Osmania University, Telangana
B.E./[Link] CSE Sem 1 syllabus
Mathematics-I
BS102MT Mathematics - I
Credits 4
Unit-I
Sequences and Series: Sequences, Series, General properties of
series, Series of positive terms, Comparison tests, tests of
Convergence D’Alembert’s ratio test, Cauchy’s nth root test, Raabe’s
test, Logarithmic test, Alternating series, Series of positive and
negative terms, Absolute convergence and Conditional convergence.
Unit-II:
Calculus of one Variable: Rolle’s theorem, Lagrange’s, Cauchy’s
mean value theorems, Taylor’s series, Curvature, Radius of curvature,
Circle of curvature, Envelope of a family of curves, Evolutes and
Involutes.
Unit-III
Multivariable Calculus (Differentiation): Functions of two
variables, Limits and continuity, Partial derivatives, Total differential
and differentiability, Derivatives of composite and implicit functions
(Chain rule), Change of variables, Jacobian, Higher order partial
derivatives, Taylor’s series of functions of two variables, Maximum
and minimum values of functions of two variables, Lagrange’s method
of undetermined multipliers.
Unit-IV
Multivariable Calculus (Integration): Double integrals, Change of
order of integration, Change of Variables from Cartesian to plane
polar coordinates, Triple integrals.
Unit-V
Vector Calculus: Scalar and vector fields, Gradient of a scalar field,
Directional derivative, Divergence and Curl of a vector field, Line,
Surface and Volume integrals, Green’s theorem in a plane, Gauss’s
divergence theorem, Stoke’s theorem (without proofs) and their
verification.
Suggested Readings:
1. R.K. Jain & S.R.K Iyengar, Advanced Engineering Mathematics,
Narosa Publications, 2014.
2. Erwin Kreyszig, Advanced Engineering Mathematics, John Wiley,
9th Edition, 2012.
3. B.S. Grewal, Higher Engineering Mathematics, Khanna
Publications, 43rd Edition, 2014.
4. G.B. Thomas, Maurice Weir and Joel Hass, Thomas’ Calculus,
Peterson, 12th Edition,2010.
5. B.V. Ramana, Higher Engineering Mathematics, 23rd reprint,
2015.
Programming for Problem Solving
ES107CS Programming for Problem Solving
Credits 3
Unit - I
Introduction to Programming: Introduction to components of a
computer system (disks, memory, processor, where a program is
stored and executed, operating system, compilers etc.).
Idea of Algorithm: steps to solve logical and numerical problems.
Representation of Algorithm: Flowchart / Pseudocode with
examples. From algorithms to programs; source code, variables (with
data types) variables and memory locations, Syntax and Logical
Errors in compilation, object and executable code.
Unit - II
Control Structures: Arithmetic expressions and precedence,
Conditional Branching and Loops, Writing and evaluation of
conditionals and consequent branching.
Arrays: Arrays (1-D, 2-D), Character arrays and Strings
Unit - III
Basic Algorithms: Searching, Basic Sorting Algorithms (Bubble and
Selection), Finding roots of Equations. Functions: Functions
(including using built in libraries), Parameter passing in functions,
call by value. Passing arrays to functions: idea of call by reference
Unit - IV
Recursion: Recursion, as a different way of solving problems.
Example programs, such as Finding Factorial, Fibonacci series.
Structure: Structures, Defining structures and Array of Structures
Unit - V
Pointers - Idea of pointers, Defining pointers, Use of Pointers in self-
referential structures, notion of linked list (no implementation),
Introduction to File Handling.
Suggested Readings:
1. Byron Gottfried, Schism’s Outline of Programming with C,
McGraw-Hill
2. A.K. Sharma, Computer Fundamentals and Programming in C,
Universities Press, 2nd Edition, 2018.
3. E. Balaguruswamy, Programming in ANSI C, Tata McGraw-Hill
4. Brian W. Kernighan and Dennis M. Ritchie, the C Programming
Language, Prentice Hall of India.
