SHELTERA CONSULTANTS PVT. LTD.
DESIGN REPORT
FOR
PROPOSED FACTORY BUILDING
AT
ARZI NO.-623, RAKUA NO.-2640,
BAKA MAUJA SHAHPUR, TAPA KASRA,
PARGANA HAVELI, THE. SADAR,
DISTT.- GORAKHPUR.
CLIENT :
M/S BHARTI INFRATEL LTD.
ENGINEERING CONSULTANT
SHELTERA CONSULTANTS PVT LTD.
74 (First Floor), SOUTH PATEL NGAR MARKET,
NEW DELHI- 110008, INDIA
TEL : 011- 47502201-10, FAX : 011-25840883
Email : corporate@[Link]
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
DESIGN OF PORTAL FRAMES :
A) GEOMETRICAL PARAMETERS :
Portal span = 24 m C/c
Columns Spacing = 6 m C/c
length of the Building = 72 m
Height of Building = 14.5 m
Roof Slope = 1 in 5
B) CALCULATION OF DEAD LOAD :
Follwing loads are considered on the Roof Truss :
(i) Sheeting = 14.50 Kg/m^2
(ii) Purlin = 11.70 Kg/m^2
(iii) Bracing = 6.00
(iv) insulation = 0.00
TOTAL = 32.20 Kg/m^2
Therefore the member Load on main Frame :
Dead Load UDL = 1.90 KN/m
CALCULATION OF LIVE LOAD :
As per IS:875 (Part 2 ) - 1987, Table 2
Assuming No access is provided to Roof :
LL = 0.75- 0.02 (ø-10)
ø = 11.31 Degree
i.e LL = 0.7238 KN/m^2
= 73.79 Kg/m^2
LL UDL on Frame = 4.35 KN/m
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
C) CALCULATION OF WIND LOAD :
Basic Wind Speed (Vb) : 170 Kmph i.e 47 m/Sec
Design wind Speed (Vz) = Vb x K1 x K2 x K3
Where
K1 = Probability factor (Risk Cofficient )
= 1
K2 = Terrian Height and Structure Size Factor
for Category = 2
Class = C
= 0.97
K3 = Topography factor
= 1
Vz = 47 x 1 x 0.97 x 1
45.59 m/Sec
Design Wind Pressure (Pz) = 0.6 x Vz2
= 1247.069 N/m^2
= 127.1222 kg/m^2
Pz = 128 kg/m^2
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
24.00 m
72.00 L/w = 3
h/w = 0.604
Slope : 1in5
ø = 11.31
14.5
24.00 m
* Note : All Dimension are in Metre
INTERNAL PRESSURE COFFICIENT :
INTERNAL PRESSURE COFFICENT
5% of wall Opening ± 0.2
5 to 20% Wall Opening ± 0.5
More than 20 % ± 0.7
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
Assuming opening in wall > 20 %
Cpi = ± 0.7
EXTERNAL PRESSURE COFFICIENT :
1) EXTERENAL PRESSURE COFFICIENT FOR ROOF & WALL :
1.1 0.6 0.6 1.1
0.7 0.3 0.3 0.7
Wind L to R Wind L to R
0.8 0.8
0.5 0.5
Wind Gable
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
RESULTANT PRESSURE COFFICIENT :
Cp (result) = Cpe - Cpi
Wind L to R ( Suction) Wind L to R ( Pressure) :
0.4 -0.1 1.8 1.3
1.4 -0.4 0 1
Wind R to L ( Suction) Wind R to L ( Pressure) :
-0.1 0.4 1.3 1.8
-0.4 1.4 1 0
Wind Gable ( Suction ) Wind Gable (Pressure) :
0.1 0.1 1.5 1.5
-0.2 -0.2 1.2 1.2
SHELTERA CONSULTANTS PVT. LTD. Doc No.
