Face Mask Ingredient Formulations
Face Mask Ingredient Formulations
Formula
B Preservative / / Preservative qs
* Please contact us to know in which country we are supplier of
SAFIC' Care is a trademark of SAFIC-ALCAN
GP2016PAN
SLEEP TIGHT
K-Beauty Overnight Mask
020.D8
Formula
SLEEP TIGHT
K-Beauty Overnight Mask
020.D8
Procedure
April 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
GP2016PAN
SLEEP TIGHT
K-Beauty Overnight Mask
020.D8
Formula
SLEEP TIGHT
K-Beauty Overnight Mask
020.D8
Procedure
April 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
FACE
BAMBOO GLOW 97,8%
of natural origin
GP2017INCOS
PURIFYING BLACK PEEL-OFF MASK
ingredients
OVERVIEW
SAFIC’ Care T A 80-400 gives the mask a smooth texture, and allows to use it as
a peel-off mask. SAFIC’ Care T GXG is used here to allow the suspension of
charcoal powder and natural mica. To use this product, apply on the skin the
black face mask and spray on it a little bit of the Calcium Chloride solution.
Remove it as a second skin and observe your glowing skin.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – July 2023.
FACE
BAMBOO GLOW 97,8%
of natural origin
GP2017INCOS
PURIFYING BLACK PEEL-OFF MASK
ingredients
OVERVIEW
SAFIC’ Care T A 80-400 gives the mask a smooth texture, and allows to use it as
a peel-off mask. SAFIC’ Care T GXG is used here to allow the suspension of
charcoal powder and natural mica. To use this product, apply on the skin the
black face mask and spray on it a little bit of the Calcium Chloride solution.
Remove it as a second skin and observe your glowing skin.
PROCESS PROPERTIES
GEL
APPEARANCE : Shiny black
PHASE A : Place under stirring.
gel.
PHASE B : Pre-mix then add it to phase A and stir for 30 min until
homogeneous.
VISCOSITY : 100 000 cPs
PHASE C : Stir until homogeneous then add it to phase AB and homogenize.
(Brookfield RVDV-I+, 5 rpm,
PHASE D : Add to phase ABC and homogenize.
1 min, spindle 6).
PHASE E : Pre-mix then add it to phase ABCD and homogenize.
Adjust pH to 5,5-6,5.
pH : 5,5 - 6,5.
CALCIUM CHLORURE SOLUTION
Phase A : Stir until dissolved.
Phase B : Add to phase B and homogenize.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – July 2023.
UK2018INCOS
DIGITAL SHIELD
2 in 1 moisturizer and mask
Formula
D Preservative
SymSave ® H (979940) Hydroxyacetophenone Booster 0,50
Anti-Oxidant
Cosmetic Color Red SYMRISE*
(656252) Aqua, C.I. 13015, C.I. 14720, C.I. 16035 Colour 0,10
1 % aqueous solution
E
Syoft (877428) Parfum Fragrance 0,20
Sumicos™ Silver Standard
SUDARSHAN* Mica, Titanium Dioxide Effect Pigment 0,10
(43133)
Sodium Hydroxide
F / Aqua, Sodium Hydroxide Neutralizer 0,66
30 % aqueous solution
* Please contact us to know in which country we are supplier of
UK2018INCOS
DIGITAL SHIELD
2 in 1 moisturizer and mask
Procedure
Phase A : Place under stirring until homogeneous.
Phase B : Pre-mix then add it to phase A. Heat phase AB to 75°C.
Phase C : Heat to 75°C until homogeneous then add it to phase AB under strong agitation and
homogenize.
Phase D : Add to phase ABC and allow to cool to below 40°C under stirring.
Phase E : Add ingredients one by one under stirring.
Phase F : Add to phase ABCDE. The formulation will thicken up at this stage.
