ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

1 LT PANELS :
Panels as per technical specifications & schematic diagram.
Supply, Installation, Testing and Commissioning of Indoor type LT Switchboards,
Floor mounting type, Bottom/Top entry. Refer enclosed SLD for component details.
Doors:2mm Body:2mm Gland:3mm covers and partitions:1.6mm. IP class:IP43 for
Indoor/IP54/64 with weather proof enclosure for outdoor shall be as per IS:13947-
1993. Shade: Epoxy powder coated RAL 7032. Bus bar insulation: Bus bars shall be
provided with heat shrinkable sleeves with color coding and the copper bus bars
shall be coated with tin.
Note:
1. The Panel shall be fully as per the requirement of Electrical Inspectorate/ EB
authorities.
Auxiliary contactor to be provided along with auto-manual switch where ever
required. CTs shall be of cast resin type only.
All MCCBs of 250A and above will be microprocessor based only.
The current density for Aluminium busbars shall be 0.8 per [Link] & Copper
busbars shall be 1.2 only.
Auxiliary Relay Shall be provided for all the incomers/ Sub incomers for
ON/OFF/TRIP status Monitoring
All measuring instruments (Meters) shall be of digital electronic with LED of
approved make and compatible with BMS. 2NO + 2NC potential free contacts,
connectors, contactors with wiring etc are to be provided for BMS.
Base frames, mounting stands to be considered where ever applicable.
Panels to be designed as per enclosed Main Single Line Diagram

1.1 LT MSB-1 WITH APFCR Nos.

1.2 LT MSB-2 WITH APFCR Nos.

1.3 UPS OUTPUT PANEL Nos.

1.4 UPS OUTPUT PANEL Nos.

MSEDCL Liasioning Work. ( For Additional Load & Upgradation of MSEDCL Meters
& Panel)
Liasioning charges with M.S.E.D.C.L. & Other Department from
file submission to Load Sanction.
'METERING PANEL ( MSECDL APPROVED DUAL SOURCE METER)
1.5 Lot
(Rates Should Be Given Including Overhead Charges.)
Office No-101 Sanction load -115 kw, Additional Load -34 kw
Total Load - 149 Kw
Office No-102 Sanction load -107 kw, Additional Load -42 kw
Total Load - 149 Kw

SUB TOTAL

2 ENCLOSURES & ISOLATORS

Supply, Installation, Testing and Commissioning of the following polycarbonate/ MS
enclosures with MCB/ Isolators and required accessories as per the site conditions.
All Enclosures shall be provided with printed labels / stickers indicating source
code.
2.1 40/63A 4pole Isolator in Polycarbonate or MS enclosure. Nos.

2.2 16/25/ 32A 4pole Isolator in Polycarbonate or MS enclosure. Nos.

2.3 16/25A / 32 2pole Isolator in Polycarbonate or MS enclosure. Nos.

2.4 80A 4pole Isolator in weatherproof (IP65) Polycarbonate or MS enclosure. Nos.

Page 1 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

2.5 40/63A 4pole Isolator in weatherproof (IP65) Polycarbonate or MS enclosure. Nos.

2.6 16/25/ 32A 4pole Isolator in weatherproof (IP65) Polycarbonate or MS enclosure. Nos.

2.7 16/25A/32 2pole Isolator in weatherproof (IP65) Polycarbonate or MS enclosure. Nos.

SUB TOTAL

3 LT CABLES

Supply, Laying, Testing and Commissioning of stranded XLPE/PVC insulated,

Armoured/Unarmoured/Flexible, Aluminium / Copper conductor, laid in tray /
hume pipe / in ready made trenches, with nylon cable ties / MS Clamps @ 600mm
interval etc., as required.
Insulation: XLPE above 25Sqmm and Class A PVC below 25Sqmm
Inner sheath: Extruded PVC only for Multicore
Outer sheath: Extruded Type ST2 PVC FRLS
Voltage grade:1100Volts
Armoure: Galvanized Steel strip/Wire for multicore
Non Magnetic Aluminium Wire/Strip for Single core

