1000/13.

02

KOBSERT
Thread inserts for metals

Contents KOBSERT Thread inserts for metals

The principle The benefits Product types Applications in the Automotive and General industry Technical information Guidelines for KOBSERT Manual setting tools Mechanical setting tools Page 3 3 3 4 5 10 12 14

KOBSERT Thread inserts for metals The principle

When installing the threaded inserts, the safety flange is pressed into the surface of the parent material. (This reduces the pipe-shaped neck area under the safety flange and covers as far as the mounting thread). After installation into the part, the threaded inserts are reliably protected against unscrewing, even when the part is exposed to dynamic screwload or extreme temperatures. Due to the installation process where the KOBSERT body is pulled into the same direction like the screwload, the clearance of the external thread is compensated. The external thread is pre-setted proberly. If, in exceptional cases, it is necessary to remove the threaded insert, follow the instructions on page 10.

KOBSERT Thread insert

Safty Flange KOBSERT Threaded Sockets Sealing Ring Compression Zone

Component

External Thread d 2 Internal Thread d 1

The benefits
KOBSERT threat inserts achieve a heavy-duty connection capability in low-strength metal materials for instance in aluminium and magnesium alloys. Creation of high-strength, wear-resistant, vibration-resistant and torsion-proof nut threads. Tight fit: The KOBSERT is mechanically anchored without additional securing pins or washers and without chemical adhesion or sealing materials. Thread repair: KOBSERT thread inserts also serve to repair damaged threads. Sealing function: The KOBSERT thread insert with sealing ring is designed for gas- and liquid-tight joints.

Design
Metric ISO thread DIN 13, tolerance range for industry standard screws and nuts tolerance 6g/6H. Surface DIN 267 Part 2 Product Class A. Material Steel, galvanic Zink plated, colourless chromated (for Order no. see page 5 9). Stainless steel, coatless (5th digit of the order no. changes from 0 to 6). Sealing Ring PERBUNAN (eWZ Bayer AG) 70 Shore A, heat resistant to ~140C. [VITON, eWZ E.I. Dupont de Nemours & Co. INC.], to 300C (put 1 as the 5th digit of the order no.). Other specifications available on request.

KOBSERT Applications Automotive

Engine attachments Gear box connection Towing lugs

General industry
Refrigeration and air conditioning technology Electrical engineering / electronics, e.g. switchboards, connecters Agricultural technology Garden technology

KOBSERT Threaded inserts Type 1030

Safety flange Open version / through hole
d3

Countersinking cylindrical portion is only necessary for aluminium alloys with high tensile strength (ca. 250 N/mm2, see page 6).
DR

L1(L2)

d1 d2

L3

d2

Material: Steel, galvanic zink plated, colourless chromated

Installation tools see pages 12 15 Knurl DIN 82 1.2 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6

d1 M 4*** M 5 M 6 M 6 M 8 M 10 M 12 x 1.5 M 12 M 14 x 1.5 M 14 M 16 x 1.5 M 16

Order no. 1030 0040 008 1030 0050 010 1030 006 0010 1030 006 0012 1030 008 0015 1030 010 0018 1030 012 4021 1030 012 0021 1030 014 4024 1030 014 0024 1030 016 4026 1030 016 0026

d2 M7 M8 M 10 M 10 M 12 x 1.5** M 14 x 1.5 M 16 x 1.5 M 16 x 1.5 M 20 x 1.5 M 20 x 1.5 M 22 x 1.5 M 22 x 1.5

d3 4.35 5.35 6.8 6.8 8.5 10.5 12.5 12.5 15.5 15.5 17.5 17.5

L 1* 8 10 10 12 15 18 21 21 24 24 26 26

L 2* 8.6 10.8 11 13 16 19 22 22 25 25 27 27

L 3* 3.3 3.5 2.7 2.7 3.3 3.3 3.5 3.5 3.6 3.6 3.6 3.6

DR 7.6 8.8 11 11 13 15 17 17 21 21 23 23

Material: Stainless steel A1

Installation tools see pages 12 15 Knurl DIN 82 1.2 1.2 1.2 1.6 1.6 1.6 1.6 1.6 1.6

d1 M 4 M 5 M 6 M8 M 10 M 12 M 12 x 1.5 M 14 M 16

Order no. 1030 6040 008 1030 6050 010 1030 6060 012 1030 6080 015 1030 6100 018 1030 6120 021 1030 6124 021 1030 6140 024 1030 6160 026