June 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
GP2018INCOS
VOLCANIC VEIL
Purifying face mask
022.C25
Formula
®
Prestige Silver (35143) SUDARSHAN* Mica, Titanium Dioxide Additive 0,50
Aqua, Propanediol, Schisandra Chinensis
Urbalys ® GREENTECH* 1,00
D Fruit Extract Active
Ajidew ® NL-50 AJINOMOTO* Sodium PCA 0,50
Sebum
ImerCare™ 25P IMERYS* Perlite Absorbent 10,00
agent
E Mattifying
Naturesoft 800 Cellulose 1,00
MICRO agent
POWDERS* Exfoliating
®
Naturescrub H20 Hydrogenated Castor Oil 4,00
agent
* Please contact us to know in which country we are supplier of
Procedure
VOLCANIC VEIL
Purifying face mask
022.C25
Formula
®
Prestige Silver (35143) SUDARSHAN* Mica, Titanium Dioxide Additive 0,50
Aqua, Propanediol, Schisandra Chinensis
Urbalys ® GREENTECH* 1,00
D Fruit Extract Active
Ajidew ® NL-50 AJINOMOTO* Sodium PCA 0,50
Sebum
ImerCare™ 25P IMERYS* Perlite Absorbent 10,00
agent
E Mattifying
Naturesoft 800 Cellulose 1,00
MICRO agent
POWDERS* Exfoliating
®
Naturescrub H20 Hydrogenated Castor Oil 4,00
agent
* Please contact us to know in which country we are supplier of
Procedure
Formula
Procedure
Phase A : Add water in to the main mixing vessel and begin heating to 80°C. Add EDTA and mix
until dissolved. Add the humectants and Amaze® XT, one by one and mix for 15 minutes.
Phase B : Weigh out all ingredients of phase B and heat to 80°C. Add to phase A and homogenize
for 3 minutes.
Phase C : Add to phase AB while homogenizing. Mix until the mixture cools to 40°C.
Phase D : Add to phase ABC, one by one, homogenizing between additions. Homogenize once
again for 1 minute at 6000rpm.
Adjust pH to 4,5-5,5.
March 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
UK2019OTHERS
MATTIFYING CHARCOAL
FACE MASK
SAUK_127_B
Formula
MATTIFYING CHARCOAL
FACE MASK
SAUK_127_B
Procedure
Phase A : Add water into the main mixing vessel and begin heating to 80°C. Add EDTA and mix
until dissolved. Add the humectants and Amaze® XT, one by one and mix for 15 minutes.
Phase B : Weigh out all ingredients of phase B and heat to 80°C. Add phase B to phase A and
homogenise for 3 minutes.
Phase C : Add phase C to phase AB while homogenising. Mix until the mixture cools to 40°C.
Phase D : Add phase D to phase ABC, one by one, homogenising between additions.
Homogenise once again for 1 minute at 6000rpm.
Adjust pH to 4,5-5,5.
July 2021
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
UK2019OTHERS
MATTIFYING CHARCOAL
FACE MASK
SAUK_127_B
Formula
MATTIFYING CHARCOAL
FACE MASK
SAUK_127_B
Procedure
Phase A : Add water into the main mixing vessel and begin heating to 80°C. Add EDTA and mix
until dissolved. Add the humectants and Amaze® XT, one by one and mix for 15 minutes.
Phase B : Weigh out all ingredients of phase B and heat to 80°C. Add phase B to phase A and
homogenise for 3 minutes.
Phase C : Add phase C to phase AB while homogenising. Mix until the mixture cools to 40°C.
Phase D : Add phase D to phase ABC, one by one, homogenising between additions.
Homogenise once again for 1 minute at 6000rpm.
Adjust pH to 4,5-5,5.
July 2021
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
FACE
MERMAID TEARS 97,1%
of natural origin
GP2019INCOS
FACE MASK UNIDOSE
ingredients
OVERVIEW
What a funny texture you might say ? Yes, but a little bit tricky to obtain ! Based
on a molecular cooking method, this mask is made of two gels. The gel inside is
obtained thanks to SAFIC’ Care T GXG which allows the suspension of the
absorbing powder ImerCare® 03D and the effect pigments. The envelope is
made with SAFIC’ Care T A 80-400 which allows to create a strong but flexible
film when in combination with a Calcium Chlorure solution. To use this mask,
gently press one bead in your palm until breaking the shell and apply the
iridescent gel onto your skin. After a few minutes remove the mask with a
cotton pad and water.
B Thickener &
Cyamopsis Tetragonoloba Gum,
SAFIC' Care T GXG SAFIC-ALCAN suspensive 1,20
Xanthan Gum
agent
A-Leen® 5 MINASOLVE* Pentylene Glycol Solubilizer 3,00
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material - July 2023.
