ARCHITECTURAL DRAWING

A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421" 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.

2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

DEFORMED BARS CONFIRMING TO IS: 1786-1985.

CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
FOUNDATION SHOULD REST ON FIRM SOIL.
05 05 10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
14'-421"

14'-421"
13. AGGREGATE USED IN CONSTRUCTION-

14'-421"
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).

14'-721"
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).
BED ROOM
14'-7"X14'-0"
REVISION
REVISION NO. DESCRIPTION DATE BY

04 04

TOILET/STORE/SHAFT S.NO.- MARK PURPOSE

8'-1"X6'-3"
1 BRICK WALL
2 ELEVATION WORK
12'-921"

12'-921"
3
DOORS

4 WINDOWS
5 STEPS
6
RAMP
LIFT
7 GRID LINE/CENTRE LINE
6'-0"X5'-0"
8 SECTION LINE
9 FITTINGS
72'-4" (PLOT OUT-OUT)
10 SETBACK LINE
03 03 11 DIM. GRID
12 DIM. PLOT
59'-0"

13 FURNITURE

STAIR CASE 14
8'-1"X16'-0" PARKING AREA 15
23'-3"X43'-10" 16
17
UP

18

PROJECT CONSULTANTS
21'-221"
16'-821"

16'-821"
43'-1021"

02 02

CLIENT-
14'-421"

14'-421"

MR. VIKAS JI

PROJECT-

RESIDENTIAL BUILDING

ADDRESS-

01 01 PLOT NO.1063 SEC. 03 REWARI

SCALE N.T.S. DIRECTION

DATE 17-07-2025
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR FIRST FLOOR

MAIN GATE
DRAWING TITLE-
STILT FLOOR FLOOR PLAN
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421" 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.

2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

DEFORMED BARS CONFIRMING TO IS: 1786-1985.

CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
FOUNDATION SHOULD REST ON FIRM SOIL.
05 05 10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
TOILET H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
TOILET 5'-0"X6'-10" 'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
5'-0"X8'-0" JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
14'-421"

14'-421"
13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).
BED ROOM
9'-6"X14'-0"
REVISION
BED ROOM REVISION NO. DESCRIPTION DATE BY
TOILET
DRESS 9'-6"X14'-0" 5'-0"X6'-10"
5'-0"X5'-8"

04 04

TOILET/STORE/SHAFT S.NO.- MARK PURPOSE

8'-1"X6'-3"
1 BRICK WALL
2 ELEVATION WORK
12'-921"

12'-921"
3
DOORS

4 WINDOWS
5 STEPS
6
BED ROOM RAMP
LIFT 9'-9"X12'-5"
7 GRID LINE/CENTRE LINE
6'-0"X5'-0"
8 SECTION LINE
9 FITTINGS
72'-4" (PLOT OUT-OUT)
10 SETBACK LINE
03 03 11 DIM. GRID
12 DIM. PLOT
59'-0"

SHAFT 13 FURNITURE

STAIR CASE LOBBY 9'-9"X3'-3" 14

8'-1"X16'-0" 11'-0"X28'-9" 15
16
17
UP

18

PROJECT CONSULTANTS
BED ROOM
16'-821"

16'-821"

9'-9"X12'-4"

02 02

DRESS
5'-0"X5'-8" TOILET
5'-0"X6'-10"

BED ROOM
9'-6"X14'-0" CLIENT-
14'-421"

14'-421"

MR. VIKAS JI

PROJECT-
TOILET TOILET
5'-0"X8'-0" 5'-0"X6'-10"
BED ROOM
RESIDENTIAL BUILDING
9'-6"X14'-0"
ADDRESS-

01 01 PLOT NO.1063 SEC. 03 REWARI

SCALE N.T.S. DIRECTION

DATE 17-07-2025
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR FIRST FLOOR

MAIN GATE
DRAWING TITLE-
TYPICAL FLOOR PLAN
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421" 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.

2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

6'-7"

DEFORMED BARS CONFIRMING TO IS: 1786-1985.

CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
9" 9"
13'-1021"
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
14'-3" 1'-6" ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.

9"
FOUNDATION SHOULD REST ON FIRM SOIL.
05 05
1'-6"

1'-6"
10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &

C2 CEMENT MORTAR 1:6.

11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
C2 C2 1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC

12'-1021"
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
14'-421"

12'-121"

12'-121"

14'-421"
13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).

REVISION
REVISION NO. DESCRIPTION DATE BY

C2 C2 C2
1'-6"

1'-6"

1'-6"
04 04
14'-3" 14'-721"
9" 9" 9"
S.NO.- MARK PURPOSE

1 BRICK WALL
2 ELEVATION WORK
11'-921"
12'-921"

12'-021"

12'-021"

12'-921"
3
DOORS

4 WINDOWS
5 STEPS
6
RAMP

7 GRID LINE/CENTRE LINE

8 SECTION LINE
1'-0"

FITTINGS
C1 C1 9
9"

C2
72'-4" (PLOT OUT-OUT)
10 SETBACK LINE
03 03
1'-6"

11 DIM. GRID
12 DIM. PLOT
1'-6" 6'-221" 1'-6" 20'-1121"
59'-0"

13 FURNITURE

1'-0" 14
15
16
17
18

PROJECT CONSULTANTS
15'-221"

15'-1121"
16'-821"

16'-821"
15'-221"

C2
1'-6"

02 02
1'-6"
1'-0"

C1 C1

CLIENT-
12'-1021"

12'-121"
14'-421"

14'-421"
13'-2"

MR. VIKAS JI

PROJECT-

RESIDENTIAL BUILDING

ADDRESS-
C2 C1
C1
1'-6"

1'-6"

01 01 PLOT NO.1063 SEC. 03 REWARI

6'-1121" 20'-1121"
1'-0"

1'-6"
SCALE N.T.S. DIRECTION
9" 1'-0" DATE 17-07-2025
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

6'-9"

CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR STRUCTURAL

DRAWING TITLE-
COLUMN LAYOUT PLAN
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
A A NOTE-
THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS
AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
B B PERMISSION.
TIES GENERAL NOTES-
AS/TYP.DETAIL 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.
2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
SIZE 12"X18" 9"X18" 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
VER. BARS 10-20 4-16 4-20 STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
TIES AS/COL./ELE. AS/COL./ELE.
5. # & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
CONC. MIX M-20 M-20 DEFORMED BARS CONFIRMING TO IS: 1786-1985.
6. CONC. MIX SHALL BE M-20.
7. CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-50MM.
8. ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
9. FOUNDATION SHOULD REST ON FIRM SOIL.
10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
FROM S.F. TO 1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
TOP OF BUILDING
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
A A
JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
B B 13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
TIES B FOUNDATION WORK- 10MM+20MM(40%+60%).
AS/TYP.DETAIL C BEAM AND COLUMNS- 10MM+20MM(40%+60%).
14. SHORTER DIA. OF BAR
HIGHER DIA. OF BAR
SIZE 12"X18" 9"X18"
VER. BARS 10-20 4-16 4-20 REVISION
REVISION NO. DESCRIPTION DATE BY
TIES AS/COL./ELE. AS/COL./ELE.
CONC. MIX M-20 M-20
CLIENT-
MR. VIKAS JI
FROM F.F. TO
S.F. SLAB.
A A
B B
TIES
AS/TYP.DETAIL
SIZE 12"X18" 9"X18"
VER. BARS 10-20 4-16 4-20
TIES AS/COL./ELE. AS/COL./ELE.
CONC. MIX M-20 M-20
DRAWING TITLE-
STRUCTURAL DRAWING(COLUMN)
FROM FOUND. TO
G.F. SLAB.
SC AD
LVLS NO. C1 C2
COLS
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421" 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.

2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

DEFORMED BARS CONFIRMING TO IS: 1786-1985.

6'-0" CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.

