The SIMATIC® S7 System Family
SIMATIC®
PCS 7
SIMATIC®
SIMATIC® NET
Software
SIMATIC®
HMI
SIMATIC®
SIMATIC®
PC
SIMATIC®
WinCC
SIMATIC®
DP
SIMATIC®
Controller
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.1
Objectives
Upon completion of this chapter the participant will ...
... have an overview of the SIMATIC® S7 system family
... be familiar with the S7-200™ and S7-300/400™ automation
systems
... have an overview of the modules available for these automation
systems
... understand the concept of "Totally Integrated Automation"
... be familiar with the SIMATIC® programming devices and the PC
requirements for working with STEP7
... be familiar with the tools of the STEP7 basic programming package
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.2
SIMATIC® Overview
SIMATIC® HMI SIMATIC® PG
SIMATIC® PC
SIEMENS
S IM A T IC O P 17
PG 740
K1 K2 K3 K4 K5 K6 K7 K8 H E LP
S H IF T
K9 K10 K 11 K12 K13 K 14 K15 K16
E S C
7 8 9 0
D E F A C K
4 5 6 .
A B C
IN S
1 2 3 S H IF T
D E L
H E L P E N T E R
MPI Network
SIMATIC® NET Industrial Ethernet
SIMATIC NET
PROFIBUS
SIMATIC®
Controller
SIEMENS SF I0.0 Q0.0 CP U 212
RUN I0.1 Q0.1
STOP I0.2 Q0.2
I0.3 Q0.3
I0.4 Q0.4
I0.5 Q0.5
I0.6
I0.7
SIMATIC
S7-200
PROFIBUS-DP
SIMATIC® DP FM
SV
ASI
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.3
S7-200 ™
S7-22x
S7-21x (older version)
EM 221
SIEMENS SF I0.0 I1.0 Q0.0 Q1.0 CPU 214 DI 8 x DC24V
RUN I0.1 I1.1 Q0.1 Q1.1 I.0
STOP I0.2 I1.2 Q0.2 I.1
I0.3 I1.3 Q0.3 I.2
I0.4 I1.4 Q0.4 I.3
I0.5 I1.5 Q0.5 I.4
I0.6 Q0.6 I.5
I0.7 Q0.7
I.6
SIMATIC
I.7
S7-200
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.4
S7-200™: Modules S7-21x series
EM EM CP
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.5
S7-200™: Modules S7-22x series
EM EM CP
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.6
S7-200™: CPU Design S7-21x Series
Outputs
Memory Card Mode Selector
Potentiometer
SIEMENS SF I0.0 Q0.0 CP U 212
RUN I0.1 Q0.1
STOP I0.2 Q0.2
I0.3 Q0.3
I0.4 Q0.4
I0.5 Q0.5
I0.6
I0.7
SIMATIC
S7-200
PPI Connection
Inputs Status Indicators Status Indicators
for Integrated DI/DO
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.7
S7-200™: CPU Design S7-22x Series
Outputs
Status
Indicators
Memory Card
Front access door
Mode Selector
PPI Connection Potentiometer
I/O Expansion
Status Indicators
for Integrated DI/DO
Inputs
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.8
S7-300™
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.9
S7-300™: Modules
PS CPU IM SM: SM: SM: SM: FM: CP:
(optional) (optional) DI DO AI AO - Counting - Point-to-Point
- Positioning - PROFIBUS
- Closed-loop - Industrial Ethernet
control
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.10
S7-300™: CPU Design
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.11
S7-400™
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.12
S7-400™: Modules
PS CPU SM: SM: SM: SM: CP FM SM IM
DI DO AI AO
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.13
S7-400™: CPU Design
Fault LEDs
Slot for Memory
Card
Mode Selector
MPI/DP
Interface
DP Interface
External Battery
Supply
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.14
Programming Devices
Field PG
Power PG
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.15
PG/PC Requirements for Installing STEP 7
Operating system: Windows (all, except Win 3.1 and 3.11)
95/98 ME NT 2000/XP
Processor >= 80486 >= P150 >= Pentium >= P233
RAM >= 32 MB >= 64 MB >= 32 MB >= 128 MB
Memory on the
Hard Drive: depending on the installation, between 200 MB and 380 MB
plus 128 to 256 MB minus the working memory for
Windows Swap File
Mouse: yes
Interfaces: CP5611 (PCI) or
CP5511 / CP5512 (PCMCIA) or
PC adapter
Programming interface for Memory Card (optional)
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.16
Installing STEP 7 Software
SIEMENS
PG 740
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.17
Result of Installation
Double-click on icon
Activate through Start menu
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.18
STEP 7 Tools
SIMATIC® S7 Date: 03.09.2018 SITRAIN Training for
Automation and Drives
Siemens AG 2003. All rights reserved. File: SERV1_01e.19