d2 M7 M8 M 10 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 16 x 1.5 M 20 x 1.5 M 22 x 1.5

d3 4.35 5.35 6.8 8.5 10.7 12.5 12.5 15.5 17.5

L 1* 8 10 12 15 18 21 21 24 26

L 2* 8.6 10.8 12.8 16 19 22 22 25 27

L 3* 3.3 3.5 3.5 4.5 4.6 4.5 4.5 4.8 4.8

DR 7.6 8.8 10.8 12.9 15 17 17 21 23

* L 1, L 3 = Length when assembled. * L 2 = Length in delivery conditions. Other lengths available on request. ** also available with pitch 1.25 *** on request Different materials on request. Further technical details on page 3. Subject to technical alterations.

KOBSERT Threaded inserts Type 1031

Safety flange Open version / through hole With sealing ring: PERBUNAN
d3 d4 d5 L1(L2) L3 d1 d2 120 d6 t DR d2 d1*

Sealing ring: PERBUNAN as standard, 70 Sh A Heat resistance ~ + 140 C Colour coding: black

Alternative: VITON 75 Sh A Heat resistance: max. + 300 C Colour coding: green Installation tools see pages 12 15 Knurl DIN 82 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Sealing ring d4 x d5 10 x 1.5 12 x 1.5 14 x 2.0 16 x 2.0 18 x 2.0 20 x 2.0 22 x 2.0 24 x 2.0 26 x 2.0 Countersink Tol. t 0.10 0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 2.5 2.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0

Material: Steel, galvanic zink plated, colourless chromated

d1 M 10 x 1

Order no. 1031 010 3010 1031 012 4012 1031 014 4012 1031 016 4012 1031 018 4012 1031 020 4014 1031 022 4014 1031 024 4014 1031 026 4016

d2 M 14 x 1.5 M 16 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 26 x 1.5 M 28 x 1.5 M 30 x 1.5 M 32 x 1.5

d3 10.5 12.5 15.5 17.5 19.5 21.5 23.5 25.5 27.5

L 1* 10 12 12 12 12 14 14 14 16

L 2* 11 13 13 13 13 15 15 15 17

L 3* 3.2 3.5 3.6 3.6 3.6 3.6 3.6 3.6 3.6

DR 15 17 21 23 25 27 29 31 33

d6 14 16 20 22 24 26 28 30 32

+ Tol. 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 26 x 1.5

* L 1, L 3 = Length when assembled. * L 2 = Length in delivery conditions. Other lengths available on request. Type 1031 is preferable for short screw lengths DIN 908 and 910. Different materials on request. Further technical details on page 3. Subject to technical alterations.

KOBSERT Threaded inserts Type 1032

Safety flange with sealing flange Open version / through hole With sealing ring: PERBUNAN
D d3 d4 d5 L1(L2) L3 d1 d2 120 d6 d1 d2

Sealing ring: PERBUNAN as standard, 70 Sh A Heat resistance ~ + 140 C Colour coding: black

Alternative: VITON 75 Sh A Heat resistance: max. + 300 C Colour coding: green Installation tools see pages 12 15 Knurl DIN 82 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 Sealing ring d4 x d5 10 x 1.5 12 x 1.5 14 x 2.0 16 x 2.0 18 x 2.0 20 x 2.0 22 x 2.0 24 x 2.0 26 x 2.0 30 x 2.0 Countersink Tol. t 0.10 0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 +0.15/0.10 2.5 2.5 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0

Material: Steel, galvanic zink plated, colourless chromated

d1 M 10 x 1 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 18 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 1.5 M 26 x 1.5 M 30 x 1.5

Order no.

d2

d3 10.5 12.5 15.5 17.5 19.5 21.5 23.5 25.5 27.5 31.5

D 16 18 22 24 26 28 30 32 34 38

L 1* 11.0 14.5 14.5 14.5 14.5 15.5 15.5 15.5 17.5 17.5

L 2* 12.0 15.5 15.5 15.5 15.5 16.5 16.5 16.5 18.5 18.5

L 3* 4.0 4.4 4.5 4.5 4.7 4.7 4.7 4.7 4.7 4.7

L5 0.8 0.8 1.0 1.0 1.2 1.2 1.2 1.2 1.2 1.2

DR 15 17 21 23 25 27 29 31 33 37

d6 14 16 20 22 24 26 28 30 32 36

+ Tol. 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3 0.3

1032 010 3011 M 14 x 1.5 1032 012 4145 M 16 x 1.5 1032 014 4145 M 20 x 1.5 1032 016 4145 M 22 x 1.5 1032 018 4145 M 24 x 1.5 1032 020 4155 M 26 x 1.5 1032 022 4155 M 28 x 1.5 1032 024 4155 M 30 x 1.5 1032 026 4175 M 32 x 1.5 1032 030 4175 M 36 x 1.5

