INDEX
S. No. Description Page
1 Intake well cum Pump house 2
2 Raw Water Pumping Main 2
3 Raw Water Pumping Equipment Phase-1 3
3 Raw Water Pumping Equipment Phase-2 3
Annex – 1 Design of Intake well and inlet ports -2045 4
Annex – 2 Design of Economical design of Raw Water Pumping Main -2035 6
Annex – 3 Design of Economical design of Raw Water Pumping Main -2045 9
Annex – 4 Surge calculations 12
Annex – 5 Design Raw Water Pumping Equipments Phase-1 13
Annex – 6 Design Raw Water Pumping Equipments Phase-2 14
Drawing Index
S. No. Name of Drawing Drawing Number
Schematic diagram of Intake well & Pump House with MPJNM/WPIL/1000072/MECH/
1
Approach Bridge & Raw water pumping main BE/000141
2
BANSAGAR
MULTI VILLAGES RURAL WATER SUPPLY SCHEME
DISTT. SHAHDOL, M.P.
A REPORT ON
HYDRAULIC DESIGNS OF DIFFERENT UNITS
INTAKE WELL CUM PUMP HOUSE
As per the agreement, the Intake well of 8 m diameter 28 m high is to be provided for ultimate
capacity in the submergence of the Dam, for 16.65 mld raw water in the design period of 30
years including wastage in the treatment.
The criteria of selection of the hydraulics is as below-
The scour depth for the intake well is not considered as the water is to be drawn from the
stagnant water of the dam. However sufficient depth of excavation has been considered for the
safety of the structure. The Ground Level at the location of intake well is 334.97 m and the
foundation level is provided at 318.0 m. MWL of the dam is 342.93 m, hence the Pump Floor
Level is adopted as 344.50 m. The details of different levels and capacities available in the dam
are as below-
FRL 341.64 m Capacity 6139.64 MCM
MDDL 323.10 m Capacity 718.50 MCM
Lowest Port 320.00 m Capacity 422.03 MCM
The available capacity at lowest port level is much more than the Demand of 2045 and
evaporation & other losses. The details of different levels are given in Annex-1 attached.
The level of the approach bridge and pump floor is kept above MWL and 6.0 m height of pump
house is provided as per agreement and thus the height of intake well cum pump house is worked
out as 32.50 m above base of the well. The length of the Approach Bridge at Pump Floor Level
works out to be 20 m, hence 4 m wide approach bridge of 20 m length would be provided
The size of the intake well should have adequate capacity to house four vertical turbine pump
sets, capable to supply 16.65 MLD water in 23 hours, accordingly four VT pumps (two working
+ two of half the capacity including standby) can be housed in 8.0 m dia. of pump house with
accessories.
Please refer Annex-1 for the details of Intake well cum Pump house.
RAW WATER PUMPING MAIN
Raw water pumping main is to be provided from Intake well & pump house to the inlet of the
proposed water treatment plant to supply raw water of ultimate capacity of 20 years, as per the
norms, which works out to be as 14.06 mld to get 13.357 mld treated water in 23 hours. Please
refer Annex-1 for detailed design, accordingly the size of pumping main works out to be 400
mm instead of 500 mm of D.I., K-9, as per the Contract.
WPIL LIMITED, KOLKATA AQUA CONSULTANT, A-35, JANKI NAGAR, BHOPAL.
3
But the pumping main is to be designed for the 16.65 mld (instead of 14.06 mld), as given in the
Chapter -1.2 of Annexure-E of the agreement for 30 years ultimate design period in the year
2045. The economical size of pumping main works out to be 450 mm instead of 500 mm of D.I.,
K-9, as per the Contract.
Thus 1207 m long 450 mm diameter D.I. K-9 Raw water pumping main has been designed for
previous stages flows as per population and water demand worked out in different years on the
basis of Appendix-1.
Please refer Annex-2 & 3 for the details of Economical size of Raw Water Pumping Main, and
Surge calculations at Annex-4.
RAW WATER PUMPING EQUIPMENTS
Phase -1 of Ist 10 years-
Raw water pumping equipments are to be provided to pump raw water from the lowest level in
the Intake well to the inlet of the proposed Water Treatment Plant to supply raw water through
two working pumps of discharge capacity as 4320 lpm (11.92 million litre water in 23 hours),
instead of calculated 4258 lpm i.e. (11.75 million litre water in 23 hours), hence the pumping
equipments are designed including 10% losses in treatment for 10 years design period in the year
2025, as per Contract.
The rate of friction losses in 450 mm diameter D.I. K-9 Raw water pumping main for
intermediate flow in the year 2025 are 1.528 m per km and therefore, frictional and other losses
have been considered to design the vertical turbine pumps up to the inlet level at WTP from
intake well. Accordingly, raw water pumps should be capable to discharge raw water @ 4320
lpm at 74 m pumping head. There shall be five pumping sets including two working and one of
half the capacity i.e. 2160 lpm and two of further half i.e. 1080 lpm at 74 m pumping head, as
50% standby.
Please refer Annex-5 for the details of Raw Water Pumping Equipments for intermediate Phase-
1.
Phase -II of 2nd 10 years-
Raw water pumping equipments are to be provided to pump raw water from the lowest level in
the Intake well to the inlet of the proposed Water Treatment Plant to supply raw water through
two working pumps of discharge capacity as 5150 lpm (14.21 million litre water in 23 hours),
hence the pumping equipments are designed including 10% losses in treatment for 10 years
design period in the year 2035, as per Contract, to get 13.5 million litre treated water in 23 hours.
The rate of friction losses in 450 mm diameter D.I. K-9 Raw water pumping main for
intermediate flow in the year 2025 are 2.115 m per km and therefore, frictional and other losses
have been considered to design the vertical turbine pumps up to the inlet level at WTP from
intake well. Accordingly, raw water pumps should be capable to discharge raw water @ 5150
lpm at 74 m pumping head. There shall be five pumping sets including two working and one of
half the capacity i.e. 2575 lpm and two of further half i.e. 1288 lpm at 74 m pumping head, as
50% standby.
Please refer Annex-6 for the details of Raw Water Pumping Equipments for ultimate Phase-2.
WPIL LIMITED, KOLKATA AQUA CONSULTANT, A-35, JANKI NAGAR, BHOPAL.