Chemistry
BS105CH Chemistry
Credits 4
UNIT-I
Electrochemistry and Battery Chemistry: Electrochemistry:
Electrochemical cells, Electrolytic and Galvanic cells-notation, cell
reaction and cell potentials. Types of electrodes, Calomel
Quinhydrone and Glass electrodes. Determination of pH of a solution
by using Quinhydrone electrode. Thermodynamics of emf of cells,
Nernst equation and its derivation. Applications of Nernst equation to
electrode potential and emf of cells. Numerical problems.
Batteries: Primary batteries: Zn - Carbon battery. Secondary
batteries: Pb-Acid battery and Li-Ion battery, Applications. Flow
batteries (Fuel cells): Methanol-Oxygen fuel cells, Construction,
Applications.
UNIT-II
Water Chemistry and Corrosion: Water Chemistry: Hardness of
Water-Types and units of hardness, estimation of temporary and
permanent hardness of water by EDTA method. Alkalinity of water
and its determination. Water softening by Ion exchange and Reverse
Osmosis methods. Numerical problems. Specifications of potable
water. Sterilization by Chlorination. Break Point Chlorination.
Corrosion: Causes and its effects. Types of Corrosion-Dry or
Chemical corrosion and Wet or Electrochemical corrosion and their
mechanism. Electrochemical corrosion –Waterline and Pitting
Corrosion. Factors influencing rate of corrosion.
Corrosion control methods: Cathodic protection methods -
Sacrificial anodic and impressed current methods. Surface coating
methods: Hot Dipping-Galvanizing.
UNIT-III
Engineering Materials: Polymers: Basics of terms polymers:
Monomer and its functionality, Polymers and degree of
polymerization. Classification of polymers - Thermoplastics &
Thermosetting resins. Types of Polymerization (i) Addition (ii)
Condensation (iii) Co-Polymerization. Mechanism of free radical
polymerization
Preparation, Properties & Uses of the following polymers:
Plastics - PVC and Bakelite, Fibres - Nylon 6:6, and Kevlar,
Elastomers - Buna-S, Butyl and Silicone Rubbers.
Conducting polymers : Introduction, Classification and Mechanism
of conduction in Poly-acetylene, Applications of conducting polymers.
Biodegradable polymers: Introduction preparation, properties and
applications of polylactic acid
UNIT-IV
Chemical Fuels: Classification of fuels: Introduction, definition
and classification of chemical fuels- Primary and secondary fuels.
Solid, liquid and gaseous fuels. Requirements of a good fuel. Calorific
Value – HCV and LCV. Theoretical calculations of calorific value by
Dulong’s formula – Numerical problems.
Solid Fuels: Coal and its Ranking. Analysis of coal - Proximate and
Ultimate analysis.
Liquid Fuels: Fractionation of Petroleum. Composition and uses of
Gasoline, Diesel and Kerosene. Cracking & its Significance- Catalytic
cracking by moving bed method, Knocking. Fuel rating – Octane and
Cetane numbers.
Gaseous Fuels: LPG, CNG -Composition and Uses.
Combustion: Ignition temperature of a fuel, calculation of air
quantities by weight and volume required for combustion of a fuel-
Numerical problems.
UNIT-V
Green Chemistry and Composites: Green Chemistry: Concept,
Principles of green chemistry – Atom Economy, Catalysis. and
examples of clean technology.
Biodiesel: Sources, Concept of Trans esterification and carbon
neutrality. Properties and significance
Composites: Introduction to composites, composition and
characteristic properties of composites. Classification of composites
based on matrix, reinforcement and ply. Applications of composites.
Suggested Readings:
1. Principles of Physical Chemistry by Puri, Sharma and Pathania S.N.
Chand & Co. New Delhi (Latest edition).
2. Engineering Chemistry by P C Jain and M Jain Dhanpat Rai & Sons
(15th Edn), New Delhi.
3. Chemistry in Engineering and Technology by J C Kuriacose and J
Rajaram, TMH, New Delhi.
