TSV991, TSV992, TSV994

TSV991A, TSV992A, TSV994A

Datasheet

High bandwidth (20 MHz for gain ≥ 4) micro-power (820 µA) rail-to-rail 5 V
op amps

Features
• Low input offset voltage: 1.5 mV max. (A grade)
• Rail-to-rail input and output
• Wide bandwidth 20 MHz
• Stable for gain ≥ 4 or ≤ -3
• Low power consumption: 820 µA typ.
• High output current: 35 mA
• Operating from 2.5 V to 5.5 V
• Low input bias current, 1 pA typ.
• ESD internal protection ≥ 5 kV

Applications
• Battery-powered applications
• Portable devices
• Signal conditioning and active filtering
• Medical instrumentation
• Automotive applications

Maturity status link

Description
TSV991, TSV992, TSV994, TSV991A,
TSV992A, TSV994A
The TSV99x and TSV99xA family of single, dual, and quad operational amplifiers
offers low voltage operation and rail-to-rail input and output. These devices feature
an excellent speed/power consumption ratio, offering a 20 MHz gain-bandwidth,
Related products
stable for gains above 4 (100 pF capacitive load), while consuming only 1.1 mA
See TSV771,
For 20 MHz maximum at 5 V. They also feature an ultra-low input bias current. These
unity-gain stable characteristics make the TSV99x family ideal for sensor interfaces, battery-supplied
TSV772
amplifiers and portable applications, as well as active filtering. These characteristics make the
See TSV911, TSV99x, TSV99xA family ideal for sensor interfaces, battery-supplied and portable
For 8 MHz
TSV912, TSV914, applications, as well as active filtering.
unity-gain stable
TSV911A, TSV912A,
amplifiers
TSV914A

DS4975 - Rev 16 - March 2023 www.st.com

For further information contact your local STMicroelectronics sales office.
 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Package pin connections

1 Package pin connections

Figure 1. Pin connection (top view)

SOT23-5 SO8 (single)

NC 1 8 NC

In1- 2 - 7 VCC+

In1+ 3 + 6 Out

VCC- 4 5 NC

DFN6 1.3x1.6x0.55 MiniSO8, SO8, DFN8 2x2

IN- 1 6 VCC+

IN+ 2 5 VCC-

NC 3 4 OUT

SO14, TSSOP14
DFN8 2x2

DS4975 - Rev 16 page 2/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Absolute maximum ratings and operating conditions

2 Absolute maximum ratings and operating conditions

Table 1. Absolute maximum ratings (AMR)

Symbol Parameter Value Unit

VCC Supply voltage (1) 6

Vid Differential input voltage (2) ±VCC

V
(VCC-) - 0.2 to (VCC+) +
Vin Input voltage (3)
0.2
Iin Input current (4) 10 mA

Tstg Storage temperature -65 to 150

°C
Tj Maximum junction temperature 150

DFN8 2x2 57
DFN6
230
1.3x1.6x0.55
SOT23-5 250
Rthja Thermal resistance junction to ambient (5) (6)
SO8 125
MiniSO8 190
SO14 103 °C/W
TSSOP14 100
SOT23-5 81
SO8 40
Rthjc Thermal resistance junction to case MiniSO8 39
SO14 31
TSSOP14 32

HBM: human body model (7) 5 kV

MM: machine model (8) 400

SOT23-5,
SO8,
1500
MiniSO8,
ESD DFN8 2x2
V
CDM: charged device model (9) DFN6
1500
1.3x1.6x0.55
TSSOP14 750
SO14 500
Latch-up immunity 200 mA

1. Value is with respect to the VCC- pin.

2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. VCC - VIN must not exceed 6 V.
4. Input current must be limited by a resistor in series with the inputs.
5. Short-circuits can cause excessive heating and destructive dissipation.
6. Rth are typical values.
7. Human body model: 100 pF discharged through a 1.5 kΩ resistor between two pins of the device, done for all couples of pin
combinations with other pins floating.
8. Machine model: 200 pF charged to the specified voltage, then discharged directly between two pins of the device with no
external series resistor (internal resistor < 5 Ω), done for all couples of pin combinations with other pins floating.
9. Charged device model: all pins plus packages are charged together to the specified voltage and then discharged directly to
the ground.

