Brackish Water Reverse Osmosis Membranes
CPA
High Rejection Membranes
CPA (Composite Polyamide) membranes set the standard for RO membranes – over 600 million gallons per day of pure water are
produced by CPA elements for global municipalities and industries. CPA membranes are available in 4” and 8” diameters.
CPA Applications:
• Treatment of well waters for municipal drinking water
• Production of boiler feed water in power plants
• Production of ultrapure water for semiconductor, pharmaceutical and
food and beverage
CPA Product Offerings*:
CPA2-4040, CPA3, CPA5-LD-4040, CPA5-LD, CPA5 MAX, CPA6-LD, CPA6 MAX, CPA7-LD-4040, CPA7-LD, CPA7 MAX
ESPA
Energy Saving Membranes
ESPA (Energy Saving Polyamide) membranes achieve high flux / lower pressure without compromising standards for high rejection.
Since their introduction in the late 1990s, the ESPA membranes have gained wide acceptance in the water treatment industry due to the
significant operational cost savings associated with their use. ESPA membranes are available in 4” and 8” diameters.
ESPA Applications:
• Treatment of ground, surface and wastewater
• High purity industrial applications
• Boron reduction for potable and agricultural water
• Municipal waste water reclamation
ESPA Product Offerings*:
ESPA1-LD-4040, ESPA1, ESPA2-LD-4040, ESPA2-LD, ESPA2 MAX, ESPA2-LD MAX, ESPAB MAX, ESPA4-LD-4040, ESPA4-LD,
ESPA4-LD HP, ESPA4 MAX
LFC
Low Fouling Membrane
LFC (Low Fouling Composite) membranes combine neutral surface charge and hydrophilicity, providing significant reduction in fouling rates
and increasing membrane effciency by restoring nominal performance after cleaning. LFC membranes are available in 4” and 8” diameters.
LFC Applications:
• Municipal wastewater treatment
• Industrial wastewater treatment
• Wastewater with organic fouling potential
LFC Product Offerings*:
LFC3-LD-4040, LFC3-LD
Seawater Reverse Osmosis Membranes
SWC
High Rejection Membranes for Seawater Desalination
SWC (Seawater Composite) membranes offer a consistently pure end-product with lowest energy consumption at varying levels of
seawater salinities. SWC membranes are available in 4”and 8” diameters.
SWC Applications:
• Conventional and hybrid seawater desalination plants
• Boron reduction for potable and agricultural water
SWC Product Offerings*:
SWC4-LD, SWC4 MAX, SWC5-LD-4040, SWC5-LD, SWC5 MAX, SWC6-LD, SWC6 MAX
Nanofiltration Membranes
Hydranautics’ broad line of nanofiltration elements include our ESNA, NANO and HYDRACoRe membranes that provide a range of salinity
rejections from 30% to 90% but with high rejection for selected contaminants such as pesticides, natural organic matter (NOM), pathogens,
sulfate, iron or other specific material. These nanofiltration membranes are available in 4” and 8” diameters.
Applications:
• Brackish water softening
• Removal of NOM, TOC and other organics
• Industrial waste water reclamation to achieve high recovery
• Sulfate removal from seawater
Product Offerings*:
ESNA1-LF-LD, ESNA1-LF2-LD, ESNA4-LD, NANO-SW-4040, NANO-SW, NANO-SW MAX, NANO-SW HP, NANO-SW MAX HP,
NANO-SW UH, HYDRACoRe10-LD-4040, HYDRACoRe10-LD, HYDRACoRe50-LD-4040, HYDRACoRe50-LD
Integration Membrane Solutions Design (IMSDesign Cloud)
IMSDesign Cloud the world’s first cloud-based membrane projection software which can be accessed on www.imsdesign.com. It empowers
you with the flexibility to perform membrane projections, anytime, anywhere using any device. This next gen integrated membrane
projection software will enable you to simulate various combinations of RO, NF and UF membrane projections in a seamless manner.
* Element specification sheets and technical bulletins are available at www.membranes.com. The LD variant of a membrane uses the low-differential
LD Technology® which minimizes colloidal fouling when used with conventional pre-treatment equipment. LD membranes offer consistently low feed
pressures and longer intervals between cleanings. The MAX variant of a membrane has 440 ft2 (40.9 m2) active membrane surface area. The increased
membrane area reduces capital costs as fewer pressure vessels are required which also reduces the required floor space.
Installation references are also available upon request.
Solutions You Need.
Technologies You Trust!
Hydranautics Corporate office
401 Jones Road, Oceanside, CA 92058, USA Toll Free: +1-800-CPA-PURE Tel: +1 760 901 2500 Fax: +1 760 901 2578
Web: www.membranes.com Email:
[email protected]Americas Europe and Africa Middle East Indian Subcontinent China SEA & Oceania Japan
401 Jones Road, Calle Constitucion 3, UAE 516 ‘C’ Wing - 215 15-16F, The Place Tower 438 Alexandra Road 26F, Shinagawa
Oceanside, 3° 5ª Sant Just Tel: +971 54236 7224 Atrium, Andheri Kurla C, 150 Zunyi Road, #19-01/04, Season Terrace,
CA 92058, USA Desvern, Road, Andheri (East), Changning District, Alexandra Point, 1-2-70, Konan,
Tel: +1 760 901 2500 08960 Barcelona, Saudi Arabia Mumbai 400059, Shanghai 200051, Singapore 119958 Minato-ku, 108-0075,
Spain Tel: +966 50344 8539 India P.R. China Tel: +65 6879 3820 Tokyo, Japan
Tel: +34 934 731 722 Tel: +91 22 4003 0500 Tel: +86 21 5208 2255 Tel: +81 3 6632 2044
