East DElhi public school
CS REPORT FILE
coDE FilE
sEssioN 2022-2023
NaME:-RitEsh KuMaR pal
class:-12th ‘b’
Roll No. :-34
subJEct:-coMputER sciENcE
subMittED to:- MR.s pRiyaNKa MaM
subMittED by:- RitEsh KuMaR pal
Certificate
This is to certify that
RITESH KUMAR PAL of
class XII Springdale has
worked on the project
“SOME CODEING FILE”
to my full satisfaction.
DATE:-
SIGNATURE:-
{MR.s PRIYANKA MAM}
It is a pleasure to acknowledge many
people who knowingly helped me
complete my project. First and
foremost, I would like to express my
regards towards PRIYANKA
MAM the honorable teacher of my
school for her encouragement and
guidance. I would also like to express
my immense gratitude towards ,
cooperation and support extended
during the completion of this project.
(RITESH KUMAR PAL)
Program:1
Write a python Program to take input for a number, calculate and print its square
and cube?
a=int(input("Enter any no "))
b=a*a
c=a*a*a
print("Square = ",b)
print("cube = ",c)
Output:
Enter any no 10Square = 100cube = 1000>>>
Program:2
Write a python program to take input for 2 numbers, calculate and print their sum,
product and difference?
a=int(input("Enter 1st no "))
b=int(input("Enter 2nd no "))
s=a+b
p=a*b
if(a>b):
d=a-b
else:
d=b-a
print("Sum = ",s)
print("Product = ",p)
print("Difference = ",d)
Output:
Enter 1st no 10Enter 2nd no 20Sum = 30Product = 200Difference
= 10>>>
Program:3
Write a python program to take input for 3 numbers, check and print the largest
number?
a=int(input("Enter 1st no "))
b=int(input("Enter 2nd no "))
c=int(input("Enter 3rd no "))
if(a>b and a>c):
m=a
else:
if(b>c):
m=b
else:
m=c
print("Max no = ",m)
Output:
Enter 1st no 25Enter 2nd no 63Enter 3rd no 24Max no = 63>>>
Method:2
num1=int(input("Enter 1st no "))
num2=int(input("Enter 2nd no "))
num3=int(input("Enter 3rd no "))
if(num1>num2 and num1>num3):
max=num1
elif(num2>num3):
max=num2
else:
max=num3
print("Max no = ",max)
Output:
Enter 1st no 25Enter 2nd no 98Enter 3rd no 63Max no = 98>>>
Program:4
Write a python program to take input for 2 numbers and an operator (+ , – , * ,
/ ). Based on the operator calculate and print the result?
a=int(input("Enter 1st no "))
b=int(input("Enter 2nd no "))
op=input("Enter the operator (+,-,*,/) ")
if(op=="+"):
c=a+b
print("Sum = ",c)
elif(op=="*"):
c=a*b
print("Product = ",c)
elif(op=="-"):
if(a>b):
c=a-b
else:
c=b-a
print("Difference = ",c)
elif(op=="/"):
c=a/b
print("Division = ",c)
else:
print("Invalid operator")
First Run Output:
Enter 1st no 10Enter 2nd no 20Enter the operator (+,-,*,/)
+Sum = 30>>>
Second Run Output:
Enter 1st no 10Enter 2nd no 36Enter the operator (+,-,*,/)
–Difference = 26>>>
Program: 5 Write a python program to take input for a number and print its table?
num=int(input("Enter any no "))
i=1
while(i<=10):
table=num*I
print(num," * ",i," = ",table)
i=i+1
Output:
Enter any no 55 * 1 = 55 * 2 = 105 * 3 = 155 * 4 = 205 * 5 = 255 * 6 =
305 * 7 = 355 * 8 = 405 * 9 = 455 * 10 = 50>>>
Program:6
Write a python program to take input for a number and print its factorial?
n=int(input("Enter any no "))
i=1
f=1
while(i<=n):
f=f*i
i=i+1
print("Factorial = ",f)
Output:
Enter any no 5Factorial = 120>>>
Program:7
Write a python program to take input for a number check if the entered number is
Armstrong or not.
n=int(input("Enter the number to check : "))
n1=n
s=0
while(n>0):
d=n%10
s=s + (d *d * d)
n=int(n/10)
if s==n1:
print("Armstrong Number")
else:
print("Not an Armstrong Number")
First Run Output:
Enter the number to check : 153Armstrong Number>>>
Second Run Output:
Enter the number to check : 152Not an Armstrong Number>>>
Program:8
Write a python program to take input for a number and print its factorial using
recursion?
