Sandvik DPi series

Break the limits

Sandvik Mining and Construction

Sandvik
DPi series
Construction and
Surface Mining
drill rig
Hole range:
76 – 152 mm

Sandvik Mining and Construction

The route to
superior performance

1986 1989 1992 1998

DHA 1000 DHA 1000S CHA 1100 PANTERA 1500

Sandvik Mining and Construction

The route to
superior performance

2007
DPi
„ A result of 20 years of experience in
quarrying and open pit mining
„ 6 years of experience including
extensive testing in the new control
system

Sandvik Mining and Construction

DPi series
Applications
Production drilling Quarry / mine development

Presplitting De-watering

Sandvik Mining and Construction

DPi Series
surface mines and quarries
DPi Series technical data

DP800i DP900i DP1100i DP1500i

Recommended hole 76 – 127 mm 89 – 127 mm 89 – 140 mm 102 – 152 mm

diameter 3” – 5” 3½” – 5” 3½” – 5½” 4” – 6”
Drill rod / tube 45, 51 mm 51, 60 mm 51, 60, 87mm 51, 60, 87, 96 mm
diameters 1¾”, 2” 2”, 2 3/8” 2”, 2 3/8”, 3½ 2”, 2 3/8”, 3½”, 3¾”

Hydraulic rock drill HF 800T HL 1060T HL 1060T HL 1560T

Percussion output 21 kW 21 kW 25 kW 33 kW
power 28 hp 28 hp 34 hp 44 hp

Engine type Caterpillar C9 Caterpillar C9 Caterpillar C9 Caterpillar C11

Engine output 205 kW / 1800 rpm 205 kW / 1800 rpm 225 kW / 1800 rpm 261 kW / 1800 rpm
power 275 hp / 1800 rpm 275 hp / 1800 rpm 302 hp / 1800 rpm 350 hp / 1800 rpm
9,6 m³ / min 9,6 m³ / min 14 m³ / min 14 m³ / min
Flushing air capacity
335 cfm 335 cfm 490 cfm 490 cfm

Operator cabin Ergo Cool Ergo Cool Ergo Cool Ergo Cool

Certificate ROPS and FOPS ROPS and FOPS ROPS and FOPS ROPS and FOPS

Sandvik Mining and Construction

DPi series
Brings out the best in every driller
UserInterface
User Interface

Sandvik Mining and Construction

DPi series
Brings out the best in every driller
Feed pressure
Easy to adjust Percussion pressure
Rotation speed
„ All parameter settings in the cabin
„ Several factory preset drilling
parameters for different rock
conditions
„ Allows operator to tune and store
optimal parameters for each site
„ Easy return to pre-settings
„ Drill bit RPM, penetration rate and
hole depth

Sandvik Mining and Construction

DPi series
Brings out the best in every driller

Hard rock Soft rock Fragmented rock

Drilling control components
200

180

„ Torque control provides smooth

rotation and good rock contact 160

140
„ Self-adjusting power level according
to penetration rate 120

100
„ Feed-percussion follow-up for
maximum penetration rate 80

60

40
Selectable auto-collaring Feed pressure
Rotation pressure
20 Torque reference
Penetration rate
„ Collaring -> ramp -> full power 0
Percussion pressure

0 10 20 30 40 50 60 70 80 90 100
time

Sandvik Mining and Construction

DPi series
Brings out the best in every driller

Standard drilling result

„ One hole automatic drilling to depth
(option)

More drilling time

„ Automatic feed alignment (option)
„ Satellite based hole navigation ( option )

Sandvik Mining and Construction

DPi series
Brings out the best in every driller

Productive operation from day one

„ Simulator-based training concept

Productivity

Contractor benefit
Training
before
start No training before
start

Machine delivery Time

Sandvik Mining and Construction

DPi series
Simple machine care
More drilling time
„ All daily and weekly maintenance points accessible from
ground level
„ Centralized oil removals
„ Gull type service doors

Sandvik Mining and Construction

DPi series
Simple machine care

Service-friendly component layout

Sandvik Mining and Construction

DPi series
Simple machine care

Continuous performance in any temperature

„ Oversized coolers
„ Fuel cooler
„ Ambient-controlled oil cooler fans
„ Long cleaning interval due to extra
capacity
„ Derating at maximum operating
temperature instead of shut down

Sandvik Mining and Construction

DPi series
Simple machine care

Trouble shooting made easy

„ Self diagnostics system -
fault finding by excluding
functioning circuits one by
one
„ Step by step trouble
shooting instructions

Sandvik Mining and Construction

DPi series
Simple machine care

Simple hydraulics
„ Hydraulics used only for power
transmission
„ No computer features in hydraulics
„ Well-organized and reduced hosing
„ Short hoses with use of bulkheads
„ Steel piping when feasible

Sandvik Mining and Construction

DPi series
Simple machine care

Strong, self cleaning track frames

„ V-shape track frame
„ Less parts in roller mounting

Sandvik Mining and Construction

DPi series
Safety

Excellent stability
„ Low center of gravity (CG)
„ CG optimized close to oscillation axle
- balance remains almost unchanged,
when oscillation is opened
„ Warning if oscillation is locked or rear
jack is down when tramming mode is
activated
„ Wide tracks