3A XLPE Insulated & Steel Armoured Aluminium Conductor Cables

3.1 3.5 Core X 240 Sqmm Mts

3.2 3.5 Core X 185 Sqmm Mts

3.3 3.5 Core X 150 Sqmm Mts

3.4 3.5 Core X 95 Sqmm Mts

3.5 3.5 Core X 70 Sqmm Mts

3.6 3.5 Core X 50 Sqmm Mts

3.7 4 Core X 35 Sqmm Mts

3.8 4 Core X 25 Sqmm Mts

3.9 4 Core X 16 Sqmm Mts

3.10 4 Core X 10 Sqmm Mts

3.11 4 Core X 6 Sqmm Mts

3B PVC Insulated & Un Armoured Copper Conductor cables (YY Type)

3.1 1 Core x 70 Sq. mm Mts

3.2 1 Core x 50 Sq. mm Mts

3.3 1 Core x 35 Sq. mm Mts

3.4 1 Core x 25 Sq. mm Mts

3.5 1 Core x 16 Sq. mm Mts

3.6 1 Core x 10 Sq. mm Mts

3.7 1 Core x 6 Sq. mm Mts

3C PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type)
3.1 4 Core x 35 Sq. mm Mts
Page 2 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

3.2 4 Core x 25 Sq. mm Mts

3.3 4 Core x 16 Sq. mm Mts

3.4 4 Core x 10 Sq. mm Mts

3.5 4 Core x 6 Sq. mm Mts

3.6 4 Core x 4 Sq. mm Mts

3.7 3 Core x 6 Sq. mm Mts

3.8 3 Core x 4 Sq. mm Mts

3.9 3 Core x 2.5 Sq. mm Mts

SUB TOTAL

4 LT CABLES ENDTERMINATIONS

Supply, Installation, Testing and Commissioning of Compression type cable gland,

aluminium lugs for aluminium cables / copper lugs for copper cables, insulation
tape, anti corrosive paste, brass clamps for gland earthing with 14 SWG copper wire
to connect to nearest earth flat.
Gland type : Brass with nickel plated
Compression : Double compression above 35 [Link]
Sealing Ring : Natural rubber for indoor, Neoprene for Outdoor
Bimetallic lugs to be used

4A XLPE Insulated & Steel Armoured Aluminium Conductor Cables

4.1 3.5 Core X 240 Sqmm Nos.

4.2 3.5 Core X 185 Sqmm Nos.

4.3 3.5 Core X 150 Sqmm Nos.

4.4 3.5 Core X 95 Sqmm Nos.

4.5 3.5 Core X 70 Sqmm Nos.

4.6 3.5 Core X 50 Sqmm Nos.

4.7 4 Core X 35 Sqmm Nos.

4.8 4 Core X 25 Sqmm Nos.

4.9 4 Core X 16 Sqmm Nos.

4.10 4 Core X 10 Sqmm Nos.

4.11 4 Core X 6 Sqmm Nos.

4B PVC Insulated & Un Armoured Copper Conductor cables (YY Type)

4.1 1 Core x 70 Sq. mm Nos.

4.2 1 Core x 50 Sq. mm Nos.

4.3 1 Core x 35 Sq. mm Nos.

4.4 1 Core x 25 Sq. mm Nos.

4.5 1 Core x 16 Sq. mm Nos.

Page 3 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

4.6 1 Core x 10 Sq. mm Nos.

4.7 1 Core x 6 Sq. mm Nos.

4C PVC Insulated & Steel Armoured Copper Conductor cables (YFY Type)
4.1 4 Core x 35 Sq. mm Nos.

4.2 4 Core x 25 Sq. mm Nos.

4.3 4 Core x 16 Sq. mm Nos.

4.4 4 Core x 10 Sq. mm Nos.

4.5 4 Core x 6 Sq. mm Nos.

4.6 4 Core x 4 Sq. mm Nos.

4.7 3 Core x 6 Sq. mm Nos.

4.8 3 Core x 4 Sq. mm Nos.

4.9 3 Core x 2.5 Sq. mm Nos.

SUB TOTAL

5 CABLE TRAYS
5.1 LADDER TYPE TRAYS
2mm Thick Slotted angle GI ready made cable trays with factory fabricated bends,
(horizontal and vertical bends, reducers, tees, cross members) hitec rod and
channel supports upto 300mm wide trays and Fabricated MS angle iron duly
painted for 450mm & above size cable trays to suit site conditions. The tray should
comply with the specification of IS Standards.(Quoted rate shall include vertical
MS supports as required)

a) 600 mm wide x 75 mm depth cable tray Mtrs.

b) 450 mm wide x 75 mm depth cable tray Mtrs.
c) 300 mm wide x 50 mm depth cable tray Mtrs.
d) 150 mm wide x 50 mm depth cable tray Mtrs.

