TV-FM-AM antenna Mark 22CA

Mark 22CA is an omni-directional wide band antenna

(0.1-30 and 40-860 MHz) TV-FM-AM, for maritime
purposes. It is based on a construction of circular
dipoles coupled to an amplifier via a
broadband filter.
Mark 22CA is made of ABS plastic
and filled with polyurethane foam.
Mounting base in saltwater proof
special alloy and bolts in stainless
acid-proof steel.
Mark 22CA is tested by “Det
Norske Veritas” for the same
approval as for radar
equipment.
The advantages of Mark 22CA
compared to an Yagi antenna system are:

• Rigid, non-corrodible, maintenance free

construction

• Small dimensions and easy to mount.

• Omni-directional, no adjustments.

• Replaceable amplifier.
TECHNICAL SPECIFICATIONS
Frequency range: 0.1-30 MHz and 40-860 MHz
Gain: 14-25 dB
Noise factor: 6.0 dB
Max. output level: 111 dBµV
(2 signals -50db IMA)
Output impedance: 75 ohm
Supply voltage: 15 V DC
Current consumption: approx. 150 mA
EMC: EN 50082-1, 55024-2, 55024-4
Operation temp. range: -40 - +70°C
Wavetraps: 156 MHz VHF (radiptelephone)

Weight: 3 kg
0210

Material: ABS plastic white (grey on special order)

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail:sales@[Link] [Link] 3002
© Copyright 1993 Naval Electronics AB
 TV-FM antenna Mark 22CA
TV-antenna
Replaceable amplifier
Same colour

BNC-connectors

Antennas are as standard delivered amplifier. Compress the rubber covers and
with the amplifier mounted and sealed secure with vulcanizing silicon rubber
with silicon compound. The coaxial [Link] antenna should be mounted as
cable is supplied with a female high as possible and also as far away as
connector wich must be carefully possible from transmitting antennas and
sealed after connecting the replaceable radars to avoid interferences.

All measures in mm.

Mounting of cableholder.

Order No. 250.040 Weight: 5.5 kg

Standard package: 1
Volume: 59 cdm
 Cabinet CA 3050

Steel cabinet fitted with drilled holes for

cassette modules. Door on front with right-hand
hinges with grounding wire. Bottom flange
bolted to cabinet. Cabinet type CA 3050 for
power box and up to six (6) cassette modules.
The cabinet is delivered with one cable outlet
flange (plastic) and one vented flange (metal).
Colour: grey

Size: (H) 300 mm x (W) 500 mm x (D) 200 mm

0410

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail:sales@[Link] [Link] 6122
© Copyright 1997 Naval Electronics AB
 Cabinet CA 3050
Mechanical measurements

Installation manual
The cabinet should be mounted vertically on a
wall with four (4) screws. Install the cabinet in a
dry, well ventilated space. Ambient temperature
must not exceed 35oC/95oF.
The cabinet should be earthed either to the
electrical system or to the hull-not to both.
Flange cable outlet Pg11.

Order No. Weight: 6.5 kg

201.364 Standard package: 1
Volume: 30 cdm
 Tap-off TO2F & Tap-off TO4F
Naval tap-offs TO4 and TO2 have been
designed especially for marine use and
the complete TV/Radio frequencies of
0.1–1000 MHz worldwide. In order to avoid
interference due to connection between the
splitter and the ship’s hull, the splitter base
is manufactured in plastic to make
it double isolated.
Unused outputs of tap-offs do not need
to be terminated. The last line output has to
be terminated with 75 Ohms terminating
connector (e.g. 500.207).