DS4975 - Rev 16 page 3/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Absolute maximum ratings and operating conditions

Table 2. Operating conditions

Symbol Parameter Value Unit

VCC Supply voltage 2.5 to 5.5

V
Vicm Common mode input voltage range (VCC-) - 0.1 to (VCC+) + 0.1

Top Operating free air temperature range -40 to 125 °C

DS4975 - Rev 16 page 4/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics

3 Electrical characteristics

Note: In the electrical characteristic tables below, all parameter limits at temperatures other than 25 °C are guaranteed
by correlation.

Table 3. Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)

Symbol Parameter Conditions Min. Typ. Max. Unit

DC performance
Top = 25 °C 0.1 4.5
Offset voltage, TSV99x
Tmin < Top < Tmax 7.5
Vio mV
Top = 25 °C 1.5
Offset voltage, TSV99xA
Tmin < Top < Tmax 3

∆Vio/∆T Input offset voltage drift 2 μV/°C

Input offset current, Vout = VCC/2 Top = 25 °C 1 10

Iio (1)
Tmin < Top < Tmax 100
pA
Input bias current, Vout = VCC/2 Top = 25 °C 1 10
Iib (1)
Tmin < Top < Tmax 100

Common mode rejection ratio, 0 V to 2.5 V, Vout = 1.25 V, Top = 25 °C 58 75

CMR
20 log (ΔVic/ΔVio) Tmin < Top < Tmax 53

RL = 10 kΩ, Vout = 0.5 V to 2 V, dB

80 89
Avd Large signal voltage gain Top = 25 °C

Tmin < Top < Tmax 75

RL = 10 kΩ, Tmin < Top < Tmax 15 40

VCC - VOH High-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150
mV
RL = 10 kΩ, Tmin < Top < Tmax 15 40
VOL Low-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150

Vo = 2.5 V, Top = 25 °C 18 32
Isink
Tmin < Top < Tmax 16
Iout
Vo = 0 V, Top = 25 °C 18 35 mA
Isource
Tmin < Top < Tmax 16

ICC Supply current (per channel) No load, Vout = VCC/2, Tmin < Top < Tmax 0.78 1.1

AC performance
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
GBP Gain bandwidth product 20 MHz
Top = 25 °C

Phase margin = 45 °, Rf = 10 kΩ,

Gain Minimum gain for stability RL = 2 kΩ, CL = 100 pF, Top = 25 °C, 4 V/V
positive gain configuration
Phase margin = 45 °, Rf = 10 kΩ,
Gain Minimum gain for stability RL = 2 kΩ, CL = 100 pF, Top = 25 °C, -3 V/V
negative gain configuration

SR Slew rate RL = 2 kΩ, CL = 100 pF, Top = 25 °C 10 V/μs

DS4975 - Rev 16 page 5/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics

Symbol Parameter Conditions Min. Typ. Max. Unit

en Equivalent input noise voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz

G = -3, f = 1 kHz, RL = 2 kΩ, Bw =

THD+N Total harmonic distortion 22 kHz, Vicm = VCC/2, Vout = 2 Vpp, 0.0025 %
Top=25 °C

1. Guaranteed by design.

DS4975 - Rev 16 page 6/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics

Table 4. Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)

Symbol Parameter Conditions Min. Typ. Max. Unit

DC performance
Top = 25 °C 0.1 4.5
Offset voltage, TSV99x
Tmin < Top < Tmax 7.5
Vio mV
Top = 25 °C 1.5
Offset voltage, TSV99xA
Tmin < Top < Tmax 3

∆Vio/∆T Input offset voltage drift 2 μV/°C

Input offset current, Vout = VCC/2 Top = 25 °C 1 10

Iio (1)
Tmin < Top < Tmax 100
pA
Input bias current, Vout = VCC/2 Top = 25 °C 1 10
Iib (1)
Tmin < Top < Tmax 100