Material: Stainless steel A1 Knurl DIN 82 1.6 1.6

Installation tools see pages 12 15 Sealing ring d4 x d5 12 x 1.5 14 x 2.0 Countersink Tol. t 0.10 +0.15/0.10 2.5 3

d1 M 12 x 1.5 M 14 x 1.5

Order no.

d2

d3 12.5 15.5

D 18 22

L 1* 14.5 14.5

L 2* 15.5 15.5

L 3* 4.8 5.5

L5 0.8 0.8

DR 18 22

d6 16 20

+ Tol. 0.3 0.3

1032 6124 145 M 16 x 1.5 1032 6144 145 M 20 x 1.5

* L 1, L 3 = Length when assembled. * L 2 = Length in delivery conditions. Other lengths available on request. Different materials on request. Further technical details on page 3. Subject to technical alterations.

KOBSERT Threaded inserts Type 1033

Safety flange Closed version / blind hole With sealing ring: PERBUNAN

d3

d4 d5 L3

L1(L2)

L4

d1

d1

Sealing ring: PERBUNAN as standard, 70 Sh A Heat resistance ~ + 140 C Colour coding: black Alternative: VITON 75 Sh A Heat resistance: max. + 300 C Colour coding: green

d2 120 d6

DR

d2

Material: Steel, galvanic zink plated, colourless chromated

d1* M 5 M 6 M 8 M 10 M 12 M 14 M 16

Order no. 1033 005 0012 1033 006 0015 1033 008 0018 1033 010 0021 1033 012 0024 1033 014 0026 1033 016 0031

d2 M 8 M 10 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 20 x 1.5 M 22 x 1.5

d3 5.4 6.8 8.5 10.5 12.5 15.5 17.5

L1** 12 15 18 21 24 26 31

L2** 13 16 19 22 25 27 32

L3** 2.7 2.7 3.3 3.3 3.5 3.6 3.6

L4** 8.0 10.5 12.0 13.9 15.9 16.9 20.9

DR 9 11 13 15 17 21 23

Knurl Sealing ring DIN 82 d4 x d5 1.2 1.2 1.6 1.6 1.6 1.6 1.6 5 x 1.0 6 x 1.5 8 x 1.5 10 x 1.5 12 x 1.5 14 x 2.0 16 x 2.0

Installation tools see pages 12 15 Countersink Tol. t 0.10 0.10 0.10 0.10 0.10 +0.15/0.10 +0.15/0.10 2.0 2.5 2.5 2.5 2.5 3.0 3.0

d6 8 10 12 14 16 20 22

+ Tol. 0.3 0.3 0.3 0.3 0.3 0.3 0.3

Material: Stainless steel A1

Installation tools see pages 12 15 Knurl Sealing ring DIN 82 d4 x d5 1.2 1.2 1.2 1.6 1.6 4 x 1.0 5 x 1.0 6 x 1.5 8 x 1.5 10 x 1.5 Countersink Tol. t 0.10 0.10 0.10 0.10 0.10 1.8 2 2.5 2.5 2.5

d1* M 4 M 5 M 6 M8 M 10

Order no. 1033 6040 012 1033 6050 012 1033 6060 015 1033 6080 018 1033 6100 021

d2 M 7 M8 M 10 M 12 x 1.5 M 14 x 1.5

d3 4.35 5.35 6.8 8.5 10.7

L1** 12 12 15 18 21

L2** 13 13 16 19 22

L3** 3.3 3.5 3.5 4.5 4.6

L4** 8.2 8 10.5 12 13.9

DR 7.6 8.8 10.8 12.9 15

d6 7 8 10 12 14

+ Tol. 0.3 0.3 0.3 0.3 0.3

* Available with fine thread. ** L 1, L 3, L 4 = Length when assembled. ** L 2 = Length in delivery conditions. Other lengths available on request. Different materials on request. Further technical details on page 3. Subject to technical alterations.

