joinery machines

formula line
formula line
The range of machines that completes and
satisfies all the needs of any workshop,
designed and fully guaranteed by SCM.

SCM guaranteed quality

All the formula machines are guaranteed
by SCM, reflecting their level of quality
and reliability.
 classical / circular saw / 6

machines
6/23 / planers / 12

/ spindle moulders / 20

/ band saws / 28 / radial saws / 30

complementary
machines / vacuum dust extractors / 36

28/41

/ clamp / 40
 automatic
machines
24/27 / structuring/brushing machines / 24

/ cut-off saw / 32 / horizontal mortiser / 34

/ dust extractors with bag / 38 / feeders / 39

The motors powers in this catalogue are expressed in S6, except where otherwise specified.
In this catalogue, machines are shown in CE configuration and with options.
We reserve the right to modify technical specifications without prior notice, provided that such modifications do not affect safety as per CE norms.
 circular High quality construction
to perform professional work.

saw
formula s 40
 A with 3200 mm carriage mm 7250
B with 1000 mm cutting width with rip fence mm 4780
B with 1270 mm cutting width with rip fence mm 5050
B with 1500 mm cutting width with rip fence mm 5280

S Standard
O Option

formula s 40
Squaring capacity mm 3200
Stop on fence for squaring cuts extendable up to mm 3200
Standard cutting width with rip fence mm 1270
Main saw blade diameter (hole) mm 400 (30)
Scoring blade diameter (hole) mm 120 (20)
Max. saw blade projection from the table at 90° mm 140
Max. saw blade projection from the table at 45° mm 99
Saw blade speed rpm 3700
Scoring blade speed rpm 8500
Saw blade tilting degrees 90 ÷ 45
Exhaust outlet diameter at base mm 120
Exhaust outlet diameter on blade protection mm 80 (60 NON CE version)
Motor power with direct start (standard) kW 7
Motor power with automatic star-delta start (option) kW 9
Standard features and main optional devices
Automatic motor brake on main blade (only CE version) S
Device for angular cuts O
Device for angular cuts with self-adjustment of the stop position O
Device for rip cuts O
Overhead saw blade protection (optional device for NON CE version) S
Cutting width on rip fence 1000 mm or 1500 mm O
“M” version with 3 saw blade rotating speeds and powered unit lifting and tilting O
“M Plus” version with 3 saw blade rotating speeds, automatic rip fence, mobile control panel and 9 kW motor O

6/7
 circular
saw
operating
groups
Smooth movement and sturdy support
surface
Saw carriage
The circular saws carriage of the formula line utilizes
a sliding system on aluminum stiff profiles with
hardened steel guides using an exclusive method of
mechanical fixing. This allows a straight line precision
of +/- 0,05 mm along the entire carriage length.
The best precision is guaranteed overtime even with
intensive use and without maintenance.

Sturdy structure
Saw unit
A large structure, an hardened cast iron work table and an innovative operating unit prevent viibration to ensure
excellent finishing. The height adjustment on round guides ensures smooth movements even after years of use.
The controls on the machine front and therefore in an easily accessible position by the operator guarantee a Optimal support
further saving of time in the preparation process. Large squaring frame
It enables the squaring of panels up to 3200 x 3200 mm.
Simple and effective It is fitted with a guide complete with two reversible
Scoring unit adjustment stops and an idle roller to facilitate the loading of large
The scoring unit is moved vertically and horizontally through a lever system which ensures the complete absence of panels. The guide also allows angular cutting up to 45°.
play. This system also enables quick positioning thus limitng the need of sawing tests.
 circular
Angular cutting device
equipped with:
- telescopic fence with two

saw reversible stops

- preset for angle rapid selection

optional
devices

Device for angular cutting with automatic self-adjustment of the stop position with Rip cutting device
respect to the blade Particularly useful for trim cuts on long work pieces.
Each time the cutting angle is adjusted so that the distance between the stop and
the blade remains constant. This enables rapid set-up and reduces test cutting.