Size: (H) 57 mm x (W) 75 mm x (D) 30 mm

Holes: 4 x 4.0 mm
TECHNICAL SPECIFICATIONS
Tap-off TO4F 4-ways with F-connectors
TO4F-12 TO4F-17 TO4F-21
Frequency range: 0.1–1000 MHz 0.1–1000 MHz 0.1–1000 MHz
Tap loss: 12.5 dB 17 dB 21 dB
Through loss: 4.5 dB 3.5 dB 3.5 dB
Tap-off TO2F 2-ways with F-connectors
TO2F-12 TO2F-17
Frequency range: 0.1–1000 MHz 0.1–1000 MHz
Tap loss: 12.5 dB 17 dB
Through loss: 1.5 dB 1.5 dB
Electrical
Directional isolation: >17 dB
Isolation, TV-TV: >36 dB
Return loss: >20 dB
Screening factor: 75 dB
Impedance: 75 Ohm
Operating temp: -40°C – +60°C
CE specifications according to EN50082-1, EN 50081-1,
DIN V VDE 0855 part 10
Return loss 20 dB from 40 MHz–1.5 dB/octave
Below 5 MHz the spec may vary
Mechanical
Weight: 150 g
Material of product housing: Zn95.38 Cu0,586 Ni0.0147 Sn0.0027
Connector: Phosphor bronze Sn plated.
Insulator: ABS 94HB BLACK RAL9005 Size: (H) 57 mm x (W) 75 mm x (D) 30 mm
Mechanical specification value of F-connector Standard: according to IEC 169-24 Holes: 4 x 4.0 mm
12G(U.S.A)8 Range of adopted cable’s central pin: Ø0.4–Ø1.2 mm.
Pull Force: Min. 0.5N
Application: ETS 3000019
Protection: IP50 (same as DIN40050)
Storaging temperature: -40…. +80°CLabel: Background: gray similar to RAL 7032
Text: black RAL 9005
0508

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail:sales@[Link] [Link] 8101
© Copyright 1997 Naval Electronics AB
 Tap-off TO2F & Tap-off TO4F

CA-0286 CA-0287 CA-0305 CA-0306

IN IN OUT
C3 C6 C11

C3 C8 C11
R2 R5 R7 R3
C1 C2 C6 C7
R3 R6 C1 C2 C5 C7 C9 C10
R4
C12 R2
R1 C4 C5 R4 C9 C10

TAP1
C4 C8
R1
R5
TAP2
TAP1 TAP2
CA-0288 CA-0289

C18

C15 C21 C24

R9 R14
R12
C13 C14 C19 C20
R10 R13

C16 C17 C22 C23

R8 R11
TAP3

TAP4

OUT

75.0
75.0
65.0
65.0
28.0
14.0
32.3

32.3
56.5

38.0
28.0

56.5

38.0
28.0

4-4.5 38.4 4-4.5 38.4

HOLES HOLES

76.8
5-3/8"-32-2A UNEF
39.0

2-R2.25
27.0
17.9
16.0

16.0
8.9
4.0

4.5
65.0

Tap off TO4F: TO4F-12 Order No. 201.552

TO4F-17 Order No. 201.550
TO4F-21 Order No. 201.553
Tap off TO2F: TO2F-12 Order No. 201.554
TO2F-17 Order No. 201.551
Shipping weight: 0.2 kg
Standard package: 1
 Splitter SP4F & Splitter SP2F

Naval splitters SP2F and SP4F have been

designed especially for marine use and the
complete TV/Radio frequencies of
0.1–1000 MHz worldwide. In order to avoid
interference due to connection between the
splitter and the ship’s hull, the splitter base is
manufactured in plastic to make
it double isolated.

Size: (H) 57 mm x (W) 75 mm x (D) 30 mm

Holes: 4 x 4.0 mm

TECHNICAL SPECIFICATIONS
Splitter SP4F with F-connectors
Frequency range: 100 kHz–1000 MHz
Splitter loss: 8 dB

Splitter SP2F with F-connectors

Frequency range: 0.1–1000 MHz
Splitter loss: 3.5 dB

Electrical
Isolation, TV-TV: > 20 dB
Return loss: > 20 dB
Screening factor: 75 dB
Impedance: 75 Ohm
Operating temp: -40°C – +60°C
CE specifications according to EN50082-1, EN 5008-1,
DIN V VDE 0855 part 10
Return loss 20 dB from 40 MHz–1.5 dB/octave
Below 5 MHz the spec may vary

Mechanical
Weight: 150 g
Material of product housing: Zn95.38 Cu0.586 Ni0.0147 Sn0.0027
Connector: Phosphor bronze Sn plated.
Isolator: ABS 94HB BLACK RAL9005
Mechanical specification of F-connector Standard: according
to IEC 169-24 12G(U.S.A)8 Range of adopted cable’s central
pin: Ø0.4–Ø1,2 mm. Pull Force: Min. 0.5N
Size: (H) 57 mm x (W) 75 mm x (D) 30 mm
Application: ETS 3000019 Holes: 4 x 4.0 mm
Protection: IP50 (same as DIN40050)
Storaging temperature: -40…. +80°C
Label: Background: gray similar to RAL 7032 Text: black RAL 9005

