 125 2L-D10 @ 125

SFR : -

Beam No : B3
Group No : G2
Analysis Reference(Member) 7.5 m : 123
Breadth : 250 mm
Depth : 400 mm
Concrete Grade : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Top/Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam

Flexure Design

Beam Bottom Beam Top

Left Mid Right Left Mid Right
Mu (kNm) 10.33 3.98 12.84 10.04 7.6 4.76
PtClc (%) 0.25 0.13 0.312 0.243 0.183 0.13
AstCalc (sqmm) 206.33 107.25 257.1 200.45 151.24 107.25
Ast Prv (sqmm) 402.12 402.12 402.12 402.12 402.12 402.12
Reinforcement 2-D16 2-D16 2-D16 2-D16 2-D16 2-D16

file:///C:/Users/user/AppData/Local/Temp/tmpCC61.tmp 2/8/2024
Page 14 of 17

Reinforcement 2-#16 2-#16 2-#16 3-#16 3-#16 3-#16

Shear Design
Left Mid Right
Vu (kN) 6.83 10.11 10.25
Asv Torsion (sqmm/m) 0 0 0
Asv Reqd (sqmm/m) 385.46 385.46 385.46
Asv Prv (sqmm/m) 1256.64 1256.64 1256.64
Reinforcement 2L-D10 @ 125 2L-D10 @ 125 2L-D10 @ 125

SFR : -

Beam No : B20
Group No : G8
Analysis Reference(Member) 4.5 m : 93
Breadth : 250 mm
Depth : 400 mm
Concrete Grade : C21 N/sqmm
Grade Of Steel (Main) : Fy227 N/sqmm
Grade Of Steel (Shear) : Fy227 N/sqmm
Top/Bottom Clear Cover : 40 mm
Side Clear Cover : 40 mm
Design Code : NSCP C101 - 2015
Beam Type : Regular Beam

Flexure Design
Beam Bottom Beam Top
Left Mid Right Left Mid Right
Mu (kNm) 6.16 6.5 5.32 17.74 5 19.89
PtClc (%) 0.148 0.157 0.13 0.433 0.13 0.487
AstCalc (sqmm) 122.46 129.18 107.25 357.53 107.25 401.86
Ast Prv (sqmm) 402.12 402.12 402.12 603.18 603.18 603.18
Reinforcement 2-#16 2-#16 2-#16 3-#16 3-#16 3-#16

Shear Design
Left Mid Right
Vu (kN) 5.3 14.97 23.24
Asv Torsion (sqmm/m) 0 0 0
Asv Reqd (sqmm/m) 385.46 385.46 385.46
Asv Prv (sqmm/m) 1256.64 1256.64 1256.64
Reinforcement 2L-D10 @ 125 2L-D10 @ 125 2L-D10 @ 125

SFR : -

Beam No : B21

file:///C:/Users/user/AppData/Local/Temp/tmp7E2A.tmp 2/8/2024
2024

COLUMN ANALYSIS
PART 2.B . REINFORCED CONCRETE DESIGN

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO .
Page 1 of 2

PROJECT SETTINGS
Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Column-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/7/2024 6:11:52 PM

Design Settings
Ductile Design : Yes
Type of Frame : Special
Response Modification Coefficient : 3
Shear Walls With Boundary Elements : Yes
Live Load Reduction : No
Columns Braced : No
Optimize Design : Yes
Detail shear wall with equi-spaced Bar arrangement : No
Check Modulus of Rupture for columns with Axial
: Yes
Tension
Ignoring intermediate beams for merged levels : No
SW Definition(D/B) >= 4
Design Type : Resultant Moment (Combined Action)
Maximum Capacity Ratio : 1
Strength Reduction Factor φ (Shear) : 0.6

Crack Width Settings

Crack Width ACI 224R-01 Check : No

Analysis Materials Used : No

Minimum Eccentricity Check : Simultaneously(Both Axes)

Reinforcement Settings
Column % Reinforcement
Minimum : 1
Maximum : 4

Shear Wall % Reinforcement

Minimum : 0.25
Maximum : 4

Longitudinal Bar Spacing

Minimum : 75 mm
Maximum : 300 mm

file:///C:/Users/user/AppData/Local/Temp/tmp9768.tmp 2/7/2024
Page 2 of 2

Preferred Bar Spacing

Equi Spaced Arr. : 125 mm
Zone1 : 75 mm
Zone2 : 100 mm
Mid Zone : 200 mm

Link Spacing
Minimum : 125 mm
Maximum : 300 mm

Available Rebar
Rebar. Used : 10,12,16,20,25,40

Column Rebar
Minimum : 16
Maximum : 20

Shear Wall Rebar

Minimum : 10
Maximum : 25

Link Rebar
Minimum : 10
Maximum : 12

Links Style
Columns : Hoops
Walls : Ties
Tie Style : Open

Main Link with Boundary Element : Master Link

Round Off Factor

Spacing Round Off : 25 mm
Zone Round Off : 25 mm

Zone Bar Settings

Zonal
Equi-Spaced No.
Edge Zonal Length No.of Bars/Spc(EF)
of Bars/Spc
Length Z1 Z2 Mid Z1 Z2 Mid
Nos Spc Nos Spc Nos Spc Nos Spc
250 2 118 0 0 0 0 0 0 0 0 0
300 3 84 0 0 0 0 0 0 0 0 0
350 3 109 0 0 0 0 0 0 0 0 0
3050 25 122 475 475 1150 6 84 5 95 5 192

file:///C:/Users/user/AppData/Local/Temp/tmp9768.tmp 2/7/2024
Column Design: Design Calculations Page 1 of 34

COLUMN DESIGN CALCULATIONS

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Column-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/7/2024 6:11:52 PM

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 2 of 34

longitudinal tension reinforcement in 'mm'

Distance from extreme compression fiber to centroid of
22 d' =
longitudinal compression reinforcement,'mm'
23 Ec = Modulus of elasticity of concrete in 'N/sqmm'
24 EI = Flexural stiffness of compression member in 'Nsqmm'
Specified compressive strength of concrete cylinder in
25 f'c =
'N/sqmm'
26 fy = Specified yield strength of reinforcement in 'N/sqmm'
Specified yield strength fy of transverse reinforcement in
27 fyt =
'N/sqmm'
Height of entire wall from base to top of wall segment
28 hw =
considered in 'mm'
29 Icr = Moment of Inertia of concrete crack section
30 k = Effective length factor for compression member
Length of compression member in a frame, measured
31 lc =
center-to-center of the joints in the frame in 'mm'
Moment of inertia of gross concrete section about
32 lg =
centroidal axis neglecting reinforcement in 'mm4'
33 lw = Length of entire wall in 'mm'
Un-supported length for compression member along D in
34 lux =
'mm'
Un-supported length for compression member along B in
35 luy =
'mm'
Moment capacity of section for a given NA angle at design
36 MCap =
Pu in 'kNm '
37 Mcr = Cracking Moment
Resultant design moment at a given load angle to local
38 MRes =
major axis in 'kNm '
Factored moment amplified for the effects of member
39 Mc =
curvature used for design of compression member in 'kNm'
Factored moment modified to account for effect of axial
40 Mm =
compression in 'kNm'
Factored moment along D of column modified to account
41 Mmx =
for effect of axial compression in 'kNm'
Factored moment along D of column modified to account
42 Mmy =
for effect of axial compression in 'kNm'
43 Mur = Sqrt (Mmy^2 + Mmx^2) for circular column in 'kNm'
Factored moment acting on a section along D in 'kNm'
44 Mux =
from Analysis (Momemt About Major Axis)
Factored moment acting on a section along B in 'kNm'
45 Muy =
from Analysis (Momemt About Minor Axis)
Smaller factored end moment on a compression member in
46 M1 =
'kNm'
Factored end moment on a compression member at the end
47 M1ns = at which M1 acts, due to loads that cause no appreciable
sidesway in 'kNm'
Factored end moment on compression member at the end at
48 M1s = which M1 acts, due to loads that cause appreciable
sidesway in 'kNm'
Smaller factored end moment on a compression member
49 M1sldr =
due to slenderness effect in 'kNm'
Larger factored end moment on compression member in
50 M2 =
'kNm'

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 3 of 34

Minimum value of moment M2 as per minimum

51 M2min =
eccentricity of column
Factored end moment on compression member at the end at
52 M2ns = which M2 acts, due to loads that cause no appreciable
sidesway in 'kNm'
Factored end moment on compression member at the end at
53 M2s = which M2 acts, due to loads that cause appreciable
sidesway in 'kNm'
Largest factored end moment on a compression member
54 M2sldr =
due to slenderness effect in 'kNm'
55 Mnb = Flexure Capacity for Beam
56 Mnc = Flexure Capacity for Column
Nominal Flexure strength of column at top along depth in
57 Mnty =
'kNm'
Nominal Flexure strength of column at bottom along depth
58 Mnby =
in 'kNm'
Nominal Flexure strength of column at top along width in
59 Mntx =
'kNm'
Nominal Flexure strength of column at bottom along width
60 Mnbx =
in 'kNm'
Factored axial force normal to cross section occurring
61 Nu =
simultaneously with Vu in 'kN'
62 Pc = Critical buckling load in 'kN'
Ratio of area of distributed transverse reinforcement to
63 pt =
gross concrete area perpendicular to that reinforcement
64 Pω = Ratio of As to B x d
65 Q = Stability index for storey
Radius of gyration of cross section of a compression
66 r =
member in 'mm'
67 Vc = Nominal shear strength provided by concrete in 'kN'
68 Vj = Shear Force acting at the joint in 'kN'
69 Vn = Nominal shear strength in 'kN'
70 Vn' = Nominal shear strength at joint in 'kN'
nominal shear strength provided by shear reinforcement in
71 Vs =
'kN'
Maximum nominal shear strength provided by shear
72 Vs permissible =
reinforcement in 'kN'
73 Vur = Factored resultant shear force acting on the column in 'kN'
74 Vus = Factored horizontal shear in a storey in 'kN'
75 Vux = Factored shear at section along B in 'kN' (From Analysis)
Shear induced due to column flexural capacity along
76 Vux1 =
width,'kN'
77 Vux2 = Shear due to enhanced earthquake factor along width, 'kN'
78 Vuy = Factored shear at section along D in 'kN' (From Analysis)
Shear induced due to column flexural capacity along depth,
79 Vuy1 =
'kN'
80 Vuy2 = Shear due to enhanced earthquake factor along depth, 'kN'
81 y = Neutral axis depth.
It is a Neutral Axis angle corresponding to load angle to
82 β =
find out MCap
Center to center spacing of transverse reinforcement within
83 So =
the length lo in 'mm'

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 4 of 34

Length, measured from joint face along axis of member,

84 lo = over which special transverse reinforcement must be
provided in 'mm'

Code References:
NSCP C101 - 2015
Sr.No Element Clause / table
Minimum area of longitudinal reinforcement for
1 : 418.7.4
column
Maximum area of longitudinal reinforcement for
2 : 418.7.4
column
Minimum longitudinal and transverse
3 : 418.10.2.1
reinforcement for wall
4 Minimum diameter of transverse ties : 425.7.2
5 Minimum spacing of transverse ties : 425.7.2
Maximum spacing of longitudinal and transverse
6 : 418.10.2.1
reinforcement for wall
7 Applicability of boundary element : 418.10.6
Area and spacing of special confining
8 : 418.7.5
reinforcement
9 Slenderness Moments : 406.2.5
10 Shear Strength provided by concrete for column : 422.5.5
11 Design of shear for non-ductile wall : 411.5.4
12 Design of shear for ductile wall : 418.10.4.1
13 Minimum Flexural Strength of Columns : 418.7.3
14 Shear Check at Column Joint : 418.8.4.1
15 Shear Strength of Column : 418.3.3, 418.4 & 418.6.5
16 fs,perm : 424.3.2.1
17 fc,perm : A.3.1 (ACI 318-99)
18 Wcr : Eq 1-2 ( ACI 224R-01)
Sway Calculation (Stability Index)
For Global-X Direction
Level Load Storey Gravity Relative Storey Stability Sway
Combination Height Load P Displacements Shear Index (Q) Condition
Analysis (m) (kN) (mm) (kN)
B x C / (A x
A B C D
D)
0 m to 1.5
207 1.5 524.66 0.68 121.02 0.002 Non Sway
m
1.5 m to
208 3 974.58 3.34 112.45 0.01 Non Sway
4.5 m
4.5 m to
207 3 81.69 2.8 57.31 0.001 Non Sway
7.5 m
7.5 m to
209 1.2 80.06 2.53 9.06 0.019 Non Sway
8.7 m
8.7 m to 208 0.2 67.31 0.45 7.37 0.021 Non Sway

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 5 of 34

8.9 m
8.9 m to
209 0.2 79.91 1.09 9.39 0.046 Non Sway
9.1 m
9.1 m to
102 0.8 -21.04 0.96 6.44 -0.004 Non Sway
9.9 m

For Global-Y Direction

Level Load Storey Gravity Relative Storey Stability Sway
Combination Height Load P Displacements Shear Index (Q) Condition
Analysis (m) (kN) (mm) (kN)
B x C / (A x
A B C D
D)
0 m to 1.5
211 1.5 524.66 0.01 0 0 Non Sway
m
1.5 m to
211 3 974.58 0.08 0 0 Non Sway
4.5 m
4.5 m to
211 3 81.69 0.05 0.43 0.003 Non Sway
7.5 m
7.5 m to
213 1.2 84.32 6.25 1.85 0.237 Sway
8.7 m
8.7 m to
213 0.2 67.49 0.01 15.33 0 Non Sway
8.9 m
8.9 m to
212 0.2 84.35 0.09 1.86 0.02 Non Sway
9.1 m
9.1 m to
106 0.8 -21.04 6.13 0.61 -0.265 Non Sway
9.9 m

General Data
Column No. : C11
Level : 0 m To 1.5 m
Frame Type = Lateral
Response Modification Coefficient = 3
Design Code = NSCP C101 - 2015
Grade Of Concrete (f'c) = C21 N/sqmm
Grade Of Steel (Main) = Fy276 N/sqmm
Grade Of Steel (Shear) = Fy276 N/sqmm
Grade Of Steel - Flexural Design = Fy276 N/sqmm
Grade Of Steel - Shear Design = Fy276 N/sqmm
Consider Ductile = Yes
Type of Frame = Special
Column B = 350 mm
Column D = 350 mm
Clear Cover, Cc = 40 mm
Clear Floor Height @ lux = 1150 mm
Clear Floor Height @ luy = 1150 mm
No Of Floors = 1
No Of Columns In Group = 1
Strength Reduction Factor φ (Shear) = 0.6

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 6 of 34

Flexural Design (Analysis Forces)

Analysis Reference No. = 31
Critical Analysis Load Combination : 216
Load Combination = [24] : 1.38 (LOAD 9: DL) +(LOAD 2: EQ + X -E)
Critical Location = Bottom Joint
Put = 78.09 kN
Muxt = -4.44 kNm
Muyt = 0.57 kNm
Vuxt = 0.56 kN
Vuyt = 10.95 kN
Pub = 73.7 kN
Muxb = 11.99 kNm
Muyb = -0.26 kNm
Vuxb = 0.56 kN
Vuyb = 10.95 kN