8/9
circular
Electronic readout for rip
fence position
Reading system on magnetic

saw band and possibility of relative

and micrometric adjustments.

optional
devices

Powered rip fence with electronic

positioning
Easy and precise positioning from
numeric keyboard and by pushing a
button, the fence rapidly reach the
requested position which is visualized
on the electronic display.

Overhead saw blade protection

Three saw blade rotating speeds Fitted in a tilted position it
The speed change can be made increases the useful cutting
easily from the opening on the width to the rip fence and
work table. guarantees the maximum
“M” and “M Plus” version flexibility.
10/11
surface planers Perfect surface, practical and ergonomic
Both models feature long, cast-iron work

formula f 2 tables and a large anodised aluminum

fence. An optimum high-quality finish
is guaranteed even on large size work

formula f 1 pieces.
formula f 1 formula f 2

S Standard
O Option

formula f1 f2
Working width mm 410 520
Maximum removal mm 8 8
Total length of work tables mm 2610 2720
Dimensions of the surfacing fence mm 1200x190 1200x190
Exhaust outlet diameter mm 120 160
Motor power with direct start (standard) kW 5 5
Motor power with star-delta start (option) kW - 7
Standard features and main optional devices rpm 3700
Cutterblock with 4 knives S S
“Tersa” cutterblock with 4 throwaway knives O O
Additional overturning fence O O
“Xylent” cutterblock O O
Maintenance case for “Xylent” cutterblock O O
Automatic star-delta start O O

12/13
thicknessing Sturdiness but also easy-to-use and
precise, stylish with practical design,

planers a wide range of applications.

formula sp 1
formula sp 2
formula sp 1 formula sp 2

S Standard
O Option

formula sp 1 sp 2
Working width mm 520 630
Maximum removal mm 8 8
Work table length mm 1000 1000
Work table height mm 250 300
Feed speed m/min 5/8/12/18 5/8/12/18
Exhaust outlet diameter mm 150 150
Motor power with manual star-delta start kW 7 7
Standard features and main optional devices S S
Outfeed rubber-coated steel roller S S
3rd top feed roller, rubber-coated & power driven O O
Work table with 2 idle rollers O O
1st powered sectioned steel feed roller O O
Cutterblock with 4 knives S S
“Tersa” cutterblock with 4 throwaway knives O O
Electric work table lifting S S
“Xylent” cutterblock O O
Maintenance case for “Xylent” cutterblock O O
Motor power with automatic star-delta start 9 kW O O
Automatic star-delta start O O

14/15
 planers formula line thicknessers are
renowned for their strength.
The operating unit with a four-knife cutter block
operating guarantees a high-quality finish. An infeed roller with
helical grooving and a rubber coated outfeed roller

groups
ensure efficient and smooth work piece feed.

Surfacing fence
The fence is mounted on a precision
mechanism enabling accurate angle
adjustment from 90° to 45°.
High quality finish
Work tables made from ribbed cast-iron
The ribbed work tables structure with
the feeding by means of a parallelogram
mechanism on connecting rods always
gives the same distance between the
cutterblock and the table. This enables
a quick and easy adjustment of the
stock removal rates. The strong cast-
iron structure of the cutter block with 4
knives grants optimal finish and absence
of vibration.
formula f 1, formula f 2

Sturdy structure with

precision
Work table lifting
The ground, cast-iron work table is
mounted on four recirculating ball
screws simultaneously driven by a chain
guaranteeing the best working stability.
The machines are equipped with electric
adjustment as standard feature; a
solution offering ease-of-use, precise
and rapid set-up. Ease-of-use
formula sp 1, formula sp 2 Control system
All the controls are in an ergonomic
position on the front of the machine
such as the feed speed selector, the
electric work height adjustment and
a mechanical digital readout of
working height.
formula sp 1, formula sp 2

16/17
 planers Simple and rapid
“Tersa” cutterblock with throwaway
knives

optional Automatic knives clamping by means of

the centrifugal force ensures safe and
precise machining. The system, without
devices fixing screws makes knives substitution
extremely fast.

