B12 COMPACT BRAZED
HEAT EXCHANGER
Measurements(mm) Tolerance
A 287 +2 /-2
B 117 +1 /-1
C 234 +1 /-1
D 63 +1 /-1
E 27.1 (opt. +1 /-1
45.1)
F 4.4+2.34xNP +0.5% /-1.5%
G 6 +1 /-1
R 22
Port size F/P: 33mm
Experience the true
original: the B-type
The large-port B12 offers
compact heat transfer
solutions for applications with
large flows. The special
channel plates have
alternating chevron patterns
for optimal heat transfer
between media with different
viscosities. The B12 is ideal
for demanding steam and air
dryer applications.
CBE port denomination
Easy to choose the right
product solution
With SWEP's unique SSP
CBE, the SWEP Software STANDARD CONNECTIONS
Package, you can do
advanced heat transfer For specific dimensions, or information about other types of
calculations yourself, and connections, please contact your SWEP sales representative.
choose the product solution
that suits your application
best. It's also easy to choose
connections and generate
drawings of the complete
product. If you would like
advice, or you would like to
discuss different product Externally Soldering
Threaded Connections
solutions, SWEP offers all the Connections (Sweat
service and support your (Male) Connections)
need.
TECHNICAL DATA MATERIAL DISCLAIMER
THIRD-PARTY APPROVALS
Max working pressure at 155ºC Inner circuit: 31 bar (450psi) The information and recommendations
(selection) (311F): Outer circuit: 31 bar (450psi) in regards to the products are
Europe, Pressure Equipment Max working pressure at 225ºC Inner circuit: 27 bar (392psi) presented in good faith, however,
Directive (PED 97/23/EC) (437F): Outer circuit: 27 bar (392psi) SWEP makes no representations or
Test pressure: 50 bar (725psi) warranties as to the completeness or
For additional information Min temperature: -196ºC (-321F) accuracy of the information.
Max temperature: 225ºC (437F) Information is supplied upon the
please contact your local Max number of plates (NoP) 140 condition that the purchasers will make
SWEP representative. SWEP CBE weight 1.442+NoPx0.12kg their own determination as to the
reserves the right to make (3.2+NoPx0.3lbs) products' suitability for their purposes
changes without prior notice. Hold-up volume: inner circuit (NoP/2-1)x0.063 litres prior to use. Purchasers should note
((NoP/2-1)x0.002 gal.) that the properties of the products are
Plate material: Parts in contact with fluid: both application and material selection
AISI 316 dependent and that products
Parts not in contact with fluid: containing stainless steel, both 316
AISI 304 and 304 families, are still subject to
Brazing material: Pure Copper corrosion if used in unsuitable
Standard connection material AISI 316 environments. Purchasers should also
be advised that stainless steel from the
304 family can be more sensitive in
CAPACITY GRAPH regards to corrosion than stainless
steel from the 316 family. By
purchasing products displayed here
upon SWEP disclaims all responsibility
due to corrosion of the products and/or
other materials attached to the
products and also for any damages
resulting from the use of the products.
SWEP INTERNATIONAL AB
Box 105, SE-261 22 Landskrona, Sweden
Phone +46 418 40 04 00
Fax +46 418 292 95
Internet: [Link]
E-mail: info@[Link]
Printed 2009-04-02
