ELITE
SOLUTIONS
MAXIMUM FLEXIBILITY
WITHOUT COMPROMISE.
Our motivation to exceed expectations is you, our clients. Responding to the ever-
changing needs of our design associates for over 45 years, the Elite Solutions line has
expanded to answer your requests. We now offer centre and offset glazing pockets,
conventional and thin-profile framing for both single- and double-glazed requirements.
Elite Solutions can also adapt easily for both wrap around and flush mount construction.
The true versatility of this go-to system is open for you to design with, we’ll just make it
happen.
Elite Solutions offer essential elements; SELF SUPPORTING unique profiles for floor,
ceiling, horizontal and vertical posts and wall configurations. Our profiles harmonize
effortlessly with conventional construction, while offering durability and flexibility. Elite
profiles can adapt to serve as sidelight, screen, window or clearstory, inspiring long spans
without mullions for many applications. Elite Wall and Door programs integrate easily
with your space and footprint, simply paired with our PC350 Swing Glass Doors, offering
a variety of compatible hardware options and design, simplifying the specification
process.
Elite profiles can adapt to serve as sidelight,
screen, window or clearstory, inspiring long
spans without mullions for many applications
and is quick and easy to install. Elite Wall and
Door programs integrate easily with your
space and footprint, simply paired with our
wide range of PC350 Swing Glass Doors,
offering a variety of compatible hardware
options and design, simplifying the
specification process.
Elite Solutions framing profiles are cut on site
from common lengths and are often readily
available. Elite Solutions is one of the most field
adaptable systems on the market offering
optimal responsiveness. Varied building
conditions are not an obstacle, allowing
flexibility should any on-site discrepancies
occur.
SINGLE GLAZING
SIZING PROFILES FOR TRADITIONAL WRAP AROUND
Ceiling heights from 82” to 144” UNFINISHED – CONSTRUCTION
Base and ceiling frame 3 1/2” walls – 2 1/2” metal stud with 1 layer of 1/2”
1 3/4” frame & trim gypsum wall board both sides
Horizontal widths cut on site up to 144” 3 3/4” walls – 2 1/2" metal stud with 1 layer of 5/8”
gypsum wall board both sides
BUILDING ACCOMMODATION 4 5/8” walls – 3 5/8” metal studs with 1 layer of 1/2”
& ADJUSTABILITY gypsum wall board both sides
Ceiling adjustment range +/- 3/4” 4 7/8” walls – 3 5/8” metal studs with 1 layer of 5/8”
Floor adjustment range +/- 1” gypsum wall board both sides
Traditional wrap-around +/- 5/8” 5 1/2” walls - 3 5/8” metal studs with 2 layers 5/8”
Flush wall (Wall Start) +/- 1/2” gypsum wall board and 1 layer on the other side
6 1/4” walls – 3 5/8” metal studs with 2 layers of
DOORS 5/8” wall board both sides
2” Stile aluminum doors x 1 3/4” thick 7 1/4” walls – 6” metal studs with 1 layer 5/8”
3” Stile aluminum doors x 1 3/4” thick gypsum wall board both sides
5” Stile aluminum doors x 1 3/4” thick
1 3/4” Wood doors (by others) ELECTRICS
2” Wood doors (by others) – prepped for 1 3/4” offset Prep for most electric strikes, lock sets, electric
Aluminum doors can accommodate 1/4”, 3/8” & 1” hinges & power transfer units. Room booking
sealed units device wiring & Rex sensors can easily be run
through the frame.
GLASS OPTIONS
1/4” with glazing bead INTEGRATION
3/8” Match existing PC350 frames
1/2” Mixed with SRT sliding doors solutions
Laminate & tempered glass No wood blocking required in wrap around
installation.
STANDARD HARDWARE
Door pulls - Can be colour-matched to frame finish OPTIONAL ADD-ONS
Roller catch 4 5/8” & 6” Aluminum corner post – to match any
Adams rite MS1850 lock standard colour finish
Vertical & horizontal mullions.
DOUBLE GLAZING
SIZING PROFILES FOR TRADITIONAL WRAP AROUND
Ceiling heights from 82″ to 144″ UNFINISHED – CONSTRUCTION
Base and ceiling frame 4 5/8” walls – 3 5/8” metal studs with 1 layer of 1/2”
1 3/4” frame & trim gypsum wall board both sides
Horizontal widths cut on site up to 144” 4 7/8” walls – 3 5/8” metal studs with 1 layer of 5/8”
gypsum wall board both sides
BUILDING ACCOMMODATION
& ADJUSTABILITY ELECTRICS
Ceiling adjustment range +/- 3/4” Prep for most electric strikes, lock sets, electric
Floor adjustment range +/- 1” hinges & power transfer units.
Traditional wrap around +/- 5/8” Room booking device wiring & Rex sensors can
Flush wall (Wall Start) +/- 1/2” easily be run through the frame
DOORS INTEGRATION
2” Stile aluminum doors x 1 3/4” thick Match existing PC350 frames
3” Stile aluminum doors x 1 3/4” thick No wood blocking required in wrap around
5” Stile aluminum doors x 1 3/4” thick installation.
1 3/4” Wood doors (by others)
2” Wood doors (by others) – prepped for 1 3/4” STANDARD HARDWARE
offset Door pulls – can be colour matched to frame finish
Aluminum doors can accommodate 1/4”, 3/8” Roller catch
& 1” sealed units Adams rite MS1850 lock
GLASS OPTIONS OPTIONAL ADD-ONS
1/4” with glazing bead 4 5/8” & 6” Aluminum corner post – to match any
3/8” standard colour finish
1/2” Vertical & horizontal mullions
Laminate & tempered glass
ELITE SOLUTIONS
CENTER GLAZE POCKET DOUBLE GLAZE POCKET
OFFSET GLAZE POCKET 2" NARROW PROFILE
HEAD OFFICE
130 Nolan Court Markham, ONL3R 2V7 Canada
[Link] | info@[Link]
CANADA U.S.A CARIBBEAN
1-866-633-0233 1-844-409-2365 345-943-3463
info@[Link] [Link]@[Link] [Link]@[Link]