#Factorial of a number using recursion
def recur_factorial(n):
if n == 1:
return n
else:
return n*recur_factorial(n-1)
#for fixed number
num = 7
#using user input
num=int(input("Enter any no "))
#check if the number is negative
if num < 0:
print("Sorry, factorial does not exist for negative
numbers")
elif num == 0:
print("The factorial of 0 is 1")
else:
print("The factorial of", num, "is",
recur_factorial(num))
Output:
Enter any no 5The factorial of 5 is 120>>>
Program:9
Write a python program to Display Fibonacci Sequence Using Recursion?
#Python program to display the Fibonacci sequence
def recur_fibo(n):
if n <= 1:
return n
else:
return(recur_fibo(n-1) + recur_fibo(n-2))
nterms = int(input("Enter upto which term you want to
print"))
#check if the number of terms is valid
if (nterms <= 0):
print("Plese enter a positive integer")
else:
print("Fibonacci sequence:")
for i in range(nterms):
print(recur_fibo(i))
Output:
Fibonacci sequence:0112358132134>>>
Program: 10
Write a python program to maintain book details like book code, book title and price
using stacks data structures? (implement push(), pop() and traverse() functions)
"""
push
pop
traverse
"""
book=[]
def push():
bcode=input("Enter bcode ")
btitle=input("Enter btitle ")
price=input("Enter price ")
bk=(bcode,btitle,price)
book.append(bk)
def pop():
if(book==[]):
print("Underflow / Book Stack in empty")
else:
bcode,btitle,price=book.pop()
print("poped element is ")
print("bcode ",bcode," btitle ",btitle," price ",price)
def traverse():
if not (book==[]):
n=len(book)
for i in range(n-1,-1,-1):
print(book[i])
else:
print("Empty , No book to display")
while True:
print("1. Push")
print("2. Pop")
print("3. Traversal")
print("4. Exit")
ch=int(input("Enter your choice "))
if(ch==1):
push()
elif(ch==2):
pop()
elif(ch==3):
traverse()
elif(ch==4):
print("End")
break
else:
print("Invalid choice")
Output:
1. Push2. Pop3. Traversal4. Exit
Enter your choice 1
Enter bcode 101
Enter btitle python
Enter price 254
1. Push2. Pop3. Traversal4. ExitEnter your choice 3
(‘101’, ‘python’, ‘254’)
1. Push2. Pop3. Traversal4. ExitEnter your choice
Program:11
Write a python program to maintain employee details like empno,name and salary
using Queues data structure? (implement insert(), delete() and traverse() functions)
#queue implementation (using functions)
#program to create a queue of employee(empno,name,sal).
"""
add employee
delete employee
traverse / display all employees
"""
employee=[]
def add_element():
empno=input("Enter empno ")
name=input("Enter name ")
sal=input("Enter sal ")
emp=(empno,name,sal)
employee.append(emp)
def del_element():
if(employee==[]):
print("Underflow / Employee Stack in empty")
else:
empno,name,sal=employee.pop(0)
print("poped element is ")
print("empno ",empno," name ",name," salary ",sal)
def traverse():
if not (employee==[]):
n=len(employee)
for i in range(0,n):
print(employee[i])
else:
print("Empty , No employee to display")
while True:
print("1. Add employee")
print("2. Delete employee")
print("3. Traversal")
print("4. Exit")
ch=int(input("Enter your choice "))
if(ch==1):
add_element()
elif(ch==2):
del_element();
elif(ch==3):
traverse()
elif(ch==4):
print("End")
break
else:
print("Invalid choice")
Output:
1. Add employee2. Delete employee3. Traversal4. Exit
Enter your choice 1Enter empno 101Enter name AmitEnter sal
45000
1. Add employee2. Delete employee3. Traversal4. ExitEnter
your choice 3(‘101’, ‘Amit’, ‘45000’)
1. Add employee2. Delete employee3. Traversal4. ExitEnter
your choice
Program:12
Write a python program to read a file named “article.txt”, count and print total
alphabets in the file?