Effective Length Calculation

Calculation Along Major Axis Of Column
Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
Bottom 71.27 No Beam No Beam - - 1
3000 x 300 x 3000 x 300 x
Top 71.27 30.55 30.55 1.75
350 350
User Defined Effective Length Factor = 1

Calculation Along Minor Axis Of Column

Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
Bottom 71.27 No Beam No Beam - - 1
2500 x 300 x 3000 x 300 x
Top 71.27 36.66 30.55 1.591
350 350
User Defined Effective Length Factor = 1

Check For Stability Index

Along D
Q = 0.002
0.002< 0.05, Column shall be designed as non-sway frame (Braced)

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 7 of 34

Along B
Q = 0.01
0.01< 0.05, Column shall be designed as non-sway frame (Braced)

Slenderness Check
Column Is Braced Along D
Slenderness Check along D
k = 1
r = 101.04 mm
Kluy /r = 11.38
M1 = -4.44 kNm
M2 = 11.99 kNm
Min (40, 34 - 12 x (M1/M2)) = 38.44
11.38 < 38.44, Column not slender along D
Column Is Braced Along B
Slenderness Check along B
k = 1
r = 101.04 mm
Klux /r = 11.38
M1 = -0.26 kNm
M2 = 0.57 kNm
Min (40, 34 - 12 x (M1/M2)) = 39.45
11.38 < 39.45, Column not slender along B

Calculation of Design Moment

Direction Manalysis Msldr or Mc Mdesign-final
A B C
Major Axis Mux (top) -4.44 - -4.44
Major Axis Mux (bottom) 11.99 - 11.99
Minor Axis Muy (top) 0.57 - 0.57
Minor Axis Muy (bottom) -0.26 - -0.26

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = 73.7 kN
Mux = 11.99 kNm
Muy = -0.26 kNm

Φ Pn, Max Check

Critical Analysis Load Combination = 213

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 8 of 34

[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD

Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Critical Location = Top Joint
Pu = 115.79 kN
Mux = 0.07 kNm
Muy = 5.01 kNm
Pt Calculated = 1.31
φ Pn, Max = 1335.87 kN
Pu < φ Pn, Max Hence, OK

Minimum Ast Calculation

Critical Analysis Load Combination = 213
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Pu-max from all Combinations = 115.79 kN
Pt required for Pu-max = 0 %
Pt min (User Defined) = 1 %
Minimum Pt required = 1 %

Resultant Moment (Combined Action)

Moment Capacity Check
Pt Calculated = 1.31
Reinforcement Provided = 8-D16
Load Angle = Tan-1(Muy/Mux)
= 1.25 deg
MRes = 11.99 kNm
( φ ) MCap = 66.41 kNm
Capacity Ratio = MRes/ MCap
= 0.181 < 1

Beam Capacity At Joint:

Beam Table For Shear Along B & Shear Along D
Level = 1.5 m
Analysis Reference Number = C11
Beams at Level: Top Joint
Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
300 x
90 0.01 5.52 355.89 452.4 32.38 10.62 355.89 452.4 32.41 0 32.38 0 32.41
350

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 9 of 34

300 x
0 0.38 6.16 355.89 452.4 32.38 12.93 355.89 452.4 32.41 32.38 0 32.41 0
350
300 x
180 0.49 6.21 355.89 452.4 32.38 12.92 355.89 452.4 32.41 32.38 0 32.41 0
350
300 x
270 0.07 7.43 355.89 452.4 32.38 11.1 355.89 452.4 32.41 0 32.38 0 32.41
350

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 32.38 32.38 32.38 32.38
Bottom 32.41 32.41 32.41 32.41

Shear Calculation
Along D Along B
(Analysis Forces)
Lu (mm) 1150 1150
Pu Top (kN) 110.44 110.44
Mnt (kNm) 83.46 83.46
Pu Bottom (kN) 115.79 115.79
Mnb (kNm) 84.08 84.08
Vu1 (kN) 145.69 145.69
Shear from Beam Capacity at Joint
Moment Mnt (kNm) MAX((left,Bot + Right,Top), (left,Top +
Right,Bot))
64.79 64.79
Moment Mnb (kNm) MAX((Left,Top + Right,Bot), (Right,Top +
Left,Bot))
0 0
Lu (mm) 1150 1150
Vu2 (kN) 56.34 56.34
Critical Analysis Load 215 221
Combination
Critical Load [23] : 1.38 (LOAD 9: [29] : 1.38 (LOAD 9:
Combination DL) +(LOAD 1: EQ + DL) +(LOAD 7: EQ - Z
X + E) +E)
Nu (kN) 73.66 82.67
Mu (kNm) 11.97 11.45
Vu3 (kN) 10.96 10.84
Vu' (kN) Minimum(Vu1, Vu2)
56.34 56.34
Design Shear, Vu (kN) Maximum(Vu', Vu3)
56.34 56.34
λ 1 1
φ 0.6 0.6
Deff (mm) 302 302
ρw (50% of As 0.008 0.008
provided)
Mm (kNm) 1.86 0.11
φVc (kN) 90.64 91.46
Check Vu < φVc Vu < φVc

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 10 of 34

Link For Shear Design Not Required Not Required

Design Of Links
Links in the zone where special confining links are not required
Normal Links

Maximum Longitudinal Diameter = Dia Of Rebar

Rebar Number of bundled bar, D1 = 16
Diameter of bundled bar, D1 = 16 mm
Bundled Rebar = No
Minimum diameter of link >= 9.5 mm
Provided Link Rebar Number = 10
Provided Diameter of link = 10 mm

Criterion for spacing of normal links

Min. Longitudinal Bar dia X 16 = 256 mm
48 x diameter of links = 480 mm
Min. Dimension of column = 350 mm

Spacing Criteria as per Vs & 0.33*Sqrt

(f'c)*Aeff
Along D
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 158.62 kN
Vs <=
Check 0.33*Sqrt (f'c)
*B*d
d/2 = 151 mm
600 = 600 mm

Along B
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 158.62 kN
Vs
Check <=0.33*Sqrt
(f'c)*B*d
b/2 = 151 mm
600 = 600 mm
Provided spacing = 175 mm

Criterion for spacing of Ductile links /

Links at Beam column Joint:
fyt = 276 N/sqmm
Along D
Av/s min-1 = 0.062 x Sqrt(f'c) x B x 1000 / fyt
= 357.54 sqmm/m

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 11 of 34

Av/s min-2 0.35 x B x 1000 / fyt

= 443.84 sqmm/m
Av/s min = Max ( Av/s min-1, Av/s min-2)
= 443.84 sqmm/m

Along B
Av/s min-1 = 0.062 x Sqrt(f'c) x D x 1000 / fyt
= 357.54 sqmm/m
Av/s min-2 0.35 x B x 1000 / fyt
= 443.84 sqmm/m
Av/s min = Max ( Av/s min-1, Av/s min-2)
= 443.84 sqmm/m
Criterion for spacing of Ductile links:
Min. Longitudinal Bar dia x 6 = 96 mm
B/4 = 87.5 mm
So = 150 mm
Max 150 mm = 150 mm
Provided Spacing = 75 mm

Special confining reinforcement as per

NSCP C101 - 2015
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Pu = 115.79 kN
Check for Ash
0.3 x Ag x f'c = 759.99 kN
Pu <= 0.3 x
Ag x f'c
f'c = 20.68 N/sqmm
f'c <= 70
Along D
No of bars along D = 3
S1 = 75 mm
Ag = 122500 sqmm
bc1 = 290 mm
Ach = 84100 sqmm
AshD1 = 223.23 sqmm
AshD2 = 146.67 sqmm
AshD (Max (AshD1, AshD2)) = 223.23 sqmm
AshD Provided = 235.62 sqmm
Along B
No of bars along B = 3
S1 = 75 mm
Ag = 122500 sqmm
dc1 = 290 mm
Ach = 84100 sqmm
AshB1 = 223.23 sqmm
AshB2 = 146.67 sqmm
AshB (Max (AshB1, AshB2)) = 223.23 sqmm

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 12 of 34

AshB Provided = 235.62 sqmm

Provided Links = #10@75 c/c

Numbers of legs provided along D = 3

Av/s provided along D = 3141.6 sqmm/m
Numbers of legs provided along B = 3
Av/s provided along B = 3141.6 sqmm/m
Hence, OK

Length of Confining Zone

Column maximum dimension = 350 mm
Clear height /6 = 191.7 mm
Min. 450 mm = 450 mm
Zone length = 450 mm

Table For Links

Note: Ductile Design of Links is Applicable Only For Boundary Elements
Required Provided
Normal Design Shear Design Ductile Design Normal Zone Ductile Zone
Link Rebar
10 --- 10 10 10
Number
Spacing 175 --- 75 175 75

General Data
Column No. : C11
Level : 1.5 m To 4.5 m
Frame Type = Lateral
Response Modification Coefficient = 3
Design Code = NSCP C101 - 2015
Grade Of Concrete (f'c) = C21 N/sqmm
Grade Of Steel (Main) = Fy276 N/sqmm
Grade Of Steel (Shear) = Fy276 N/sqmm
Grade Of Steel - Flexural Design = Fy276 N/sqmm
Grade Of Steel - Shear Design = Fy276 N/sqmm
Consider Ductile = Yes
Type of Frame = Special
Column B = 350 mm
Column D = 350 mm
Clear Cover, Cc = 40 mm
Clear Floor Height @ lux = 2600 mm
Clear Floor Height @ luy = 2600 mm
No Of Floors = 1
No Of Columns In Group = 1
Strength Reduction Factor φ (Shear) = 0.6

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 13 of 34

Flexural Design (Analysis Forces)

Analysis Reference No. = 70
Critical Analysis Load Combination : 103
[3] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD
Load Combination =
2: EQ + X -E)
Critical Location = Bottom Joint
Put = 104.83 kN
Muxt = -13.68 kNm
Muyt = -1.18 kNm
Vuxt = -0.47 kN
Vuyt = 9.09 kN
Pub = 97.19 kN
Muxb = 13.59 kNm
Muyb = 0.24 kNm
Vuxb = -0.47 kN
Vuyb = 9.09 kN

Effective Length Calculation

Calculation Along Major Axis Of Column
Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
3000 x 300 x 3000 x 300 x
Bottom 35.64 30.55 30.55 1.75
350 350
3000 x 250 x 3000 x 250 x
Top 35.64 38 38 0.871
400 400
User Defined Effective Length Factor = 1

Calculation Along Minor Axis Of Column

Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
2500 x 300 x 3000 x 300 x
Bottom 35.64 36.66 30.55 1.591
350 350
2500 x 250 x 3000 x 250 x
Top 35.64 45.6 38 0.695
400 400
User Defined Effective Length Factor = 1

Check For Stability Index

Along D
Q = 0.01
0.01< 0.05, Column shall be designed as non-sway frame (Braced)

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 14 of 34

Along B
Q = 0.01
0.01< 0.05, Column shall be designed as non-sway frame (Braced)

Slenderness Check
Column Is Braced Along D
Slenderness Check along D
k = 1
r = 101.04 mm
Kluy /r = 25.73
M1 = 13.59 kNm
M2 = -13.68 kNm
Min (40, 34 - 12 x (M1/M2)) = 40
25.73 < 40, Column not slender along D
Column Is Braced Along B
Slenderness Check along B
k = 1
r = 101.04 mm
Klux /r = 25.73
M1 = 0.24 kNm
M2 = -1.18 kNm
Min (40, 34 - 12 x (M1/M2)) = 36.45
25.73 < 36.45, Column not slender along B

Calculation of Design Moment

Direction Manalysis Msldr or Mc Mdesign-final
A B C
Major Axis Mux (top) -13.68 - -13.68
Major Axis Mux (bottom) 13.59 - 13.59
Minor Axis Muy (top) -1.18 - -1.18
Minor Axis Muy (bottom) 0.24 - 0.24

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = 97.19 kN
Mux = 13.59 kNm
Muy = 0.24 kNm

Φ Pn, Max Check

Critical Analysis Load Combination = 213

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 17 of 34

Left,Bot))
64.79 64.79
Lu (mm) 2600 2600
Vu2 (kN) 52.15 52.15
Critical Analysis Load 216 107
Combination
Critical Load [24] : 1.38 (LOAD 9: [7] : 1.2 (LOAD 9: DL)
Combination DL) +(LOAD 2: EQ + +0.5 (LOAD 10: LL) +
X -E) (LOAD 6: EQ + Z -E)
Nu (kN) 98.66 92.45
Mu (kNm) 13.61 12.6
Vu3 (kN) 9.11 -8.7
Vu' (kN) Minimum(Vu1, Vu2)
52.15 52.15
Design Shear, Vu (kN) Maximum(Vu', Vu3)
52.15 52.15
λ 1 1
φ 0.6 0.6
Deff (mm) 302 302
ρw (50% of As 0.008 0.008
provided)
Mm (kNm) 0.07 -0.09
φVc (kN) 92.89 92.34
Check Vu < φVc Vu < φVc
Link For Shear Design Not Required Not Required

Design Of Links
Links in the zone where special confining links are not required
Normal Links

Maximum Longitudinal Diameter = Dia Of Rebar

Rebar Number of bundled bar, D1 = 16
Diameter of bundled bar, D1 = 16 mm
Bundled Rebar = No
Minimum diameter of link >= 9.5 mm
Provided Link Rebar Number = 10
Provided Diameter of link = 10 mm

Criterion for spacing of normal links

Min. Longitudinal Bar dia X 16 = 256 mm
48 x diameter of links = 480 mm
Min. Dimension of column = 350 mm

Spacing Criteria as per Vs & 0.33*Sqrt

(f'c)*Aeff
Along D
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 158.62 kN

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 18 of 34

Vs <=
Check 0.33*Sqrt (f'c)
*B*d
d/2 = 151 mm
600 = 600 mm

Along B
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 158.62 kN
Vs
Check <=0.33*Sqrt
(f'c)*B*d
b/2 = 151 mm
600 = 600 mm
Provided spacing = 175 mm

Special confining reinforcement as per

NSCP C101 - 2015
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Pu = 149.43 kN
Check for Ash
0.3 x Ag x f'c = 759.99 kN
Pu <= 0.3 x

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 19 of 34

Ag x f'c
f'c = 20.68 N/sqmm
f'c <= 70
Along D
No of bars along D = 3
S1 = 75 mm
Ag = 122500 sqmm
bc1 = 290 mm
Ach = 84100 sqmm
AshD1 = 223.23 sqmm
AshD2 = 146.67 sqmm
AshD (Max (AshD1, AshD2)) = 223.23 sqmm
AshD Provided = 235.62 sqmm
Along B
No of bars along B = 3
S1 = 75 mm
Ag = 122500 sqmm
dc1 = 290 mm
Ach = 84100 sqmm
AshB1 = 223.23 sqmm
AshB2 = 146.67 sqmm
AshB (Max (AshB1, AshB2)) = 223.23 sqmm
AshB Provided = 235.62 sqmm
Provided Links = #10@75 c/c

