Crompton Greaves Consumer Electricals Ltd.
Fan Division
Bethora Ponda – Goa, INDIA, 403 409
T Technical
T. I. Sheet No.
PS-G - 263-C
Specification
Rev. 1 –: Issued by : Design Dept. Date : 22.05.17
Rev. 2 –
Rev. 3 – Issued to :QA..Mktg, Pur. Prod. Sheet 1 of 2
Technical Specification For 1200mm STAR 220 C. Fan
5 Star Rated Fan
1) Brand Name : Crompton
Name of the Company Crompton Greaves Consumer Electricals Ltd., INDIA
1) Trade name : STAR 220 - Ceiling Fan
2) Blade sweep : 1200mm (48")
3) Fan motor : A. C. permanent capacitor single phase induction motor.
5) Capacitor rating : 1.7mfd. 440 Volts, 50Hz AC.
6) Rated Voltage : 220-240Volts, 50 Hz, single phase AC.
7) Test Voltage : 230 Volts, 50 Hz, single phase AC.
8) Rated frequency : 50 Hz
9) Rated power input at full speed : 50 Watts
10) Rated current at full speed : 0.24 A
11) Rated power factor : 0.9 lagging (min)
12) Rated speed in rpm : 360 RPM
13) Speed at 180 volts : 250 RPM
14) Rated air delivery in Cu.m / Min : 220 Cu.m / Min
15) Rated service value in Cum/min/ W : 4.4 Cum / min / W
16) No. of blades : Three
17) Type of blade leaf : 0.6 mm thick MS sheet
18) Type of regulator : Resistance type
19) No. of running positions : 5 + off positions
20) Type of switch : Rotary type
21) Speed : Min. 50% of full speed ( approximately)
22) Class of motor insulation : Class” E”
FOR INTERNAL CIRCULATION ONLY
Crompton Greaves Consumer Electricals Ltd.
Fan Division
Bethora Ponda – Goa, INDIA, 403 409
T Technical
Specification
T. I. Sheet No.
PS-G - 263-C
Rev. 1 –: Issued by : Design Dept. Date : 22.05.17
Rev. 2 –
Rev. 3 – Issued to :QA..Mktg, Pur. Prod. Sheet 2 of 2
Technical Specification For 1200mm STAR 220 C. Fan
5 Star Rated Fan
23) No of bearings : Two ball bearings.
24) Motor winding temp rise : Shall not exceed 75°C over an ambient of 40°C by
resistance method at 245 Volts
.
25) Insulation resistance : Shall not be less than two Mega Ohms tested with 500V DC
26) High voltage test : Shall withstand 1.5 Kv, 50 HZ AC between current
carrying and non – current carrying metal
parts without any flash over for one min
27) Leakage Current : Should not exceed 210 Micro - Amp.
28) Type of downrod : Length – 220 mm
29) Type of Top/Shackle cover : Moulded Poly propylene.
30) Finish : Stove enamel Paint/Powder coated.
31) Tolerance On Performance : Reference IS.- 374
A) Power Input : 47-51
B) Air Delivery : 220 Cu. m. Per min
C) Fan Speed : ± 5%
FOR INTERNAL CIRCULATION ONLY