Common mode rejection ratio, 0 V to 3.3 V, Vout = 1.65 V, Top = 25 °C 60 78

CMR
20 log (ΔVic/ΔVio) Tmin < Top < Tmax 55

RL = 10 kΩ, Vout = 0.5 V to 2.8 V, dB

80 89
Avd Large signal voltage gain Top = 25 °C

Tmin < Top < Tmax 75

RL = 10 kΩ, Tmin < Top < Tmax 15 40

VCC - VOH High-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150
mV
RL = 10 kΩ, Tmin < Top < Tmax 15 40
VOL Low-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150

Vo = 3.3 V, Top = 25 °C 18 32
Isink
Tmin < Top < Tmax 16
Iout
Vo = 0 V, Top = 25 °C 18 35 mA
Isource
Tmin < Top < Tmax 16

ICC Supply current (per channel) No load, Vout = VCC/2, Tmin < Top < Tmax 0.8 1.1

AC performance
RL = 2 kΩ, CL = 100 pF, f = 100 kHz, Top
GBP Gain bandwidth product 20 MHz
= 25 °C
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C, 4
positive gain configuration
Gain Minimum gain for stability V/V
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top = 25 °C, -3
negative gain configuration
RL = 2 kΩ, CL = 100 pF, f = 100 kHz, Top
SR Slew rate 10 V/μs
= 25 °C
en Equivalent input noise voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz

G = -3, f = 1 kHz, RL = 2 kΩ, Bw = 22

THD+N Total harmonic distortion kHz, Vicm = VCC/2, Vout = 2.8 Vpp, 0.0018 %
Top = 25 °C

1. Guaranteed by design.

DS4975 - Rev 16 page 7/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics

Table 5. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified)

Symbol Parameter Conditions Min. Typ. Max. Unit

DC performance
Top = 25 °C 0.1 4.5
Offset voltage, TSV99x
Tmin < Top < Tmax 7.5
Vio mV
Top = 25 °C 1.5
Offset voltage, TSV99xA
Tmin < Top < Tmax 3

∆Vio/∆T Input offset voltage drift 2 μV/°C

Input offset current, Vout = VCC/2 Top = 25 °C 1 10

Iio (1)
Tmin < Top < Tmax 100
pA
Input bias current, Vout = VCC/2 Top = 25 °C 1 10
Iib (1)
Tmin < Top < Tmax 100

0 V to 5 V, Vout = 2.5 V,
Common mode rejection ratio, 62 82
CMR Top = 25 °C
20 log (ΔVic/ΔVio)
Tmin < Top < Tmax 57

Supply voltage rejection ratio, 20

SVR VCC = 2.5 V to 5 V 70 86 dB
log (ΔVcc/ΔVio)

RL = 10 kΩ, Vout = 0.5 V to 4.5 V,

80 91
Avd Large signal voltage gain Top = 25 °C

Tmin < Top < Tmax 75

RL = 10 kΩ, Tmin < Top < Tmax 15 40

VCC - VOH High-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150
mV
RL = 10 kΩ, Tmin < Top < Tmax 15 40
VOL Low-level output voltage
RL = 600 Ω, Tmin < Top < Tmax 45 150

Vo = 5 V, Top = 25 °C 18 32
Isink
Tmin < Top < Tmax 16
Iout
Vo = 0 V, Top = 25 °C 18 35 mA
Isource
Tmin < Top < Tmax 16

ICC Supply current (per channel) No load, Vout = 2.5 V, Tmin < Top < Tmax 0.82 1.1

AC performance
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
GBP Gain bandwidth product 20 MHz
Top = 25 °C

Phase margin = 45 °, Rf = 10 kΩ,

RL = 2 kΩ, CL = 100 pF, Top = 25 °C, 4
positive gain configuration
Gain Minimum gain for stability V/V
Phase margin = 45 °, Rf = 10 kΩ,
RL = 2 kΩ, CL = 100 pF, Top=25 °C, -3
negative gain configuration
RL = 2 kΩ, CL = 100 pF, f = 100 kHz,
SR Slew rate 10 V/μs
Top = 25 °C

en Equivalent input noise voltage f = 10 kHz, Top = 25 °C 21 nV/√Hz

DS4975 - Rev 16 page 8/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristics

Symbol Parameter Conditions Min. Typ. Max. Unit

G = -3, f = 1 kHz, RL = 2 kΩ, Bw = 22

THD+N Total harmonic distortion kHz, Vicm = VCC/2, Vout = 4.4 Vpp, 0.0014 %
Top = 25 °C

1. Guaranteed by design.

DS4975 - Rev 16 page 9/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves

4 Electrical characteristic curves

Figure 2. Input offset voltage distribution at T = 25 °C Figure 3. Input offset voltage distribution at T = 125 °C

40
140
Vcc= 5V
Vicm =2.5V
120 Ta mb =25 °C °
30
100
Quantity of parts

Quantity of parts
80
20
60

40
10

20

0 0
-5 -4 -3 -2 -1 0 1 2 3 4 5 -5 -4 -3 -2 -1 0 1 2 3 4 5
Input o ffs et Vo ltag e (mV) Input o ffs et Vo ltag e (mV)

Figure 4. Supply current vs. input common-mode voltage Figure 5. Supply current vs. input common-mode voltage
at VCC = 2.5 V at VCC = 5 V

Figure 6. Output current vs. output voltage at VCC = 2.5 V Figure 7. Output current vs. output voltage at VCC = 5 V

DS4975 - Rev 16 page 10/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves

Figure 8. Voltage gain and phase vs. frequency at VCC = 5 Figure 9. Voltage gain and phase vs. frequency at VCC = 5
V and Vicm = 0.5 V V and Vicm = 2.5 V

Phase (°)

Phase (°)
Figure 10. Positive slew rate Figure 11. Negative slew rate

Vin : from 0.5V to Vcc- 0.5V

S R : ca lculat ed from 10% to 90% Vin : from 0.5V to Vcc- 0.5V
S R : ca lculat ed from 10 % to 90 %

Figure 12. Distortion + noise vs. frequency Figure 13. Distortion + noise vs. output voltage

DS4975 - Rev 16 page 11/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Electrical characteristic curves

Figure 14. Noise vs. frequency Figure 15. Supply current vs. supply voltage

DS4975 - Rev 16 page 12/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Application information

5 Application information

5.1 Driving resistive and capacitive loads

These products are low-voltage, low-power operational amplifiers optimized to drive rather large resistive loads
above 2 kΩ.
The TSV99x products are not unity gain stable. To ensure proper stability they must be used in a gain
configuration, with a minimum gain of -3 or 4.
However, they can be used in a “follower“ configuration by adding a small, in-series resistor at the output, which
drastically improves the stability of the device (Figure 16 shows the recommended in-series resistor values).
Once the in-series resistor value has been selected, the stability of the circuit should be tested on the bench and
simulated with the simulation model.
Another way to improve stability and reduce peaking is to add a capacitor in parallel with the feedback resistor. As
shown in Figure 17, the feedback capacitor drastically reduces the peaking versus capacitive load (inverting gain
configuration, gain = -2).

Figure 16. In-series resistor vs. capacitive load when Figure 17. Peaking versus capacitive load, with or without
TSV99x is used in follower configuration feedback capacitor in inverting gain configuration

5.2 PCB layouts

For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible to the power supply
pins.

5.3 Macromodel
An accurate macromodel of the TSV99x is available on STMicroelectronics’ web site at www.st.com. This model
is a trade-off between accuracy and complexity (that is, time simulation) of the TSV99x operational amplifiers. It
emulates the nominal performance of a typical device within the specified operating conditions mentioned in the
datasheet. It helps to validate a design approach and to select the right operational amplifier, however, it does not
replace on-board measurements.

DS4975 - Rev 16 page 13/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Package information

6 Package information

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.