5'-0"
FOUNDATION SHOULD REST ON FIRM SOIL.
05 05
6'-0"

6'-0"
10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.

F2 11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT

F2 1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE

F2 EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO

5'-0" 5'-0" H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE

'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
14'-421"

14'-421"
13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).

REVISION
REVISION NO. DESCRIPTION DATE BY
6'-0"

6'-0"

6'-0"
04 04
F2
F2
F2
5'-0" 5'-0" 5'-0" S.NO.- MARK PURPOSE

1 BRICK WALL
2 ELEVATION WORK
2'-0"
12'-921"

12'-921"
3
4'-421"

DOORS

4
2'-0" WINDOWS
5 STEPS
7'-6"
6
RAMP
LIFT PIT.
6'-6"

LVL.-5'-0" 7 GRID LINE/CENTRE LINE

8 SECTION LINE
9 FITTINGS

72'-4" (PLOT OUT-OUT)

SETBACK LINE
7'-6"

10
03 03
7'-6"

11 DIM. GRID

F1 F1
12 DIM. PLOT
59'-0"

13 FURNITURE
14
15
16
11'-9"
6'-6" 17
18

PROJECT CONSULTANTS
16'-821"

16'-821"
7'-0"

02 02
7'-6"

F1
F1

11'-4"
6'-6" CLIENT-
14'-421"

14'-421"

MR. VIKAS JI

PROJECT-

RESIDENTIAL BUILDING

ADDRESS-
7'-0"

7'-6"

01 01 PLOT NO.1063 SEC. 03 REWARI

F1 F1
SCALE N.T.S. DIRECTION
DATE 17-07-2025
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

11'-4" CHECKED AR.RAGHU

6'-6"
N
DRG. NO. 01
FLOOR STRUCTURAL

DRAWING TITLE-
COLUMN LAYOUT PLAN
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
NOTE-
THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS
AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
GENERAL NOTES-
1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.
2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
PLINTH LEVEL 3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
3" FLOOR FINISH LEVEL 4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
PB AS/DETAILS # & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
DEFORMED BARS CONFIRMING TO IS: 1786-1985.
CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
FOUNDATION SHOULD REST ON FIRM SOIL.
10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
TIES AS / COLUMN DETAILS. 11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
N.G.L./ROAD L.V.L CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
TIES -8@5"C/C PLINTH LEVEL
B
C
FOUNDATION WORK- 10MM+20MM(40%+60%).
BEAM AND COLUMNS- 10MM+20MM(40%+60%).
BELOW N.G.L 3" FLOOR FINISH LEVEL REVISION
REVISION NO. DESCRIPTION DATE BY
PB AS/DETAILS
S.NO.- MARK PURPOSE
12@6"C/C TIES AS / COLUMN DETAILS. 1 BRICK WALL
12@6"C/C 2 ELEVATION WORK
3
DOORS
4 WINDOWS
KICKER 50MM KICKER 5
6
STEPS
RAMP
GRID LINE/CENTRE LINE
N.G.L./ROAD L.V.L 7
8 SECTION LINE
9 FITTINGS
SIDE COVER 50MM TIES -8@5"C/C 10
11
SETBACK LINE
DIM. GRID
12 DIM. PLOT
CONCRETE COVER 50 - 75MM
BELOW N.G.L 13
14
FURNITURE
15
P.C.C - 6" 16
17
18
P.C.C./LEVELING COURSE(1:4:8) PROJECT CONSULTANTS
RAMMED EARTH
SECTION OF FOOTING MARKED F1
10@6"C/C
10@6"C/C
KICKER 50MM KICKER
RCC WALL 230 MM THK RCC WALL 230 MM THK CLIENT-
SIDE COVER 50MM
MR. VIKAS JI
CONCRETE COVER 50 - 75MM PROJECT-
P.C.C - 6" RESIDENTIAL BUILDING
ADDRESS-
P.C.C./LEVELING COURSE(1:4:8) RAMMED EARTH
PLOT NO.1063 SEC. 03 REWARI
SCALE N.T.S. DIRECTION
DATE 17-07-2025
SECTION OF FOOTING MARKED F1 DEALT. SURAJ
CHECKED AR.RAGHU
N
DRG. NO. 01
FLOOR STRUCTURAL
DRAWING TITLE-
PLINTH BEAM LAYOUT PLAN
DETAILS OF F3 SC AD
SECTION. L - L
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421"

9"
1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.
2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

5'-10"
DEFORMED BARS CONFIRMING TO IS: 1786-1985.
CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.

