MAP/MUP ISO Process Pump

End Suction Single Stage Centrifugal Pumps

Main Applications
The MAP/MUP range of foot supported end suction single stage centrifugal pumps is suitable
for demanding industrial applications in several industries such as oil and gas, hydrocarbon
processing, power generation, pulp and paper, general and chemical industry and water to
ensure process reliability, high efficiency and low operating costs. It has been designed in
accordance with ISO 5199 and ISO 2858 international standards and to give the excellent
pumping performance in demanding industrial applications.

Features and Benefits

Versatile range of reliable and efficient impellers Innovative and reliable integrated degassing
and self-priming units
• Reduces life cycle costs, energy consumption,
‌
operation time and downtime • For a variety of applications with difficult liquids
• Designed to help the centrifugal pump start quickly
when the liquid level is below the pump in self-
Balancing holes
priming applications
• Ensure efficient liquid circulation behind the
impeller and in the seal chamber Heavy-duty shaft
• Guarantee optimum shaft seal performance by • Reduces deflection at stuffing box to <0.05 mm /
reducing unexpected shutdowns and minimizing 0.002 in
operation and maintenance costs
• Helps extend shaft seal lifecycle and reduces
unexpected shutdowns and maintenance costs

Externally adjustable side plate Variety of shaft seal

• Allows fast and simple impeller clearance setting, • Effective dynamic, single and double mechanical
thereby minimizing life cycle costs and ensuring seals and gland packing
continued high efficiency • Fast and simple installation
Modular and Rigid Bearing Unit Design
Shaft is made of strong duplex stainless steel Now Hydraulics Design
Deflection at stuffing box less than 0.05 mm at the shaft seal High efficiency up to 93%
area that extend lifecycle of bearing and mechanical seal Wide performance range
Only 7 sizes of bearing housing Reduced total operational cost & energy consumption
73 series and NU series bearings on both drive and non-drive For pumping clean, abrasive and erosive liquids
ends are standard options

Structural Design Concept

Shaft Seal Types Multi optional flange drilling standards.
Variety of seal options are available, single, ISO, ASME, DIN, GB, JIS etc.
double, gland packing and dynamic seaI Back pull-out design facilitates fast and
Dynamic seal - no external sealing water or easy access when servicing
instruments needed Flexible coupling with spacer for quick
No sealing water treatment costs service

Pump Materials

‌ Nominal chemical composition %

Stainless steel design C max. Cr Ni Mo Cu N

Duplex ASTM A890 Grade 3A 0.06 24.0-27.0 4.0-6.0 1.75-2.50 - 0.15-0.25

ASTM A890 Grade 1B 0.04 24.5-26.5 4.75-6.00 1.75-2.25 2.75-3.25 0.10-0.25
ASTM A890 Grade 5A 0.03 24.0-26.0 6.0-8.0 4.0-5.0 - 0.10-0.30
Austenitic AVESTA 654 SMO1) 0.025 23.0-25.0 21.0-23.0 7.1-7.5 0.3-0.7 0.45-0.55
Martensitic ASTM A747 Grade CB7Cu-2 0.07 14.0-15.5 4.5-5.5 - 2.5-3.2 -
Cast iron design C Cr Ni Mo Cu Si

Cast iron ASTM A48 CL 35 B - - - - - -

Chromium iron*) A532 IIIA 2.0-3.3 23.0-30.0 2.5 max. 3.0 max. 1.2 max. 1.5 max.

Material alternatives for other parts

Gasket material Klinger SIL C-4430 Used in temperature range -40...+160 °C and pH 2-12
PTFE/glass Used in temperature range -190...+240 °C and pH 0-14
O-ring material EPDM Used in temperature range -50...+150 °C
FKM Used in temperature range -20...+250 °C
 MAP/MUP ISO Foot Supported
End Suction Single Stage Centrifugal Pumps

Oil & Gas Hydrocarbon Power Pulp and General Chemical Water
Processing Generation Paper Industry Process
Industry Industry

Operating Data

Metric Imperial
up to 2,500 l/s Capacities 39,630 USgpm

up to 160 m Heads up to 525 feet

up to 25 bar Pressures up to 360 psi

up to 180°C Temperatures up to 356°F

up to 3,600 rpm up to 3,600 rpm

Maximum speed of rotation

H (m) Q (USgpm)

10 20 30 500 1,000 2,000 5,000 10,000 20,000 50,000

200 600

400
100

200
60

40
100
20

50
10

20

10

1
1 2 4 6 10 20 40 60 100 200 400 600 1,000 2,000 4,000
Q (l/s)

Closed Impeller Open Impeller Special Open Impeller

is used for pumping clean liquids is designed for liquids containing is suitable for liquids containing
or liquids containing some solid particles, abrasive liquids or bigger solid particles and long fibers,
impurities. paper stock up to 8% consistency. abrasive liquids or paper stock up to
8% consistency.
HEBEI MIZZTECH
‌ MINERAL EQUIPMENT CO., LTD
NO. 245, Tianshan Street,
High Technology Industrial Development Zone,
Shijiazhuang, Hebei Province, China

T. +86 311 8983 3155

M. +86 138 1077 7318
F. +86 311 8983 3166
E. sales@[Link]
W. [Link]

Copyright © MIZZTECH
This brochure is a general presentation. It does not provide any warranty or guarantee of any kind. Please, contact
us for a description of the warranties and guarantees offered with our products. Directions for use and safety will be
given separately. All information herein is subject to change without notice.