All outputs not used have to be terminated with a 75 Ohm terminating connector
(e.g 500.207).
0508

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail:sales@[Link] [Link] 8102
© Copyright 1997 Naval Electronics AB
 Spliter SP4F Splitter SP2F
OUTPUT1
All outputs not used have to be terminated with All outputs not used have to be terminated with
a 75 Ohm terminating connector a 75 Ohm terminating connector
(e.g 500.207). CA-0283 (e.g 500.207).
CA-0282
R1 OUTPUT1
C1 C3
CA-0280
R3
INPUT CA-0195
INPUT OUTPUT2
CA-0281 R1
C5 OUTPUT3
C1 C2
CA-0283
CA-0282
OUTPUT2
R2
C2 C4

OUTPUT4
75.0 75.0
65.0 65.0

28.0 14.0

32.3
32.3

56.5

38.0
28.0
56.5

38.0
28.0

4-4.5 4-4.5
HOLES HOLES

Template Scale 1:1

(SP4F&SP2F)

38.4 5-3/8"-32-2A UNEF

39.0

2-R2.25
27.0
17.9
16.0

16.0
8.9
4.0

4.5
65.0

Splitter SP4F: Order No. 201.555 Shipping weight: 0.2 kg

Splitter SP2F: Order No. 201.556 Standard package: 1
 Line amplifier PSA 350-1/2
The PSA 350-1/2 line amplifier is designed to Like other Naval products, the PSA 350
amplify radio and TV signals for distribution series are designed to meet the special
in a medium-sized network. PSA 350-1/2 with requirements of world-wide marine use.
an additional RA-18 plug in module can also See overleaf for further details of specific
be used for interactive systems. The power applications.
supply accepts 117 and 230 VAC.

Size: (H) 165 mm x (W) 230 mm x (D) 85 mm

TECHNICAL SPECIFICATIONS
General Output level at 129 NTSC chs (102 dBµV)
Operation temperature range: -40 – +55C° CSO: -55 dBOutput level
Indoor use only. CTB: -50 dB
Humidity: <95% non condensing XMOD: -57 dB
EMC: EN 50083-2 Attenuation 0.1–30 MHz: 0–13 dB
Safety: EN 60065 Attenuation 40–890 MHz: 0–18 dB
Weight: 2.6 kg Tilt adjustment 40–890 MHz: 0–18 dB
Electrical Return Loss: 20 dB at 40 MHz (-1.5 dB/octave)
Input voltage: 117/230 V AC +10/-15%, 50–60 Hz Current consumption: 400 mA
Input/Output impedance: 75 ohm Attenuation 0.1–30 MHz: 0–13 dB
Connectors: 5/8–24 (F-adapters optional) Attenuation 40–890 MHz: 0–18 dB
Frequency range: 0.1–30, and 40–890 MHz Tilt adjustment 40–890 MHz: 0–18 dB
Gain 40–890 MHz: Operating gain: Min. 30 dB
Full gain: 34 dB RETURN/INTERACTIVE UNIT RA-15
Gain 0.1–26.5 MHz: Min. 15 dB
Frequency range: 5–25 MHz
Noise figure: Max. 7 dB
Gain:* 15.5 dB*
Output level, 2 sign 60 dB IMA: Max. 120 dBµV
Attenuation: 0–13 dB
Flatness: ±0.5 dB
Fixed slope: 6±1 dB
Output level (for reference): 105 dBµV 4chs
Noise figure: 8 dB nor.
Return loss: 15 dB
0511

* 0 dB (RB-0A) return bridge 5-25 MHz can be supplied on special request

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail: sales@[Link] Web:[Link] 5004
© Copyright 2000 Naval Electronics AB
 Line amplifier PSA 350-1/2
Examples of possible PSA 350 configurations 350 amplifier works well as a line amplifier with the
The PSA 350 amplifier features low noise and is AM plug in unit,or as a subamplifier in larger installa-
designed to operate in difficult conditions at sea, tions equipped with the CAS 3000 main system. The
with wide variations in the input signal. The PSA PSA 350 can also be used in an interactive system
eg. Pay TV, videogames a.s.o

GAIN THERMAL AMP

CONTROL EQ AMP COMPENSATOR (HYBRID)

MA-18 MS-86/18

ATT TEST POINT

TEST -20dB
POINT
-20dB

INPUT OUTPUT LINE OUT

LINE IN MODULE H H MODULE
L L
TO-*/0A TO-*/0A
AM PLUG IN MODULE (-1), AM-20
OR
INTERACTIVE PLUG IN MODULE (-2), RA-18
OPTIONAL
LINE B
(ORDER NO: SEE BELOW)

POWER SUPPLY
230/117 VAC
(DOUBLE ISOLATED)

Power supply is approved for class II operation

but is equipped with grounded cable as standard

Use as line amplifier

The PSA 350 is also well suited as
sub-amplifier in larger systems or as an
interactive unit e.g for Pay TV a.s.o.