def count_alpha():
lo=0
with open("article.txt") as f:
while True:
c=f.read(1)
if not c:
break
print(c)
if((c>='A' and c<='Z') or (c>='a' and c<='z')):
lo=lo+1
print("total lower case alphabets ",lo)
#function calling
count_alpha()
Output:
Hello how are you12123byetotal lower case alphabets 17>>>
Program:13
Write a python program to read a file named “article.txt”, count and print the
following:
(i) length of the file(total characters in file)
(ii)total alphabets
(iii) total upper case alphabets
(iv) total lower case alphabets
(v) total digits
(vi) total spaces
(vii) total special characters
def count():
a=0
ua=0
la=0
d=0
sp=0
spl=0
with open("article.txt") as f:
while True:
c=f.read(1)
if not c:
break
print(c)
if((c>='A' and c<='Z') or (c>='a' and c<='z')):
a=a+1
if(c>='A' and c<='Z'):
ua=ua+1
else:
la=la+1
if(c>='0' and c<='9'):
d=d+1
if(c==''):
sp=sp+1
else:
spl=spl+1
print("total alphabets ",a)
print("total upper case alphabets ",ua)
print("total lower case alphabets ",la)
print("total digits ",d)
print("total spaces ",sp)
print("total special characters ",spl)
# function calling
count()
Output:
Welcome to cbsepython.
('total alphabets ', 19)
('total upper case alphabets ', 1)
('total lower case alphabets ', 21)
('total digits ', 0)
('total spaces ', 0)
('total special characters ', 22)
>>>
Program: 14
Write a python program to read a file named “article.txt”, count and print total
words starting with “a” or “A” in the file?
def count_words():
w=0
with open("article.txt") as f:
for line in f:
for word in line.split():
if(word[0]=="a" or word[0]=="A"):
print(word)
w=w+1
print("total words starting with 'a' are ",w)
# function calling
count_words()
Output:
Amit
Ankur
and
Ajay
("total words starting with 'a' are ", 4)
>>>>
computer science practical file for class 12 python 2021-22
Program: 15
Write a python program to read a file named “article.txt”, count and print total
lines starting with vowels in the file?
filepath = 'article.txt'
vowels="AEIOUaeiou"
with open(filepath) as fp:
line = fp.readline()
cnt = 1
while line:
if(line[0] in vowels):
#print(line)
print("Line {}: {}".format(cnt, line.strip()))
cnt=cnt+1
line = fp.readline()
Output:
Line 1: amitLine 2: owlLine 3: Eat apple a day and stay
healthyLine 4: Anmol
Program:16
Python interface with MySQL
Write a function to insert a record in table using python and MySQL
interface.
def insert_data():
#take input for the details and then save the record in
the databse
#to insert data into the existing table in an existing
database
import mysql.connector
db =
mysql.connector.connect(host="localhost",user="root",
password="admin")
c = db.cursor()
r=int(input("Enter roll no "))
n=input("Enter name ")
p=int(input("Enter per "))
try:
c.execute("insert into student (roll,name,per) values
(%s,%s,%s)",(r,n,p))
db.commit()
print("Record saved")
except:
db.rollback()
db.close()
# function calling
insert_data()
Output:
Enter roll no 101Enter name amitEnter per 97Record saved>>>
Program 17:
Python interface with MySQL
Write a function to display all the records stored in a table using
python and MySQL interface.
def display_all():
import mysql.connector
db =
mysql.connector.connect(host='localhost',user='root',
passwd='admin',database='test4')
try:
c = db.cursor()
sql='select * from student;'
c.execute(sql)
countrow=c.execute(sql)
print("number of rows : ",countrow)
data=c.fetchall()
print("=========================")
print("Roll No Name Per ")
print("=========================")
for eachrow in data:
r=eachrow[0]
n=eachrow[1]
p=eachrow[2]
print(r,' ',n,' ',p)
print("=========================")
except:
db.rollback()
db.close()
# function calling
display_all()
Output:
number of rows : 2=========================Roll No
Name Per=========================102 aaa 99101 amit
97=========================>>>
Program :18
Python interface with MySQL
Write a function to search a record stored in a table using
python and MySQL interface.
def search_roll():
import mysql.connector
db =
mysql.connector.connect(host="localhost",user="root",
passwd="admin",database="test")
try:
z=0
roll=int(input("Enter roll no to search "))
c = db.cursor()
sql='select * from student;'
c.execute(sql)
countrow=c.execute(sql)
print("number of rows : ",countrow)
data=c.fetchall()
for eachrow in data:
r=eachrow[0]
n=eachrow[1]
p=eachrow[2]
if(r==roll):
z=1
print(r,n,p)
if(z==0):
print("Record is not present")
except:
db.rollback()
db.close()
# function calling
search_roll()
Output:
Enter roll no to search 101number of rows : 2101 amit 97>>>