1 mm

The specific knives fixing system to the Easy cutter block knives introduction. Knives self-locking at the machine Quick knives substitution by gibs
cutterblock eliminates the setting up starting thanks to the centrifugal force. unlocking.
times. The automatic projection of all knives is
perfectly adjusted.
“Xylent” cutterblock
The 3 spiralknives give an exceptional finish. Reduced noise during machining provides a more
comfortable working environment. It also improves the dust extraction due to the production of very
small chips. Each cutter has 4 tips which can be rotated into the cutting position when worn. Therefore
increasing the production life of the cutter block before knives require replacement.

The thicknessing work table

can be equipped with two
rollers to optimise work
piece feed and throughput.
formula sp 1, formula sp 2

Maintenance case for Third feed roller

This is a powered, steel or rubber-coated roller designed to ensure perfect
“Xylent” cutterblock work piece feed with any type of wood.
Complete with:
formula sp 1, formula sp 2
- 1 cleaning/degreasing liquid bottle
for the resins cleaning
- 1 set dynamometric key
- 2 bit Torx
- 10 inserts
- 5 screws
- 1 brass bristle brush to clean the
spindle with mounted in inserts
- 1 steel bristle brush to clean the
inserts housings

18/19
spindle moulders High performance and very high
reliability with precise and flexible

formula t 70f operations and flexibility.

Rich equipment, for example the
dedicated versions for moulding and

formula t 60f tenoning.

 1194
1195

1230
1040

1135
730
1350 MAX

1725
730
1280
730

730
formula t 70f 2607
formula t 60f
2607

1195 1195 1195 1194 1194 1194

1040

730
730

1040
1350 MAX

1230
1230
1280

1135
730

1725
1725
1350 MAX

730
730
730
1195
2607
1194
700 2607 2607 700 2607
1195
1040

730
1350 MAX

1194

1230
1135
1040

1725
S Standard

730
730
O Option

1350 MAX

1230
2607

1725
730
formula
1195
2607 t 70f t 60f
Work table dimensions
700 2607
1194
mm 1200x730 1200x730
700
Spindle height mm 1802607 170
730
1350 MAX

Max. tool diameter when profiling mm 250 250

1230
Max. tool diameter when tenoning mm 350 350

1725
730
Max. tool diameter when shaping mm 160 160
700 2607
Spindle stroke mm 90 90
700 2607
Spindle rotating speed rpm 3000/4500/6000/7000/10000 3000/4500/6000/8000/10000
Max. dimension of returning tool under table at 90° mm 320x85 320x85
Exhaust outlet diameter on fence mm 120 120
Exhaust outlet diameter behind the base mm 120 120
Motor power with direct start kW - 5
Motor power with manual star-delta start (automatic start for USA/Canada version) kW 7 7 (option)
Main options O -
Carriage on the table for small tenoning operations 0 O
“LL” version for profiling operations O O
“T” version for tenoning operations (lateral carriage) 0 O
“TL” version for tenoning and profiling operations O O
“Fast” sectional table O -
Spindle fence with handwheel movement O O
Anodised aluminum spindle fences O O
Interchangeable spindle 0 O
Spindle reverse rotation 0 O
9 kW motor power with manual star-delta start (automatic for USA/Canada version) 0 -

20/21
spindle moulders Simple working
Carriage on work table for small tenoning jobs

versions for Ideal for tenoning of small work pieces for versions
without sliding carriage. Mitre cuts with angles of a
+/- 60°. on the work table are possible. Easy fitting

tenoning and and removal due to the fixing system on the work
table.

moulding

t 60f “TL”
in CE version
(machine with
options)

Ideal for long work pieces Precision and stability in machining

“LL” version “T” and “TL” versions
The “LL” version is available with two side table extensions and an extractable The “T” or “TL” versions meet the special requirements of door and window
front support table, for increased safety and more precise machining of long and machining. The table extension for large work pieces (“TL” version) provides a larger
heavy profiles. The cast-iron tables have a ground surface to guarantee support surface. For precision tenoning, the machine has a sliding table which runs
the maximum flatness. easily on axial bearings on a hardened, ground bar.
The table has a large support surface and it is complete with a +/- 45° tilting fence
and incorporates a cam lock clamping device. The tenoning version has special
safety devices, such as arm guards and a dedicated hood which allows the use of
tools with a diameter of up to 350 mm.
 spindle
Anodised aluminium guides with
“T”-shaped upper groove for insertion of
stops during interrupted machining. It

moulders is complete with connecting bars for a

maximum supporting surface area close to
the tool.

