Scribd
Upload
227 views3 pages

Ground Mounted Solar Case Study

The 10 MW Ground-Mounted Solar PV Project aims to harness solar energy for clean power generation and carbon emission reduction. Located on approximately 50 acres, the project utilizes crystalline PV modules and string inverters, achieving an annual energy generation of about 17.5 million kWh. The project has successfully addressed challenges such as land undulation and soil erosion, demonstrating strong performance and reliability.

Uploaded by

Chetan Patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
227 views3 pages

Ground Mounted Solar Case Study

The 10 MW Ground-Mounted Solar PV Project aims to harness solar energy for clean power generation and carbon emission reduction. Located on approximately 50 acres, the project utilizes crystalline PV modules and string inverters, achieving an annual energy generation of about 17.5 million kWh. The project has successfully addressed challenges such as land undulation and soil erosion, demonstrating strong performance and reliability.

Uploaded by

Chetan Patil
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Case Study Report – Ground-Mounted Solar Power Plant

1. Project Overview

Project Name: 10 MW Ground-Mounted Solar PV Project


Location: [Insert Location – Village, Taluka, District, State]
Developer/EPC Contractor: [Company Name]
Date of Commissioning: [Insert Date]
Client/Owner: [Client Name]
Project Capacity: 10 MW (AC)
Type: Grid-connected, Ground-mounted
Technology Used: Crystalline PV Modules, String Inverters

2. Objective

The primary objective of this project is to harness solar energy by installing a 10 MW


ground-mounted photovoltaic (PV) system to supply clean and sustainable power to the
grid and reduce carbon emissions.

3. Site Details
Parameter Description

Land Area ~50 Acres

Topography Flat/Rolling

Soil Type Black Cotton / Laterite / Sandy

Accessibility Well connected by road

Grid Connectivity 33 kV HT line connected to substation [X


km away]

Climatic Conditions High solar irradiation zone (kWh/m²/day)

4. Design and Engineering

Module Capacity: 550 Wp (Mono PERC)


Total Modules: Approx. 18,200 Nos
Inverters: 30 x 320 kW String Inverters
Mounting Structure: Galvanized Iron Fixed Tilt (25°)
Tilt & Orientation: South-facing, optimal tilt for latitude
SCB/ACDB Panels: Integrated for each block
Earthing & Lightning Protection: GI Strip Earth mat & ESE Lightning Arrester system
Transmission Line: 11/33 kV – distance of ~3.5 km
SCADA/Remote Monitoring: Enabled

5. Installation and Commissioning

- Land Development: Clearing, grading, fencing


- Structure Installation: Pile foundation + MMS erection
- Module Mounting: 3 modules per table (example)
- String Formation: 26 modules per string
- DC Cabling: Laid via cable trenches with protection
- Inverter Installation: Mounted on RCC plinths with canopies
- AC Cabling & Evacuation: Through HT panels to substation
- Commissioning: Performance testing, grid synchronization

6. Operation and Maintenance

- Daily performance monitoring via SCADA


- Cleaning cycle based on soiling ratio
- Periodic preventive maintenance
- Inverter log review, IV curve tracing
- Vegetation and module cleaning management
- Safety audits and equipment health checks

7. Performance

CUF (Capacity Utilization Factor): ~19% annually


Annual Energy Generation: ~17.5 million units (kWh)
PR (Performance Ratio): 78–82%
CO₂ Offset: ~14,000 tons/year

8. Challenges and Solutions


Challenge Solution

Undulating land Adjusted MMS design & pile height

Monsoon soil erosion Installed stone pitching & drains

Delay in transmission line Temporary genset-based testing setup


9. Conclusion

The 10 MW Ground-Mounted Solar Power Plant has been successfully commissioned and is
contributing clean energy to the grid. The plant has demonstrated strong performance,
minimal maintenance issues, and a high level of reliability, marking it a successful case of
sustainable energy deployment.

You might also like