Numbers of legs provided along D = 3

Av/s provided along D = 3141.6 sqmm/m
Numbers of legs provided along B = 3
Av/s provided along B = 3141.6 sqmm/m
Hence, OK

Length of Confining Zone

Column maximum dimension = 350 mm
Clear height /6 = 433.3 mm
Min. 450 mm = 450 mm
Zone length = 450 mm

Table For Links

General Data

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 16 of 34

250 x
0 0.05 32.71 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0
400
250 x
180 0.19 32.73 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0
400
250 x
270 0 22.42 373.71 565.5 43.86 2.18 326.24 339.3 26.93 0 43.86 0 26.93
400

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 43.86 43.86 43.86 43.86
Bottom 26.93 26.93 26.93 26.93

Beams at Level: Bottom Joint

Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
300 x
90 0.01 5.52 355.89 452.4 32.38 10.62 355.89 452.4 32.41 0 32.38 0 32.41
350
300 x
0 0.38 6.16 355.89 452.4 32.38 12.93 355.89 452.4 32.41 32.38 0 32.41 0
350
300 x
180 0.49 6.21 355.89 452.4 32.38 12.92 355.89 452.4 32.41 32.38 0 32.41 0
350
300 x
270 0.07 7.43 355.89 452.4 32.38 11.1 355.89 452.4 32.41 0 32.38 0 32.41
350

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 32.38 32.38 32.38 32.38
Bottom 32.41 32.41 32.41 32.41

Shear Calculation
Along D Along B
(Analysis Forces)
Lu (mm) 2600 2600
Pu Top (kN) 138.74 138.74
Mnt (kNm) 86.71 86.71
Pu Bottom (kN) 149.43 149.43
Mnb (kNm) 87.94 87.94
Vu1 (kN) 67.17 67.17
Shear from Beam Capacity at Joint
Moment Mnt (kNm) MAX((left,Bot + Right,Top), (left,Top +
Right,Bot))
70.79 70.79
Moment Mnb (kNm) MAX((Left,Top + Right,Bot), (Right,Top +

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 20 of 34

Column No. : C11

Level : 4.5 m To 7.5 m
Frame Type = Lateral
Response Modification Coefficient = 3
Design Code = NSCP C101 - 2015
Grade Of Concrete (f'c) = C21 N/sqmm
Grade Of Steel (Main) = Fy276 N/sqmm
Grade Of Steel (Shear) = Fy276 N/sqmm
Grade Of Steel - Flexural Design = Fy276 N/sqmm
Grade Of Steel - Shear Design = Fy276 N/sqmm
Consider Ductile = Yes
Type of Frame = Special
Column B = 300 mm
Column D = 350 mm
Clear Cover, Cc = 40 mm
Clear Floor Height @ lux = 2600 mm
Clear Floor Height @ luy = 2600 mm
No Of Floors = 1
No Of Columns In Group = 1
Strength Reduction Factor φ (Shear) = 0.6

Flexural Design (Analysis Forces)

Analysis Reference No. = 109
Critical Analysis Load Combination : 212
[20] : 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +
Load Combination =
(LOAD 6: EQ + Z -E)
Critical Location = Top Joint
Put = 23.54 kN
Muxt = 0.17 kNm
Muyt = -12.85 kNm
Vuxt = -8.05 kN
Vuyt = -0.12 kN
Pub = 12.84 kN
Muxb = -0.19 kNm
Muyb = 11.28 kNm
Vuxb = -8.05 kN
Vuyb = -0.12 kN

Effective Length Calculation

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 22 of 34

Direction Manalysis Msldr or Mc Mdesign-final

A B C
Major Axis Mux (top) 0.17 - 0.17
Major Axis Mux (bottom) -0.19 - -0.19
Minor Axis Muy (top) -12.85 - -12.85
Minor Axis Muy (bottom) 11.28 - 11.28

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = 23.54 kN
Mux = 0.17 kNm
Muy = -12.85 kNm

Φ Pn, Max Check

Critical Analysis Load Combination = 213
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Critical Location = Top Joint
Pu = 30.57 kN
Mux = 0.15 kNm
Muy = 7.07 kNm
Pt Calculated = 1.53
φ Pn, Max = 1175.91 kN
Pu < φ Pn, Max Hence, OK

Minimum Ast Calculation

Critical Analysis Load Combination = 213
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Pu-max from all Combinations = 30.57 kN
Pt required for Pu-max = 0 %
Pt min (User Defined) = 1 %
Minimum Pt required = 1 %

Resultant Moment (Combined Action)

Moment Capacity Check
Pt Calculated = 1.53
Reinforcement Provided = 8-D16
Load Angle = Tan-1(Muy/Mux)

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 22 of 34

Direction Manalysis Msldr or Mc Mdesign-final

A B C
Major Axis Mux (top) 0.17 - 0.17
Major Axis Mux (bottom) -0.19 - -0.19
Minor Axis Muy (top) -12.85 - -12.85
Minor Axis Muy (bottom) 11.28 - 11.28

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = 23.54 kN
Mux = 0.17 kNm
Muy = -12.85 kNm

Φ Pn, Max Check

Minimum Ast Calculation

Resultant Moment (Combined Action)

Moment Capacity Check
Pt Calculated = 1.53
Reinforcement Provided = 8-D16
Load Angle = Tan-1(Muy/Mux)

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 23 of 34

= 89.23 deg
MRes = 12.86 kNm
( φ ) MCap = 49.47 kNm
Capacity Ratio = MRes/ MCap
= 0.26 < 1

Beam Capacity At Joint:

Beam Table For Shear Along B & Shear Along D
Level = 7.5 m
Analysis Reference Number = C11
Beams at Level: Top Joint
Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
250 x
90 0.01 1.38 326.24 339.3 26.92 9.05 326.24 339.3 26.93 0 26.92 0 26.93
400
250 x
0 0.2 14.3 326.24 339.3 26.92 2.51 326.24 339.3 26.93 26.92 0 26.93 0
400
250 x
180 0.92 14.71 326.24 339.3 26.92 2.73 326.24 339.3 26.93 26.92 0 26.93 0
400
250 x
270 0.2 0.47 326.24 339.3 26.92 15.99 326.24 339.3 26.93 0 26.92 0 26.93
400

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 26.92 26.92 26.92 26.92
Bottom 26.93 26.93 26.93 26.93

Beams at Level: Bottom Joint

Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
250 x
90 0.02 26.07 418.48 565.5 43.86 0 326.24 339.3 26.93 0 43.86 0 26.93
400
250 x
0 0.05 32.71 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0
400

250 x 180 0.19 32.73 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 23 of 34

= 89.23 deg
MRes = 12.86 kNm
( φ ) MCap = 49.47 kNm
Capacity Ratio = MRes/ MCap
= 0.26 < 1

Beam Capacity At Joint:

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 26.92 26.92 26.92 26.92
Bottom 26.93 26.93 26.93 26.93

Beams at Level: Bottom Joint

Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
250 x
90 0.02 26.07 418.48 565.5 43.86 0 326.24 339.3 26.93 0 43.86 0 26.93
400
250 x
0 0.05 32.71 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0
400

250 x 180 0.19 32.73 418.48 565.5 43.86 0 326.24 339.3 26.93 43.86 0 26.93 0

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 24 of 34

400
250 x
270 0 22.42 373.71 565.5 43.86 2.18 326.24 339.3 26.93 0 43.86 0 26.93
400

Effective Moment for Column

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)
Left Right Left Right
Top 43.86 43.86 43.86 43.86
Bottom 26.93 26.93 26.93 26.93

Shear Calculation
Along D Along B
(Analysis Forces)
Lu (mm) 2600 2600
Pu Top (kN) 19.88 19.88
Mnt (kNm) 71.2 59.34
Pu Bottom (kN) 30.57 30.57
Mnb (kNm) 72.53 60.37
Vu1 (kN) 55.28 46.04
Shear from Beam Capacity at Joint
Moment Mnt (kNm) MAX((left,Bot + Right,Top), (left,Top +
Right,Bot))
53.85 53.85
Moment Mnb (kNm) MAX((Left,Top + Right,Bot), (Right,Top +
Left,Bot))
70.79 70.79
Lu (mm) 2600 2600
Vu2 (kN) 47.94 47.94
Critical Analysis Load 104 212
Combination
Critical Load [4] : 1.2 (LOAD 9: DL) [20] : 1.68 (LOAD 9:
Combination +0.5 (LOAD 10: LL) + DL) +0.5 (LOAD 10:
(LOAD 3: EQ - X +E) LL) +(LOAD 6: EQ + Z
-E)
Nu (kN) 20.33 23.54
Mu (kNm) 10.85 12.85
Vu3 (kN) -6.76 -8.05
Vu' (kN) Minimum(Vu1, Vu2)
47.94 46.04
Design Shear, Vu (kN) Maximum(Vu', Vu3)
47.94 46.04
λ 1 1
φ 0.6 0.6
Deff (mm) 302 252
ρw (50% of As 0.009 0.009
provided)
Mm (kNm) 8.06 10.07
φVc (kN) 54.29 47.96
Check Vu < φVc Vu < φVc
Link For Shear Design Not Required Not Required

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 25 of 34

Design Of Links
Links in the zone where special confining links are not required
Normal Links

Maximum Longitudinal Diameter = Dia Of Rebar

Rebar Number of bundled bar, D1 = 16
Diameter of bundled bar, D1 = 16 mm
Bundled Rebar = No
Minimum diameter of link >= 9.5 mm
Provided Link Rebar Number = 10
Provided Diameter of link = 10 mm

Criterion for spacing of normal links

Min. Longitudinal Bar dia X 16 = 256 mm
48 x diameter of links = 480 mm
Min. Dimension of column = 300 mm

Spacing Criteria as per Vs & 0.33*Sqrt

(f'c)*Aeff
Along D
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 135.96 kN
Vs <=
Check 0.33*Sqrt (f'c)
*B*d
d/2 = 151 mm
600 = 600 mm

Along B
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 132.36 kN
Vs
Check <=0.33*Sqrt
(f'c)*B*d
b/2 = 126 mm
600 = 600 mm
Provided spacing = 150 mm

Criterion for spacing of Ductile links /

Links at Beam column Joint:
fyt = 276 N/sqmm
Along D
Av/s min-1 = 0.062 x Sqrt(f'c) x B x 1000 / fyt
= 306.46 sqmm/m
Av/s min-2 0.35 x B x 1000 / fyt
= 380.43 sqmm/m

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 26 of 34

Av/s min = Max ( Av/s min-1, Av/s min-2)

= 380.43 sqmm/m

Along B
Av/s min-1 = 0.062 x Sqrt(f'c) x D x 1000 / fyt
= 357.54 sqmm/m
Av/s min-2 0.35 x B x 1000 / fyt
= 443.84 sqmm/m
Av/s min = Max ( Av/s min-1, Av/s min-2)
= 443.84 sqmm/m
Criterion for spacing of Ductile links:
Min. Longitudinal Bar dia x 6 = 96 mm
B/4 = 75 mm
So = 150 mm
Max 150 mm = 150 mm
Provided Spacing = 75 mm

Special confining reinforcement as per

NSCP C101 - 2015
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 7: EQ - Z +E)
Pu = 30.57 kN
Check for Ash
0.3 x Ag x f'c = 651.42 kN
Pu <= 0.3 x
Ag x f'c
f'c = 20.68 N/sqmm
f'c <= 70
Along D
No of bars along D = 3
S1 = 75 mm
Ag = 105000 sqmm
bc1 = 244 mm
Ach = 71736 sqmm
AshD1 = 190.74 sqmm
AshD2 = 123.41 sqmm
AshD (Max (AshD1, AshD2)) = 190.74 sqmm
AshD Provided = 339.29 sqmm
Along B
No of bars along B = 3
S1 = 75 mm
Ag = 105000 sqmm
dc1 = 294 mm
Ach = 71736 sqmm
AshB1 = 229.83 sqmm
AshB2 = 148.69 sqmm
AshB (Max (AshB1, AshB2)) = 229.83 sqmm
AshB Provided = 339.29 sqmm

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 28 of 34

Analysis Reference No. = 154

Critical Analysis Load Combination : 213
[21] : 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +
Load Combination =
(LOAD 7: EQ - Z +E)
Critical Location = Top Joint
Put = 25.22 kN
Muxt = 0.01 kNm
Muyt = 3.6 kNm
Vuxt = -2.99 kN
Vuyt = 0.02 kN
Pub = 19.68 kN
Muxb = -0.03 kNm
Muyb = -1.18 kNm
Vuxb = -2.99 kN
Vuyb = 0.02 kN

Effective Length Calculation

Calculation Along Major Axis Of Column
Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
Bottom 381.83 No Beam No Beam - - 5.426
Top 381.83 No Beam No Beam - - 1
User Defined Effective Length Factor = 1

Calculation Along Minor Axis Of Column

Joint Column Beam Sizes Beam Stiffness ψ
Stiffness Beam 1 Beam 2 Beam 1 Beam 2
(Length x (Length x
Width x Depth) Width x Depth)
N-m x 10^6 mm mm N-m x 10^6 N-m x 10^6
Bottom 194.81 No Beam No Beam - - 2.599
Top 194.81 No Beam No Beam - - 1
User Defined Effective Length Factor = 1

Check For Stability Index

Along D
Q = 0.046
0.046< 0.05, Column shall be designed as non-sway frame (Braced)

Along B
Q = 0.02
0.02< 0.05, Column shall be designed as non-sway frame (Braced)

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 29 of 34

Slenderness Check
Column Is Braced Along D
Slenderness Check along D
k = 1
r = 101.04 mm
Kluy /r = 15.84
M1 = 0.01 kNm
M2 = -0.03 kNm
Min (40, 34 - 12 x (M1/M2)) = 38.34
15.84 < 38.34, Column not slender along D
Column Is Braced Along B
Slenderness Check along B
k = 1
r = 72.17 mm
Klux /r = 22.17
M1 = -1.18 kNm
M2 = 3.6 kNm
Min (40, 34 - 12 x (M1/M2)) = 37.95
22.17 < 37.95, Column not slender along B

Calculation of Design Moment

Direction Manalysis Msldr or Mc Mdesign-final
A B C
Major Axis Mux (top) 0.01 - 0.01
Major Axis Mux (bottom) -0.03 - -0.03
Minor Axis Muy (top) 3.6 - 3.6
Minor Axis Muy (bottom) -1.18 - -1.18

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = 25.22 kN
Mux = 0.01 kNm
Muy = 3.6 kNm

Φ Pn, Max Check

Critical Analysis Load Combination = 212
[20] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 6: EQ + Z -E)
Critical Location = Top Joint
Pu = 28.14 kN

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 30 of 34

Mux = 0 kNm
Muy = -0.98 kNm
Pt Calculated = 1.38
φ Pn, Max = 961.91 kN
Pu < φ Pn, Max Hence, OK