Description Order No. Type

PSA 350-1 201.171 AM-FM-TV Line amplifier
PSA 350-2 201.172 FM-TV Line amplifier incl. interactive unit eg. RA-18B
PSA 350-3 201.173 FM-TV Line amplifier incl. return bridge eg. RB-0A
Shippingweight: 2.9 kg Standard package: 1, Volume: 4 dm3
 Power supply and Amplifier PSA 350
The PSA 350 power supply and amplifier The attenuation of each band can be
is designed to supply power to Mark and separately controlled. Like all other Naval
VPA series active antennas as well as products, the PSA 350 series are de-
amplifying radio and TV signals for distri- signed to meet the special requirements
bution in a medium-sized network. The of world-wide marine use. See overleaf for
power supply accepts 117 and 230 VAC. further details of specific applications.

TECHNICAL SPECIFICATIONS Size: (H) 165 mm x (W) 230 mm x (D) 85 mm

General
Operation temperature range: -40 – +55C°
Indoor use only.
Humidity: <95% non condensing
EMC: EN 50083-2
Safety: EN 60065
Weight: 2.6 kg
Electrical
Input voltage: 117/230 VAC +10/-15%, 50–60 Hz
Output to antennas: 15VDC ±5%, Max 300 mA
Input/Output impedance: 75 ohm
Connectors: F or 5/8–24, depending on model
Frequency range: 0.1–30, and 40–890 MHz
Gain 40–890 MHz: Operating gain: Min. 27 dB
Full gain: 34 dB
Gain 0.1–26.5 MHz: Min. 15 dB
Noise figure: Max. 7 dB
Output level, 2 sign 60 dB IMA: Max. 120 dBµV

Output level 129 NTSC chs: 102 dBµV

Output level CSO: -55 dB
Output level CTB: -50 dB
Output level XMOD: -57 dB
Attenuation 0.1–30 MHz: 0–13 dB
Attenuation 40–890 MHz: 0–18 dB
0511

Tilt adjustment 40–890 MHz: 0–18 dB

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail: sales@[Link] Web:[Link] 5003
© Copyright 2000 Naval Electronics AB
 Power supply and Amplifier PSA 350
The PSA 350 can typically supply 8–16 TV/ The PSA 350 amplifier works well in stand-
Radio outlets, depending on cable lenghts. The alone medium-sized systems, or as a
amplifier features low noise and is designed to subamplifier in larger installations equipped
operate difficult conditions at sea with wide with the CAS 3000 main system.
variations in the input signal.
12 TV/radio outlets

16 TV/radio outlets

Ch38

Description Order No. Type

PSA 350 201.170 AM-FM-TV power supply amplifier incl VTR input
Shippingweight: 2.9 kg Standard package: 1, Volume: 4 dm3
 PSA 30V Power supply and Amplifier
The PSA 30V modular power supply and antenna cut out relay function.
amplifier is designed to supply power to The power supply accepts 24 V DC and
the Mark and VPA series active antennas 117/230 V AC. As with all other Naval prod-
as well as amplifying radio, TV and VTR ucts, the PSA 30V series is specifically
signals with fitted plug-in modules. Factory designed for the special requirements
fitted plug-in modules are available in three needed for world-wide marine use. For more
versions for the PSA 30V in addition to the details on different applications see overleaf.
basic power supply. PSA 30V has a