9"
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
FOUNDATION SHOULD REST ON FIRM SOIL.
05 PB-02 PB-02 05 10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT

9" 9" 1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.

14'-3" 14'-721" 12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO

H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE

9" 'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.

JUNCTIONS.
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.

13'-721"
14'-421"

14'-421"
PB-02

13. AGGREGATE USED IN CONSTRUCTION-

PB-02

PB-02
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).

REVISION
REVISION NO. DESCRIPTION DATE BY
9"

9"
04 PB-02 PB-02 04
6'-321"

S.NO.- MARK PURPOSE

1 BRICK WALL
2 ELEVATION WORK

PB-02
11'-921"
12'-921"

12'-921"
9"

PB-02

3
DOORS

4 WINDOWS
5 STEPS
6
RAMP
5'-0"

7 GRID LINE/CENTRE LINE

1'-0"

8 SECTION LINE
9"

9 FITTINGS

72'-4" (PLOT OUT-OUT)

10 SETBACK LINE
03 PB-01 PB-01 03 11 DIM. GRID
12 DIM. PLOT
59'-0"

13 FURNITURE
14
15

9" 16
9"
7'-821" 21'-221"
17
18

PROJECT CONSULTANTS
421"
PB-02
PB-02

SIZE 9"X12" 9"X12"

15'-1121"

15'-1121"
16'-821"

16'-821"

VER. BARS 8-16 6-16

PB-02

TIES 8 AS/COL./ELE. AS/COL./ELE.

CONC. MIX M-20 M-20

12" 9"
18"

12"
FROM FOUND. TO
G.F. SLAB.
1'-0"

9"

LVLS NO. PB-01 PB-02

COLS
02 PB-02 PB-01 02

9" 9" 9"

14'-3" 14'-721"
CLIENT-
13'-421"
PB-02

PB-02

PB-02
14'-421"

14'-421"

MR. VIKAS JI

PROJECT-

RESIDENTIAL BUILDING

ADDRESS-
1'-0"

01 PB-02 PB-01 01 PLOT NO.1063 SEC. 03 REWARI

SCALE N.T.S. DIRECTION

DATE 17-07-2025
6'-0"
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR STRUCTURAL
9"

DRAWING TITLE-
PLINTH BEAM LAYOUT PLAN
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

31'-2"(PLOT OUT-OUT) AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT

421" 15'-0" 15'-421" SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
421" PERMISSION.
8'-521" 6'-7" 15'-421"
GENERAL NOTES-
1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.
2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
6'-1121"

6'-1121"
6'-7"

STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE

CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
DEFORMED BARS CONFIRMING TO IS: 1786-1985.

9"
CONC. MIX SHALL BE M-20.
05 B2-(9"X12") B2-(9"X12") 05 CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:

B1-(12"X18") COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.

ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
9" 9" 9" 9" 9"
4'-721" 8'-1021" 9'-3" 4'-721" FOUNDATION SHOULD REST ON FIRM SOIL.
10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
B2-(9"X12")
EXECUTION.
14'-421"

14'-421"
13'-721"
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
CB-(9"X16")
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
BED ROOM
14'-7"X14'-0" 13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.
13. AGGREGATE USED IN CONSTRUCTION-
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).

9"
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).