Minimum Ast Calculation

Critical Analysis Load Combination = 212
[20] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 6: EQ + Z -E)
Pu-max from all Combinations = 28.14 kN
Pt required for Pu-max = 0 %
Pt min (User Defined) = 1 %
Minimum Pt required = 1 %

Resultant Moment (Combined Action)

Moment Capacity Check
Pt Calculated = 1.38
Reinforcement Provided = 6-D16
Load Angle = Tan-1(Muy/Mux)
= 89.85 deg
MRes = 3.6 kNm
( φ ) MCap = 30.98 kNm
Capacity Ratio = MRes/ MCap
= 0.116 < 1

Beams at Level: Bottom Joint

Beam Beam Torsion Moment Capacity Beam at Moment Capacity Beam at Resultant Moment
Size angle moment Top Bottom
w.r.t.
column
Ly
Ast req Ast pro Mu Ast req Ast pro Mu Top Top Bot @ Bot @
Mu Mu
cap cap @ D @ B D B
(mm) (deg) (kNm) (kNm) (kNm)
(sqmm) (sqmm) (kNm) (sqmm) (sqmm) (kNm) (kNm) (kNm) (kNm) (kNm)
250 x
90 0.01 1.38 326.24 339.3 26.92 9.05 326.24 339.3 26.93 0 26.92 0 26.93
400
250 x
0 0.2 14.3 326.24 339.3 26.92 2.51 326.24 339.3 26.93 26.92 0 26.93 0
400
250 x
180 0.92 14.71 326.24 339.3 26.92 2.73 326.24 339.3 26.93 26.92 0 26.93 0
400
250 x
270 0.2 0.47 326.24 339.3 26.92 15.99 326.24 339.3 26.93 0 26.92 0 26.93
400

Effective Moment for Column

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 31 of 34

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)

Left Right Left Right
Top 26.92 26.92 26.92 26.92
Bottom 26.93 26.93 26.93 26.93

Shear Calculation
Along D Along B
(Analysis Forces)
Lu (mm) 1600 1600
Pu Top (kN) 22.6 22.6
Mnt (kNm) 54.79 36.7
Pu Bottom (kN) 28.14 28.14
Mnb (kNm) 55.48 37.15
Vu1 (kN) 68.92 46.15
Shear from Beam Capacity at Joint
Moment Mnt (kNm) MAX((left,Bot + Right,Top), (left,Top +
Right,Bot))
0 0
Moment Mnb (kNm) MAX((Left,Top + Right,Bot), (Right,Top +
Left,Bot))
53.85 53.85
Lu (mm) 1600 1600
Vu2 (kN) 33.66 33.66
Critical Analysis Load 103 213
Combination
Critical Load [3] : 1.2 (LOAD 9: DL) [21] : 1.68 (LOAD 9:
Combination +0.5 (LOAD 10: LL) + DL) +0.5 (LOAD 10:
(LOAD 2: EQ + X -E) LL) +(LOAD 7: EQ - Z
+E)
Nu (kN) 15.11 19.68
Mu (kNm) 4.92 1.18
Vu3 (kN) 3.15 -2.99
Vu' (kN) Minimum(Vu1, Vu2)
33.66 33.66
Design Shear, Vu (kN) Maximum(Vu', Vu3)
33.66 33.66
λ 1 1
φ 0.6 0.6
Deff (mm) 302 202
ρw (50% of As 0.008 0.009
provided)
Mm (kNm) 2.85 -0.78
φVc (kN) 54.93 57.74
Check Vu < φVc Vu < φVc
Link For Shear Design Not Required Not Required

Design Of Links
Links in the zone where special confining links are not required
Normal Links

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 31 of 34

Mu Major (Along D) (kNm) Mu Minor (Along B) (kNm)

Left Right Left Right
Top 26.92 26.92 26.92 26.92
Bottom 26.93 26.93 26.93 26.93

Design Of Links
Links in the zone where special confining links are not required
Normal Links

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 33 of 34

= 357.54 sqmm/m
Av/s min-2 0.35 x B x 1000 / fyt
= 443.84 sqmm/m
Av/s min = Max ( Av/s min-1, Av/s min-2)
= 443.84 sqmm/m
Criterion for spacing of Ductile links:
Min. Longitudinal Bar dia x 6 = 96 mm
B/4 = 62.5 mm
So = 150 mm
Max 150 mm = 150 mm
Provided Spacing = 50 mm

Special confining reinforcement as per

NSCP C101 - 2015
[20] : 1.68 (LOAD 9: DL) +0.5 (LOAD
Load Combination =
10: LL) +(LOAD 6: EQ + Z -E)
Pu = 28.14 kN
Check for Ash
0.3 x Ag x f'c = 542.85 kN
Pu <= 0.3 x
Ag x f'c
f'c = 20.68 N/sqmm
f'c <= 70
Along D
No of bars along D = 2
S1 = 50 mm
Ag = 87500 sqmm
bc1 = 190 mm
Ach = 55100 sqmm
AshD1 = 125.57 sqmm
AshD2 = 64.06 sqmm
AshD (Max (AshD1, AshD2)) = 125.57 sqmm
AshD Provided = 157.08 sqmm
Along B
No of bars along B = 3
S1 = 50 mm
Ag = 87500 sqmm
dc1 = 290 mm
Ach = 55100 sqmm
AshB1 = 191.66 sqmm
AshB2 = 97.78 sqmm
AshB (Max (AshB1, AshB2)) = 191.66 sqmm
AshB Provided = 235.62 sqmm
Provided Links = #10@50 c/c

Numbers of legs provided along D = 2

Av/s provided along D = 3141.6 sqmm/m
Numbers of legs provided along B = 3

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Design Calculations Page 34 of 34

Av/s provided along B = 4712.4 sqmm/m

Hence, OK

Length of Confining Zone

Column maximum dimension = 350 mm
Clear height /6 = 266.7 mm
Min. 450 mm = 450 mm
Zone length = 450 mm

Table For Links

file:///C:/Users/user/AppData/Local/Temp/tmpC531.tmp 2/7/2024
Column Design: Column Design Summary Page 1 of 9

COLUMN DESIGN SUMMARY

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-oﬀ_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Column-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modiﬁed : 2/7/2024 6:11:52 PM

Design Code: NSCP C101 - 2015

Load Combinations :
L/C Analysis
Load Deﬁnition
No No
1 101 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
2 102 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 1: EQ + X + E)
3 103 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 2: EQ + X -E)
4 104 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 3: EQ - X +E)
5 105 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 4: EQ - X -E)
6 106 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 5: EQ + Z +E)
7 107 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 6: EQ + Z -E)
8 108 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 7: EQ - Z +E)
9 109 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 8: EQ - Z -E)
10 201 1.4 (LOAD 9: DL)
11 202 1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL)
12 204 1.2 (LOAD 9: DL)
15 207 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 1: EQ + X + E)
16 208 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 2: EQ + X -E)
17 209 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 3: EQ - X +E)
18 210 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 4: EQ - X -E)
19 211 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 5: EQ + Z +E)
20 212 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 6: EQ + Z -E)
21 213 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 7: EQ - Z +E)
22 214 1.68 (LOAD 9: DL) +0.5 (LOAD 10: LL) +(LOAD 8: EQ - Z -E)
23 215 1.38 (LOAD 9: DL) +(LOAD 1: EQ + X + E)
24 216 1.38 (LOAD 9: DL) +(LOAD 2: EQ + X -E)
25 217 1.38 (LOAD 9: DL) +(LOAD 3: EQ - X +E)
26 218 1.38 (LOAD 9: DL) +(LOAD 4: EQ - X -E)
27 219 1.38 (LOAD 9: DL) +(LOAD 5: EQ + Z +E)
28 220 1.38 (LOAD 9: DL) +(LOAD 6: EQ + Z -E)
29 221 1.38 (LOAD 9: DL) +(LOAD 7: EQ - Z +E)
30 222 1.38 (LOAD 9: DL) +(LOAD 8: EQ - Z -E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 1: EQ + X
39
+ E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 2: EQ + X -
40
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 3: EQ - X
41
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 4: EQ - X -

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 2 of 9

42 E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 5: EQ + Z
43
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 6: EQ + Z -
44
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 7: EQ - Z
45
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) +3 x Drift- (LOAD 8: EQ - Z -
46
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 1: EQ + X +
47
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 2: EQ + X -
48
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 3: EQ - X
49
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 4: EQ - X -
50
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 5: EQ + Z
51
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 6: EQ + Z -
52
E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 7: EQ - Z
53
+E)
1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL) -3 x Drift- (LOAD 8: EQ - Z -
54
E)
55 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 1: EQ + X + E)
56 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 2: EQ + X -E)
57 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 3: EQ - X +E)
58 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 4: EQ - X -E)
59 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 5: EQ + Z +E)
60 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 6: EQ + Z -E)
61 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 7: EQ - Z +E)
62 1.4 (LOAD 9: DL) +3 x Drift- (LOAD 8: EQ - Z -E)
63 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 1: EQ + X + E)
64 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 2: EQ + X -E)
65 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 3: EQ - X +E)
66 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 4: EQ - X -E)
67 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 5: EQ + Z +E)
68 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 6: EQ + Z -E)
69 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 7: EQ - Z +E)
70 1.4 (LOAD 9: DL) -3 x Drift- (LOAD 8: EQ - Z -E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 1: EQ + X
71
+ E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 2: EQ + X -
72
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 3: EQ - X
73
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 4: EQ - X -
74
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 5: EQ + Z
75
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 6: EQ + Z -

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 3 of 9

76 E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 7: EQ - Z
77
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) +3 x Drift- (LOAD 8: EQ - Z -
78
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 1: EQ + X +
79
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 2: EQ + X -
80
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 3: EQ - X
81
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 4: EQ - X -
82
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 5: EQ + Z
83
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 6: EQ + Z -
84
E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 7: EQ - Z
85
+E)
1.2 (LOAD 9: DL) +1.6 (LOAD 10: LL) -3 x Drift- (LOAD 8: EQ - Z -
86
E)
87 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 1: EQ + X + E)
88 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 2: EQ + X -E)
89 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 3: EQ - X +E)
90 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 4: EQ - X -E)
91 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 5: EQ + Z +E)
92 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 6: EQ + Z -E)
93 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 7: EQ - Z +E)
94 1.2 (LOAD 9: DL) +3 x Drift- (LOAD 8: EQ - Z -E)
95 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 1: EQ + X + E)
96 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 2: EQ + X -E)
97 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 3: EQ - X +E)
98 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 4: EQ - X -E)
99 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 5: EQ + Z +E)
100 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 6: EQ + Z -E)
101 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 7: EQ - Z +E)
102 1.2 (LOAD 9: DL) -3 x Drift- (LOAD 8: EQ - Z -E)

Levels : 1. FOUNDATION
2. 1.5 m
3. 4.5 m
4. 7.5 m
5. 8.7 m
6. 8.9 m
7. 9.1 m
8. 9.9 m

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 4 of 9

Column/Wall : C16
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 16 208 -5.98 15.02 -0.93 1.31 0.27 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 17 209 60.56 17.2 3.18 1.31 0.27 8-D16
350 D10 @ 175
Fy276
C21 :
250 X 6- D16 D10 @ 50 +
4 TO 5 Fy276 : 20 212 24.85 0.05 -4.29 1.9 0.11
350 D10 @ 125
Fy276

Column/Wall : C17
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 24 216 27.4 16.47 1.31 1.31 0.27 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 3 103 55.3 -20.14 4.89 2.05 0.23 8-D20
350 D10 @ 175
Fy276
C21 :
250 X D10 @ 50 +
4 TO 5 Fy276 : 20 212 25.58 0 -3.34 2.15 0.08 6-D20
350 D10 @ 125
Fy276

Column/Wall : C18
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 17 209 -4.2 -13.76-0.17 1.31 0.24 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 16 208 61.33 -18.562.12 1.31 0.29 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 15 207 8.27 8.71 -4.55 1.53 0.17 8-D16
350 D10 @ 150
Fy276
C21 :
250 X D10 @ 50 +
4 TO 5 Fy276 : 20 212 25.37-0.07 -3.56 1.38 0.11 6-D16
350 D10 @ 125
Fy276

Column/Wall : C13
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 6 of 9

350 Fy276 D10 @ 125

Column/Wall : C11
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 24 216 73.7 11.99 -0.26 1.31 0.18 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 3 103 97.19 13.59 0.24 1.31 0.2 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 20 212 23.54 0.17 -12.85 1.53 0.26 8-D16
350 D10 @ 150
Fy276
C21 :
250 X D10 @ 50 +
6 TO 7 Fy276 : 21 213 25.22 0.01 3.6 1.38 0.12 6-D16
350 D10 @ 125
Fy276

Column/Wall : C12
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 25 217 22.96 -11.2 -2.17 1.31 0.19 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 16 208 106.53 -14.99
-4.31 1.31 0.22 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 20 212 16.67 7.1 8.31 1.53 0.2 8-D16
350 D10 @ 150
Fy276
C21 :
250 X D10 @ 50 +
6 TO 7 Fy276 : 16 208 21.14 -5.53 -1.22 1.38 0.13 6-D16
350 D10 @ 125
Fy276

Column/Wall : C5
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 20 212 30.91 1.56 11.65 1.31 0.19 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 21 213 45.55 6.78 13.95 1.31 0.24 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 20 212 11.59 0.2 -9.46 1.53 0.2 8-D16
350 D10 @ 150
Fy276

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 8 of 9

Column/Wall : C1
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X - D10 @ 75 +
1 TO 2 Fy276 : 21 213 0.3 -10.74 1.31 0.2 8-D16
350 26.45 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 28 220 -0.69 0.66 8.19 3.08 0.82 8-D16
350 D10 @ 175
Fy276

Column/Wall : C2
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X - D10 @ 75 +
1 TO 2 Fy276 : 21 213 -0.06 -10.88 1.31 0.2 8-D16
350 24.37 D10 @ 150
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 20 212 34.9 0.89 -16.81 1.68 0.22 8-D16
350 D10 @ 175
Fy276

Column/Wall : C3
FrameType : Gravity
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X
2 TO 3 Fy276 : 15 207 9.41 -8.92 -0.96 1.31 0.15 8-D16 D10 @ 75
350
Fy276

Column/Wall : C8
FrameType : Gravity
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
250 X
7 TO 8 Fy276 : 20 212 -17 -0.8 4.78 1.38 0.17 6-D16 D10 @ 75
350
Fy276

Column/Wall : C9
FrameType : Gravity
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
250 X -
7 TO 8 Fy276 : 20 212 -1.16 3.63 1.38 0.12 6-D16 D10 @ 75
350 19.66
Fy276

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 9 of 9

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 5 of 9

C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 24 216 1.02 12.93 -2.71 1.31 0.23 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 17 209 86.82 16.88-1.94 2.05 0.18
350 8-D16 D10 @ 175
Fy276

Column/Wall : C14
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 24 216 54.28 14.2 -0.09 1.31 0.22 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 24 216 81.03 16.58-0.19 1.31 0.25 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 17 209 -9.75 12.74 -0.28 1.53 0.23 8-D16
350 D10 @ 125
Fy276
C21 :
250 X D10 @ 50 +
5 TO 6 Fy276 : 21 213 22.18 0 4.74 1.38 0.15 6-D16
350 D10 @ 125
Fy276

