OXICURE WB90
Aqua Based Concrete Curing Compound
Description Properties Values
Oxicure WB90 is a non-degradable liquid type of Appearance Clear/white
curing and sealing compound based on acrylic Curing efficiency 85±5% (BS 7542)
resins and proper wetting agents. It is supplied Density, [g/cc] 0.95±0.05 ASTM D 1475
as a single component liquid (white or clear). Standards ASTM C309 Type1&2 Class B
Oxicure WB90 is applied by spray to fresh ASTM C 156: 1998, ASTM C-944
cementitious surfaces at a coverage rate of and BS 7542
5.0m² per litre. It creates a continuous film-
forming, moisture barrier; which ensures Preparation
optimum cement hydration, improved concrete Oxicure WB90 should be gently stirred immediately
PRODUCT DATA SHEET
durability and reduced shrinkage. prior to use to ensure uniformity of the material as
applied.
Advantages
• Dual protection as curing and sealing com- New Concrete
pound. Application to freshly placed concrete should not
• Protects concrete from wafer borne chlorides, begin until the surface is free from water, and should
sulphates and atmospheric carbon dioxide. not commence at all if bleed water is apparent.
• Economical, Labour saving, Easy to apply. Oxicure WB90 should be applied as soon as practically
possible after removal of shuttering, and whilst the
• Clear and white pigmented types available.
concrete surface is still damp. However, any traces of
• UV, chemical and abrasion resistant
laitance, grout runs or loose material should be
removed.
Uses
A cost effective curing compound as well as
Application Method
surface sealer for fresh and existing concrete. An
Application should not begin until the concrete is free
effective alternative to hessian, water or
from surface water, and should not commence at all if
polyethylene curing aids. Oxicure WB90 is
bleed water is apparent on the concrete surface.
suitable for use on all concrete surfaces and acts
Oxicure WB90 can be applied by spray, brush or roller.
as a more effective and economical alternative
When first applied, the product forms a non-
to separate curing, priming systems.
penetrating white coating across the concrete surface.
The coating cures to form a white or clear film
• In high rise construction to eliminate the re-
according to which version of Oxicure WB90 is used.
quirement for water.
which then provides the moisture barrier to enable
• In areas subjected to high drying winds which
effective, concrete curing. The applied film should not
require continuous curing.
be trafficked until fully dry, and care should be taken
• Surfaces, which requires subsequent finishes. to ensure that the film is not broken.
Oxicure WB90 should be removed from tools,
equipment and mixers with clean water.
Al Majara Polychem Industries LLC
P.O. Box. 66507 | Sharjah | UAE |
Tel +971 6 5360700 | Fax +971 6 5360701
Email : info@[Link] |[Link]
Waterproofing | Construction Chemicals | Floor Coating |Protective Coating| Concrete Repair Products | Joint Filler
OXICURE WB90
Subsequent finishes Shelf life
The resin used in Oxicure WB90 allows direct When stored in warehouse conditions below 35ºC,
application of many floor coverings and paint Oxicure WB90 has a minimum shelf life of 12 months
systems, as given typically below:
• Water based emulsion paints containing PVA, Information
PVC, acrylic co-polymers. Al Majara Polychem Ind LLC products are guaranteed
• Bituminous emulsions and solutions against defective materials and are sold subject to
• Thin section polymer modified cement standard terms and condition of sale, copies of which
systems are available on request which are reasonable care it’s
• Epoxy resin coatings which do not rely on taken compiling this technical data sheet, all
penetration for substrate bond recommendations regarding the use of product are
PRODUCT DATA SHEET
• Polyurethane coating made without guarantee since the conditions used are
• Water and solvent based acrylic coatings beyond the company’ direct control. It is the customer
responsibility to satisfy themselves that each product
Limitations is fit for the purpose for which they indent to use it.
• Oxicure WB90 should only be applied within
Quality Matters
the temperature range of >5°C and <50°C
All products originating from Al Majara Polychem Ind.
• Any concrete surfaces which receive
treatment with Oxicure WB90 should not be LLC are manufactured under a management system
disturbed until the concrete has gained independently certified to conform to the
enough strength to bear surface loading. requirements of the quality, environmental and
• Oxicure WB90 should not be exposed to occupational health & safety standards ISO 9000,
moving water, or rain, during application or ISO 14001 and OHSAS 18001.
before it has become tack free.
• Oxicure WB90 has been tested for bond to
subsequent finishes and found to perform
satisfactorily. However, many variations of
each individual type of finish exist and it is not
possible to test each one. It is therefore
recommended that an onsite bond test is
carried out to determine absolute suitability
• Not recommended for areas intended for
heavy traffic or immersed conditions.
Packaging
20 and 200 litres
Al Majara Polychem Industries LLC
P.O. Box. 66507 | Sharjah | UAE |
Tel +971 6 5360700 | Fax +971 6 5360701
Email : info@[Link] |[Link]
Waterproofing | Construction Chemicals | Floor Coating |Protective Coating| Concrete Repair Products | Joint Filler