FACE
MERMAID TEARS 97,1%
of natural origin
GP2019INCOS
FACE MASK UNIDOSE
ingredients
OVERVIEW
What a funny texture you might say ? Yes, but a little bit tricky to obtain ! Based
on a molecular cooking method, this mask is made of two gels. The gel inside is
obtained thanks to SAFIC’ Care T GXG which allows the suspension of the
absorbing powder ImerCare® 03D and the effect pigments. The envelope is
made with SAFIC’ Care T A 80-400 which allows to create a strong but flexible
film when in combination with a Calcium Chlorure solution. To use this mask,
gently press one bead in your palm until breaking the shell and apply the
iridescent gel onto your skin. After a few minutes remove the mask with a
cotton pad and water.
®
Salixin Organic ®
Trade Yuzu Ceramide B Biotylis ®
GenoWhite™ Ajidew NL-50
Extract-800NP
Name (1%) (2%) (1%) (1%)
(0,2%)
Active
Aqua,
I.N.C.I. Butylene Glycol, Aqua, Citrus Junos Salix Purpurea Acetyl Glycyl Beta- Sodium PCA,
Lactobacillus
Name Fruit Extract Bark Extract Alanine Aqua
Ferment Lysate
Supplier ICHIMARU PHARCOS* GREENTECH* SALIX IN* CORUM* AJINOMOTO*
Bamboo ® ® ®
Sumicos™ ® Prestige Prestige Prestige
Trade Charcoal SynCrystal Jade
Arctic Flare Bright Gold Rose Gold Sapphire
Name PhytMic (1%)
(0,5%) (1%) (1%) (1%)
Coating Color
(1%)
Synthetic
Synthetic Mica, CI 77891,
I.N.C.I. Fluorphlogopite, Mica, CI 77891,
Charcoal Powder Fluorphlogopite, Mica, CI 77891 Tin Oxide, Ferric
Name CI 77891, CI Carmine
CI 77891 Ferrocyanide
77492, Tin Oxide
PROCESS
MASK
PROPERTIES
PHASE A : Place under stirring.
PHASE B : Pre-mix then add it to phase A and stir for 30 min until homogeneous. APPEARANCE : Colored
PHASE C : Pre-mix then add it to phase AB and homogenize. beads with thick mask
PHASE D : Pre-mix then add it slowly to phase ABC and stir until homogeneous. inside.
PHASE E : Add it to phase ABCD and homogenize.
Adjust pH to 5,0-7,0. Pour into a small round-shaped mold and freeze it. VISCOSITY : N/C.
COATING
PHASE A : Place under stirring. pH : 5,0 – 7,0.
PHASE B : Pre-mix then add it to phase A and stir for 15 min until homogeneous.
PHASE C : Pre-mix then add it to phase AB and homogenize.
Adjust pH to 5,0-7,0.
ASSEMBLY
Bath the frozen pearls into a 5% CaCl2 solution for a few minutes, remove the
excess solution then place them into the coating phase for 20 min.
Let them rest on a grid.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material - July 2023.
UK2019OTHERS
Formula
Procedure
Phase A : Add water in to the main mixing vessel and begin heating to 80°C. Add EDTA and mix
until dissolved. Add the humectants and Amaze® XT, one by one and mix for 15 minutes.
Phase B : Weigh out all ingredients of phase B and heat to 80°C. Add phase B to phase A and
homogenise for 3 minutes.
Phase C : Add phase C to phase AB while homogenising. Mix until the mixture cools to 40°C.
Phase D : Add phase D to phase ABC, one by one, homogenising between additions.
Homogenise once again for 1 minute at 6000rpm.
Adjust pH to 4,5-5,5.
March 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
UK2019OTHERS
Formula
Procedure
Phase A : Add water in to the main mixing vessel and begin heating to 80°C. Add EDTA and mix
until dissolved. Add the humectants and Amaze® XT, one by one and mix for 15 minutes.
Phase B : Weigh out all ingredients of phase B and heat to 80°C. Add phase B to phase A and
homgenise for 3 minutes.
Phase C : Add phase C to phase AB while homogenising. Mix until the mixture cools to 40°C.
Phase D : Add phase D to phase ABC, one by one, homogenising between additions.
Homogenise once again for 1 minute at 6000rpm.
