56 RF Touch | Wireless touch unit
• The Wireless touch unit RF Touch is a central controller for heating,
switching electrical appliances and equipment, dimming lights, control-
ling blinds, etc.
• It transmits and receives commands from units and processes set pro-
grams for automatic control.
System units
• Thanks to bidirectional communication, it visualizes the current status of
individual units.
• Automatic control based on weekly program.
• It is possible to combine up to 40 units of iNELS RF Control + 30 Oasis
detectors (you can gradually expand the installation from 1 unit).
• Power to the touch unit is in the range 100–230 V AC, (RF Touch/W also
supplied via adapter 12 V DC included in the supply).
RF Touch- B RF Touch-W • Range up to 100 m (in open space), if the signal is insufficient between
the RF Touch and unit, use the signal repeater RFRP-20 or protocol com-
ponent RFIO2 that support this feature.
• Communication frequency with bidirectional protocol RFIO.
Technical parameters RF Touch-B RF Touch-W
Display Power supply
Type: colour TFT LCD
Resolution: 320 x 240 pixels/262,144 colours RF Touch-B
A2 A1 100–230 V AC
Side proportion: 3:4
Visible surface: 52.5 x 70 mm
Backlighting: active (white LED)
Touch area: resistive 4-conductor
Diagonal: 3.5”
Control: touch
Power supply
Supply voltage: from the back 100–230 V AC,
100–230 V AC from the side 12 V DC
RF Touch-W
Input power: max. 5 W
Power supply terminals: A1–A2
Control
Communication protocol: RFIO2
Frequency: 866–922 MHz (for more information see p. 76)
Range: in open space up to 100 m
A1
100–230 V AC
Min. distance RF Touch A2
Actuator: 1m
Connection
Connection: no-screw push-in terminal
box or jack 2.1 mm jack Adapter, 12 V DC
terminal box connector (adapter is part of the RF Touch-W
unit package)
Cross-section of connecting wires: max. 2.5 mm2/1.5 mm2 with a hollow
Other data
Operating temperature: 0 to +50 °C Colour combinations
Storage temperature: - 20 to +70 °C
Protection: IP20
Overvoltage category: III. Main menu Main menu
Contamination degree: 2 Temperature regulation Temperature regulation
Switching Blinds
Operating position: any
Dimming Quick control
Installation: an installation box anywhere indoor
Blinds
Dimensions: 94 x 94 x 36 mm 94 x 94 x 24 mm Detectors
Weight (plastic): 127 g 175 g Quick control
Related standards: EN 60730-1
black/white chrome/grey
hall light room lamp 1 window kitchen Temperature regulation room lamp 1
kitchen heating 0%
AUTO
Switch on Switch off
Dimming
bedroom heating
Switch on Switch off Up Down ON/OFF
0-10V
100% OK Setting
AUTO
room heating
AUTO
Next functions Next functions Circus
white/pearly glass/grey red/aluminum aluminum/dark grey titanium/ice
RF Touch | Wireless touch unit 57
Window shutter
control
System units
RF Pilot RFJA-32B
Transmitter
communication with RFSA-62B
actuators
20. 01. 2021 15:00
Heating
RFTC-10/G
RFSA-61B
Measures temperature
in the space and sends
the data to RF Touch
DETECTORS
RFSC-61
ra
The detector senses
ng
e4
movement and
00
switches on alarm
m
RFSA-61B up to 200 m
RFDEL-71B
Serves to extend
RFRP-20 the RF signal
range
RFDSC-71
up to 200 m
Command to execute function
Function execution feedback
HEATING SWITCHING
• control of heating devices (boilers, thermo valve 0–10 V...) • this function serves to switch on/off lights, sockets, electrical
• temperature regulation in the entire house or in individual rooms appliances and devices
• information about outdoor temperature (wireless temperature sensor) • intuitive control thanks to customized name options
- terraces • switch clock enabling you to switch appliances in real time, even
• possibility to set your own heating program for the whole week during your absence (simulation of the presence of persons, etc.)
• holiday mode will interrupt the heating program when you are on • switching actuator function selections: switch on/off, impulse relay,
holiday button, delayed ON/OFF (time of delay from 2 s to 60 min)
• room temperature correction (during the heating program)
is performed with a digital thermal regulator command
DIMMING WINDOW SHUTTERS
• the regulation of light intensity • controlling window shutters, sunblinds, blinds, garage door, etc.
• customizable names of individual dimmed circuits (such as “living • window shutters are controlled separately or as a group
room lights“) • setting an independent time schedule for pulling up/down
• “sunrise/sunset” imitation - light gradually goes on or off during • the window shutter receivers are powered by either 230 V or 24 V DC
the preset period between 2 s and 30 min (shutters between windows, etc.)
DETECTORS QUICK CONTROL
• RF Touch communicates with detectors - window, door, movement... • serves to control group of actuators with a single touch
• possible to combine with switching actuators • possibility to set up scenes; on activation, for example, window
• clear control over the entire house shutters are pulled down and lights are adjusted to required intensity