optional
devices
Very quick and simple Set-up
Spindle fence with movement by
handwheel
The entire fence has continuous linear
adjustment by means of a single handwheel.
This handwheel provides adjustment to
the infeed and outfeed fence independently.
Movements are displayed by mechanical
digital readouts. The side handles make it Interchangeable spindle with MK4
easy to remove the guide from the work table. fitting on t 60f and MK5 on t 70f for
using tools with different hole diameters
Spindle reverse rotation thanks to the possibility of rapid
for even more flexible use. changing of the spindle.

The best support for the

work piece
“Fast” sectional table
It substitutes rings and allows
maximum support for the work piece
being machined. The table can even
be adjusted after the tools have been
fitted. Applying a table segment behind
the spindle used for machining it
guarantees very efficient extraction.
For formula t 70f only

22/23
 structuring/ Sturdiness and precision
are now available also for

brushing machines the craftsman.

formula str 32
formula str 62
formula str 32 formula str 62
1299 831 1319 1215

1215
1442
1325

832
S Standard
O Option

formula str 32r str 32l str 62r str 62l

Working units 2 2 2 2
Working width mm 300 300 600 600
Maximum working height mm 300 300 300 300
Units motor power @ 50 Hz kW 3 3 4 4
Feed belt motor power @ 50 Hz kW 0,22 0,22 0,37 0,37
Exhaust outlets diameter mm 2 x 150 2 x 150 2 x 150 2 x 150
Brush speed rpm 1500 100 ÷ 1500 1500 100 ÷ 1500
Feed speed m/min 3 ÷ 20 3 ÷ 20 3 ÷ 20 3 ÷ 20
Brush diameter mm 190 / 190 230 / 230 190 / 190 230 / 230
Net weight kg 440 440 750 750
Dimensions (LxDxH) mm 1300x900x1300 1300x900x1300 1300x1200x1550 1300x1200x1550
main options
Powered operating units lifting with digital readouts O O O O
Nylon brush (in place of the sanding brush, 300 mm width) - O - O
“Jigsaw” cross unit creating saw blade effect
(first operating unit).
The unit includes: O O O O
- 25 steel strips
- 1,5 kW motor controlled by inverter
Additional steel brush (wire 0,2 mm) - O - O
Additional steel brush (wire 0,3 mm) O O O O
Additional Tynex brush (60 grit) - O - O
Additional Tynex brush (80 grit) O O O O

24/25
 Perfect
structuring/ finish
The double operating

brushing machines unit allows to obtain

the request finish in
a single passage.

operating
groups

Operating units lifting by means Effective

of handwheels and numerical
readout.
solutions
Feed speed variation
with mechanical
speed variator for a
simple and reliable
solution.
 Effective
extraction system
The large diameter of the
exhaust outlets grants an
optimal dust extraction.

The best adherence Rapid pressure

thanks to the rubber rollers adjustment
belt with vertical through dedicated
grooves. knobs.

26/27
 band Professional band saws, sturdy and
extremely precise, for woodworking

saws shops and craftsmen.

