Kothari's KOTHARI CORROSION CONTROLLERS
FACTORY : PLOT NO.: 63, G. V. M.M.A. ESTATE, ODHAV, AHMEDABAD - 382 415. INDIA.
PHONE : +91 - 79 - 22902525, 22902626, 22902828, MOBILE NO.: +91 - 98250 06626,
WEBSITE : www.acidprooftiles.com, EMAIL : [email protected], [email protected]
:: MSDS # Material Safety Data Sheet ::
Furan Resin base Mortar is Two Component system. It consists of Furane Solution & Furane
Powder. The advantage of this product is its versatility in terms of its strength, chemical resistance and
self life. The above two components when mixed in the proper mixing ratio, forms a mixture like cement
mortar which is used to Filled-up Gapes / Joints between applied Acid Proof Tiles or Bricks.
Furane Resin base Mortar meets IS - 4832 Part – II.
Use :
Brick / tile based on Furane Mortar is recommended for severe corrosive conditions as in reaction
vessels, storage tanks, neutralization pits, drains, floors and other areas.
Furane Mortar is used in different industries like steel, dyestuff, Metal finishing, Thermal Power Plants,
Fertilizers, Petrochemicals, Food processing, Beverages, Breweries, Dairies etc.
For severe corrosive conditions Furane Mortars is major used for bedding and jointing of tile / bricks
and for less severe conditions, it is used as a pointing material along with silicate cement as the bedding
material.
Physical Data :
Mixing Ration : Solution : Powder : (parts by weight) 1:3
Color Black
Density (kg / M³) 1700 - 1850
0
Working Time at 27 +2 C (Minutes) 20
Setting Time at 24 +20 C (Hours) 8 to 12 Hours
Properties :
PROPERTY UNIT VALUE (7DAYS)
Flexural Strength, minimum Kg / Cm² 90
Compressive Strength, min Kg / Cm² 450
Bond Strength with Acid Proof Bricks, Kg / Cm² 13
Minimum
Water Absorption, max. % 0.8
Temperature Resistance, Max. ºC 190
Kothari's KOTHARI CORROSION CONTROLLERS
FACTORY : PLOT NO.: 63, G. V. M.M.A. ESTATE, ODHAV, AHMEDABAD - 382 415. INDIA.
PHONE : +91 - 79 - 22902525, 22902626, 22902828, MOBILE NO.: +91 - 98250 06626,
WEBSITE : www.acidprooftiles.com, EMAIL :
[email protected],
[email protected]Directions for Use :
On the bare Furane Mortar should not be applied. It is recommended that a suitable membrane is
provided on the substrate and over this acid proof brick/ tile lining is done using Furane Mortar.
For preparing the mortar Furane Solution is taken in a clean Vessel and proportionate quantity of Furane
Powder is added and mixed thoroughly till a lump free, butter like consistency mortar is obtained.
Mixing ratio of powder can be slightly changed (+/- 10%) to suit the site conditions. The mixing ratio
between the syrup and Activator should not be changed.
Since the pot life of the mortar is short, only small quantity of mortar which can be used within the
workable time is mixed. The prepared mortar is placed on the back and on the sides of carbon / Acid
proof brick and pressed firmly over the suitable membrane so that bedding is uniform.
In the case of pointing situations, the mortar is filled to the entire depth up to which the jointing material
is racked out. The surplus material is removed from the joint carefully without smearing onto the tile
surface.
After curing for period of 72 Hours at an ambient temperature the lining can be put into operation.
Chemical Resistance :
Furane Mortar, at room temperature, has resistance to wide range of acids including Hydrochloric acid,
Alkalis solvents including halogenated types, and salt solutions except those of the oxidizing type. It is
not recommended for services to oxidizing chemicals like Chronic acid, Nitric Acid etc. For details of
chemical resistance to specific conditions, please contact us.
Packing :
FURANE Powder : 50 Kg. Bag
FURANE Solution : 25 Kg. Drum or 50 Kg. Carbo or 240 Kg. or 250 Kg. Drum
Transportation:
During transport containers must be protected from contact with water and should not be exposed
directly to sunlight. Syrup and Activator shall always be kept apart to void exothermic reaction between
the two.
Storage & Shelf Life :
Furane powder & solution should be kept in a cool and dry place in tightly closed condition, away from
moisture, heat and direct sunlight. For safety reasons always ensure that both are Stored away from
each other.
SHELF LIFE : Shelf life at 20 Deg. C at ambient temp.
Powder 10 Months 10 Months
Syrup 10 Months 10 Months
In case if the ambient temperature is more than 30-35 Deg. C, the shelf life of the above materials will
get reduced accordingly.
Kothari's KOTHARI CORROSION CONTROLLERS
FACTORY : PLOT NO.: 63, G. V. M.M.A. ESTATE, ODHAV, AHMEDABAD - 382 415. INDIA.
PHONE : +91 - 79 - 22902525, 22902626, 22902828, MOBILE NO.: +91 - 98250 06626,
WEBSITE : www.acidprooftiles.com, EMAIL :
[email protected],
[email protected]Handling Precautions :
Since the odour emanating from the Syrup and from prepared mortar is irritating, it is important that the
workplace be provided with adequate ventilation. Contact with skin should be avoided, since it causes
irritation / itching. It is recommended that barrier cream be applied before handling FURANE mortar in
case of contact with skin it is washed with soap and plenty of water. If FURANE Syrup / Activator
splashes in to the Eye, in said Case Eyes should be washed with plenty of water and medical advices is
sought.
# KOTHARI CORROSION CONTROLLERS strives to ensure that any Advice or information or
recommendations given are appropriate and correct. However, we can not accept any liability directly or
indirectly arising out of the use of the products. since the method of usages and place & application of
the product may be beyond our control.
