Scribd
Upload
55 views1 page

DG M TNC275FM

The DEHNguard® modular DG M TNC 275 FM is a surge protection device designed for TN-C systems, featuring high discharge capacity and reliability through advanced monitoring. It has a nominal voltage of 230/400 V, a maximum discharge current of 40 kA, and operates within a temperature range of -40°C to +80°C. The device is suitable for indoor installation and complies with various international standards, including KEMA, VDE, and UL.

Uploaded by

tt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views1 page

DG M TNC275FM

The DEHNguard® modular DG M TNC 275 FM is a surge protection device designed for TN-C systems, featuring high discharge capacity and reliability through advanced monitoring. It has a nominal voltage of 230/400 V, a maximum discharge current of 40 kA, and operates within a temperature range of -40°C to +80°C. The device is suitable for indoor installation and complies with various international standards, including KEMA, VDE, and UL.

Uploaded by

tt
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product Data Sheet: DEHNguard® modular

DG M TNC 275 FM (952 305)


■ Prewired complete unit consisting of a base part and plug-in protection modules
■ High discharge capacity due to heavy-duty zinc oxide varistors/spark gaps
■ High reliability due to "Thermo Dynamic Control" SPD monitoring device

Figure without obligation

Basic circuit diagram DG M TNC 275 FM Dimension drawing DG M TNC 275 FM


Modular surge arrester for use in TN-C systems; with floating changeover contact
Type DG M TNC 275 FM
Part No. 952 305
SPD according to EN 61643-11 Type 2
SPD according to IEC 61643-1/-11 Class II
Nominal a.c. voltage (UN) 230/400 V
Max. continuous operating a.c. voltage (UC) 275 V
Nominal discharge current (8/20 µs) (In) 20 kA
Max. discharge current (8/20 µs) (Imax) 40 kA
Voltage protection level (UP) ≤ 1.25 kV
Voltage protection level at 5 kA (UP) ≤ 1 kV
Response time (tA) ≤ 25 ns
Max. mains-side overcurrent protection 125 A gL/gG
Short-circuit withstand capability for max. mains-side overcurrent
protection 50 kArms
Temporary overvoltage (TOV) (UT) 335 V / 5 sec.
TOV characteristic withstand
Operating temperature range (TU) -40°C...+80°C
Operating state/fault indication green / red
Number of ports 1
2
Cross-sectional area (min.) 1.5 mm solid/flexible
2 2
Cross-sectional area (max.) 35 mm stranded/25 mm flexible
For mounting on 35 mm DIN rails acc. to EN 60715
Enclosure material thermoplastic, red, UL 94 V-0
Place of installation indoor installation
Degree of protection IP 20
Capacity 3 module(s), DIN 43880
Approvals KEMA, VDE, UL, VdS
Type of remote signalling contact changeover contact
a.c. switching capacity 250 V/0.5 A
d.c. switching capacity 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A
2
Cross-sectional area for remote signalling terminals max. 1.5 mm solid/flexible
Weight 328 g
Customs tariff number 85363030
GTIN 4013364108448
PU 1 pc(s)

We reserve the right to introduce changes in performance, configuration and technology, dimensions, weights and materials in the course of technical progress. The figures are shown without obligation.

© DEHN + SÖHNE GmbH + Co. KG · Hans-Dehn-Str. 1 · Postfach 1640 · D-92306 Neumarkt · Tel. +499181 906-0 · www.dehn.de

3, te
s ted
: Tested ): New (: Discontinued Model

You might also like