Adjust pH to 4,5-5,5.
March 2020
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith. We
assume no responsability for the choice of such raw materials and final compostion which are marketed by our customers, even if as they may contain one or more of our
products. Safic-Alcan expressly disclaims any implied warranty of fitness for a particular use. We recommend to our customer to check with appropriate authorities the regulatory
status of the raw material.
BODY
TEXTURE BAR 99,9%
of natural origin
GP2020TEXTUREBAR
2% SAFIC’ CARE T A 80-400
ingredients
OVERVIEW
SAFIC’ Care T A 80-400 is a cold-processable suspensive and thickening agent
which gives clear gels. In presence of calcium ions, it reacts to create a firm
texture perfectly adapted for peel-off masks and patch textures.
PROCESS PROPERTIES
GEL APPEARANCE : Clear purple
PHASE A : Place under stirring. fluid gel.
PHASE B : Pre-mix, add it to phase A and stir for 15 min until homogeneous.
PHASE C : Add it to phase AB and homogenize. VISCOSITY : 3 200 cPs
Adjust pH to 5,5-6,5. (Brookfield RVDV-I+, 5 rpm,
1 min, spindle 3).
CALCIUM CHLORIDE SOLUTION
PHASE A : Stir until dissolved. pH : 5,5 – 6,5.
PHASE B : Add to phase B and homogenize.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – November 2023.
BODY
TEXTURE BAR 99,9%
of natural origin
GP2020TEXTUREBAR
2% SAFIC’ CARE T A 80-400
ingredients
OVERVIEW
SAFIC’ Care T A 80-400 is a cold-processable suspensive and thickening agent
which gives clear gels. In presence of calcium ions, it reacts to create a firm
texture perfectly adapted for peel-off masks and patch textures.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – November 2023.
FACE
SUN’S OUT 97,9%
of natural origin
GP2022SEPAWA
ENERGIZING MASK
ingredients
029.D11
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Ecoceramides® LCS brings skin deep
moisturization while NatPure® Xtra Vitality features anti-pollution benefits.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2022.
FACE
SUN’S OUT 97,9%
of natural origin
GP2022SEPAWA
ENERGIZING MASK
ingredients
029.D11
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Ecoceramides® LCS brings skin deep
moisturization while NatPure® Xtra Vitality features anti-pollution benefits.
PROCESS PROPERTIES
PHASE A : Place hot water under stirring. APPEARANCE : Thick yellow
PHASE B : Pre-mix then add it to phase A and heat up to 85°C under stirring cream.
for 15min until homogeneous.
PHASE C : Heat up to 85°C under stirring until homogeneous. VISCOSITY : 42800 cPs
Under high stirring add it to phase AB and homogenize. (Brookfield RVDV-I+, 5 rpm,
Let cool down to 60°C then add a water bath to cool down to 40°C. 1 min, spindle 6).
Add ice to cool down to 25°C.
PHASE D : Add to phase ABC and homogenize. pH : 5,5 - 6,5.
PHASE E : Stir until dissolved then add it to phase ABCD and homogenize.
Complement with water, homogenize and adjust pH to 5,5 - 6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material - October 2022.
FACE
VIOLET MIND 97,1%
of natural origin
GP2022SEPAWA
ANTI-STRESS MASK
ingredients
029.D12
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Lava-Dermabiotics brings effective
moisturization while NatPure® Xtra Vitality features anti-itching benefits.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2022.
FACE
VIOLET MIND 97,1%
of natural origin
GP2022SEPAWA
ANTI-STRESS MASK
ingredients
029.D12
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Lava-Dermabiotics brings effective
moisturization while NatPure® Xtra Vitality features anti-itching benefits.
PROCESS
PROPERTIES
PHASE A : Place hot water under stirring.
PHASE B : Pre-mix then add it to phase A and heat up to 85°C under stirring APPEARANCE : Thick lilac
for 15min until homogeneous. cream.
PHASE C : Heat up to 85°C under stirring until homogeneous.
Under high stirring add it to phase AB and homogenize. VISCOSITY : 48320 cPs
Let cool down to 60°C then add a water bath to cool down to 40°C. (Brookfield RVDV-I+, 5 rpm,
Add ice to cool down to 25°C. 1 min, spindle 5).