Sandvik Mining and Construction

DPi series
Safety and Environment

„ Low fuel consumption

− Load sensing compressor pressure
control
− Ambient control of oil cooler fans
− Active engine RPM control
− Optimum diesel rpm level
(1800 rpm)

„ 15 % drop compared to DP series

− 100 tons less CO2 emissions at
7500 engine hours

Sandvik Mining and Construction

DPi series
Safety and Environment

Efficient dust control

„ Full time suppression system
for visible dust
(patented option)

„ Controlled dust removal

− less visible dust

Sandvik Mining and Construction

DPi series
Daily drilling comfort

„ FOPS/ROPS certified safety

cabin
„ Excellent visibility
„ Pressurized
„ Efficient filtration for incoming
and re-circulating air
„ Safety grill, easy and safe to
open for window cleaning

Sandvik Mining and Construction

DPi series
Daily drilling comfort
„ Efficient A/C
„ Selective glass windows
„ Roller shutter (option)
„ Double roof
„ Quiet
„ Cabin suspension and mounting
eliminates vibrations
„ Vacuum cleaner (option)
„ Cooler bag (option)
„ Storage for tools, bits and shanks

Sandvik Mining and Construction

DPi series
More production with less cost

„ Stabilizer rock drills HF800T, HL1060T

and HL1560T
„ Drilling tools T45, T51, GT 60, ST 68
tubes covering 76 – 152 mm (3”- 6”) hole
range
„ Fuel tank capacity 680 liters (180 Gal)
allows for two shift operation
„ Powerful tramming and wide track plates

Sandvik Mining and Construction

 DPi series
Contributes to the whole excavation process

SanRemo, a web-based reporting system*

„ Production
− drilled meters
− drilled holes
− engine hours
− percussion hours
− fuel consumption
„ Condition monitoring
− temperatures
− pressures
„ Rig location
„ Service requirement forecast
* option

Sandvik Mining and Construction

DPi series
Standard delivery
1. Rock drill HF 800T, HL1060T or HL 1560T, hydraulic
2. Feed LF1520
3. Rod changer RC 1614
4. Boom ZB1550H, telescopic
5. Carrier FL 6, oscillating
6. Powerpack Diesel driven, hydraulic pumps and on-board compressor
7. Hydraulic system Electric load sensing
8. Control system THC Pro with Rock Pilot
9. Operators cabin Ergo cool
10. Dust collector DC1550, hydraulic
11. Working lights 15 pcs
12. Gauge set For accumulator pressure checking
13. Reversing alarm
14. Movable drill steel support
15. Suction shut down for water holes
16. Flushing control automatics
17. Shank replacement tools
18. Manuals Service and spare parts manuals
1 x paper copy
1 x CD-ROM ( ToolMan )

Sandvik Mining and Construction

DPi series
Options

1. Automatic feed alignment 26. Sandvik central lubrication system

2. Feed alignment instrument for vertical holes and hole depth measuring 27. Antifreeze for air lines
3. Feed alignment instrument for inclied holes and hole depth measuring 28. Towing hook
4. Laser based depth measuring system 29. Hydraulic ground support HM 75
5. One hole automatic drilling to depth with remote stop (includes hose reel) 30. Horizontal drilling support
6. SanRemo remote monitoring system 31. Feed support for soft ground
7. Radio remote for tramming and boom movements 32. Electric filling pump for refuelling
8. Hydraulic winch with radio remote control for winch/ tramming 33. Fast fill connection for fuel and water tanks
and boom movements 34. Fast fill connection for engine coolant, hydraulic oil, engine oil
9. Standard feed with hose reel 35. Sanrock Mini H hydraulic bit grinder
10. Hose reel (includes longer feed for 6100 mm (20') starter rod) 36. Manual fire suppression system
11. Air conditioning and heating 37. Automatic fire suppression system (for hot climate only)
12. Vacuum cleaner for cabin 38. Sampling device
13. Radio and CD player 39. Reversing camera (two cameras)
14. Cooler bag 40. Single bar grouser plates (310 mm)
15. Roller shutter for cabin windows 41. Guides for grousers
16. Xenon lights 9 pcs 42. Kit for alternative steels
17. Fuel heater for cabin, hydraulic oil and engine 43. Tube drilling kit
18. Power extractor 44. Extra manuals
19. Readiness for Power extractor 45. First service kit for DPi
21. Water injection system 46. Special tools for rock drill, field tool set
22. Flap feeder for dust collector 47. Special tools for rock drill, complete set
23. Dustmizer (includes water injection system and flap feeder)
24. Rod greasing
25. Rod greasing with 5 gallons bucket

Sandvik Mining and Construction

Break
the limits

Excavation Daily drilling

process comfort
reporting

High
Simple
productivity
machine care
Low costs

Sandvik Mining and Construction