Scribd
Upload
172 views1 page

InnoPlus HDPE Grades: HD2208J & HD2308J

InnoPlus HD2208J and HD2308J are high density polyethylene resins designed for injection molding with good impact strength and UV resistance, suitable for outdoor applications. They possess specific physical and mechanical properties, including a melt flow rate of 3.7 to 6 g/10 min and tensile strength at yield of 310 to 300 kg/cm2. The product complies with U.S. FDA regulations for food contact, and typical processing temperatures are recommended between 170-200°C for extruder and 185-205°C for nozzle.

Uploaded by

Abdullah Al Mamun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
172 views1 page

InnoPlus HDPE Grades: HD2208J & HD2308J

InnoPlus HD2208J and HD2308J are high density polyethylene resins designed for injection molding with good impact strength and UV resistance, suitable for outdoor applications. They possess specific physical and mechanical properties, including a melt flow rate of 3.7 to 6 g/10 min and tensile strength at yield of 310 to 300 kg/cm2. The product complies with U.S. FDA regulations for food contact, and typical processing temperatures are recommended between 170-200°C for extruder and 185-205°C for nozzle.

Uploaded by

Abdullah Al Mamun
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

HD2208 / HD2308J

High Density Polyethylene Resin


Product Description :
InnoPlus HD2208J and HD2308J are high density polyethylene injection molding grade. They are tailored with narrow
molecular weight distribution (MWD) result for good impact strength. Furthermore, they are UV stabilizer added that give the
excellent UV resistance for outdoor applications such as auto part and industrial product.
Typical Application : Crates, Pallets, Garbage bins, Industrial tubes, Fruit baskets, Caps and Closures
Typical Properties :
Properties Typical Value Unit Test Method
HD2208J HD2308J
Physical Properties
Melt Flow Rate (190 oC, 2.16 kg) 3.7 6 g/10 min ASTM D1238
Density 0.961 0.962 g/cm3 ASTM D1505
Vicat Softening Point @ 10 N, 50 oC/hr 125 125 o
C ASTM D1525
Melting Point 131 131 o
C ASTM D2117
Mechanical Properties
Tensile Strength @ Yield 310 300 kg/cm2 ASTM D638
Tensile Strength @ Break 220 120 kg/cm2 ASTM D638
Elongation @ Break > 1000 750 % ASTM D638
Stiffness 11000 11000 kg/cm2 ASTM D747
Flexural Modulus 12000 15000 kg/cm2 ASTM D790
Notched Izod Impact Strength 5 (C) * 4 (C) * [Link]/cm ASTM D256
Durometer Hardness 65 65 Shore D ASTM D2240
ESCR (Condition B, 25 % Igepal) 6 5 hrs, F50 ASTM D1693
* C = Complete Break
Recommendation :
Extruder temperature : 170 - 200 oC
Nozzle temperature : 185 - 205 oC
FDA Statement :
HDPE under the brand InnoPlus complies with U.S. FDA 21 CFR 177.1520 regulation for polyethylene used in articles that
contact food except for articles used for packaging or holding food during cooking.
Note : Properties reported here are typical values of the product, not to be considered as specifications.
PTT Chemical makes no representations as to the accuracy or completeness of the information contained herein.
PTT Polymer Marketing Company Limited
Energy Complex Building A, 9thFloor, 555/1 Vibhavadi Rangsit Road, Chatuchak, Bangkok 10900 Tel: 66 2140 4487 Fax: 66 2140 4335 Revised Date : March, 2010

You might also like