Structural Engineers & Project Management ConsultantsDate
74 ( Ist Floor), South Patel Ngr. Mkt., New Delhi-110008 Design By
Project Name : Check By
WIND LOAD ON ROOF AND SIDE WALL : (KNS/M)
Wind L to R ( Suction) Wind L to R ( Pressure) :
3.00 -0.750 13.47 9.73
10.48 -3.00 0 7.49
Wind R to L ( Suction) Wind R to L ( Pressure) :
-0.750 3.00 9.73 13.47
10.48 10.48 7.49 56.05
Wind Gable ( Suction ) Wind Gable (Pressure) :
0.75 0.75 11.23 11.23
-1.5 -1.5 8.98 8.98
STAAD PLANE
UNIT MET KNS
* PROECT NAME
* DESIGN BY
* DATE
JOI COO
1 0.00 0 0.00
2 0.00 14.50 0.00
3 12.00 16.90 0.00
4 24.00 16.90 0.00
5 24.00 0.00 0.00
MEM INCI
1 1 2
2 2 3
3 4 3
4 5 4
MEM PROPERTIES
1 2
CONSTANTS
DEN STEEL ALL
E SELL ALL
POI STEEL ALL
SUPPORTS
1 5 PINNED
*******************************************
LOAD 1 DEAD LOAD
SELFWEIGHT
MEM LOAD
2 3 UNI GY -1.9
LOAD 2 LIVE LOAD
MEM LOAD
2 3 UNI Y -4.35
LOAD 3 WIND LOAD L TO R (SUCTION)
MEM LOAD
1 UNI GX 1.4
4 UNI GX -0.4
2 UNI Y 0.4
3 UNI" Y -0.1
LOAD 4 WIND LOAD L TO R (PRESSURE)
MEM LOAD
1 UNI GX 0
4 UNI GX 1
2 UNI Y 1.8
3 UNI" Y 1.3
LOAD 5 WIND LOAD R TO L (SUCTION)
MEM LOAD
1 UNI GX -0.4
4 UNI GX 1.4
2 UNI Y -0.1
3 UNI" Y 0.4
LOAD 6 WIND LOAD L TO R (PRESSURE)
MEM LOAD
1 UNI GX 1
4 UNI GX 0
2 UNI Y 1.3
3 UNI" Y 1.8
LOAD 7 WIND GABLE (SUCTION)
MEM LOAD
1 UNI GX -0.2
4 UNI GX -0.2
2 UNI Y 0.1
3 UNI" Y 0.1
LOAD 8 WIND GABLE (PRESSURE)
MEM LOAD
1 UNI GX 1.2
4 UNI GX -1.2
2 UNI Y 1.5
3 UNI" Y 1.5
LOAD COMB 11 (DL + LL )
1 1 2 1
LOAD COMB 12 (DL + Wind L to R _SUCTION )
1 1 3 1
LOAD COMB 13 (DL + Wind L to R _PRESSURE )
1 1 4 1
LOAD COMB 14 (DL + Wind R to L _SUCTION )
1 1 5 1
LOAD COMB 15 (DL + Wind R to L _PRESSURE )
1 1 6 1
LOAD COMB 16 (DL + Wind GABLE_SUCTION )
1 1 7 1
LOAD COMB 17 (DL + GABLE Wind _PRESSURE )
1 1 8 1
LOAD COMB 18 (DL+LL+ Wind L to R_SUCTION)
1 0.8 2 0.8 3 0.8
LOAD COMB 19 (DL+LL+ Wind L to R_PRESSURE)
1 0.8 2 0.8 4 0.8
LOAD COMB 20 (DL+LL+Wind R to L_SUCTION)
1 0.8 2 0.8 5 0.8
LOAD COMB 21 (DL+LL+Wind R to L_PRESSURE)
1 0.8 2 0.8 6 0.8
LOAD COMB 22 (DL+LL+ Wind GABLE_SUCTION)
1 0.8 2 0.8 7 0.8
LOAD COMB 23 (DL+LL+ Wind GABLE_PRESSURE)
1 0.8 2 0.8 8 0.8
PER ANA
LOAD LIST 11 TO 23
PRINT SUPPORT REACTION
PRINT MEM FORCES
FINISH
IS : 875 (PART-3)