formula s 440p
formula s 540p
B

formula s 640p A C

formula s 740p
formula s 840p
formula s 940p
s 440p s 540p s 640p s 740p s 840p s 940p
A mm 1940 2100 2340 2395 2625 2860
B mm 420 520 600 710 800 800
C mm 805 940 1145 1265 1485 1590

formula s 440p s 540p s 640p s 740p s 840p s 940p

Work table dimensions mm 420x578 520x720 600x885 710x1000 800x1160 800x1250
Cast iron saw wheels diameter mm 440 540 640 740 840 940
Saw wheels width mm 33 38 38 40 45 54
Max. cutting height mm 440 (18") 500 (20") 600 (24") 450 (18") 540 (21") 560 (22")
Max. cutting width mm 425 520 620 720 820 910
Work table tilting (CE) mm 0° ÷ 45° (20°) 0° ÷ 45° (20°) 0° ÷ 45° (20°) 0° ÷ 45° (20°) 0° ÷ 45° (20°) 0° ÷ 45° (20°)
Min./max. blade dimensions mm 6/30 6/35 8/35 10/40 10/45 12/50
Standard three-phase motor power S1 400 V 50 Hz kW (Hp) 2,2 (3) 2,2 (3) 3 (4) 4 (5,5) 5,5 (7,5) 7,5 (10)
Standard three-phase motor power S1 220 V 60 Hz kW (Hp) 3,6 (4,8) 3,6 (4,8) 3,6 (4,8) 5 (6,6) 6,7 (9) 6,7 (9)
Standard single-phase motor power S1 220 V 60 Hz kW (Hp) 3,6 (4,8) 3,6 (4,8) 3,6 (4,8) - - -
Exhaust outlets diameter mm 2 x 120 2 x 120 2 x 120 2 x 120 2 x 140 2 x 140
 band Perfect results
Blade guide
A perfect cut result is

saws assured by the top and

bottom high precision
blade guides. Practical
operating machines suitable also
to perform straight and

groups
tilted cuts on wood,
plastic and aluminum.

Safety first
Protections
Total safety machining with telescopic protections
with rackwork to the blade.

Solidity and sturdiness

Cast iron saw wheels
Very thick, cast iron wheels, as well as the work table,
running on sealed for life ball bearings.

28/29
 radial saws
formula sr 650
formula sr 750
formula sr 900

formula sr 900 sr 750 sr 650

Blade diameter mm 400 350 ÷400 350 ÷400
Blade tilting -45° ÷ +45° -45° ÷ +45° -45° ÷ +45°
Max. cutting depth with 90°/45° blade (* 400 mm blade diameter available as an option) mm 120/83 120/83* 120/83*
Max. cross-cut capacity mm 900 x 20 750 x 20 640 x 20
Three-phase motors power starting from kW/Hz 4 (4) / 50 (60) 3 (3) / 50 (60) 3 (3) / 50 (60)
radial saws
operating
groups

Long-lasting functionality Precision and smoothness Absolute safety

Column protection cover Carriage with 8 bearings Blade guard
The mechanisms of which the machine The 8 sliding bearings on the guides It guarantees the absolute
is equipped, as the protection grant the best carriage smoothness operator’s safety.
cover on the arm column support, and an optimal support for a perfect
protect the mechanical parts from cutting result.
dust, guaranteeing the best operation
over time.

Maximum cutting precision

Cast iron arm with steel interchangeable guides
The cast iron structure provides the arm the maximum solidity and rigidity for the
maximum cutting precision. The interchangeable sliding ways allow the operator a
simple and rapid replacing, in case of wear, without direct intervention on
the arm.
30/31
 cut-off saw
formula
cut 350

formula cut 350

Work table height mm 800
Blade diameter mm 350
Max. cross-cut capacity mm 210 x 30
Max. working pressure bar 8
Air consumption Nl/cycle 6
Exhaust outlets diameter mm 80
Three-phase motor power kW /Hz 3 (3) / 50 (60)
 cut-off
saw
operating
groups

The best cleaning Absolute safety Smart solutions

Exhaust outlets Blade guard Stops and pneumatic positioning
The exhaust outlets positioned near the The blade guard and the other operator’s The machine is equipped with
dust evacuation areas ensure a fully protection systems, as the bi-manual intelligent solutions as the optional
cleaning of the working environment. hand-safety control, allow to operate stops and the pneumatic positioning.
with absolute safety.