KOBSERT Threaded inserts Type 1040

HP High Power Safety flange Open version / through hole With or without sealing ring: PERBUNAN
L1(L2)

Typ 1041 with sealing ring*

d3

d4 d5 L3 d1

d1 d2

Sealing ring: PERBUNAN as standard, 70 Sh A Heat resistance ~ + 140 C Colour coding: black Alternative: VITON 75 Sh A Heat resistance: max. + 300 C Colour coding: green
DR

90 d6

d2

Material: Steel, galvanic zink plated, colourless chromated Knurl DIN 82 1.2 1.2 1.6 1.6 1.6 1.6 1.6 Sealing ring d4 x d5 7 x 1.5 8 x 2.0 10 x 2.0 12 x 2.0 15 x 2.5 17 x 2.5 19 x 2.5

Installation tools see pages 12 15 Countersink Tol. t 0.1 0.1 0.1 0.1 + 0.15/ 0.10 + 0.15/ 0.10 + 0.18/ 0.10 2.5 3.0 3.5 4.0 4.5 4.5 4.5

d 1* M 5 M 6 M 8 M 10 M 12 M 14 M 16

Order no. 1040 005 0010 1040 006 0012 1040 008 0015 1040 010 0018 1040 012 0021 1040 014 0024 1040 016 0026

d2 M 10 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 2.0

d3 5.5 6.5 8.5 10.5 13.0 15.0 17.0

L 1** 10 12 15 18 21 24 26

L 2** 11.0 13.5 16.5 20.0 23.0 26.0 28.0

L 3** 1.5 1.6 1.8 2.0 2.5 2.5 3.0

DR 11 13 15 17 21 23 25

d6 10 12 14 16 20 22 24

+ Tol. 0.3 0.3 0.3 0.3 0.4 0.4 0.4

Material: Stainless steel A1 Knurl DIN 82 1.2 1.6 1.6 1.6 1.6 1.6 1.6 Sealing ring d4 x d5 8x2 10 x 2 12 x 2 15 x 2.5 17 x 2.5 19 x 2.5 19 x 2.5

Installation tools see pages 12 15 Countersink Tol. t 0.1 0.1 0.1 + 0.15/ 0.10 + 0.15/ 0.10 + 0.15/ 0.10 + 0.18/ 0.10 3 3.5 4 4.5 4.5 4.5 4.5

d 1* M 6*** M 8*** M 10 M 12 M 14*** M 16 M 16 x 1

Order no. 1040 6060 012 1040 6080 015 1040 6100 018 1040 6120 021 1040 6140 024 1040 6160 026 1040 6163 026

d2 M 12 x 1.5 M 14 x 1.5 M 16 x 1.5 M 20 x 1.5 M 22 x 1.5 M 24 x 2 M 24 x 2

d3 6.5 8.5 10.5 13 15 17 17

L 1** 12 15 18 21 24 26 26

L 2** 13.5 16.5 20 23 26 28 28

L 3** 4 4.2 4.2 5 5 5.5 5.5

DR 13 15 17 21.2 23 25.2 25.2

d6 12 14 16 20 22 24 24

+ Tol. 0.3 0.3 0.3 0.3 0.3 0.3 0.3

* Other diameters and threads on request. When ordering type 1041 (with sealing ring) the 4th digit of the order no. changes from 0 to 1. ** L 1, L 3 = Length when assembled. ** L 2 = Length in delivery conditions. Other lengths available on request. *** on request Different materials on request. Further technical details on page 3. Subject to technical alterations.

KOBSERT Installation guidelines Mounting thread

Metric ISO threads according to DIN 13, tolerance 6 H. The mounting thread should checked with a thread gauge tolerance 6 H.

Thread hole
The minor diameter of the thread hole has to be drilled according to DIN 13 tolerance 6 H. In general, the tapped hole should not be countersunk. Chamfering is permissible, within the diameter, but should not be greater than the specified diameter of the mounting thread. If the KOBSERT or the KOBSERT HP is used with a sealing ring, a cylindrical partion in accordance with pages 3 to 7 should be created.