04 B2-(9"X12") B2-(9"X12") 04 B2-(9"X18") REVISION

9"

REVISION NO. DESCRIPTION DATE BY

TOILET/STORE/SHAFT 9"
6'-321"

8'-1"X6'-3"
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
12'-921"

12'-921"
11'-921"
9"

CB-(9"X6")
5'-0"

LIFT S.NO.- MARK PURPOSE

6'-0"X5'-0"
1 BRICK WALL
1'-0"

72'-4" (PLOT OUT-OUT)

2 ELEVATION WORK
03 B1-(12"X12") B1-(12"X12") 03 3
DOORS
9"
59'-0"

3'-3"

4 WINDOWS
STAIR CASE 5 STEPS
8'-1"X16'-0"
6
B2-(9"X12") RAMP
UP

9"

7 GRID LINE/CENTRE LINE

8 SECTION LINE
9 FITTINGS
B2-(9"X12")
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
16'-821"

16'-821"
15'-1121"

10 SETBACK LINE
B3-(6"X12") 11 DIM. GRID
12 DIM. PLOT
11'-1121"

13 FURNITURE
14
15

9" 9" 16
7'-821" 11'-021" 9'-5" 17
18
1'-0"

9" PROJECT CONSULTANTS

02 B1-(12"X12") B1-(12"X12") 02
9"
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
14'-121"

14'-421"
14'-421"

14'-421"

9" 9" 9" 9" 0"

4'-721" 8'-1021" 9'-3" 5'-421"

B1-(12"X12") B1-(12"X12")
01
0"

01
3"

3'-6"
7'-121"

7'-121"
6'-9"

B3-(6"X12")
CLIENT-
6"

MAIN GATE MR. VIKAS JI

8'-521" 6'-7" 15'-421" PROJECT-

421" 15'-0" 421"
30'-5" RESIDENTIAL BUILDING

A B C D ADDRESS-

PLOT NO.1063 SEC. 03 REWARI

SCALE N.T.S. DIRECTION

0.3L¹
0.1L¹
0.3L² DATE 17-07-2025
0.15L¹ 0.15L² DEALT. SURAJ
CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR FIRST FLOOR
>P/2
P >P/2

P
DRAWING TITLE-
0.15L¹ STILT FLOOR
0.25L¹ 0.25L²
L1 L2
SLAB BEAM DETAIL
SIMPLIFIED RULES FOR CURTAILMANT OF BARS - SECTION THROUG MIDDLE STRIP
SC AD
 ARCHITECTURAL DRAWING
A B C D NOTE-

THIS DRAWING IS PROPERTY OF STUDIO CREATIVE EDGE ARCHITECTS

AND DESIGNERS(ENGINEERS,VALUERS,INTERIOR DESIGNERS). IT
31'-2"(PLOT OUT-OUT) SHOULD NOT BE REPRODUCED OR USED WITHOUT THEIR PRIOR
PERMISSION.
15'-0" 15'-421"
421" 421" GENERAL NOTES-

8'-521" 6'-7" 15'-421" 1. ALL DIMENSIONS TO BE READ NOT TO BE SCALED.

2. THIS DRAWING SUPERCEDES ALL OTHER PREVIOUS DRWAING.
3. ALL DIMENSIONS ARE IN FEET AND INCHES EXCEPT OTHERWISE.
4. THIS DRAWING SHOULD BE READ IN CONJUNCTION WITH RELEVANT
STRUCTURAL DRAWING & ANY DISCRIPANCY NOTICED SHOULD BE
CLARIFIED BEFORE EXECUTION.
# & Ø SIGN. INDICATE Fe-500 GRADE STEEL COLD TWISTED
6'-1121"

6'-1121"
6'-7"

DEFORMED BARS CONFIRMING TO IS: 1786-1985.

