Zaber & Zubair Fabrics Ltd.

Fashion Testing Service, Pagar, Tongi, Gazipur-1710 DOC. NO. FTS-QSR-04-558

ISS. NO. / REV NO.: ' 01' / ‘03’
EFFECTIVE FROM: 27/06/2023
DEVELOPMENT (IOM) FABRIC TEST REPORT
Test Report No: FTS2024020825 Report Issue Date: 10.02.2024
PRODUCT INFORMATION
Buyer/ Supplier : WALMART Applicant : R&D-Development
IOM No. : 73704/2024 Sample Details : WOVEN FABRIC
Composition : 98% BCI COTTON & 2% SPANDEX Emarizing : PEACH FINISH
F21GM_W009_
Construction : (6+6)X(7+70D)+(7+70D)/60X38 Color CW 1
Fabric Finish : SOFT

Weave : PANAMA Claim Weight 11.97 oz/yd2 End Use : MENS

Note: The results relate only to the items/samples tested and select requested parameters only.
TEST SPECIFICATION
*Tested & reported according to “Walmart USA Apparel Quality Testing Manual December 16, 2022” Woven Fabric- & Inhouse Facility*
S/L Test Name & Standards Tested on Tested Values Requirements Result

Dimensional Stability Warp +1.0%

1. 1 After 3HL +1.0 to -4.0% Pass
AATCC 135 Weft -4.0%
Visual Appearance
2. After 3HL Overall Satisfactory Satisfactory Pass
AATCC 135
Distortion (Twist) After Wash
3. 2 After 3HL 3.9% 3.0% max. Fail
AATCC 179
CF to Chlorine Bleach Color
4. As Received 4.0 / Data
AATCC TS001 Change
Color
CF to Non-Chlorine Perborate 4.5
Change As Received
5. Bleach / Data
Color
AATCC TS001 Peroxide 4.5
Change
CF to Crocking Dry 4.5 3.0
6. 5 As Received Pass
AATCC 8 Wet 2.0 2.0
Mass per unit Area- oz/yd2 As Received/
7. 6 B/W 11.64 A/W 12.26 ±5% Pass
ASTM D3776 After 3HL
Warp 16.21 lbs 3.0 lbs
Tear Strength
8. 7 As Received Pass
ASTM D1424
Weft 26.62 lbs 2.5 lbs

Warp 151.0 lbs 50 lbs

Tensile Strength
9. 8 As Received Pass
ASTM D5034
Weft 114.0 lbs 40 lbs
Mode of
Yarn Slippage @1/4" Seam Strength
Failure
Yarn Slippage
10. 9 As Received Warp No Seam Opening 67.0 lbs TPO 25 lbs Pass
ASTM 1683
Weft No Seam Opening 54.0 lbs STB
pH
11. As Received 8.1 5.0 to 8.5 Pass
AATCC 81
12. 1 Fabric Width (Inch.) Over All 60.5”
As Received / Data
0 ASTM D3774 Cut Able 58.5”
13. 1 Fabric Construction
As Received Ends 56 Picks 40 / Data
1 ASTM D3775
14. 1 Stretch & Recovery - Elongation Growth Recovery
As Received Stretch: 15% Min. Fail
2 ASTM D3107 Weft 14.0% 2.0% 82.75%
Note: (+) means extension and (-) means shrinkage. Grey scale rating of ISO 105 A02 and A03 is based on 5 step of 1 to 5, where 1 is bad and 5 is good.

Md. Mahfujur Rahman Rokib Arif Ishtiaq Md. Akram Hossain

Lab Technician Sr. Executive Deputy Manager
Prepared By Reviewed By Authorized By

_________________A SISTER CONCERN OF NOMAN GROUP_____________

Fashion Testing Services ISO/IEC 17025:2017 Accredited from BAB.
Feedback/Complaints/Suggestion: 'Md. Akram Hossain'
[email protected], [email protected]