32/33
 horizontal
mortiser
as 16

formula as 16
Work table dimensions mm 287 x 550
Longitudinal stroke mm 200
Vertical stroke mm 160
Transversal stroke mm 125
Tool spindle diameter mm 1 ÷ 16
Spindle speed rpm 3000
horizontal
mortiser
operating
groups

Solidity and manageability Ease-of-use

Cast iron structure and sliding on cylindrical bars Hand-wheel and levers
Solidity and easy to handle with the cast iron strong Easy movement of the boring head due to the practical
structure which easily moves on cylindrical sliding bars. control by hand-wheel and levers.

34/35
 vacuum dust The vf series of the vacuum dust
extractors are specially designed to work
inside the workshop guaranteeing a level
Constant effectiveness
The top-of-the-range models (vf 250
and vf 300) are equipped with a inlet

extractors of dust emissions lower than 0,1 mg/m3.

Thanks to their slim design and the
possibility to connect multiple machines,
pre-chamber, thanks to this only the
thin chips comes into contact with the
sleeve filters while the larger chips

formula vf 140 they can completely replace the

traditional suction system.
are decanted and fall directly into the
baskets. A simple but extremely effective
solution.

formula vf 200c
formula vf 250
formula vf 300

formula vf 140 vf 200c vf 250 vf 300

Nominal air flow @ 20 m/s m³/h 1100 3000 4000 6000
Static pressure Pa 2200 2500 2800 3300
Max. air flow @ 20 m/s m³/h 3200 4600 6600 8000
Pressure @ max. air flow Pa 1570 1850 1600 1800
Exhaust outlets diameter mm 140 200 250 300
Filter surface area m^2 10 20 20 30
Antiestatic filter YES YES YES YES
Chip volume litres 115 2 x 100 2 x 175 3 x 175
Dimensions (LxPxA) mm 1000x995x2150 2240x872x2000 2525x1150x2440 3435x1150x2504
Three-phase motor power kW (Hp) 2,2 (3) 4 (5,5) 5,5 (7,5) 7,5 (10)
 vacuum Absolute performance
The vf 140 and vf 200c dust extractors are
equipped with cylindric cartridge filters to reduce

dust extractors the machine overall dimensions, the vf 250 and

vf 300 dust extractors use sleeve filters for the
best filtering and cleaning efficiency.

operating cartridge filter

groups

sleeve filter

Risk preventing Practicality at first place

The fan is positioned at the end of the filter, far away All dust extractors within the vf series comes with one
from the high risk of explosion zone. or more baskets to collect the sawdust. They are very
easy to move thanks to the wheels.

36/37
 dust extractors
with bag
formula eco 350q
formula eco 350t
formula eco 300d
formula eco 300s
formula eco 300sk

formula eco 350q eco 350t eco 300d eco 300s eco 300sk
Bags 4 3 2 1 1
Maximum fan air flow capacity m3/h 4560 4560 3900 2550 2550
Fan diameter mm 356 356 305 300 300
Exhaust outlet attachments 4 4 3 2 2
Exhaust outlets diameter mm 100 100 100 100 100
Bags diameter mm 1850 1850 1300 900 900
Bags capacity m3 0,79 0,59 0,43 0,15 0,15
Motor power kW (Hz) 5 (50) 3,7 (50) 2,2 (50) 1,5 (50) 1,5 (50)
 feeders
formula feed 48 formula feed 48 feeder with 4 rollers
complete with stand

formula feed 38 formula feed 38 feeder with 3 rollers

complete with stand

formula feed 4i feed 4i feeder with 4 rollers with inverter

complete with stand

formula feed 38 feed 48 feed 4i

Rollers number 3 4 4
Feed speed m/min 2/4/5,5/7/11/13/16,5/33 2/4/5,5/7/11/13/16,5/33 2 ÷ 22
Rollers diameter mm 120 120 120
Rollers width mm 60 60 60
Rollees excursion mm 18 18 18
Three-phase motor power kW (Hz) 0,75 (50) 0,75 (50) 0,50 (50)