Perforated GI type trays with 1.6mm thick body & cover. (Colour code as per
5.2
architect)

a) 600 mm wide x 75 mm depth perforated tray Mtrs.

b) 450 mm wide x 75 mm depth perforated tray Mtrs.
c) 300 mm wide x 50 mm depth perforated tray Mtrs.
d) 150 mm wide x 50 mm depth perforated tray Mtrs.
e) 100 mm wide x 50 mm depth perforated tray Mtrs.

SUB TOTAL

6 PRE-GALVANIZED WIREWAY TRUNKING FOR IT & POWER CABLING

Supply & Installation of following size GI raceway / wire way with cover, made out
of 16G GI for body and 14/16G GI for cover.
Raceway installed below false floor shall include necessary mounting supports,
junction boxes and accessories to fix it firmly to the ground.
Rate includes necessary floor cutting and chipping with machine of minimum
75mm depth and maximum depth may vary as per site condition, removal of debris
out of site and neatly finished with concrete up to the finished floor level.

Under screed Raceways to be covered with Chicken mesh before concreting.

Curing compound to be applied after initial setting of the concrete.
Page 4 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

All edges, cut faces shall be free of burrs & shall be smooth. Coupling of the race
ways to be done using fisher plates
Ceiling raceways shall be supported by " C" type clamp supports.
Every 100mm raceway dividers to be provided for floor raceways

6.1 Floor Raceway

a) 300 x 40mm Size 16G body & 14G cover Mtrs.
b) 200 x 40mm Size 16G body & 14G cover Mtrs.
c) 100 x 40mm Size 16G body & 14G cover Mtrs.

6.2 Ceiling raceways

a) 300 x 40mm Size 16G body & 16G cover Mtrs.
b) 200 x 40mm Size 16G body & 16G cover Mtrs.
c) 100 x 40mm Size 16G body & 16G cover Mtrs.

6.3 GI - Junction boxes

Junction boxes made of 14G with four side and top openable cover to be provided
with vertical supports. Height of the floor junction box to be 50 to 75mm adjustable
type as to match to the surface of the floor.
a) 405 x 405 x 45mm Size Nos.
b) 305 x 305 x 45mm Size Nos.
c) 205 x 205 x 45mm Size Nos.
d) 105 x 105 x 45mm Size Nos.

6.4 FLOOR CUTTING FOR RACEWAY LAYING

Cutting of floor screeding and applying of one coat of water proof course before
and after laying of raceway with wire mesh and finishing for accommodating the
raceways/conduits and filling with concrete and making it level including adequate
curing. The rate should be including removal debris from site and campus.
a) 25/ 32mm dia Mtrs.
b) 400 x 40mm Size Mtrs.
c) 300 x 40mm Size Mtrs.
d) 200 x 40mm Size Mtrs.
e) 100 x 40mm Size Mtrs.

Supply & Installation of Powder coated raceway with cover, made out CRCA sheet
6.5 of 14G for body and cover. - The color code shall be as per site approval. This item
shall be used in Server / HUB rooms.

a) 450mm Width x 150mm Depth Mtrs.

b) 300mm Width x 150mm Depth Size Mtrs.
c) 150mm Width x 100mm Depth Size Mtrs.

SUB TOTAL

7 MCB DISTRIBUTION BOARDS (MCB DB's)

Supply, Installation, Testing and Commissioning of IP43 MCB Distribution board

factory assembled totally enclosed wall mounted, Double door top and bottom
cable entry, MCB distribution boards as per standard and with electrolytic grade
copper busbars for phases and neutral and with suitable earth links for earthing
and laminated A3 OR A4 size SLD copy shall be pasted inside DB door. Supply of
DB's as per approved shop dwgs.

12 Way, TPN, Flexi MCB DB with provision for suitable incomer & insulated fork
7.1
type bus, 3nos. Neutral terminal bars & a common earth terminal bar.
[LDB-1-2, UDB1-4, RP DB-1-2] Nos.