Size: (H) 160 mm x (W) 230 mm x (D) 85 mm

TECHNICAL SPECIFICATIONS
General
Operating temp. range: -40 to +55°C Gain 0.1–26.5 MHz, PSA30-1: 10 dB
Indoor use only. Gain 0.1–26.5 MHz, PSA30-2: -2 dB
Humidity: <95% non condensing Att. of antenna sign. at VTR freq: 30 dB
EMC: EN 50082, EN 55024 Manual attenuation 0.1–110 MHz: 0–20 dB
Safety: EN 60065 (IEC 65) Manual attenuation 170–890 MHz: 0–20 dB
Input voltage: 24 V DC ±17% Max. output level, 2 signals: 105 dBµV, 3:rd order IMD
117/230 VAC +10/-15%, 50–60 Hz Noise figure: 7 dB
Antenna output: 15 V DC±5%, max. 300 mA
Antenna cut-out relay function: Input 12–24 V DC PSA 30V-3, AM-FM
Weight: 2.1 kg Frequency range: 0.1–26.5 and 68–110 MHz
Gain: 23 dB
PSA 30V-1, AM-FM-TV and Manual attenuation 0.1–26.5 MHz: 0–20 dB
PSA 30V-2, FM-TV with AM feed through Manual attenuation 68–110 MHz: 0–20 dB
Frequency range: 0.1–26.5 and 40–890 MHz Max. output level, 2 signals: 105 dBµV, 3:rd order IMD
Gain 40–110 MHz: 17 dB Noise figure: 7 dB
Gain 170–890 MHz: 20 dB
Gain VTR (ch. 38, 607.25 MHz): 14 dB The unit can be used as a power supply without amplifier.
0510

It is then designated PSA 30V.

Since 1971, the objective of Naval Electronics has been to offer the
best possible products for TV and Radio reception at sea. Naval
began with omnidirectional antennas and is the world leader in this
field of technology today. Now, with an expanded product range, the
name Naval means much more than antennas. Naval operates in
more than 40 countries and has installations on thousands of Naval Electronics AB
vessels all over the world. Höjdrodergatan 18, SE-212 39 Malmö, Sweden
Tel. +46(0)40-29 20 45. Fax +46(0)40-18 74 13
All specifications stated are subject to change without notice. E-mail: sales@[Link] Web:[Link] 5001
© Copyright 1999 Naval Electronics AB
 PSA 30V Power supply and Amplifier
Examples of different
configurations for PSA 30V.
The PSA 30V with amplifier modules can
typically supply 4–10 TV outlets and up to 16
radio outlets depending on cable lengths and
modules used. The amplifier features a
separate VTR input and good intermodulation
characteristics. In order to manage earth faults
common in a marine environment the
amplifier’s internal ground can be galvanically This is a common version for 4 –8 radio and TV outlets.
separated from external ground by removing a The number of outlets depend on the cable lengths in each
branch according to the diagram above.
jumper.
The PSA 30V-1 is normally used when a
higher gain is required on AM together with a
passive AM antenna or Mark 22CA. The PSA
30V-2 is the preferred unit for most
installations with TV and radio. It works
particularly well with the VPA 30 active short
wave antenna. The PSA 30V-3 is an AM-FM
amplifier designed to keep second order
intermodulation products to a minimum. It´s
used for distribution of radio signals only.

The PSA 30V-2 is the preferred unit in most radio and TV

systems. It is similar to PSA 30V-1 but has AM feed through
instead of an AM amplifier. This is to achieve best possible
20m
PSA 30V R
TV 1 TV/Radio outlet results when used together with an active AM antenna such
e.g N1 as the VPA 30.

A small system with 1 TV outlet.

The PSA 30 can also be used to supply power to the antenna
and feed output to another amplifier.
Up to 16 Radio outlets e.g N1
R R R R
TV TV TV TV

20m TO4F
20m SP4F
Use as line amplifier
R R R R
TV TV TV TV

R
TV
R
TV
R
TV
R
TV
PSA 30V-3 SP2F
R
TV
R
TV
R
TV
R
TV

PSA 30V-1 TO4 SP4F

20m
TO4F
20m
SP4F

R R R R
TV TV TV TV R R R R
TV TV TV TV

The PSA 30-1 is the ideal line/sub amplifier in larger systems In this configuration with the AM-FM radio version up to
or when long cable lengths are required. 16 radio outlets can be connected.

Description Order No.

Complete units
PSA 30V 201150
PSA 30V-1 201160
PSA 30V-2 201161 Shippingweight: 2.3 kg
PSA 30V-3 201162 Volume: 3.5 dm3
Replacement modules
PM 30-1 201165
PM 30-2 201166 Weight: 60 g
PM 30-3 201167 Volume: 50 cm3