CONC. MIX SHALL BE M-20.
CLEAR COVER FOR MAIN REINFORCEMENT SHALL BE:
COLUMNS-40MM; BEAMS-25MM; FOOTING BOTT. COVER-60MM.
ONLY 43 GRADE CEMENT OF APPROVED QUALITY SHALL BE USED.
FOUNDATION SHOULD REST ON FIRM SOIL.
05 B2-(9"X12") B2-(9"X12") 05 10. BRICK WORK SHALL BE IN BRICK OF CLASS DESIGNATION 100 &
CEMENT MORTAR 1:6.
11. SAFE BEARING CAPACITY HAS BEEN ASSUMED AS 15T/SQ.M. AT
1.2 M BELOW N.G.L. WHICH SHOULD BE GOT VERIFIED BEFORE
EXECUTION.
12. LOWER SPACING OF TIES IN COLUMNS SHALL BE FOLLOWED UP TO
H/5 FROM COLUMN-FOOTING AND COLUMN-BEAM JUNCTION WHERE
'H' IS THE CLEAR HEIGHT BETWEEN TWO CONSECUTIVE JUNCTIONS.
JUNCTIONS.
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
B2-(9"X12")
13. OPC CEMENT SHOULD BE USED IN SUPER STRUCTURE WHILE PPC
CEMENT SHOULD BE USED IN NORMAL CONSTRUCTION.

S/1
14'-421"

14'-421"
13. AGGREGATE USED IN CONSTRUCTION-

S/1 CB-(9"X16")
A P.C.C IN FOUNDATION-40MM
B FOUNDATION WORK- 10MM+20MM(40%+60%).
C BEAM AND COLUMNS- 10MM+20MM(40%+60%).
BED ROOM
14'-7"X14'-0"
REVISION
REVISION NO. DESCRIPTION DATE BY

04 B2-(9"X12") B2-(9"X12") 04

TOILET/STORE/SHAFT S.NO.- MARK PURPOSE

8'-1"X6'-3"
1 BRICK WALL
2 ELEVATION WORK
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
S/1
12'-921"

12'-921"
3

S/1 4
DOORS

WINDOWS
5 STEPS
6
RAMP
LIFT
7 GRID LINE/CENTRE LINE
6'-0"X5'-0"
8 SECTION LINE
9 FITTINGS

72'-4" (PLOT OUT-OUT)

10 SETBACK LINE
03 B1-(12"X12") B1-(12"X12")
03 11 DIM. GRID
12 DIM. PLOT
59'-0"

13 FURNITURE

STAIR CASE 14
8'-1"X16'-0" 15

B2-(9"X12") 16
17
UP

18

PROJECT CONSULTANTS
B2-(9"X12")
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")
16'-821"

16'-821"

S/1
S/1

02 B2-(9"X12") B2-(9"X12") 02
#10@5"C/C

#10@5"C/C

CLIENT-
B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

B2-(9"X12")

S/1 S/1
14'-421"

14'-421"

MR. VIKAS JI

SLAB THICKNESS-6" PROJECT-

#10@6"C/C #10@6"C/C
RESIDENTIAL BUILDING

ADDRESS-

01 B2-(9"X12") B2-(9"X12") 01 PLOT NO.1063 SEC. 03 REWARI

SCALE N.T.S. DIRECTION

DATE 17-07-2025
7'-121"

7'-121"

DEALT. SURAJ
6'-9"

B3-(6"X12") CHECKED AR.RAGHU

N
DRG. NO. 01
FLOOR STRUCTURAL

MAIN GATE
DRAWING TITLE-
TYPICAL FLOOR SLAB DETAIL
8'-521" 6'-7" 15'-421"
421" 15'-0" 421"
30'-5"
SC AD
A B C D
 ARCHITECTURAL DRAWING
TYPICAL STAIRCASE DETAILS-
0.15L

0.15L
0.2L

0.2L
0.15L 0.2L 0.25L
0.2L
0.25L
L

0.2L
0.25L

0.15L
0.2L
0.2L

0.25L

0.25L
0.2L 0.25L
0.15L
0.2L
L

0.2L 0.25L
0.2L SL.TH. 0.15L

0.15L

0.15L
0.2L

0.2L
L L
L=SPAN UNDER CONSIDERATION
TYPICAL SECTIONAL PLAN OF SLAB