Column/Wall : C15
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 17 209 13.21 -12.72-2.09 1.31 0.22 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 16 208 86.85 -17.56-3.42 2.05 0.19 8-D16
350 D10 @ 175
Fy276

Column/Wall : C10
FrameType : Lateral
Level Size Material LC Analysis P Mx My Pt Interaction Main Links
(mm) LC No (kN) (kNm)(kNm)(%) Ratio Reinforcement
C21 :
350 X D10 @ 75 +
1 TO 2 Fy276 : 24 216 32.68 11.1 -2.84 1.31 0.18 8-D16
350 D10 @ 175
Fy276
C21 :
350 X D10 @ 75 +
2 TO 3 Fy276 : 17 209 114.86 14.99-3.24 1.31 0.21 8-D16
350 D10 @ 175
Fy276
C21 :
300 X D12 @ 75 +
3 TO 4 Fy276 : 20 212 30.24 -7.48 7.68 1.53 0.19 8-D16
350 D10 @ 150
Fy276
C21 :
6 TO 7 17 209 21.07 5.48 -3.06 1.38 0.14 6-D16
250 X Fy276 : D10 @ 50 +

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
Column Design: Column Design Summary Page 6 of 9

350 Fy276 D10 @ 125

ﬁle:///C:/Users/user/AppData/Local/Temp/tmpA69C.tmp 2/7/2024
2024

SLAB ANALYSIS AND DESIGN

PART 2.D

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO
Slab Design: Project Settings Page 1 of 1

Design Settings
Detailing Style : Curtailed Bars
Preferred Span / D
Cantilever : 8
Simply Supported (One-way Slab) : 24
Continuous (One-way Slab) : 30
Simply Supported (Two-way Slab) : 32
Continuous (Two-way Slab) : 38
Curtailment Location
Bottom End Support : L/6
Bottom Cont. Support : L/6
Top End Support : L/4
Top Cont. Support : L/4
Detailing Option : Rebar
Preferred Rebar : 12
Material Property
Analysis materials used : No
Concrete Grade : C21
Steel Grade : Fy227
Cover : 12 mm
Min. Slab Thickness : 100 mm
Rebars
Available Rebars : 10,12,16,20,25,32,40
Bar Spacing
Min. Spacing : 100 mm
Max. Spacing : 300 mm
Roundoff Factor : 5 mm
Crack Width Settings:
Crack Width ACI 224R-01 Check : No

file:///C:/Users/user/AppData/Local/Temp/tmp1A45.tmp 2/8/2024
Slab Design :Design Summary Page 1 of 3

SLAB DESIGN SUMMARY

Panel Types:
One Way Slab: 1. Simply Supported
2. End Span
3. Span Next to End Span
4. Interior Span

Two Way Slab: 1. Interior Panel

2. One Short Edge Discontinuous
3. One Long Edge Discontinuous
4. Two Adjacent Edges Discontinuous
5. Two Short Edges Discontinuous
6. Two Long Edges Discontinuous
7. Three Edges Discontinuous (One Long Edge Continuous)
8. Three Edges Discontinuous (One Short Edge Continuous)
9. Four Edges Discontinuous
10.Simply Supported On Four Sides

Level: 7.5 m

Slab No. : S1
Ly = 3 m Lx = 3 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 2-Way Panel Type = 4
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 300

Slab No. : S2
Ly = 3 m Lx = 3 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 2-Way Panel Type = 4
Grade of Concrete = C21 Grade of Steel = Fy227
Design Code = NSCP

file:///C:/Users/user/AppData/Local/Temp/tmp29D7.tmp 2/8/2024
Slab Design :Design Summary Page 2 of 3

C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 300

Slab No. : S3
Ly = 3 m Lx = 3 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 2-Way Panel Type = 3
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 300

Slab No. : S4
Ly = 3 m Lx = 3 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 2-Way Panel Type = 3
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 300

Slab No. : S5
Ly = 3 m Lx = 1.25 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 1-Way Panel Type = 3
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 --- D12 @ 300

Slab No. : S6
Ly = 3 m Lx = 2.5 m

file:///C:/Users/user/AppData/Local/Temp/tmp29D7.tmp 2/8/2024
Slab Design :Design Summary Page 3 of 3

Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm

Thickness = 125 mm Span Type = 2-Way Panel Type = 4
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 250 D12 @ 300

Slab No. : S8
Ly = 3 m Lx = 1.5 m
Live Load = 1.9 kN/sqm Imposed Load = 1 kN/sqm
Thickness = 125 mm Span Type = 2-Way Panel Type = 8
Design Code = NSCP
Grade of Concrete = C21 Grade of Steel = Fy227
C101 - 2015

Bottom SS Bottom LS Top SS Top LS Distribution

D12 @ 250 D12 @ 250 --- D12 @ 250 D12 @ 300

file:///C:/Users/user/AppData/Local/Temp/tmp29D7.tmp 2/8/2024
Page 1 of 5

SLAB DESIGN CALCULATIONS

NOTES:
1. Density of concrete assumed as 25 kN/cum.

Definitions Of Terms: :
Ratio of flexural stiffness of beam section to flexural
1. αf =
stiffness of slab.
Ratio of torsional stiffness of edge beam section to flexural
2. βt =
stiffness of slab.
3. Φt = Strength reduction factor.
4. As = Area of Tension reinforcement required in 'sqmm'.
5. As,min = Min area of flexural reinforcement in 'sqmm'.
Area of longitudinal reinforcement provided at given section
6. AstPrv =
in 'sqmm'.
Total area of longitudinal reinforcement calculated at a
7. Ast =
given section in 'sqmm'.
8. b = Width of the Slab in 'mm'.
9. B1 to B4 = Width of beams around slab in 'mm'.
10. Cc = Effective Cover to tension reinforcement in 'mm'.
cross-sectional constant to define torsional properties of slab
11. CA and CB =
and beam.
12. deff = Effective depth of slab in 'mm'.
13. D1 to D4 = Depth of beams around slab.
14. Icr = Moment of Inertia of concrete crack section.
Length of clear span in direction that moment are being
15. Ln =
determined in 'mm'.
16. L2 = Length of adjacent span of Ln in 'mm'.
17. lb1 to lb2 = Moment of inertia of beams around slab in 'mm4'.
18. Mcr = Cracking Moment.
19. Mu = Factored Bending Moment at a section in 'kNm'.
20. Ptmin = Minimum percentage steel as per chapter 8.
21. PtPrv = Provided percentage steel.
22. Vc = Nominal shear strength provided by concrete in 'kN'.
23. Vu = Factored Shear Force at a section in 'kN'.
24. Vud = Design Shear Force in 'kN'.
25. y = Neutral axis depth.

Code References :
NSCP C101 - 2015

file:///C:/Users/user/AppData/Local/Temp/tmp4417.tmp 2/8/2024
Page 2 of 5

Item CLAUSE / TABLE

1. Ptmax : 407.3.3.1, 408.3.3.1, 409.3.3.1
2. Ptmin : 407.6.1.1 & 408.6.1.1/407.7.2.3
3. Vc : 422.6.5
4. Av : 422.5.10.5 & 422.6.7
5. Moment calculations : 408.10
6. spacing between main bars : 407.7.2
7. spacing between distribution bars : 407.7.6 & 408.7.2
8. Minimum reinforcement : 407.6.1 & 408.6.1
9. fs,perm : 424.3.2.1
10. fc,perm : A.3.1 (ACI 318-99)
11. Wcr : Eq 1-2 ( ACI 224R-01)

Slab No. : S1
Level = 7.5 m
Design Code = NSCP C101 - 2015
Grade Of Concrete = C21
Grade Of Steel = Fy227
Clear Cover = 12.000 mm
Long Span, Ly = 3.000 m
Short Span, Lx = 3.000 m
Imposed Load = 1.000 kN/sqm
Live Load, Qk = 1.900 kN/sqm
Slab Thickness = 125.000 mm
Effective Depth Along LX, Deffx = 108.000 mm
Effective Depth Along LY, Deffy = 98.000 mm
Self Weight = 3.120 kN/sqm
Total Load, TL (ultimate) = 7.990 kN/sqm
Span = 2-Way
Load Combination = 1.2 DL + 1.6 LL

Short Span Long Span

Side1 Side2 Side1 Side2
Beam
B (mm) 250 250 250 250
D (mm) 400 400 400 400
Ib (mm4) x106 1333.33 1333.33 1333.33 1333.33
Adjacent Slab
Thk (mm) 125 - - 125
Span (mm) 3000 - - 3000
Ib (mm4) x106 488.28 244.14 244.14 488.28
αf lx, αf ly 2.73 5.46 5.46 2.73
αf 4.1
Ln (mm) 2750 2750
L2 (mm) 1625 1625
Effective Width (mm) 750 750

file:///C:/Users/user/AppData/Local/Temp/tmp4417.tmp 2/8/2024
Page 3 of 5

Ly/Lx Lx/Ly
1 1
Total BM (kNm) 12.27 12.27
Bottom
Moment Co-efficent 0.57 0.57
Distributed Moment (kNm) 7 7
Moment factor for CS 0.750 0.750
CS Moment (kNm) 5.25 5.25
MS Moment (kNm) 1.75 1.75
Moment on Beam (kNm) 4.46 4.46
Design Moment M1, M3 (kNm) 1.75 1.75
Top
Moment Co-efficent 0.7 0.7
Distributed Moment (kNm) 8.59 8.59
Moment factor for CS 0.750 0.750
CS Moment (kNm) 6.44 6.44
MS Moment (kNm) 2.15 2.15
Moment on Beam (kNm) 5.48 5.48
Design Moment M2, M4 (kNm) 2.15 2.15

Design Moments:
Short Span Positive Moment At Midspan -
M1 = 1.750 kNm
M1 (per m) = M1/Effective
Width
= 2.330 kNm/m
Area Of Reinforcement = 225.000 sqmm/m
Required (BM)
Reinforcement Provided = D12 @ 250 C/C
= 452.000 sqmm/m
Short Span Negative Moment At Continuous Support -
M2 = 2.150 kNm
M2/Effective
M2 (per m) =
Width
= 2.860 kNm/m
Area Of Reinforcement = 225.000 sqmm/m
Required (BM)
Reinforcement Provided = D12 @ 250 C/C
= 452.000 sqmm/m
Long Span Positive Moment At Midspan -
M3 = 1.750 kNm
M3/Effective
M3 (per m) =
Width
= 2.330 kNm/m
Area Of Reinforcement = 225.000 sqmm/m
Required (BM)
Reinforcement Provided = D12 @ 250 C/C
= 452.000 sqmm/m
Long Span Negative Moment At Continuous Support -
M4 = 2.150 kNm

file:///C:/Users/user/AppData/Local/Temp/tmp4417.tmp 2/8/2024
Page 4 of 5

M4/Effective
M4 (per m) =
Width
= 2.860 kNm/m
Area Of Reinforcement = 225.000 sqmm/m
Required (BM)
Reinforcement Provided = D12 @ 250 C/C
= 452.000 sqmm/m
Distribution Reinforcement @ 0.18% -
Area Of Reinforcement = 225.000 sqmm/m
Required
Reinforcement Provided = D12 @ 300 C/C
= 377.000 sqmm/m

file:///C:/Users/user/AppData/Local/Temp/tmp4417.tmp 2/8/2024
Page 5 of 5

Shear Check :
Along Short Span
Vsx (TL(ultimate) x Lx / 4) = 5.990 kN
Nominal Shear, ΦVc = 62.620 kN
> 5.990 Slab Is Safe In Shear
Along Long Span
Vsy (TL(ultimate) x Lx / 2 x = 5.990 kN
(1 - (Lx / (2 x Ly))))
Nominal Shear, ΦVc = 56.820 kN
> 5.990 Slab Is Safe In Shear

file:///C:/Users/user/AppData/Local/Temp/tmp4417.tmp 2/8/2024
2024

FOOTING ANALYSIS
PART 2.C

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO
Footing Design: Project Settings Page 1 of 2

PROJECT SETTINGS
Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Footing-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/8/2024 4:49:56 PM

General Settings
Design Settings
Use Gross SBC : No
Consider Overburden : No
Check For Buoyancy and Sliding : No
Provide Top Reinforcement : No
Provide Face Reinforcement : No

Soil Data
Net SBC : 120 kN/sqm
Soil Density : 18 kN/cum
Founding Depth : 1.5 m
Water Table : 0 m

Cross Section design

Design cross section by : Average pressure

Soil Contact
Permissible loss of contact : 0 %

Design Parameter
Concrete Grade : C21
Steel Grade : Fy227
Clear Cover : 75 mm
Live Load Reduction : 0 %
Type of Soil : Medium
SBC Increase - Earthquake : 0 %
SBC Increase - Wind : 0 %
PCC Thickness : 150 mm
PCC Offset : 150 mm

Dimensional Settings
Plan Round Off : 50 mm
Depth Round Off : 25 mm
Max Steps : 5
Maximum Height : 0 mm
Minimum Height : 350 mm

Reinforcement Settings

file:///C:/Users/user/AppData/Local/Temp/tmp5AF4.tmp 2/9/2024
Footing Design: Project Settings Page 2 of 2

Reinforcement Area
Minimum Bottom : 0.18 %
Minimum Top : 0.13 %
Maximum Bottom : 1.5 %
Maximum Top : 1.5 %
Face Reinforcement : 0.05 %

Rebar
Minimum Bottom Reinforcement : 16
Minimum Top Reinforcement : 16
Maximum Main Reinforcement : 20
Minimum Shear Reinforcement : 10
Maximum Shear Reinforcement : 32
Minimum SFR Reinforcement : 10
Maximum SFR Reinforcement : 32

Rebar
Rebar Selected : 10,12,16,20,25,32,40

Rebar Spacing
Minimum Longitudinal : 100 mm
Maximum Longitudinal : 300 mm
Preferred Longitudinal : 100 mm
Minimum Shear : 100 mm
Maximum Shear Reinforcement : 500 mm
Spacing Roundoff Factor : 5 mm

Crack Width Settings:

Crack Width NSCP C101 - 2015
: No
Check

file:///C:/Users/user/AppData/Local/Temp/tmp5AF4.tmp 2/9/2024
Footing Design: Design Calculation Page 1 of 51

FOOTING DESIGN CALCULATIONS

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Footing-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/8/2024 4:49:56 PM

