0% found this document useful (0 votes)
179 views4 pages

Isuzu Rodeo/D-Max 3.0D Turbo Specs

The document provides detailed specifications and maintenance information for the Isuzu Rodeo/D-Max 3.0D Turbo, including engine parameters, lubrication requirements, and tightening instructions for various components. It outlines the engine code 4JH1-TC, power output of 96 (130) at 3800 RPM, and various oil grades and classifications for different climates. Additionally, it includes notes on oil usage and tightening torque for various parts of the vehicle.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
179 views4 pages

Isuzu Rodeo/D-Max 3.0D Turbo Specs

The document provides detailed specifications and maintenance information for the Isuzu Rodeo/D-Max 3.0D Turbo, including engine parameters, lubrication requirements, and tightening instructions for various components. It outlines the engine code 4JH1-TC, power output of 96 (130) at 3800 RPM, and various oil grades and classifications for different climates. Additionally, it includes notes on oil usage and tightening torque for various parts of the vehicle.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Phone:

Fax:
VAT Registration No.:

Notes Specified value Measured value


Vehicle identification
Number of cylinders Type4/OHV
Displacement cc2999
Compression relation 118,3
Injection system
Air meter Air mass flow type
Injection/fuel pump Bosch Brand
Injection/Fuel Pump TypeVP 44
Type of pump Common-Rail
Injection order 1-3-4-2
Injector Bosch Brand
Opening pressure of the injector nozzle -
bar338/195
nuevo/usado
Regulation and emissions
Crankshaft position (n = DPMS) °APMS0
Special tool /
Adjustment method Motor/pump
Special tool
Idle regime rpm700±25
Idle regime - alternative rpmAC=800±25
Nominal speed no load rpm4550-4650
Oil temperature °C80
Smoke opacity - EU limit m-1 (%)3.00 (73)
Smoke opacity - homologation value m-1 (%)2.00 (58)
Startup and load
V/reserve capacity
Battery 12
(Ah)
Maintenance and settings
Valve timing - INTAKE mm0,40 cold
Valve train - EXHAUST mm0,40 cold
Compression pressure bar22,0-31,0
Radiator cap bar0,90-1,20
Open thermostat (primary/secondary) °C82
Lubricants and capacities
Alternative motor oils
Ambient temperature range Cold weather
Motor oil grade SAE10W/30
Classification of motor oil API/ACEACF/B3

Manufacturer:Isuzu Model: Rodeo/D-Max 3.0D Turbo (c) Autodata Limited 2009


Engine code: 4JH1-TC Power: 96 (130) 3800 Valid forever. 21-10-2016
Regulated for: Year: July 2003 V8.500-
Ambient temperature range Moderate climate
Motor oil grade SAE10W/40
Motor oil classification API/ACEACF/B3
Alternative for climate
Ambient temperature range
moderate
Motor oil grade SAE10W/30
19 Classification of engine oil API/ACEACD/B2
Ambient temperature range Warm climate
Grade of the engine oil SAE15W/40
Classification of motor oil API/ACEACF/B3
Motor with filter(s) liters 6.2
Other lubricants and capacities
53 Degree of the manual transmission oil SAE5W/30 Synthetic
Classification of gearbox oil
SG
manual
Manual transmission liters 2.9
Automatic transmission fluid Type Dexron III
52 Degree of the front differential oil SAE85W/140 Synthetic
51 Classification of the front differential oil GL-5
50 Front differential/automatic transmission liters 1.4
Grade of the rear differential oil SAE85W/140 Synthetic
Classification of the rear differential oil GL-5
Rear differential litros2,4
Transfer case oil grade SAE5W/30 Synthetic
Classification of transfer case oil SG
Transfer box liters 1.3
Cooling system liters10
Brake fluid TypeDOT 4
Power steering fluid Type Dexron III
Power steering fluid liters 1.0
Clamping pairs
Stock instructions
Head
Replace screws No
Stage 1 Tighten 25 Nm
Stage 2 Tighten to 50 Nm

Stage 3 Press 60°-75°


Stage 4 Tighten 60°-75°
Other tightening pairs
Crankshaft bearings Replace screws/nuts No
Crankshaft bearings Phase 184 Nm
Crankshaft bearings Phase 2167 Nm
Connecting rod bearings Replace screws/nuts Yes
Connecting rod bearing Phase 130 Nm
Connecting rod bearings Phase 245°-60°
Oil pump to cylinder block 20 Nm
Oil pan screws 20 Nm
Oil pan drain screw 45 Nm
Flywheel/transmission disc 118 Nm

Manufacturer:Isuzu Model: Rodeo/D-Max 3.0D Turbo (c) Autodata Limited 2009


Engine code: 4JH1-TC Power: 96 (130) 3800 Valid forever. 21-10-2016
Regulated for: Año: July 2003 V8.500-
Autodata Note 19

If an ACEA B2 oil is used, the appropriate review program for B2 oil must be employed.

Autodata Note 53

Autodata Note 52

Manufacturer:Isuzu Model: Rodeo/D-Max 3.0D Turbo (c) Autodata Limited 2009


Engine code: 4JH1-TC Power: 96 (130) 3800 Valid forever. 21-10-2016
Regulated for: Year: 2003-07 V8.500-
Autodata Note 51

Autodata Note 50

Autodata Note 15

Screws = 106-126 Nm
Nuts = 198-242 Nm

Autodata Note 49

Autodata Note 43

Cylinder arrangement Bolt tightening order

Manufacturer:Isuzu Model: Rodeo/D-Max 3.0D Turbo (c) Autodata Limited 2009


Engine code: 4JH1-TC Power: 96 (130) 3800 Valid forever. 21-10-2016
Regulated for: Year: July 2003 V8.500-

You might also like