Scribd
Upload
185 views2 pages

Cpplus Anpr Itsapi Feature

Uploaded by

DISASTER MANAGEMENT CONSULTANTS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
185 views2 pages

Cpplus Anpr Itsapi Feature

Uploaded by

DISASTER MANAGEMENT CONSULTANTS
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

CPPLUS ANPR ITSAPI Feature

There is an option in CPPLUS ANPR called ITSAPI, through which a camera will push ANPR details
to a specific server.

1. Before start configuration, please make sure CPPLUS ANPR camera CP-UNC-TT41L3-VM
should have upgraded version.
Note – Please contact our Team to get upgraded firmware version.

2. After configuring all other settings like network, ANPR, etc., please go to Settings →
Network → ITSAPI option to set up server details and other required parameters.
3. Please download and install NetAssist version-5.0.14 on a Local PC.

4. Once the user mentioned the NetAssist system details in the camera, then the camera
will start pushing the data to the NetAssist tool.

Note – Please make sure license plate details are captured by the camera. Then the camera will push the
details to the NetAssist tool. To verify the license plate capturing, please use camera web access.

You might also like