ACKNOWLEDGEMENT
It gives us great pleasure on bringing out the project entitled, we express our
deep sense of gratitude and sincere regards to our guide Prof. H. D. Bobade lecturer
of Electrical Engineering department for his timely guidance and friendly discussion
had helped us immensely in selecting this current topic and completing the project
work.
We are thankful to Prof. P. M. Gophane Head of Electrical Engineering
Department, for their inspiration and encouragement. He has immensely helped in
providing all opportunities and facilities for the project work.
We are thankful to Prof. R. M. Wabale Principal, Institute of Technology and
Engineering. Malegaon (Bk.) for providing institutional facilities and suggestions.
We are thankful to all the faculty members of Electrical Engineering
Engineering department and library for help which have been immensely useful in
our work.
We will fail in our duties if we do not mention our classmate who was a
constant source of inspiration during the project work.
Last but not the least we are thankful to all them who directly or indirectly
helped us to complete this work.
Project Members-
Prashant Namdev Holkar 2000380005
Vijay Rajendra Shinde 2000380028
Soham Chandrakant Patil 2000380160
Rushikesh Santosh Kokare 2000380021
Date: / /
Place: SVPM’S ITE. Malegaon Bk
ABSTRACT
This project provides a password-based mostly fuse system using . Quite a lot of fatal
accidents happen with linemen because of electrical shocks. It’s a result of miscommunication between
linemen and substations. The project aims to resolve this issue by creating the use of IoT. The IoT based
mostly fuse may be a system with a high latent period, that uses the interconnection network (internet) to
manage electrical hundreds. This method uses a local area network module paired with Atmega328p
microcontroller domestically to attach to the web. It’s conjointly equipped with associate show LCD
digital display alphanumeric display} display that shows the state of every load connected to the system,
either On or Off. A user or operator at the opposite finish will remotely connect with the system
mistreatment a web device associated with an interface named “IoT Gecko”. Here, the user or operator
must log in on the IoT lizard interface passing through an extra layer of security that is password
Protection.
LIST OF CONTENTS
a. Title Page
b. certification
c. Acknowledgment
d. Abstract
e. Index
f. List of Figures
INDEX
Sr. No Chapter Name Page No
1. Introduction… ................................................................. (1-10)
1.1 General Introduction ..................................................................... 01
1.2 Objective ....................................................................................... 03
2. Block Diagram and it’s Description................................ (4-6)
2.1 Block Diagram… ............................................................................ 05
2.2 Block Diagram description… ......................................................... 06
3. Circuit Diagram and It’s Working ....................................(7-9)
3.1 Circuit Diagram… ..........................................................................08
3.2 Circuit working ............................................................................... 09
4. Step by step procedure of creating circuit electronic…(10-12)
Procedure ............................................................................................ 11-12
5. Software Specifications ..................................................... (13-16)
ASM Program ..................................................................... 14-16
6. Hardware Specification… ............................................... (17-35)
6.1 Transformer ................................................................................... 18-19
20-21
6.3 Voltage Regulator ........................................................................... 22
… 23
o… 24-26
6.6 MOSFET… .................................................................................... 27-28
6.7 Micro controller ............................................................................. 29
6.8 Relay .............................................................................................. 30-31
6.9 Liquid Crystal Display(LCD)… .................................................... 32-33
6.10 IR LED… ..................................................................................... 34-35
7. Testing and Trouble Shooting of Electronic CB ................ (36-38)
7.1 Test and Trouble Shot ..................................................................... 37
7.2 General Information........................................................................ 38
8. Advantages , Disadvantages and Application…………...(39-40)
9. Conclusion ............................................................................ (41-42)
9.1 Conclusion .......................................................................................... 42
9.2 Future scop .......................................................................................... 42
10. Reference…………………………………………………..(43-44)
Appendix-I List of project Material ....................................... 45
LIST OF FIGURES
Figure No. Figure Name Page NO.
1. Block Diagram 5
2. Circuit Diagram 8
3. Circuit Diagram (Model photo) 9
4. Step Down Transformer 19
5. Rectifier 20
6. Voltage Regulator 22
7. Arduino Uno 25
8. MOSFET 27
9. Relay 30
10. LCD 32
11. IR LED 35
12. Future Scope 42