8 Way, TPN, Flexi MCB DB with provision for suitable incomer & insulated fork type
7.2
bus, 3nos. Neutral terminal bars & a common earth terminal bar.
[LSS DB] Nos.
Page 5 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

6 Way, TPN, MCB DB with provision for suitable incomer & insulated fork type bus,
7.3
3nos. Neutral terminal bars & a common earth terminal bar.
[ SUDB] Nos.

12 Way, VTPN, MCB DB with provision for suitable incomer & insulated fork type
7.4
bus, 3nos. Neutral terminal bars & a common earth terminal bar.

Nos.

8 Way, VTPN, MCB DB with provision for suitable incomer & insulated fork type
7.5
bus, 3nos. Neutral terminal bars & a common earth terminal bar.

[ACDB ] Nos.

4 Way, VTPN, MCB DB with provision for suitable incomer & insulated fork type
7.6
bus, 3nos. Neutral terminal bars & a common earth terminal bar.
Nos.

8 Way, SPN, MCB DB with provision for suitable incomer & insulated fork type bus,
7.7
Neutral terminal bars & a common earth terminal bar.
[ELDB] Nos.

SUB TOTAL

8 MCB's, RCCB's, RCBO's &

Supply & installation of 240 / 415V, 10kA breaking capacity current limiting type
MCBs with `C' curve characteristics for Raw power distribution and 'D' curve
characteristics for all UPS power distribution. The circuit breaker shall be din rail
mounting type.

8.1 63/ 40A, 4P MCB ( UDB, RPDB,LDB,ACDB I/c) Nos.

8.2 32A, 4P MCB ( LSSDB, HUB I/c) Nos.

8.3 40A, 2P 300mA RCCB Si/HPi type with 2KA SPD (UDB DB ph I/c) Nos.

8.4 40A, 2P 30mA RCCB type (LDB DB ph I/c) Nos.

8.5 40A, 2P 100mA RCCB type (RPDB DB ph I/c) Nos.

8.6 32A, 2P 100mA RCCB type (LSS DB ph I/c) Nos.

8.7 32A, 2P MCBs 'D' Curve with 2KA SPD (SUDB DB ph I/c) Nos.

8.8 25A, 2P 30mA RCBO type (ELDB DB I/c) Nos.

8.9 10/ 16A SP 'D'curve MCBs ( UDB,LSS DB o/g) Nos.

8.10 10A SP MCBs 'C' Curve ( LDB, ELDB o/g) Nos.

8.11 16A SP MCBs 'C' Curve ( RPDB, HVAC o/g) Nos.

8.12 63/40A TP MCBs 'C' Curve Nos.

8.13 16/32A TP MCBs 'C' Curve Nos.

8.14 63/40A TP MCBs 'D' Curve Nos.

8.15 16/32A TP MCBs 'D' Curve Nos.

Page 6 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

8.16 16/32A DP MCB 'D'curve (SUDB o/g) Nos.

8.17 40/63A DP MCBs 'D' Curve Nos.

8.18 63A Din rail mounted smart meter. Similar to Schnedier iEM3150 Nos.

SUB TOTAL

9 POWER RECEPTACLES

Supply, Installation, Testing and Commissioning of the following Modular/Industrial

Switch, sockets with modular front plate safety shutters and required accessories
as per the site conditions. UPS power plate - White & Raw power plate - Black
unless otherwise mentioned.
Industrial type sockets shall be of Polycarbonate body with plug top.
All switch / sockets shall be provided with printed labels / stickers indicating source
code.
9A MODULAR SOCKETS

9.1 3nos. 6A Round Pin socket outlets controlled by 1no. 16A SP switch w/o back box. Nos.

9.2 2nos. 6A Round Pin socket outlets controlled by 1no. 6A SP switch w/o back box. Nos.

9.3 2nos. 16A Round Pin socket outlets controlled by 1no. 16A SP switch w/o back box. Nos.

1 No., 6/16A round 6 pin socket outlet on UPS Power controlled by 1no. 16A SP
9.4 Nos.
switch with indicator & w/o back box.

1 No., 6/16A round 6 pin socket outlet on Raw Power controlled by 1no. 16A SP
9.5 Nos.
switch with indicator & box

1 No., 6A round pin socket outlet controlled by 1no. 6A SP switch with box. (HVAC,
9.6 Nos.
EXIT SIGNAGES, AC UNITS CCTV & Wifi units).

9.7 1 No., 6A round pin socket outlet controlled by 1no. 6A SP switch without box. Nos.

