Scribd
Upload
311 views1 page

Hydraulic Design for SH 57 Improvement

The document outlines the calculation of hydraulic discharge and the design of an opening for the improvement of a road project spanning 38.250 km. It details the use of Dickens's formula to determine a discharge of 2.7 cum/sec, proposing a 1.2 m diameter NP-4 Hume pipe with a length of 12 m. The analysis concludes that one pipe is required to meet the waterway needs of the project.

Uploaded by

Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
311 views1 page

Hydraulic Design for SH 57 Improvement

The document outlines the calculation of hydraulic discharge and the design of an opening for the improvement of a road project spanning 38.250 km. It details the use of Dickens's formula to determine a discharge of 2.7 cum/sec, proposing a 1.2 m diameter NP-4 Hume pipe with a length of 12 m. The analysis concludes that one pipe is required to meet the waterway needs of the project.

Uploaded by

Irfan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CALCULATION OF HYDRAULIC DISCHARGE AND DESIGN OF OPENING

Name of Project :IMPROVEMENT OF SH 57 TO TINTRAJ DHANDEGAON DEVGAON GOSAVIWADI


KHANDESHWARWADI RATANAPUR ANALA KANDARI KUMBEPHAL PACHPIMPALA PARANDA MUNGHSHI
ROAD KM 0+00 TO 65+00 (TINTRAJ SH 57 TO PARANDA KURDUWADI (PALKHI MARG) (TOTAL LENGTH 38.250
KM)

1 Chainage of H.P.C : 0+926

2 Description of Catchments : 0.086 [Link] or Acre : 21.25

3 Height of Fill permitted : 0.6 Mtr

4 Pipe Daimeter Proposed : 1.2 Mtr No : 1

5 Length of pipe : 12 Mtr


PROCEDURE ADOPTED :-
For finding discharge dickens's formula adopted
for coefficient of discharge for plain terrain = 14 to 19

Q= CM¾

Q= 17 x ( 0.086 )¾

Discharge by Dickens's formula Q= 2.7 cum/sec

PROPOSAL :- 1.2 Mtr Dia NP-4 Hume Pipe is proposed to provide

Length of Pipe L = 12
For Square entry Ke = 1.107 (R)^0.5 = 0.86 As per Table 19.1 Values of Ke and Kf of IRC SP13
Kf = 0.00394L/R^1.2 = 0.07 Kf as per Table 19.1 Values of Ke and Kf of IRC SP13

0.5
H
Velocity V = 4.43 X
1+Ke+Kf

V= 2.47 m/Sec

Area of 1200mm one Pipe =A ∏d^2


= 1.13 Sqr. Mtr
4

Discharge by one Pipe Q = A X v = 2.791 cum / sec

No of Pipe Required :-
Water way required = 2.7 /v
= 1.093 Sqm
Area of 1200mm one Pipe =A ∏d^2
= 1.13 Sqr. Mtr
4
No of Pipe required = Total water way / area of one pipe
= 0.967
Say = 1 No of Pipe

Hence provide 1 row of 1.2 Mtr dia NP-4 Pipes

You might also like