DS4975 - Rev 16 page 14/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SOT23-5 package information

6.1 SOT23-5 package information

Figure 18. SOT23-5 package outline

Table 6. SOT23-5 mechanical data

Dimensions

Ref. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 0.90 1.20 1.45 0.035 0.047 0.057

A1 0.15 0.006
A2 0.90 1.05 1.30 0.035 0.041 0.051
B 0.35 0.40 0.50 0.014 0.016 0.020
C 0.09 0.15 0.20 0.004 0.006 0.008
D 2.80 2.90 3.00 0.110 0.114 0.118
D1 1.90 0.075
e 0.95 0.037
E 2.60 2.80 3.00 0.102 0.110 0.118
F 1.50 1.60 1.75 0.059 0.063 0.069
L 0.10 0.35 0.60 0.004 0.014 0.024
K 0 degrees 10 degrees 0 degrees 10 degrees

DS4975 - Rev 16 page 15/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN8 2 x 2 package information

6.2 DFN8 2 x 2 package information

Figure 19. DFN8 2 x 2 package outline

Table 7. DFN8 2 x 2 mechanical data

Dimensions

Ref. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 0.51 0.55 0.60 0.020 0.022 0.024

A1 0.05 0.002
A3 0.15 0.006
b 0.18 0.25 0.30 0.007 0.010 0.012
D 1.85 2.00 2.15 0.073 0.079 0.085
D2 1.45 1.60 1.70 0.057 0.063 0.067
E 1.85 2.00 2.15 0.073 0.079 0.085
E2 0.75 0.90 1.00 0.030 0.035 0.039
e 0.50 0.020
L 0.425 0.017
ddd 0.08 0.003

DS4975 - Rev 16 page 16/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN8 2 x 2 package information

Figure 20. DFN8 2 x 2 recommended footprint

Note: The exposed pad of the DFN8 2x2 package is not internally connected. It can be set to VCC- or left floating.

DS4975 - Rev 16 page 17/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN6 1.3 x 1.6 x 0.55 package information

6.3 DFN6 1.3 x 1.6 x 0.55 package information

Figure 21. DFN6 1.3 x 1.6 x 0.55 package outline

DS4975 - Rev 16 page 18/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
DFN6 1.3 x 1.6 x 0.55 package information

Table 8. DFN6 1.3 x 1.6 x 0.55 mechanical data

Dimensions

Ref. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 0.50 0.55 0.60 0.020 0.022 0.024

A1 0.00 0.02 0.05 0.000 0.001 0.002
A3 0.15 0.006
B 0.15 0.20 0.25 0.006 0.008 0.010
D 1.30 0.051
E 1.60 0.063
e 0.40 0.016
L 0.453 0.553 0.653 0.018 0.022 0.026
N 6 0.236
aaa 0.05 0.002
bbb 0.07 0.003
ccc 0.10 0.004
ddd 0.05 0.002
eee 0.08 0.003

Figure 22. DFN6 1.3 x 1.6 x 0.55 recommended footprint

DS4975 - Rev 16 page 19/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
MiniSO8 package information

6.4 MiniSO8 package information

Figure 23. MiniSO8 package outline

Table 9. MiniSO8 package mechanical data

Dimensions

Ref. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 1.1 0.043
A1 0 0.15 0 0.0006
A2 0.75 0.85 0.95 0.030 0.033 0.037
b 0.22 0.40 0.009 0.016
c 0.08 0.23 0.003 0.009
D 2.80 3.00 3.20 0.11 0.118 0.126
E 4.65 4.90 5.15 0.183 0.193 0.203
E1 2.80 3.00 3.10 0.11 0.118 0.122
e 0.65 0.026
L 0.40 0.60 0.80 0.016 0.024 0.031
L1 0.95 0.037
L2 0.25 0.010
k 0° 8° 0° 8°
ccc 0.10 0.004

DS4975 - Rev 16 page 20/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SO8 package information

6.5 SO8 package information

Figure 24. SO8 package outline

Table 10. SO8 package mechanical data

Dimensions

Ref. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 1.75 0.069
A1 0.10 0.25 0.004 0.010
A2 1.25 0.049
b 0.28 0.48 0.011 0.019
c 0.17 0.23 0.007 0.010
D 4.80 4.90 5.00 0.189 0.193 0.197
E 5.80 6.00 6.20 0.228 0.236 0.244
E1 3.80 3.90 4.00 0.150 0.154 0.157
e 1.27 0.050
h 0.25 0.50 0.010 0.020
L 0.40 1.27 0.016 0.050
L1 1.04 0.040
k 0° 8° 0° 8°
ccc 0.10 0.004