Definitions:
1. A = Plan area of footing base in 'sqmm'
2. Ast (min) = Area of longitudinal reinforcement as per code in 'sqmm'
3. Ast Prv = Area of tensile reinforcement provided in 'sqmm'
4. Ast Rqd = Area of longitudinal reinforcement from bearing moment and
minimum % steel provided by user and as per code in 'sqmm'
5. Av = Area of shear reinforcement required in 'sqmm/m'
6. AvPrv = Area of shear reinforcement provided in 'sqmm/m'
7. A1 = Bearing area of footing at slope of 1:2 in 'sqmm'
8. A2 = C/s Area of column in 'sqmm'
9. B = Width of footing base in 'mm'
10. Beff = Effective width of footing in 'mm'
11. Boff = Footing offset along B in 'mm'
12. BoffB = Footing offset along B above column in plan in 'mm'
13. BoffT = Footing offset along B below column in planin 'mm'
14. B1 = Width of sloped footing at top in 'mm'
15. ColOff = Column offset in sloped footing in 'mm'
16. Cx = Width of column in 'mm'
17. Cy = Length of Column in 'mm'
18. D = Depth of footing in 'mm'
19. d = Effective Depth of footing in 'mm'
20. Dfd = Depth of founding layer in 'm'
21. Dw = Ground water level in 'm'
22. Ec = Modulus of elasticity of concrete in 'N/sqmm'
23. Es = Modulus of elasticity of steel in 'N/sqmm'
24. Foss = Safety factor against sliding
25. Fosu = Safety factor against uplift
26. Fst = Stress in steel in 'N/sqmm'
27. F'c = Characteristic strength of concrete in 'N/sqmm'
28. Icr = Moment of Inertia of concrete crack section in 'mm4'
29. L = Length of footing base in 'mm'
30. Leff = Effective length of footing in 'mm'
31. Loff = Footing offset along L in 'mm'
32. LoffL = Footing offset along L on left side of column in 'mm'
33. LoffR = Footing offset along L on right side of column in 'mm'
34. L1 = Length of sloped footing at top in 'mm'
35. Mcr = Cracking Moment

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Calculation Page 2 of 51

36. Mx = Bending Moment along column D in 'kNm'

37. Mex = Eccentricity moment along column D
38. Mxx = Total Bending Moment along column D (Mx + Mex)
39. My = Bending Moment along column B in 'kNm'
40. Mey = Eccentricity moment along column B
41. Myy = Total Bending Moment along column B (My + Mey)
42. Muy = Factored moment along column B in 'kNm'
43. Mux = Factored moment along column D in 'kNm'
44. Netdown = Net downward load in 'kN'
45. OB = Maximum permissible offset On bottom side Of column
46. OL = Maximum permissible offset On left side Of column
47. Or = Maximum permissible offset On right side Of column
48. OT = Maximum permissible offset On top side Of column
49. P = Axial load For footing sizing In 'kN'
50. Pcr(axial) = Design pressure at the critical section in 'kN/sqm'
51. P1 = Soil pressure at corner 1 In 'kN/sqm'
52. P2 = Soil pressure at corner 2 'kN/sqm'
53. P3 = Soil pressure at corner 3 'kN/sqm'
54. P4 = Soil pressure at corner 4 'kN/sqm'
55. q = Surcharge Load In 'kN/sqm'
56. sp = Spacing Between bars at outer most layer In 'mm'
57. SPu = Upward Soil Pressure In 'kN/sqm'
58. SPuL = Upward Soil Pressure from left
59. SPuR = Upward Soil Pressure from right
60. SPuB = Upward Soil Pressure from bottom
61. SPuT = Upward Soil Pressure from top
62. Temp1 = Peak Hydration temperature In Degree
63. Temp2 = Seasonal Temperature Variations In Degree
64. Vs Capacity = Shear strength capacity Of provided shear reinforcement 'kN'
65. Vs = Nominal shear strength provided by shear reinforcement, in 'kN'
66. Vc = Nominal shear strength provided by concrete in 'kN'
67. Vu = Design shear force in 'kN'
68. Vus = Strength of shear reinforcement in 'kN'
69. Vx = Shear along major axis in 'kN'
70. Vy = Shear along minor axis in 'kN'
71. Waterpr = Upward water pressure in 'kN/sqm'
72. Waterup = Upward force due to water in 'kN/sqm'
73. WFoot = Add. Wt. due to difference in concrete and soil density in 'kN'
74. WFootc = Weight of footing and column with concrete density in 'kN'
75. WSoil = Weight of soil covering footing area in 'kN'
76. y = Neutral axis depth.
77. Zx = Section modulus of footing base along L in 'mm4'
78. Zy = Section modulus of footing base along B in 'mm4'
79. Φ = Strength reduction factor in shear
80. Φ1 = Strength reduction factor in concrete bearing
81. Φ1Pnb = Bearing strength of column in 'kN'

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Calculation Page 3 of 51

Code References:
NSCP C101 - 2015
Sr.No. Item Clause / Table
1. Ptmax : 407.3.3.1, 408.3.3.1, 409.3.3.1
2. Ptmin : 407.6.1.1 & 408.6.1.1/407.7.2.3
3. Vc : 422.6.5
4. Av : 422.5.10.5 & 422.6.7
5. Max Stirrup Spacing : 409.7.6.2 & 410.7.6.5
6. Vs : 422.5.1.2
7. fs,perm : 424.3.2.1
8. fc,perm : 422.2.2.4.1
9. Wcr : Eq 1-2 ( ACI 224R-01)

Design Code : NSCP C101 - 2015

Footing No : FC1
Column No : C1 ( 300 mm X 300 mm)
Analysis No : 24

Concrete Grade : C21

Steel Grade : Fy227
Clear Cover : 75 mm
Dfd : 1.5 m
Dw : 0m

Density of Soil = 18 kN/cum

Soil Bearing Capacity = 120 kN/sqm
Permissible SBC Increase for EQ = 0 %
Permissible SBC Increase for Wind = 0 %
Live Load Reduction = 0 %
Permissible area of loss of contact = 0 %

Design cross section by Consider overburden : Average pressure

pressure

Footing Type : Pad

Footing Size (L x B x D) : 900mm X 900mm X 350mm
Without considering Effect of Water Table
Footing Self Wt., F1 = 7.09 kN
Soil Weight, S1 = 0 kN
Total Weight, W1 = F1 + S1
= 7.09 kN
Offset Along L (Loff) = 300 mm
Offset Along B (Boff) = 300 mm

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Calculation Page 4 of 51

Check For Maximum Soil Pressure:

Critical Analysis Load Combination = 302
Critical Load Combination = [3] : (LOAD 9: DL) +(LOAD 10: LL)
Pcomb = 14.7 kN
P = Pcomb + W1
P = 21.79 kN
Mx = 0.83 kNm
My = 0.77 kNm
P/A = 26.9 kN/sqm
Mx/Zx = 6.8 kN/sqm
My/Zy = 6.33 kN/sqm
Maximum Soil Pressure = 40.02 kN/sqm
Allowable Soil Pressure = 1x120 kN/sqm
= 120 kN/sqm

Check For Minimum Soil Pressure:

Critical Analysis Load Combination = 301
Critical Load Combination = [2] : (LOAD 9: DL)
Pcomb = 8.8 kN
P = Pcomb + W1
P = 15.88 kN
Mx = 0.72 kNm
My = 0.64 kNm
P/A = 19.61 kN/sqm
Mx/Zx = 5.92 kN/sqm
My/Zy = 5.27 kN/sqm
Minimum Soil Pressure = 8.42 kN/sqm
> 0

Design For Bending:

Bottom Reinforcement Along L:
Critical Analysis Load Combination = 101
Critical Load Combination = [5] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu = 13.51 kN
Mux = 0.92 kNm
Muy = 0.83 kNm
P/A = 16.68 kN/sqm
Mx/Zx = 7.54 kN/sqm
My/Zy = 6.85 kN/sqm

Deff = 267 mm
Beff = 900 mm
SPu = 24.22 kN/sqm
Mu = SPu X B X Loff X Loff / 2
= 0.98 kNm
Ast Rqd = 630 sqmm
Ast (min) = 630 sqmm

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Calculation Page 5 of 51

Ast Prv (Distributed Across Total Width) = 4 - D16 @ 300

= 804.24 sqmm

Bottom Reinforcement Along B:

Critical Analysis Load Combination = 101
Critical Load Combination = [5] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu = 13.51 kN
Mux = 0.92 kNm
Muy = 0.83 kNm
P/A = 16.68 kN/sqm
Mx/Zx = 7.54 kN/sqm
My/Zy = 6.85 kN/sqm

Deff = 251 mm
Leff = 900 mm
SPu = 23.53 kN/sqm
Mu = SPu X L X Boff X Boff / 2
= 0.95 kNm
Ast Rqd = 630 sqmm
Ast (min) = 630 sqmm
Ast Prv (Distributed Across Total Length) = 4 - D16 @ 300
= 804.24 sqmm
Design For Shear:
One Way Shear Along L:
Critical Section @ d from Column Face
= 267 mm
Critical Analysis Load Combination = 101
Critical Load Combination = [5] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu = 13.51 kN
Mux = 0.92 kNm
Muy = 0.83 kNm
P/A = 16.68 kN/sqm
Mx/Zx = 7.54 kN/sqm
My/Zy = 6.85 kN/sqm

Deff = 267 mm
Beff = 900 mm
SPu = 24.22 kN/sqm
Vu = SPu X (Loff - d) X B
= 0.72 kN
φVc = 237.68 kN
Vu < φVc

One Way Shear Along B:

Critical Section @ d from Column Face

= 251 mm

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Calculation Page 6 of 51

Critical Analysis Load Combination = 101

Critical Load Combination = [5] : 1.2 (LOAD 9: DL) +0.5
(LOAD 10: LL)
Pu = 13.51 kN
Mux = 0.92 kNm
Muy = 0.83 kNm
P/A = 16.68 kN/sqm
Mx/Zx = 7.54 kN/sqm
My/Zy = 6.85 kN/sqm

Deff = 251 mm
Leff = 900 mm
SPu = 23.53 kN/sqm
Vu = SPu X (Boff - d) X L
= 1.04 kN
φVc = 205.57 kN
Vu < φVc

Design For Punching Shear:

Critical Section @ d/2 from Column Face
= 130 mm

Critical Analysis Load Combination = 101

Critical Load Combination = [5] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu = 13.51 kN
Mux = 0.92 kNm
Muy = 0.83 kNm
P/A = 16.68 kN/sqm
Mx/Zx = 7.54 kN/sqm
My/Zy = 6.85 kN/sqm

Deff = 259 mm
Leff = 559 mm
Beff = 559 mm
Punching Perimeter = 2236 mm
Punching Area = 579124 sqmm
SPu = Average Pressure
= 16.68 kN/sqm
Vu = { SPu [ (L x B)- (Leff x
Beff)]}
= 8.3 kN
φVn = 987.59 kN
φVc = 651.81 kN
No Shear
Vu < φVc Reinforcement
Required

Load Transfer Check For Load Transfer From Column To Footing

file:///C:/Users/user/AppData/Local/Temp/tmpAD7B.tmp 2/9/2024
Footing Design: Design Summary Page 1 of 4

FOOTING DESIGN SUMMARY

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam Design-
Footing-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Column and Beam
Design.STD
Analysis Last Modified : 2/8/2024 4:49:56 PM

Design Code : NSCP C101 - 2015

Footing No: FC1

Column No: C1 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC2

Column No: C2 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC3

Column No: C3 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC4

file:///C:/Users/user/AppData/Local/Temp/tmp6C4A.tmp 2/9/2024
Footing Design: Design Summary Page 2 of 4

Column No: C4 (300 mm X 300 mm)

Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC5

Column No: C5 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC6

Column No: C6 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC7

Column No: C7 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC8

Column No: C8 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

file:///C:/Users/user/AppData/Local/Temp/tmp6C4A.tmp 2/9/2024
Footing Design: Design Summary Page 2 of 4

Column No: C4 (300 mm X 300 mm)

Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC5

Column No: C5 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC6

Column No: C6 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC7

Column No: C7 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC8

Column No: C8 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

file:///C:/Users/user/AppData/Local/Temp/tmp6C4A.tmp 2/9/2024
Footing Design: Design Summary Page 3 of 4

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC9

Column No: C9 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC10

Column No: C10 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC11

Column No: C11 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

4-D16 @ 4-D16 @
900x900x350 - - - - -
300 300

Footing No: FC15

Column No: C15 (300 mm X 300 mm)
Footing Type: Pad
Concrete Grade: C21
Steel Grade: Fy227

Size (LxBxD) Bot @ L Bot @ B Top @ L Top @ B Shear @ L Shear @ B SFR

6-D16 @ 6-D16 @ 6-D16 @ 6-D16 @
1450x1450x350 - - -
300 300 290 290

file:///C:/Users/user/AppData/Local/Temp/tmp6C4A.tmp 2/9/2024
2024
TRUSS DESIGN & ANALYSIS
OUTPUT
PART 2.E

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO
Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 1

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

Job Information
Engineer Checked Approved

Name:
Date: 09-Feb-24

Comments:
Structure Type: SPACE FRAME

Geometry
Entity Type Count Highest

Nodes 10 10
Analytical Members 17 17

Load Cases
Load Case Type Count

Primary 4
Combination 5

Included in this printout are data for:

All The Whole Structure

Load Case Table

Included in this printout are results for load cases:

L/C Type Name

1 Primary DL
2 Primary LL
3 Primary WL-Z
4 Primary WL+Z
101 Combination COMB - 1 Dead
102 Combination COMB - 1 Dead + 1 Roof Live
103 Combination COMB - 1 Dead + 0.75 Roof Live
104 Combination COMB - 1 Dead + 0.6 Wind (1)
105 Combination COMB - 1 Dead + 0.6 Wind (2)

Beam Loads
L/C Beam Type Directi Fa Da Fb Db Ecc.
on
(m) (m) (m)

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 1 of 5

Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 2

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

L/C Beam Type Directi Fa Da Fb Db Ecc.

on
(m) (m) (m)
UNI
1 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
2 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
3 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
4 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
5 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
6 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
7 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
8 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
1 9 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
10 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
11 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
12 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
13 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
14 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
15 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
16 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
17 GY -0.800 0.000 0.000 0.000 0.000
(kN/m)
UNI
1 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
2 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
3 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
4 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
2 5 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
6 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
7 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
8 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
9 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 2 of 5

Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 3

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

L/C Beam Type Directi Fa Da Fb Db Ecc.

on
(m) (m) (m)
UNI
10 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
11 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
12 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
13 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
2
UNI
14 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
15 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
16 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
17 GY -0.400 0.000 0.000 0.000 0.000
(kN/m)
UNI
1 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
2 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
3 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
4 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
5 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
6 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
7 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
8 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
3 9 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
10 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
11 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
12 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
13 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
14 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
15 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
16 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
17 GY 1.770 0.000 0.000 0.000 0.000
(kN/m)
UNI
4 1 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 3 of 5

Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 4

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

L/C Beam Type Directi Fa Da Fb Db Ecc.

on
(m) (m) (m)
UNI
2 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
3 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
4 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
5 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
6 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
7 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
8 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
9 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
4
UNI
10 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
11 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
12 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
13 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
14 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
15 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
16 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)
UNI
17 GY -1.340 0.000 0.000 0.000 0.000
(kN/m)

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 4 of 5

Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 5

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

Truss

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 5 of 5

Job No. Sheet No. Rev

Software licensed to only @::LAVteam::Â® 5

Connected User: user@edu Non commercial
Job Title Part Re
f
Client B Date Chd
y
09-Feb-24
File Date Time
tRUSS dESIGN.STD 09-Feb-2024 19:00