38/39
 clamp
formula
clamp 2500

formula clamp 2500

Working dimensions mm 2500 x 1800
Stroke of vertical hydraulic cylinders mm 150
Thrust of each vertical hydraulic cylinders kg 1270
Stroke of horizontal hydraulic cylinders mm 120
Thrust of each horizontal hydraulic cylinder kg 770
 clamp
operating
groups

Ease-of-use Solidity and sturdiness Pressure under control

Hydraulic cylinders Lower cast iron supports Control panel
The simple and rapid vertical beams positioning system Even more machine sturdiness with the lower The hydraulic cylinders pressure is controlled by
allows a very simple hydraulic cylinders adjustment. cast iron supports. practical levers and a control panel which is equipped
with a valve with reading monometer and a locking
cock for the cylinders pressure maintaining. The
process is always under control.

40/41
THE STRONGEST
WOOD TECHNOLOGIES
ARE IN OUR DNA
SCM. A HERITAGE OF SKILLS IN A UNIQUE BRAND
Over 65 years of success gives SCM the centre stage in woodworking technology.
This heritage results from bringing together the best know-how in machining and
systems for wood-based manufacturing. SCM is present all over the world, brought
to you by the widest distribution network in the industry.

65 years history
3 main production sites in Italy
300.000 square metres of production space
17.000 machines manufactured per year
90% export
20 foreign branches
350 agents and dealers
500 support technicians
500 registered patents

In SCM’s DNA also strength and solidity of a great Group. The SCM Group is a world leader, manufacturing industrial equipment and components for machining the widest range of aterials.di materiali.

SCM GROUP, A HIGHLY SKILLED TEAM EXPERT IN INDUSTRIAL MACHINES AND COMPONENTS
INDUSTRIAL MACHINERY INDUSTRIAL COMPONENTS
Stand-alone machines, integrated systems and services dedicated Technological components for the Group’s machines and systems,
to processing a wide range of materials. for those of third-parties and the machinery industry.

WOODWORKING TECHNOLOGIES FOR PROCESSING SPINDLES AND TECHNOLOGICAL ELECTRIC PANELS METALWORK CAST IRON
TECHNOLOGIES COMPOSITE MATERIALS, ALUMINIUM, COMPONENTS
PLASTIC, GLASS, STONE, METAL
 SERVICE SPARE PARTS

PROMPT AND EXPERT

SCM provides a service that goes beyond the purchase, to SCM Group can count on 140 spare parts professionals
guarantee the long term performance of your technological worldwide to meet any request with real time shipments.
production system and peace of mind for your business.

TECHNICAL SUPPORT A COMPLETE RANGE OF AFTER-SALES 36,000 SPARE PARTS

THROUGH A NETWORK OF 1000 SERVICES

• installation and start-up of machines, cells,
Our spare parts inventory, with a value of 12
million euros, covers every single machine

TECHNICIANS AND AN INVENTORY lines and systems

• tailored training programs
SPARE PARTS GUARANTEED
We guarantee also hard to find parts, with 3,5
million euros invested in “critical“ spare parts.

OF 36,000 SPARE PARTS.

• telephone support to reduce times and costs
when machines are not working IMMEDIATE AVAILABILITY
• preventive maintenance programs to guarantee Over 90% of orders received are carried out the
long term performance same day thanks to the huge inventory available.
HIGHLY SPECIALISED TECHNICIANS, EFFICIENT • complete renovation of machines and plants
MANAGEMENT AND 6 SPARE PARTS BRANCHES to renew the added value of the investments 6 BRANCHES AROUND THE WORLD

AROUND THE WORLD GUARANTEE A CLOSE, • custom upgrading to update machines and The spare parts service can count on
worldwide support (Rimini, Singapore,
plants and meet new production requirements
SAFE AND EFFECTIVE TECHNICAL SUPPORT.
Shenzhen, Moscow, Atlanta, São Bento do Sul

500 SHIPMENTS A DAY

42/43
 REV. N. 02 - 06.2021 - MIC STUDIO
SCM GROUP SPA
via Casale 450 - 47826 Villa Verucchio, Rimini - Italy
tel. +39 0541 674111 - fax +39 0541 674274
[email protected]
www.scmwood.com