Scribd
Upload
44 views2 pages

Em D132 Chemical 3P C Valve

The EM-D132-CHEMICAL-3P-C is a dry tech IP68 valve designed for environmental hazards, capable of handling heavy water and chemical fluids. It features a rated current of 3A, operational voltage of 24V AC or 12V DC, and operates within a fluid temperature range of -10 °C to +90 °C. The valve has a maximum pressure operation of 3 Bar and is constructed from PPS with EPDM seals for durability.

Uploaded by

Diego Granados
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views2 pages

Em D132 Chemical 3P C Valve

The EM-D132-CHEMICAL-3P-C is a dry tech IP68 valve designed for environmental hazards, capable of handling heavy water and chemical fluids. It features a rated current of 3A, operational voltage of 24V AC or 12V DC, and operates within a fluid temperature range of -10 °C to +90 °C. The valve has a maximum pressure operation of 3 Bar and is constructed from PPS with EPDM seals for durability.

Uploaded by

Diego Granados
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Product data sheet EM-D132-CHEMICAL-3P-C

Characteristics DRY TECH IP68 VALVE NON FLUID CONTACT –


ENVIRONMENTAL HAZARDS FIELD & HEAVY
WATER & CHEMICAL FLUID

Connections
Cable connection Screw terminal ≤ 1.5 mm² 7...10 mm Pg 9
Cable connector fixing Locking screw
Electrical connection EN 50014 - EN 50028 – IP 68 – PROTECTION

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Electrical
[In] rated current 3A
[Ue] rated operational voltage 24 V AC or 12 VCC
Contact resistance ≤ 4000 µOhm
Insulating resistance > 0.1 GOhm IP Connector DIN 43650 A

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
Environment

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
IP degree of protection IP68
Fluid Temperature Operation - 10 °C to + 90 °C
Fluid Type Chemical Resist – Water heavy
Max Pressure Operation 3 Bar – 43.5 PSI

Functional
Open & Close Time 30 mili second

Physical characteristics
Body PPS (Polyphenylene-sulfide) fibreglass reinforced
Dry seal Fluid Contact EPDM = Ethylene-propylene elastomer

Process Connection ½ “ BSP Thread

Product identification
Accessory / separate part category Cabling accessories
Accessory / separate part type Connector IP 68
DIMENSION

Differential pressure (bar)


Series and type Power absorption
Orifice Δp max
Port size Kv Weight
size Sealings Notes
ISO 228 (m3/h) (kg)
(mm) Δp min Gases Liquids AC (VA)
DC
Valve Coil
(W)
AC DC AC DC Inrush Holding

M1 EPDM
G 1/2 9 0 1,6 0,25 1,6 0,25 1,6 Z13-A 44 24 13 - 0,530
FPM

TERMINAL CONNECTION NUMBER - FRONT VIEW POSITION

You might also like