DS4975 - Rev 16 page 21/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SO-14 package information

6.6 SO-14 package information

Figure 25. SO-14 package outline

DS4975 - Rev 16 page 22/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
SO-14 package information

Table 11. SO-14 package mechanical data

Dimensions

Dim. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 1.75 0.069
A1 0.10 0.225 0.004 0.009
A2 1.30 1.40 1.50 0.051 0.055 0.059
A3 0.60 0.65 0.70 0.024 0.026 0.028
b 0.39 0.47 0.015 0.019
b1 0.38 0.41 0.44 0.015 0.016 0.017
c 0.20 0.24 0.008 0.009
c1 0.19 0.20 0.21 0.0075 0.0079 0.0083
D 8.55 8.65 8.75 0.337 0.341 0.344
E 5.80 6.00 6.20 0.228 0.236 0.244
E1 3.80 3.90 4.00 0.150 0.154 0.157
e 1.27 BSC 0.050 BSC
h 0.25 0.50 0.010 0.020
L 0.50 0.80 0.020 0.031
L1 1.05 REF 0.041 REF
θ 8° (max)

Figure 26. SO-14 recommended footprint

DS4975 - Rev 16 page 23/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
TSSOP-14 package information

6.7 TSSOP-14 package information

Figure 27. TSSOP-14 package outline

DS4975 - Rev 16 page 24/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
TSSOP-14 package information

Table 12. TSSOP-14 package mechanical data

Dimension

Dim. Millimeters Inches

Min. Typ. Max. Min. Typ. Max.

A 1.20 0.047
A1 0.05 0.15 0.002 0.006
A2 0.80 1.00 1.05 0.031 0.039 0.041
b 0.19 0.30 0.007 0.012
c 0.09 0.20 0.004 0.008
D 4.90 5.00 5.10 0.193 0.197 0.201
E 6.20 6.40 6.60 0.244 0.252 0.260
E1 4.30 4.40 4.50 0.169 0.173 0.177
e 0.65 BSC 0.25 BSC
L 0.45 0.60 0.75 0.018 0.024 0.030
L1 1.00 0.039
k 8° (max)
aaa 0.10 0.004

Figure 28. TSSOP-14 recommended footprint

6.80
4.40
0.40

4.30

0.65

1.20

DS4975 - Rev 16 page 25/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Ordering information

7 Ordering information

Table 13. Order code

Order code Temperature range Package Packing Marking

TSV991ILT K130
SOT23-5
TSV991AILT K129
TSV991IQ2T K1F
DFN8 2x2
TSV991AIQ2T K1E
TSV991AIQ1T DFN6 1.3x1.6x0.55 K5
TSV992IST K132
MiniSO8
TSV992AIST K135
-40 °C to 125 °C
TSV992IDT V992I
SO8
TSV992AIDT V992AI
TSV992IQ2T DFN8 2x2 K38
TSV994IPT V994I
TSSOP14
TSV994AIPT V994AI
TSV994IDT V994I
SO14 Tape and reel
TSV994AIDT V994AI
TSV991IYLT K149
SOT23-5
TSV991AIYLT K150
TSV991IYDT V991IY
TSV991AIYDT V991AY
SO8
TSV992IYDT V992IY
TSV992AIYDT -40 °C to 125 °C V992AY
TSV992IYST automotive grade (1) K149
MiniSO8
TSV992AIYST K150
TSV994IYDT V994IY
SO14
TSV994AIYDT V994AIY
TSV994IYPT V994IY
TSSOP14
TSV994AIYPT V994AY

1. Qualified and characterized according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 &
Q 002 or equivalent.

Note: In the table above, all packages except the SO14 are "moisture sensitivity level 1" as per JEDEC J-STD-020-C.
SO14 is JEDEC level 3.