10/ 8module MS/GI back box for electrical outlets as per site requirement including
9.8 Nos.
necessary civil works

6module MS/GI back box for electrical outlets as per site requirement including
9.9 Nos.
necessary civil works

3module MS/GI back box for electrical outlets as per site requirement including
9.10 Nos.
necessary civil works

2module MS/GI back box for LAN outlets as per site requirement including
9.11 Nos.
necessary civil works

Readymade Stainless steel finish floor mounted Junction box with 4nos of 6/13A
universal socket controlled by 2 Nos of 16A switch an provision for 4 IO ports. Box
9.12 Nos.
to be of height adjustable type with height of the box less than 70mm. Top of the
floor box to be flushed with the floor level.

9B INDUSTRIAL SOCKETS
16A 3 pin 1phase Industrial type socket with plug top controlled by 16A DP MCB in
9.1 Nos.
polycarbonate/ MS enclosure.

32A 3 pin 1phase Industrial type socket with plug top controlled by 32A DP MCB in
9.2 Nos.
polycarbonate/ MS enclosure.

Page 7 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

16A 5 pin 3phase Industrial type socket with plug top controlled by 16A 4P MCB in
9.3 Nos.
polycarbonate/ MS enclosure.

32A 5 pin 3phase Industrial type socket with plug top controlled by 32A 4P MCB in
9.4 Nos.
polycarbonate/ MS enclosure.

SUB TOTAL

10 CIRCUIT WIRING

Circuit mains using 660V grade PVC insulated copper conductor ZHLS wires. All
circuit terminations shall be provided with solder less crimping type copper sockets
/ lugs, ferrules indicating source code on load side & load code on source side.
There shall not be any joints in the circuits, only looping is allowed in terminal
blocks & at points.
NOTE:
Wire ends to be Soldered at all termination in MCB DBs/ socket points.
Ferrules at both the ends
Insulation sleeves over the lugs as required
No different phases shall be drawn in same conduit

10.1 2 Runs of 2.5 [Link] + 1Run of 1.5 [Link] wires Mts.

10.2 3 Core - 1.5 [Link] flexible copper conductor cables Mts.

10.3 3 Core - 2.5 [Link] flexible copper conductor cables. Mts.

10.4 3 Core - 4.0 [Link] flexible copper conductor cables. Mts.

10.5 3 Core - 6.0 [Link] flexible copper conductor cables. Mts.

10.6 3 Core - 10.0 [Link] flexible copper conductor cables. Mts.

10.7 4Core - 2.5 [Link] flexible copper conductor cables. Mts.

10.8 4Core - 4.0 [Link] flexible copper conductor cables. Mts.

10.9 4Core - 6.0 [Link] flexible copper conductor cables. Mts.

10.10 4Core - 10.0 [Link] flexible copper conductor cables. Mts.

SUB TOTAL

11 CONDUITS

2mm thick Rigid FRLS Grade PVC conduits with junction boxes, GI saddle clamps,
collar, bends & its accessories. GI spacer clamps shall be provided at every 600mm
interval and both ends of JB and at the end of pipe. For cross over heat pump pipe
bending machines should be used for offset preparation. (For concealed
conduiting application in concrete or partition or walls )

11.1 20mm dia conduit Mtrs.

11.2 25mm dia conduit Mtrs.

11.3 32mm dia conduit Mtrs.

11.4 25mm dia steel reinforced PVC flexible conduit Mtrs.

11.5 75mm dia Steel flexible conduit with necessary accessories. Mtrs.

11.6 75mm dia PVC rigid pipe with collars Mtrs.

Page 8 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

16SWG White/Grey color enamelled GI conduits with cast iron junction boxes,
B threaded type accessories, GI clamps, Etc., For group of conduits GI channel,
hitec rod supports shall be included.

11.1 20mm dia conduit Mtrs.

11.2 25mm dia conduit Mtrs.

11.3 32mm dia conduit Mtrs.

11.4 50mm dia conduit Mtrs.

11.5 75mm dia conduit Mtrs.

16SWG White/Grey color enamelled MS conduits with cast iron junction boxes,
C threaded type accessories, GI clamps, Etc., For group of conduits GI channel,
hitec rod supports shall be included.

11.6 20mm dia conduit Mtrs.

11.7 25mm dia conduit Mtrs.

