PSF133UM.
qxd 13/04/2004 14:13 Page 1
[Link]
MINERVA® MX Marine
811F & 811FEx MXTechnology® Addressable Solar Blind
InfraRed Flame Detectors
Features:
Unlike UV and UV/IR detection, not blinded
by oil mist in machinery spaces
Reduces cabling, no interface required
No additional power source required
Easy installation, uses a common plug in
base for smoke and heat detectors
Can be used on all vessels as fully marine
approved
Standard or Intrinsically Safe
ATEX approved Ordering Information:
The 811F and 811FEx point type flame detectors are Stockcode Description
part of the MXTechnology® range of digital 516.800.007 811F MX IR Flame Detector
addressable fire detectors. MXTechnology® 516.800.067 811FEx MX IR Flame
incorporates heat, optical and carbon monoxide Detector Intrinsically Safe
detection. The 811F and 811FEx flame detectors 517.050.017 5B 5" Universal Base
present a cost effective solution to providing false 516.800.903 801IB Isolator Base
alarm free flame detection for enclosed applications. 517.050.610 MUBEx Base for
600/800Ex
Both the 811F and the 811FEx are full featured solar 514.001.063 EXI800 MX I.S. Loop
blind flame detectors for enclosed use and boast a Interface
high degree of false alarm immunity. The standard 517.001.259 Pepperl & Fuchs KFD0-CS-
unit is the 811F and it is designed for direct Ex1.54 Galvanic Isolator
connection to the MX digital loop, employing the 517.001.247 DX170 MTL5/7000
same detector base or functional base as other 800 Enclosure
series fire detectors. 592.001.012 T110 IR Test Source
592.001.018 T110 Test Source Adapter
The 811FEx is an intrinsically safe version intended
for use in hazardous atmospheres and must be
connected via an EXI800 interface and galvanic
isolator. The detectors are designed to comply with
EN 50 014 and EN50 020 for intrinsically safe
apparatus. They are certified: ATEX code: II 1 G
Cenelec code: EEx ia IIC T4.
[Link] Fire Detection
[Link] 13/04/2004 14:13 Page 2
[Link]
Mechanical Environmental
Detector Material: FR110 ‘BAYBLEND’ Operating temperature: -20oC to +70oC
Dimensions (mm): 108 x 21.2
Weight: - 811F 74g Operation below 0oC is not recommended unless steps are taken to
- 811FEx 108g eliminate condensation and hence ice formation on the detector.
Electrical Storage Temperature: -40oC to +80oC
Loop Voltage: 20 – 40 V Relative Humidity: 90% RH continuous (non-
Quiescent current: 300 micro Amp condensing) and up to 99% RH
Alarm current: 3 mA typical intermittent (non-condensing)
Performance
Intrinsic Safety Rating Range: 0.1m2 n-heptane at 20m
Maximum Voltage for Safety (Ui) 28V 0.4m2 n-heptane at 50m
Maximum Current for Safety (Ii) 93mA Field of View: 100o
Maximum Power Input (Pi) 650mW
Mounting Bases
Equivalent Inductance (Li) 0
5B: 5” Universal Base
Equivalent Capacitance (Ci) 0
MUBEx: I.S. Universal base
Hazardous Area Functional bases that provide relays, sounders and isolation can be
ATEX code: ATEX 0422X II 1 G EEx ia IIC T4 used with the 811F but cannot form part of an intrinsically safe
circuit.
Connections: L -VE IN/OUT
L1 +VE IN/OUT
801F Only R Remore LED -VE
50o 50o
Note 1: When the risk is a hot
0.05m2
4m vibrating body the detector should
be mounted securely using a
9.5m
suitably fabricated bracket at an
8m angle or on a vertical surface to
0.1m2
view the risk.
19m
12m
0.2m2
Note 2: Diagram not to scale
28.5m
16m
0.4m2
38m
Approx Flame Area
MX Technology® is a registered trademark of a subsidiary of Tyco International Ltd.
[Link]