Truss

09 Feb 2024 07:14:32 PM STAAD.Pro 2023 23.00.01.25 5 of 5

Job No Sheet No Rev
1
Part
Software licensed to only @::LAVteam::Â®
Job Title Ref

By Date09-Feb-24 Chd

Client File tRUSS dESIGN.STD Date/Time 09-Feb-2024 19:00

STAAD.Pro Query Geometry

Beam no. 6

0.635cm

Section: L20204 LD SP 0.00 4.445cm

Length = 1.503m, Beta = 0

Node X-Coord (m) Y-Coord (m) Z-Coord (m)

7 0.000 8.900 3.000
8 0.000 9.000 4.500

Print Time/Date: 09/02/2024 19:04 STAAD.Pro 2023 23.00.01.25 Print Run 1 of 1

2024
SHEARWALL DESIGN &
ANALYSIS OUTPUT
PART 2.F

[STRUCTURAL DESIGN AND

ANALYSIS]
LOCATION : 17-B Gov’t. Center Subd., Military cut-off, Baguio City
OWNER : SPS. GEOFFREY C. GERARDO & CHARON G. GERARDO
Column Design: Design Calculations Page 1 of 193

COLUMN DESIGN CALCULATIONS

Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Sherawall Design-Column-1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Sherawall Design.STD
Analysis Last Modified : 2/9/2024 5:13:35 PM

Definitions Of Terms:
All forces in units 'kN' and 'm'
All reinforcement details like area, spacing in 'mm'
Neutral axis angle for resultant design moment is with respect to local major axis.
Ratio to account for reduction of stiffness of columns due to sustained
1 βdns =
axial loads
2 δns = Moment magnification factor for frames not braced against sidesway
First-order relative deflection between the top and bottom of the story
3 Δo =
due to Vu in 'kN'
4 ∑Pu = Total factored vertical load in 'kN'. (Clause 406.6.4.4)
5 δu = Design displacement in 'mm'
Modification factor reflecting the reduced mechanical properties Of
6 λ =
concrete
Coefficient defining the relative contribution Of concrete strength To
7 ac =
nominal wall shear strength
Cross-sectional area of a structural member measured to the outside
8 Ach =
edges of transverse reinforcement in 'sqmm'
Gross area of concrete section bounded by web thickness And length of
9 Acv =
section in the direction Of shear force considered in 'sqmm'
Effective cross-sectional area within a joint In a plane parallel To plane
10 Aj =
Of reinforcement generating shear In the joint in 'sqmm'
11 As = Area Of non-prestressed longitudinal tension reinforcement in 'sqmm'
12 Avmin = Minimum area Of shear reinforcement within spacing 's' in 'sqmm'
13 B = Width of column/ wall in 'mm'
14 beff = Effective Width of column/ wall in 'mm'
Cross-sectional dimension of member core measured to the outside
15 bc1 and dc1 =
edges of the transverse reinforcement composing area Ash in 'mm'
16 c = Distance from extreme compression fiber to neutral axis in 'mm'
17 Cc = Clear cover to longitudinal reinforcement in 'mm'
Factor relating actual moment diagram to an equivalent uniform moment
18 Cm =
diagram
19 D = Depth / diameter of column in 'mm'
20 deff = Effective Depth / diameter of column in 'mm'
Distance from extreme compression fiber to centroid of longitudinal
21 d =
tension reinforcement in 'mm'
Distance from extreme compression fiber to centroid of longitudinal
22 d' =
compression reinforcement,'mm'
23 Ec = Modulus of elasticity of concrete in 'N/sqmm'
24 EI = Flexural stiffness of compression member in 'Nsqmm'
25 f'c = Specified compressive strength of concrete cylinder in 'N/sqmm'
26 fy = Specified yield strength of reinforcement in 'N/sqmm'
27 fyt = Specified yield strength fy of transverse reinforcement in 'N/sqmm'
Height of entire wall from base to top of wall segment considered in
28 hw =
'mm'
29 Icr = Moment of Inertia of concrete crack section
30 k = Effective length factor for compression member
Length of compression member in a frame, measured center-to-center of
31 lc =
the joints in the frame in 'mm'
Moment of inertia of gross concrete section about centroidal axis
32 lg =
neglecting reinforcement in 'mm4'
33 lw = Length of entire wall in 'mm'
34 lux = Un-supported length for compression member along D in 'mm'
35 luy = Un-supported length for compression member along B in 'mm'

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 2 of 193

36 MCap = Moment capacity of section for a given NA angle at design Pu in 'kNm '
37 Mcr = Cracking Moment
Resultant design moment at a given load angle to local major axis in
38 MRes =
'kNm '
Factored moment amplified for the effects of member curvature used for
39 Mc =
design of compression member in 'kNm'
Factored moment modified to account for effect of axial compression in
40 Mm =
'kNm'
Factored moment along D of column modified to account for effect of
41 Mmx =
axial compression in 'kNm'
Factored moment along D of column modified to account for effect of
42 Mmy =
axial compression in 'kNm'
43 Mur = Sqrt (Mmy^2 + Mmx^2) for circular column in 'kNm'
Factored moment acting on a section along D in 'kNm' from Analysis
44 Mux =
(Momemt About Major Axis)
Factored moment acting on a section along B in 'kNm' from Analysis
45 Muy =
(Momemt About Minor Axis)
46 M1 = Smaller factored end moment on a compression member in 'kNm'
Factored end moment on a compression member at the end at which M1
47 M1ns =
acts, due to loads that cause no appreciable sidesway in 'kNm'
Factored end moment on compression member at the end at which M1
48 M1s =
acts, due to loads that cause appreciable sidesway in 'kNm'
Smaller factored end moment on a compression member due to
49 M1sldr =
slenderness effect in 'kNm'
50 M2 = Larger factored end moment on compression member in 'kNm'
51 M2min = Minimum value of moment M2 as per minimum eccentricity of column
Factored end moment on compression member at the end at which M2
52 M2ns =
acts, due to loads that cause no appreciable sidesway in 'kNm'
Factored end moment on compression member at the end at which M2
53 M2s =
acts, due to loads that cause appreciable sidesway in 'kNm'
Largest factored end moment on a compression member due to
54 M2sldr =
slenderness effect in 'kNm'
55 Mnb = Flexure Capacity for Beam
56 Mnc = Flexure Capacity for Column
57 Mnty = Nominal Flexure strength of column at top along depth in 'kNm'
58 Mnby = Nominal Flexure strength of column at bottom along depth in 'kNm'
59 Mntx = Nominal Flexure strength of column at top along width in 'kNm'
60 Mnbx = Nominal Flexure strength of column at bottom along width in 'kNm'
Factored axial force normal to cross section occurring simultaneously
61 Nu =
with Vu in 'kN'
62 Pc = Critical buckling load in 'kN'
Ratio of area of distributed transverse reinforcement to gross concrete
63 pt =
area perpendicular to that reinforcement
64 Pω = Ratio of As to B x d
65 Q = Stability index for storey
66 r = Radius of gyration of cross section of a compression member in 'mm'
67 Vc = Nominal shear strength provided by concrete in 'kN'
68 Vj = Shear Force acting at the joint in 'kN'
69 Vn = Nominal shear strength in 'kN'
70 Vn' = Nominal shear strength at joint in 'kN'
71 Vs = nominal shear strength provided by shear reinforcement in 'kN'
Maximum nominal shear strength provided by shear reinforcement in
72 Vs permissible =
'kN'
73 Vur = Factored resultant shear force acting on the column in 'kN'
74 Vus = Factored horizontal shear in a storey in 'kN'
75 Vux = Factored shear at section along B in 'kN' (From Analysis)
76 Vux1 = Shear induced due to column flexural capacity along width,'kN'
77 Vux2 = Shear due to enhanced earthquake factor along width, 'kN'
78 Vuy = Factored shear at section along D in 'kN' (From Analysis)
79 Vuy1 = Shear induced due to column flexural capacity along depth, 'kN'
80 Vuy2 = Shear due to enhanced earthquake factor along depth, 'kN'
81 y = Neutral axis depth.

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 3 of 193

82 β = It is a Neutral Axis angle corresponding to load angle to find out MCap

Center to center spacing of transverse reinforcement within the length lo
83 So =
in 'mm'
Length, measured from joint face along axis of member, over which
84 lo =
special transverse reinforcement must be provided in 'mm'

Code References:
NSCP C101 - 2015
Sr.No Element Clause / table
1 Minimum area of longitudinal reinforcement for column : 418.7.4
2 Maximum area of longitudinal reinforcement for column : 418.7.4
3 Minimum longitudinal and transverse reinforcement for wall : 418.10.2.1
4 Minimum diameter of transverse ties : 425.7.2
5 Minimum spacing of transverse ties : 425.7.2
Maximum spacing of longitudinal and transverse
6 : 418.10.2.1
reinforcement for wall
7 Applicability of boundary element : 418.10.6
8 Area and spacing of special confining reinforcement : 418.7.5
9 Slenderness Moments : 406.2.5
10 Shear Strength provided by concrete for column : 422.5.5
11 Design of shear for non-ductile wall : 411.5.4
12 Design of shear for ductile wall : 418.10.4.1
13 Minimum Flexural Strength of Columns : 418.7.3
14 Shear Check at Column Joint : 418.8.4.1
15 Shear Strength of Column : 418.3.3, 418.4 & 418.6.5
16 fs,perm : 424.3.2.1
17 fc,perm : A.3.1 (ACI 318-99)
18 Wcr : Eq 1-2 ( ACI 224R-01)
Combined Wall No. = CW1
Elements = C14,C15,C16,C17,C18
Level : 0 m To 1.5 m
Grade Of Concrete (f'c) = C21 N/sqmm
Grade Of Steel (Main) = Fy414 N/sqmm
Grade Of Steel (Shear) = Fy414 N/sqmm
Grade Of Steel - Flexural Design = Fy414 N/sqmm
Grade Of Steel - Shear Design = Fy414 N/sqmm
Clear Cover = 50 mm
Design Code = NSCP C101 - 2015
General Data
Column No. : C14
Ductile detailing = Yes
Type of Frame = Special
Column B = 300 mm
Column D = 300 mm
Clear Floor Height @ lux = 1150 mm
Clear Floor Height @ luy = 1150 mm
No Of Floors = 1
No Of Columns In Group = 1
Strength Reduction Factor φ (Shear) = 0.6

Flexural Design (Analysis Forces)

Analysis Reference No. = 36
Critical Analysis Load Combination : 101

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 4 of 193

Load Combination = [1] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Critical Location = Top Joint
Put = -3.67 kN
Muxt = 0.06 kNm
Muyt = 1.6 kNm
Vuxt = 1.62 kN
Vuyt = -0.06 kN
Pub = -7.49 kN
Muxb = -0.03 kNm
Muyb = -0.84 kNm
Vuxb = 1.62 kN
Vuyb = -0.06 kN

Check For Stability Index

Along D
Q = 0.01
0.01< 0.05, Column shall be designed as non-sway frame (Braced)

Along B
Q = 0.01
0.01< 0.05, Column shall be designed as non-sway frame (Braced)

Since Axial Force is Tensile, Slenderness check is not performed

Calculation of Design Moment
Direction Manalysis Msldr or Mc Mdesign-final
A B C
Major Axis Mux (top) 0.06 - 0.06
Major Axis Mux (bottom) -0.03 - -0.03
Minor Axis Muy (top) 1.6 - 1.6
Minor Axis Muy (bottom) -0.84 - -0.84

Where
A = Moments from analysis
B = Moment due to slenderness effect
C = Final design Moment = Maximum of (Manalysis, Maximum of (Msldr or Mc))

Final Critical Design Forces

Critical Case - Axial Load & BiAxial Bending
Pu = -3.67 kN
Mux = 0.06 kNm
Muy = 1.6 kNm

Φ Pn, Max Check

Critical Analysis Load Combination = 101
Load Combination = [1] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Critical Location = Top Joint
Pu = -3.67 kN
Mux = 0.06 kNm
Muy = 1.6 kNm
Pt Calculated = 1.01
φ Pn, Max = 1009.17 kN
Pu < φ Pn, Max Hence, OK

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 5 of 193

Minimum Ast Calculation

Critical Analysis Load Combination = 101
Load Combination = [1] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu-max from all Combinations = -3.67 kN
Pt required for Pu-max = 0 %
Pt min (User Defined) = 1 %
Minimum Pt required = 1 %

Resultant Moment (Combined Action)

Moment Capacity Check
Pt Calculated = 1.01
Reinforcement Provided = 8-D12
Load Angle = Tan-1(Muy/Mux)
= 88.02 deg
MRes = 1.6 kNm
( φ ) MCap = 38.49 kNm
Capacity Ratio = MRes/ MCap
= 0.042 < 1

Shear Calculation (Analysis

Along D Along B
Forces)
Critical Analysis Load 101 101
Combination
Critical Load Combination [1] : 1.2 (LOAD 9: DL) +0.5 [1] : 1.2 (LOAD 9: DL) +0.5
(LOAD 10: LL) (LOAD 10: LL)
Nu (kN) -7.49 -7.49
Mu (kNm) 0.03 0.84
Vu3 (kN) -0.06 1.62
λ 1 1
φ 0.6 0.6
Deff (mm) 244 244
ρw (50% of As provided) 0.006 0.006
Mm (kNm) 0.92 1.73
φVc (kN) 33.13 33.13
Check Vu < φVc Vu < φVc
Link For Shear Design Not Required Not Required

Design Of Links
Links in the zone where special confining links are not required
Normal Links

Maximum Longitudinal Diameter = Dia Of Rebar

Rebar Number of bundled bar, D1 = 12
Diameter of bundled bar, D1 = 12 mm
Bundled Rebar = No
Minimum diameter of link >= 9.5 mm
Provided Link Rebar Number = 10
Provided Diameter of link = 10 mm

Criterion for spacing of normal links

Min. Longitudinal Bar dia X 16 = 192 mm
48 x diameter of links = 480 mm
Min. Dimension of column = 300 mm

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 6 of 193

Spacing Criteria as per Vs & 0.33*Sqrt (f'c)

*Aeff
Along D
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 109.85 kN
Vs <= 0.33*Sqrt
Check
(f'c)*B*d
d/2 = 122 mm
600 = 600 mm

Along B
Vs = 0 kN
0.33*Sqrt (f'c)*Aeff = 109.85 kN
Vs <=0.33*Sqrt
Check
(f'c)*B*d
b/2 = 122 mm
600 = 600 mm
Provided spacing = 150 mm

Along B
Av/s min-1 = 0.062 x Sqrt(f'c) x D x 1000 / fyt
= 204.31 sqmm/m
Av/s min-2 0.35 x B x 1000 / fyt
= 253.62 sqmm/m
Av/s min = Max ( Av/s min-1, Av/s min-2)
= 253.62 sqmm/m
Criterion for spacing of Ductile links:
Min. Longitudinal Bar dia x 6 = 72 mm
B/4 = 75 mm
So = 150 mm
Max 150 mm = 150 mm
Provided Spacing = 50 mm