11.8 32mm dia conduit Mtrs.

SUB TOTAL

12 LUMINARIES

Luminaries Only Installation, testing and commissioning including storing and

receipt from supplier of following high efficiency LED luminaires with all
accessories as required for exposed ceiling, false ceiling and high levels and very
large size fixtures as listed below. All suspension kits will be supplied by Light
supplier however contractor to coordinate for right and appropriate suspension
arrangement.
A INDOOR LIGHT FIXTURES
28W LED Recessed mounted 2'x2' Panel light with CRCA powder coated white
after phosphochromate treatment & High transmittance PMMA opal diffuser for
12.1 glare free symmetric light distribution and with integral electronic low THD (<10%) Nos
LED driver and lumen efficacy shall not be less the 110Lumens/Watt.

12W LED Recess mounted down lighter with pressure die-cast aluminium heat sink
12.2 & PC diffuser in white powder coated finish with integral electronic low THD (<10%) Nos
LED driver and lumen efficacy shall not be less the 100Lumens/Watt.

6-9W Tiltable LED Recess mounted spot lighter with pressure die-cast aluminium
12.3 heat sink & PC diffuser in white powder coated finish with integral electronic low Nos
THD (<10%) LED driver and lumen efficacy shall not be less the 80Lumens/Watt.

12W LED Recess mounted square down lighter with pressure die-cast aluminium
12.4 heat sink & PC diffuser in white powder coated finish with integral electronic low Nos
THD (<10%) LED driver and lumen efficacy shall not be less the 110Lumens/Watt.

10W/ Meter Linear recessed LED fixture with aluminum extruded housing with trim
12.5 powder coated finis High transmittance PMMA opal diffuser for glare free Nos
symmetric light distribution and with electronic low THD (<10%) LED driver.

Page 9 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

Solid state high brightness SMD LED chips strip light-14.5W per Mtr with fixing
12.6 Nos
clipds and 3M tape. (To be quoted in Meters).

12.7 Electronic LED drivers for light fixtures for 6 to 40W. Nos

SUB TOTAL

13 POINT WIRING

Supply, installation, Testing and Commissioning of Point Wiring of light/fan

points complete with all wiring materials such as 660V PVC FRLS grade multi
strand flexible copper wire of minimum size of 3Rx1.5 [Link], suitable size GI
A
conduits. Steel reinforced flexible conduits with gland/couplers shall be used for
drops. The rate shall also include cost of providing light fixture point ferrules &
number stickers.
13.1 PRIMARY LIGHT POINT WITH 6A SWITCH
Primary light point- Wiring from switch control to the primary light point. The
Nos
switch and all necessary accessories would be part of primary point.

13.2 SECONDARY LIGHT POINT's

Secondary light point- Extension of wiring from primary to secondary light points. Nos

SUB TOTAL

14 EARTHING

Supply, providing and testing of 3.5M long 77MM DIA SPECIAL maintenance free
14.1 copper electrode with 50kgs of special compound including boring, civil works and Nos.
chamber cover, labelling, etc. Similar (Galaxy / Ashlok earthing)

Providing 100mm dia GI Pipe Earth Electrode as per IS 3043 complete. with salt,
14.2 charcoal, brick masonary chamber with light duty CI cover size: 450 x450 x 450 mm Nos.
complete. Body Earthing

14.3 EARTH STRIPS

GI/Cu earth strips on cable tray or below ground as per site condition. All Cu. Strips
shall be run in pvc heat shrinkable sleeve & mounted on insulation mounts. Cost of
civil works shall be included for strips laid below ground.
GI CONDUCTOR
a) 8 SWG GI Wire Mtrs.

b) 25 x 3mm GI Earth flat Mtrs.

c) 25 x 6mm GI Earth flat Mtrs.

d) 40 x 6mm GI Earth flat Mtrs.

e) 25 x 6mm GI Earth flat on insulated mounts Mtrs.

Busbar of 0.5 Mtr length made out of 25 x 6 mm GI strip with drill holes of M8 at
f) Nos.
25mm interval mounted on insulators with Enclosure.

Busbar of 0.5 Mtr length made out of 40 x 6 mm GI strip with drill holes of M8 at
g) Nos.
25mm interval mounted on insulators with Enclosure.