Installation
Manual and motor-driven tools are available for installing the KOBSERT. The KOBSERT insert is screwed into the part until the safety flange is in contact to the surface of the part. The installation procedure pressing the safety flange into the part is carried out by a relative axial movement between the spindle, which has been screwed in, and the frontend assembly of the installation tool. After the setting process the spindle has tube turned out of the KOBSERT.

d1

Disassembly
If KOBSERT threaded inserts must be removed from a part, it must be done as follows (see scetch): Drilling into the safety flange until reaching the external thread (Drill = external thread d2). Lever out the safety flange using a scraper or a screwdriver. Insert a tool for unscrewing if necessary a suitable scraper into the internal thread, so it is possible to turn it. Unscrew the socket anticlockwise.

New installation
Screw in a threaded insert of the same specified size, until the safety flange is level with the previous impression if necessary, unscrew it a little and as usual, set it on one level with the surface using an KOBSERT installation tool.

10

L1

KOBSERT Installation guidelines Wall thickness specifications for aluminium materials (casted and forging alloys)
The minimum width S or the wall thickness SR depends on the tenside strength and the E-Modul of the parent material. The following formula only gives guide values for aluminium alloys. For other materials, e. g. copper or brittle materials, the required wall thickness should be established by performing tests. Dimensions of the mounting thread see page 5 to 9.
S SR S 2 SR DR S 2 S

S = 1.4 x DR

SR = 0.2 x DR

S = Minimum width of workpice SR = Minimum wall thickness DR = Outer diameter of safety flange (knurl diameter)

Pull out load in relation to screw class on tensile strength of parent material
M 24 M 22 M 20 M 18 M 16 M 14 M 12 M 10 M8 M6 M5 103 2 3 4 5 6 7 8 9 104 2 3 4 da N
10.9
22 F 1 8

8.8
.9 12

Pull out load for type 1030 and 1033 KOBSERT threaded inserts in standard lengths, in different material qualities, including: F 18, F 22, F 26, F 32. Tear strengths are 30 to 50 % higher. Test strengths type 1040/1041 on request. Test strengths of screws of different strength classes (8.8 10.9 12.9) ~ 90% of screw yield point. Average installation strength for KOBSERT threaded inserts.

28

32

DR

11

Tools for KOBSERT Threaded inserts Manual installation tools S 4 to S 12

Spindle drive Functional principle: Manual screwing-in of thread insert and spindle, drive-in procedure through manual removal with thread spindle drive. Indirect limitation of stroke through manually applied torque. Application: Smaller series. All types of KOBSERT thread inserts can be installed. Technical data: Capacity up to 4 pieces/min, weight 0.5 1.0 kg, max. setting stroke 12 mm, max. setting force approx. 15 kN.

Description Type S 4 S 5 S 6 S 8 S 10 S 12

Specified M 04 M 05 M 06 M 08 M 10 M 12

Order no. 1053 010 4000 1053 010 5000 1053 010 6000 1053 010 8000 1053 011 0000 1053 011 2000

Further dimensions and special tools on request. Subject to technical alterations.

12

Tools for KOBSERT Threaded inserts Manual installation tools HH 830

Hydraulic-manual drive Functional principle: Manual screwing-in of thread insert and spindle, drive-in procedure hydraulic with lifting lever and manual removal. Limited stroke due to stop ring. Change of wear parts by screwing out threaded mandrel and nozzle. Application: Smaller series. All types of KOBSERT thread inserts can be installed. Technical data: Capacity up to 3 pieces/min, weight 2.0 kg, max. setting stroke 5.0 mm, max. setting force 60 kN, from M14, the threaded mandrel is a two-piece design consisting of threaded mandrel and adapter incl. HELICOIL screwlock. Order no. 1050 0500 000

Specified M 8 M 10 M 10 x 1 M 12 M 12 x 1.5 M 14 M 14 x 1.5 M 16 M 16 x 1.5 M 18 M 18 x 1.5 M 20 M 22 M 22 x 1.5 M 24 M 24 x 1.5 M 26 M 26 x 1.5 M 30 M 30 x 1.5

Tension mandrel comprising threaded mandrel and screw Order no. 1050 0508 020 1050 0510 020 1050 0510 420 1050 0512 020 1050 0512 420 1050 0514 020 1050 0514 420 1050 0516 020 1050 0516 420 1050 0518 020 1050 0518 420 1050 0520 020 1050 0522 020 1050 0522 420 1050 0524 020 1050 0524 420 1050 0526 020 1050 0526 420 1050 0530 020 1050 0530 420

Spares Adaptor Order no. 1050 0514 025 1050 0514 425 1050 0516 025 1050 0516 425 1050 0518 025 1050 0518 425 1050 0520 025 1050 0522 025 1050 0522 425 1050 0524 025 1050 0524 425 1050 0526 025 1050 0526 425 1050 0530 025 1050 0530 425