DS4975 - Rev 16 page 26/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A

Revision history
Table 14. Document revision history

Date Revision Changes

Table 13: "Order codes": added new commercial product TSV991AIQ2T; corrected “Marking” error for
10-Mar-2014 10
TSV991IQ2T from K1E to K1F.
Added DFN6 1.3 x 1.6 x 0.55 package for new order code TSV991AIQ1T.
12-Jun-2015 11 Updated "L" dimension of Section 4: "DFN8 2 x 2 mm (NB) package information".
Updated min "k" value of Section 4.5: "SO8 package information".
Table 3, Table 4, and Table 5: modified that RL = 600 Ω (not 600 kΩ) for the high-level and low-level
output voltage parameters.
27-Nov-2015 12 Section 5.2: updated name of package and titles of drawings and table; added note about exposed
pad.
Section 5.3: updated name of package.
03-Apr-2018 13 Updated cover image and Table 13. Order code.
19-Jun-2019 14 Updated the related product table in cover page.
Updated figure on the cover page.
14-Sep-2022 15
Added TSV991IYDT and TSV991AIYDT new order codes in Table 13. Order code.
Updated title, figure and related products on the cover page.
14-Mar-2023 16
Added ESD value for DFN6 in Table 1 and new Section 1 Package pin connections.

DS4975 - Rev 16 page 27/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
Contents

Contents
1 Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
2 Absolute maximum ratings and operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
3 Electrical characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4 Electrical characteristic curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
5 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
5.1 Driving resistive and capacitive loads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.2 PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.3 Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
6.1 SOT23-5 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.2 DFN8 2 x 2 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
6.3 DFN6 1.3 x 1.6 x 0.55 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
6.4 MiniSO8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
6.5 SO8 package information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
6.6 SO-14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.7 TSSOP-14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
7 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

DS4975 - Rev 16 page 28/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
List of tables

List of tables
Table 1. Absolute maximum ratings (AMR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Table 2. Operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Table 3. Electrical characteristics at VCC+ = 2.5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Table 4. Electrical characteristics at VCC+ = 3.3 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Table 5. Electrical characteristics at VCC+ = 5 V, VCC- = 0 V, Vicm = VCC/2, with RL connected to VCC/2, full temperature
range (unless otherwise specified) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Table 6. SOT23-5 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Table 7. DFN8 2 x 2 mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Table 8. DFN6 1.3 x 1.6 x 0.55 mechanical data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Table 9. MiniSO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Table 10. SO8 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Table 11. SO-14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Table 12. TSSOP-14 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Table 13. Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Table 14. Document revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

DS4975 - Rev 16 page 29/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A
List of figures

List of figures
Figure 1. Pin connection (top view) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Figure 2. Input offset voltage distribution at T = 25 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 3. Input offset voltage distribution at T = 125 °C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 4. Supply current vs. input common-mode voltage at VCC = 2.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 5. Supply current vs. input common-mode voltage at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 6. Output current vs. output voltage at VCC = 2.5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 7. Output current vs. output voltage at VCC = 5 V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Figure 8. Voltage gain and phase vs. frequency at VCC = 5 V and Vicm = 0.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 9. Voltage gain and phase vs. frequency at VCC = 5 V and Vicm = 2.5 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 10. Positive slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 11. Negative slew rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 12. Distortion + noise vs. frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 13. Distortion + noise vs. output voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Figure 14. Noise vs. frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 15. Supply current vs. supply voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Figure 16. In-series resistor vs. capacitive load when TSV99x is used in follower configuration . . . . . . . . . . . . . . . . . . . 13
Figure 17. Peaking versus capacitive load, with or without feedback capacitor in inverting gain configuration . . . . . . . . . . 13
Figure 18. SOT23-5 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Figure 19. DFN8 2 x 2 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Figure 20. DFN8 2 x 2 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Figure 21. DFN6 1.3 x 1.6 x 0.55 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Figure 22. DFN6 1.3 x 1.6 x 0.55 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 23. MiniSO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 24. SO8 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 25. SO-14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Figure 26. SO-14 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Figure 27. TSSOP-14 package outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Figure 28. TSSOP-14 recommended footprint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

DS4975 - Rev 16 page 30/31

 TSV991, TSV992, TSV994, TSV991A, TSV992A, TSV994A

IMPORTANT NOTICE – READ CAREFULLY

STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgment.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, refer to www.st.com/trademarks. All other product or service names
are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2023 STMicroelectronics – All rights reserved

DS4975 - Rev 16 page 31/31