Busbar of 0.5 Mtr length made out of 75 x 10 mm GI strip with drill holes of M8 at
h) Nos.
25mm interval mounted on insulators with Enclosure.

14.4 COPPER CONDUCTOR

a) 8 SWG Cu Wire Mtrs.
Page 10 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

b) 25 x 3mm Cu. Earth flat Mtrs.

c) 25 x 6mm Cu. Earth flat Mtrs.

d) 25 x 3mm Cu. Earth flat on insulated mounts Mtrs.

Busbar of 0.5 Mtr length made out of 25 x 3 mm Cu. strip with drill holes of M8 at Nos.
e)
25mm interval mounted on insulators with Enclosure.

Busbar of 0.5 Mtr length made out of 25 x 6 mm Cu. strip with drill holes of M8 at Nos.
f)
25mm interval mounted on insulators with Enclosure.

Busbar of 0.75 Mtr length made out of 40 x 6 mm Cu. strip with drill holes of M8 at Nos.
g)
25mm interval mounted on insulators with Enclosure.

14.5
PVC Insulated FRLS Copper Conductor Unarmoured Cables (YY Type) Green Color
1.1kV grade, copper conductor, PVC insulated, unarmoured, power cables. The
cables shall be laid on tray / hume pipe /in ready made trenches, with nylon cable
ties / MS Clamps etc., as required. Rate quoted shall exclude cost of tray / hume
pipe

a) 1 Core x 70Sq. mm Mtrs.

End terminations Nos.

b) 1 Core x 50Sq. mm Mtrs.

End terminations Nos.

c) 1 Core x 35Sq. mm Mtrs.

End terminations Nos.

d) 1 Core x 25Sq. mm Mtrs.

End terminations Nos.

e) 1 Core x 16Sq. mm Mtrs.

End terminations Nos.

f) 1 Core x 10 Sq. mm Mtrs.

End terminations Nos.

g) 1 Core x 6Sq. mm including Terminations Mtrs.

h) 1 Core x 4Sq. mm including Terminations Mtrs.

i) 1 Core x 2.5Sq. mm including Terminations Mtrs.

SUB TOTAL

15.0 MISCELLANEOUS ITEMS

All the items shall be of IS certified

Class-A confirming to IS:15652 approved tested quality rubber mat 100V grade ISI
15.1 approved of 2 mm thick and 1meter wide & 2 meter length installed in front of the Nos.
power distribution boards (Make: Electromat or equivalent )

Shock treatment chart as approved by the Electrical Inspectorate mounted on teak

15.2 Nos.
wood frame and suitable for wall mounting in 3 languages (Tamil, English & Hindi)

15.3 First aid kit Nos.

15.4 415V 150mm x 150mm enamel type danger board Nos.

Page 11 of 12
 ELECTRICAL BOQ FOR PUNE.

SI. NO ITEM DESCRIPTION UNITS

15.5 1.1KV grade Rubber gloves as per IS. Nos.

15.6 A0 size SLD drawing display board with lamination Nos.

2 hour fire rated fire retardant material sealing all electrical trays, conduits and
openings made in the slab / wall / partition to take conduits / cable trays / raceways
15.7 Nos.
etc as required complete / as directed by the site incharge. Similar to Hilti CP620
Fire Stop Foam

MS Powder coated CRCA sheet steel fabricated item as per site condition for wires
15.8 manager around the MCB DBs. The depth of the wireway and color shall match to Kgs
that of MCB DB.

Professional charges towards filing application, preparation of drawings in

necessary formats for approval, follow up and arranging approval of drawings,
15.8 LS
scheme by Local electricity authority / Electrical Inspectorate, obtaining clearance
from electricity authority / Electrical Inspectorate.

4 KVA 1phase Input & 1 phase output, Online conversion INVERTER with 90min
15.9 Nos.
SMF VRLA battery on MS stand for Emergency lighting.

SUB TOTAL

16 TEMPORARY CONSTRUCTION POWER PANLES & RECEPTACLES

Temporary Construction Lighting & Power Receptacle arrangements including

Maintenance Through out project period shall be quoted in this item. The office is
area is approx. 18500 sft and construction power shall be provided by the
developer.
16.1 Lot.
Note:
Fixture to be installed to maintain the 100-150Lux at site.
All the construction panels and distribution boards shall have leakge protection as
per the local regulations/ IS standards.

SUB TOTAL

Page 12 of 12