Special confining reinforcement as per NSCP

C101 - 2015
Load Combination = [1] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Pu = -3.67 kN
Check for Ash
0.3 x Ag x f'c = 558.36 kN
Pu <= 0.3 x Ag x
f'c
f'c = 20.68 N/sqmm
f'c <= 70
Along D
No of bars along D = 3
S1 = 50 mm
Ag = 90000 sqmm

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Column Design: Design Calculations Page 7 of 193

bc1 = 220 mm
Ach = 48400 sqmm
AshD1 = 141.68 sqmm
AshD2 = 49.45 sqmm
AshD (Max (AshD1, AshD2)) = 141.68 sqmm
AshD Provided = 235.62 sqmm
Along B
No of bars along B = 3
S1 = 50 mm
Ag = 90000 sqmm
dc1 = 220 mm
Ach = 48400 sqmm
AshB1 = 141.68 sqmm
AshB2 = 49.45 sqmm
AshB (Max (AshB1, AshB2)) = 141.68 sqmm
AshB Provided = 235.62 sqmm
Provided Links = #10@50 c/c

Numbers of legs provided along D = 3

Av/s provided along D = 4712.4 sqmm/m
Numbers of legs provided along B = 3
Av/s provided along B = 4712.4 sqmm/m
Hence, OK

Length of Confining Zone

Column maximum dimension = 300 mm
Clear height /6 = 191.7 mm
Min. 450 mm = 450 mm
Zone length = 450 mm

Table For Links

Note: Ductile Design of Links is Applicable Only For Boundary Elements
Required Provided
Normal Design Shear Design Ductile Design Normal Zone Ductile Zone
Link Rebar Number 10 --- 10 10 10
Spacing 150 --- 50 150 50

General Data
Column No. : C15
Ductile detailing = Yes
Type of Frame = Special
Column B = 300 mm
Column D = 300 mm
Clear Floor Height @ lux = 1150 mm
Clear Floor Height @ luy = 1150 mm
No Of Floors = 1
No Of Columns In Group = 1
Strength Reduction Factor φ (Shear) = 0.6

Flexural Design (Analysis Forces)

Analysis Reference No. = 37
Critical Analysis Load Combination : 101
Load Combination = [1] : 1.2 (LOAD 9: DL) +0.5 (LOAD 10: LL)
Critical Location = Top Joint
Put = -1.74 kN

file:///C:/Users/user/AppData/Local/Temp/tmpB311.tmp 2/9/2024
Page 1 of 2

PROJECT SETTINGS
Project Name : Proposed One-Storey with Basement Residence_ Military Cut-off_ B.C.
Client Name : Sps. Geofrey C. Gerardo & Charon G. Gerardo
Engineer Name : nic
Design File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Sherawall Design-Column-
1.rcdx
Analysis File : E:\Staad Connect 2024\Job.03.Gerardo Police haus\Sherawall Design.STD
Analysis Last Modified : 2/9/2024 5:13:35 PM

Crack Width Settings

Crack Width ACI 224R-01 Check : No

Analysis Materials Used : No

Minimum Eccentricity Check : Simultaneously(Both Axes)

Reinforcement Settings
Column % Reinforcement
Minimum : 1
Maximum : 4

Shear Wall % Reinforcement

Minimum : 0.25
Maximum : 4

Longitudinal Bar Spacing

Minimum : 75 mm
Maximum : 300 mm

Preferred Bar Spacing

file:///C:/Users/user/AppData/Local/Temp/tmp6392.tmp 2/9/2024
Page 2 of 2

Equi Spaced Arr. : 125 mm

Zone1 : 75 mm
Zone2 : 100 mm
Mid Zone : 200 mm

Link Spacing
Minimum : 125 mm
Maximum : 300 mm

Available Rebar
Rebar. Used : 10,12,16,20,25

Column Rebar
Minimum : 12
Maximum : 25

Shear Wall Rebar

Minimum : 10
Maximum : 25

Link Rebar
Minimum : 10
Maximum : 12

Links Style
Columns : Hoops
Walls : Ties
Tie Style : Open

Main Link with Boundary Element : Master Link

Round Off Factor

Spacing Round Off : 25 mm
Zone Round Off : 25 mm

Zone Bar Settings

Zonal
Equi-Spaced No.
Edge Zonal Length No.of Bars/Spc(EF)
of Bars/Spc
Length Z1 Z2 Mid Z1 Z2 Mid
Nos Spc Nos Spc Nos Spc Nos Spc
200 2 68 0 0 0 0 0 0 0 0 0
250 2 118 0 0 0 0 0 0 0 0 0
300 3 84 0 0 0 0 0 0 0 0 0
350 3 109 0 0 0 0 0 0 0 0 0
2400 20 119 500 0 1400 6 87 0 0 6 200
3000 24 125 475 475 1100 6 82 5 95 5 183

file:///C:/Users/user/AppData/Local/Temp/tmp6392.tmp 2/9/2024

Design Input
No ratings yet
Design Input
36 pages
3-Storey Residential Building Analysis
No ratings yet
3-Storey Residential Building Analysis
27 pages
Roof Design
No ratings yet
Roof Design
5 pages
Final Year Project
No ratings yet
Final Year Project
69 pages
Seismic Staad Results Three Storey Residential
No ratings yet
Seismic Staad Results Three Storey Residential
9 pages
Truss Design1
No ratings yet
Truss Design1
10 pages
PLATE 12-Barroga - STAAD Input
No ratings yet
PLATE 12-Barroga - STAAD Input
6 pages
Wood System
No ratings yet
Wood System
454 pages
Statical Report
No ratings yet
Statical Report
78 pages
COMPARITIVE STUDY OF EFFECT OF FLOATING COLUMNS ON THE COST ANALYSIS OF A STRUCTURE DESIGNED ON STADD PRO V8i.
No ratings yet
COMPARITIVE STUDY OF EFFECT OF FLOATING COLUMNS ON THE COST ANALYSIS OF A STRUCTURE DESIGNED ON STADD PRO V8i.
13 pages
Keshra JP Print 11.04.25
No ratings yet
Keshra JP Print 11.04.25
77 pages
KHENSTAAD
No ratings yet
KHENSTAAD
5 pages
Postprocessing Report v2
No ratings yet
Postprocessing Report v2
12 pages
Structural Load Analysis
No ratings yet
Structural Load Analysis
49 pages
Summary Report
No ratings yet
Summary Report
3 pages
Ipd Jeli Trimmer Beam
No ratings yet
Ipd Jeli Trimmer Beam
3 pages
Mindoro Retaining Wall
No ratings yet
Mindoro Retaining Wall
28 pages
Group 4 Project Report
No ratings yet
Group 4 Project Report
83 pages
Proposed 5-Storey Residential Building: (Staad Report)
No ratings yet
Proposed 5-Storey Residential Building: (Staad Report)
4 pages
Ijciet 08 05 062
No ratings yet
Ijciet 08 05 062
7 pages
Report. (Assignment 03
No ratings yet
Report. (Assignment 03
30 pages
Job Information: Engineer Checked Approved
No ratings yet
Job Information: Engineer Checked Approved
6 pages
Mini Project - Analysis of Residential Building Using ETABS
No ratings yet
Mini Project - Analysis of Residential Building Using ETABS
40 pages
Architects: Structural Engineers
No ratings yet
Architects: Structural Engineers
8 pages
Kawasaki
No ratings yet
Kawasaki
3 pages
Structural Design Report for Mixed Residence
No ratings yet
Structural Design Report for Mixed Residence
54 pages
Structural Analysis and Design Calculation of The Proposed Two Storey Residential Building
No ratings yet
Structural Analysis and Design Calculation of The Proposed Two Storey Residential Building
56 pages
4 - TN Ub Structural R0
No ratings yet
4 - TN Ub Structural R0
7 pages
Ce5e Suan RC
No ratings yet
Ce5e Suan RC
118 pages
Etabs Project
No ratings yet
Etabs Project
11 pages
Analysis and Design of High Rise Building Frames - Base Paper
No ratings yet
Analysis and Design of High Rise Building Frames - Base Paper
3 pages
Solar MMS - Superstructure For Delhi NCR Location
No ratings yet
Solar MMS - Superstructure For Delhi NCR Location
12 pages
XtraReport Merged
No ratings yet
XtraReport Merged
27 pages
STAAD.Pro Advanced Software License Details
No ratings yet
STAAD.Pro Advanced Software License Details
11 pages
Comparative Analysis of STAAD Pro & ANSYS
No ratings yet
Comparative Analysis of STAAD Pro & ANSYS
4 pages
Analysis and Design of Multistoried Buildingusing Etabs
No ratings yet
Analysis and Design of Multistoried Buildingusing Etabs
9 pages
Irjet V8i7194
No ratings yet
Irjet V8i7194
7 pages
Mezzanine 02 Output
No ratings yet
Mezzanine 02 Output
52 pages
Final Year Project II: Structural Design
No ratings yet
Final Year Project II: Structural Design
180 pages
Residential Building Design with ETABS
No ratings yet
Residential Building Design with ETABS
6 pages
Analysis, Design and Estimation of Basement+G+2 Residential Building
No ratings yet
Analysis, Design and Estimation of Basement+G+2 Residential Building
15 pages
Design and Analysis of RCC Framed Structure (G+5) by Using STAAD - Pro and STAAD - Etc
100% (1)
Design and Analysis of RCC Framed Structure (G+5) by Using STAAD - Pro and STAAD - Etc
6 pages
Structural Design for Hospital
No ratings yet
Structural Design for Hospital
64 pages
Seismic Design for Residential Building
No ratings yet
Seismic Design for Residential Building
40 pages
PPR Lahad Roof
No ratings yet
PPR Lahad Roof
293 pages
Analysis and Design of G+8 RCC Building Using ETABS: Mr. Saurabh N. Ugale, Mr. Sachin U. Pagar
No ratings yet
Analysis and Design of G+8 RCC Building Using ETABS: Mr. Saurabh N. Ugale, Mr. Sachin U. Pagar
10 pages
Bhagya Lakshmi Staad Project
No ratings yet
Bhagya Lakshmi Staad Project
12 pages
Structural Analysis
No ratings yet
Structural Analysis
169 pages
STAAD.Pro Space Frame Analysis
No ratings yet
STAAD.Pro Space Frame Analysis
103 pages
Steel Frame Report
No ratings yet
Steel Frame Report
34 pages
CAD in Structural Engineering Report
No ratings yet
CAD in Structural Engineering Report
35 pages
Analysis and Design of Multi Storey Stru
No ratings yet
Analysis and Design of Multi Storey Stru
6 pages
ETABS Modeling Checklist Guide
No ratings yet
ETABS Modeling Checklist Guide
8 pages
Tagorda Structura Design Report
No ratings yet
Tagorda Structura Design Report
151 pages
Bogador Strucl Design
No ratings yet
Bogador Strucl Design
87 pages
Cagaid Strucl Design Report. 10.12.2025
No ratings yet
Cagaid Strucl Design Report. 10.12.2025
184 pages
BuildPass Requirements 2024
No ratings yet
BuildPass Requirements 2024
1 page
TB Settings
No ratings yet
TB Settings
2 pages
Sherawall Design Sumary
No ratings yet
Sherawall Design Sumary
193 pages
Footing Design Calculation
No ratings yet
Footing Design Calculation
51 pages
2F Design Summary
No ratings yet
2F Design Summary
17 pages
Column Design Calculations Overview
No ratings yet
Column Design Calculations Overview
34 pages
Dance History & Fitness Quiz
No ratings yet
Dance History & Fitness Quiz
3 pages
Vessel Tolerance Chart
No ratings yet
Vessel Tolerance Chart
1 page
Farm Animal Guessing Game
No ratings yet
Farm Animal Guessing Game
2 pages
Clustalo I20240312 103948 0461 40208867 p1m Aln Clustal - Num
No ratings yet
Clustalo I20240312 103948 0461 40208867 p1m Aln Clustal - Num
2 pages
KSC-31 Revised
No ratings yet
KSC-31 Revised
6 pages
Nexia 1.5 Technical Specs Guide
No ratings yet
Nexia 1.5 Technical Specs Guide
1 page
DPR, Lulu Mall, Lucknow
No ratings yet
DPR, Lulu Mall, Lucknow
8 pages
Skeletal System Overview
No ratings yet
Skeletal System Overview
6 pages
Lalkitab Grammer Debt
No ratings yet
Lalkitab Grammer Debt
14 pages
An Enemy of The People
No ratings yet
An Enemy of The People
145 pages
Bacterial Plant Pathology Cell and Molecular Aspects 1st Pbk. Ed Edition David C. Sigee Instant Download
No ratings yet
Bacterial Plant Pathology Cell and Molecular Aspects 1st Pbk. Ed Edition David C. Sigee Instant Download
81 pages
Acute Watery Diarrhea Report
No ratings yet
Acute Watery Diarrhea Report
1 page
08 - Kütahya Patterns Out of The Blue
No ratings yet
08 - Kütahya Patterns Out of The Blue
8 pages
Instruction Manual: Portable PH and pH/ISE Meters
No ratings yet
Instruction Manual: Portable PH and pH/ISE Meters
108 pages
Thai Yoga Massage-Beginners Course
100% (3)
Thai Yoga Massage-Beginners Course
66 pages
Air Asia Shortlist List - Online Test
No ratings yet
Air Asia Shortlist List - Online Test
10 pages
"From: Secrets and Miracles Unveiled"
No ratings yet
"From: Secrets and Miracles Unveiled"
42 pages
Examinatin in Intensive Care
100% (4)
Examinatin in Intensive Care
731 pages
030 Taiko Kikai
No ratings yet
030 Taiko Kikai
4 pages
S. Aureus vs. S. Epidermidis Virulence Factors
No ratings yet
S. Aureus vs. S. Epidermidis Virulence Factors
17 pages
Vertebral Column of Scoliodon
No ratings yet
Vertebral Column of Scoliodon
9 pages
Anskey
No ratings yet
Anskey
27 pages
BE - 3110014 - Mathematics 1 - Tutorial - 2023 - 24
50% (2)
BE - 3110014 - Mathematics 1 - Tutorial - 2023 - 24
19 pages
6 BDC
No ratings yet
6 BDC
5 pages
Fatigue Life & Crack Prevention
No ratings yet
Fatigue Life & Crack Prevention
24 pages
9201 Question Paper1 International Gcse Biology Jun22
100% (2)
9201 Question Paper1 International Gcse Biology Jun22
32 pages
Digital Signal Processing A Practical Guide For Engineers and Scientists Steven W. Smith Ebook Chapter Pack
100% (3)
Digital Signal Processing A Practical Guide For Engineers and Scientists Steven W. Smith Ebook Chapter Pack
150 pages
HSG 205 Skin Exposure
100% (1)
HSG 205 Skin Exposure
34 pages
Lab. 2 Med. Virology & Parasitology
No ratings yet
Lab. 2 Med. Virology & Parasitology
3 pages
Easy Link 4 SB PDF
100% (1)
Easy Link 4 SB PDF
54 pages