Replacement unit Chuck Order no. 1050 0508 030 1050 0510 030 1050 0510 030 1050 0512 030 1050 0512 030 1050 0514 030 1050 0514 030 1050 0516 030 1050 0516 030 1050 0518 030 1050 0518 030 1050 0520 030 1050 0522 030 1050 0522 030 1050 0524 030 1050 0524 030 1050 0526 030 1050 0526 030 1050 0530 030 1050 0530 030 Order no. 1050 0508 010 1050 0510 010 1050 0510 410 1050 0512 010 1050 0512 410 1050 0514 010 1050 0514 410 1050 0516 010 1050 0516 410 1050 0518 010 1050 0518 410 1050 0520 010 1050 0522 010 1050 0522 410 1050 0524 010 1050 0524 410 1050 0526 010 1050 0526 410 1050 0530 010 1050 0530 410

Special tools on request. Subject to technical alterations.

13

Tools for KOBSERT Threaded inserts

Machanical setting tool P 2005 K
Hydraulic-pneumatic drive Functional principle: Spinning on the thread insert with touch automatic at the spindle. Drive-in hydraulic-pneumatic as well as automatic spin-off. Limited stroke due to adjusting collar. Change of threaded mandrel with bayonet lock. Application: Medium series. All types of KOBSERT thread inserts can be installed. Technical data: Capacity: up to 15 pieces/min, weight: 2.6 kg, maximum setting stroke: 7 mm, setting force: 21 kN at 5.5 -7 bar. Order no. 1061 550 0000

Specified

Complete tool Order no. 1061 5504 000 1061 5505 000 1061 5506 000 1061 5508 000 1061 5510 000 1061 5510 300 1061 5512 000 1061 5512 400

Complete replacement unit Order no. 1061 5304 010 1061 5305 010 1061 5306 010 1061 5308 010 1061 5310 010 1061 5310 310 1061 5312 010 1061 5312 410

Threaded bolt Order no. 2361 1304 020 2361 1305 020 2361 1306 020 2361 1308 020 2361 1310 020 2361 1310 320 2361 1312 020 2361 5312 410

M4 M5 M6 M8 M 10 M 10 x 1 M 12 M 12 x 1.5

Special tools on request. Subject to technical alterations.

14

Tools for KOBSERT Threaded inserts

Machanical setting tool PH 830
Hydraulic-pneumatic drive Delivery scope: The installation tool is delivered with power unit E 250 with adjustable drive-in pressure ranging from 100 to 350 bar. Electric hydropump including electric foot pedal switch. A test assembly must be carried out to check drive-in pressure. Dimensions: M 8 to M 30 x 1.5 Functional principle: Spinning on the thread insert through tilting lever actuation, drive-in procedure hydraulic-pneumatic with separate activation or pedal actuation and removal through tilting lever actuation. Limited stroke due to adjusting collar. Change of threaded mandrel with bayonet lock. Application: Large series. All types of KOBSERT thread inserts can be installed. Technical data: Capacity up to 10 pieces/min, weight 5.0 kg, max. setting stroke 8.0 mm, max. setting force 77 kN, from M 14, a motor with higher performance is used. Basic tool Order no. 1061 170 0000 Power unit E 250 Order no. 1065 020 0000

Spares Replacement unit Order no. 1061 17xx y10 Threaded bolt Order no. 1061 17xx y20 Chuck Order no. 1061 17xx y30

xx: Metric specification y: 0 = standard thread / 4 = fine thread Example M 12 x 1.5: xx = 12; y = 4 Special threads on request (e.g. buttress threads S 18 x 2)

Tools for rent on request. Subject to technical alterations.

15

Bllhoff International with companies in:

Argentina Austria Brazil Canada China Czech Republic France Germany Hungary India Italy Japan Mexico Poland Romania Russia Slovakia Spain Turkey United Kingdom USA

Apart from these 21 countries, Bllhoff supports its international customers in other important industrial markets in close partnership with agents and dealers.

Made of paper certified with the Ecolab of the European Community (Reg No. FR/11/003). Printed by FSC-certified company GFA-COC-001790. Subject to technical change. Reprinting, even in extract form, only permitted with express consent. Observe protective note according to DIN 34.

Bllhoff Group Please find your local contact on www.boellhoff.com or contact us under [email protected]