PHASE D : Add to phase ABC and homogenize.
PHASE E : Add to phase ABCD and homogenize. pH : 5,5 – 6,5.
Complement with water, homogenize and adjust pH to 5,5 - 6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2022.
FACE
WRINK’ AWAY 98,1%
of natural origin
GP2022SEPAWA
ANTI-AGEING MASK
ingredients
029.D13
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Adeplump has a plumping activity on adipocytes
for a youthful appearance while COLinus brings anti-wrinkle and wound
healing benefits.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2022.
FACE
WRINK’ AWAY 98,1%
of natural origin
GP2022SEPAWA
ANTI-AGEING MASK
ingredients
029.D13
OVERVIEW
The texture of this mask is obtained thanks to Covagel for its thickening
effect and SAFIC’ Care T XG 80 for its suspending power. The green
emulsifiers Sabowax PG4S and Sabowax PG6L MB, combined to Sabosoft RW
and rich oils such as Sabosoft RBO and Neossance® Squalane give a rich
creamy texture to this mask. Adeplump has a plumping activity on adipocytes
for a youthful appearance while COLinus brings anti-wrinkle and wound
healing benefits.
PROCESS
PROPERTIES
PHASE A : Place hot water under stirring.
PHASE B : Pre-mix then add it to phase A and heat up to 85°C under stirring APPEARANCE : Thick pink
for 15min until homogeneous. cream.
PHASE C : Heat up to 85°C under stirring until homogeneous.
Under high stirring add it to phase AB and homogenize. VISCOSITY : 63920 cPs
Let cool down to 60°C then add a water bath to cool down to 40°C. (Brookfield RVDV-I+, 5 rpm,
Add ice to cool down to 25°C. 1 min, spindle 5).
PHASE D : Add to phase ABC and homogenize.
PHASE E : Add to phase ABCD and homogenize. pH : 5,5 – 6,5.
Complement with water, homogenize and adjust pH to 5,5 - 6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – October 2022.
FACE
SLEEP WELL 96,6%
of natural origin
GP2023SEPAWA
ACTIVE CONCENTRATED NIGHT MASK
ingredients
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – November 2023.
FACE
SLEEP WELL 96,6%
of natural origin
GP2023SEPAWA
ACTIVE CONCENTRATED NIGHT MASK
ingredients
PROCESS PROPERTIES
PHASE A : Place under stirring until homogeneous. APPEARANCE : White thick
PHASE B : Pre-mix then add it to phase A and stir for 15 minutes until cream.
homogeneous.
PHASE C : Add it to phase AB and homogenize. VISCOSITY : 114 000 cPs
PHASE D : Add it to phase ABC and homogenize for 5 minutes under strong (Brookfield RVDV-I+, 5 rpm,
stirring. 1 min, spindle 6).
PHASE E : Pre-mix then add it to phase ABCD and homogenize.
PHASE F : Pre-mix then add it to phase ABCDE and homogenize. pH : 5,5 - 6,5.
PHASE G : Stir until dissolved then add it to phase ABCDEF and homogenize.
Adjust pH to 5,5-6,5.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – November 2023.
BODY
TEXTURE BAR 99,9%
of natural origin
GP2024TEXTUREBAR
2% SAFIC’ CARE T A 80-400
ingredients
OVERVIEW
SAFIC’ Care T A 80-400 is a cold-processable thickening agent which gives
clear gels. In presence of calcium ions, it reacts to create a firm texture
perfectly adapted for peel-off masks and patch textures.
PROCESS PROPERTIES
GEL APPEARANCE : Clear blue
PHASE A : Place under stirring. fluid gel.
PHASE B : Pre-mix, add it to phase A and stir for 15 min until homogeneous.
PHASE C : Add it to phase AB and homogenize. VISCOSITY : 3480 cPs
Adjust pH to 5,5-6,5. (Brookfield RVDV-I+, 5 rpm,
1 min, spindle 3).
CALCIUM CHLORIDE SOLUTION
PHASE A : Stir until dissolved. pH : 5,5 – 6,5.
PHASE B : Add to phase B and homogenize.
Our customers are responsible for the choice of raw materials they incorporate into their formulas. The information contained in our documentation are given in good faith.
We recommend to our customer to check with appropriate authorities the regulatory status of the raw material – July 2024.