4. Engineering Chemistry by O G Palanna, TMH, and New Delhi.
5. Engineering Chemistry by S S Dara, S Chand & Sons, New Delhi.
6. Engineering Chemistry by Sashi Chawla. Dhanpat Rai & Sons, New
Delhi.
7. Engineering Chemistry by Shikha Agrawal, Cambridge, New Delhi.
8. Engineering Chemistry by Prasanta Rath, Cengage Learning India
Pvt. Ltd.
Environmental Science
MC112CE Environmental Science
UNIT-I
The Multidisciplinary Nature of Environmental Studies:
Definition, scope and importance, need for public awareness.
Natural Resources: Water Resources – Use and over utilization of
surface and ground water, flood, drought, conflicts over water, Dams:
Benefits and Problems. Food Resources –World Food Problems,
effects of modern agriculture, fertilizer-pesticides problems, water
logging, salinity, Forest Resources – Use and over exploitation,
deforestation & its effect on tribal [Link] Resources –Land
Degradation, environmental effect of mining, man induced landslides,
soil erosion and desertification.
Energy Resources –Growing energy needs, Renewable and Non-
renewable energy resources.
UNIT-II
Ecosystems: Concept of an ecosystem, Structure and function of an
ecosystem, Producers, consumers and decomposers, Energy flow in
ecosystem, food chains, ecological pyramids, ecological succession,
types of ecosystems (marine, pond, river, forest, grassland, desert)
UNIT-III
Biodiversity: Levels of Biodiversity, Bio-geographical classification of
India, Value of biodiversity, Threats to biodiversity, endangered and
endemic species of India, Conservation of biodiversity, global and
national efforts.
UNIT-IV
Environmental Pollution: Definition, Causes, effects and control
measures of air pollution, water pollution, soil pollution, noise
pollution, thermal pollution, solid waste management.
Environment Protection Act: Air, water, forest and wildlife Acts,
issues in the enforcement of environmental legislation.
UNIT-V
Social Issues and the Environment: Watershed management and
environmental ethics. Climate change, global warming, acid rain,
ozone layer depletion.
Environmental Disaster Management: Types of disasters, impact
of disasters on environment, infrastructure, and development. Basic
principles of disaster mitigation, disaster management, and
methodology. Disaster management cycle and disaster management
in India.
Suggested Reading:
1. A.K. De, Environmental Chemistry, Wiley Eastern Ltd.
2. E.P. Odum, Fundamentals of Ecology, W.B. Sunders Co., USA.
3. M.N. Rao and A.K. Datta, Waste Water Treatment, Oxford and IBK
Publications.
4. Benny Joseph, Environmental Studies, Tata McGraw Hill, 2005.
5. V.K. Sharma, Disaster Management, National Centre for Disaster
Management, IIPE,1999.
Essence of Indian Traditional Knowledge
UNIT - I
Introduction to Culture: Culture, civilization, culture and heritage,
general characteristics of culture,
importance of culture in human literature, Indian Culture, Ancient
India, Medieval India, Modern India
UNIT - II
Indian Languages, Culture and Literature: Indian Languages and
Literature-I: the role of Sanskrit,
significance of scriptures to current society, Indian philosophies,
other Sanskrit literature, the literature of
south India
Indian Languages and Literature-II: Northern Indian languages &
literature
UNIT - III
Religion and Philosophy: Religion and Philosophy in ancient India,
Religion and Philosophy in
Medieval India, Religious Reform Movements in Modern India
(selected movements only)
UNIT – IV
Fine Arts in India (Art, Technology& Engineering): Indian Painting,
Indian handicrafts, Music,
divisions of Indian classic music, modern Indian music, Dance and
Drama, Indian Architecture (ancient,
medieval and modern), Science and Technology in India, development
of science in ancient, medieval
and modern India
UNIT – V
Education System in India: Education in ancient, medieval, and
modern India, aims of education,
subjects, languages, Science, and Scientists of Ancient India, Science
and Scientists of Medieval India,
Scientists of Modern India
Visit [Link] to access free study material as per your university syllabus
