Featuring built-in frequency jitter necessary for EMI, while also conserving power during standby!
High-Performance IPD with Frequency Jitter
for Small Charger/Adapter: MIP2Kx Series
Overview
MIP2Kx series is a high-performance IPD designed for 15W battery
chargers and featuring built-in frequency jitter function at PWM
control. It features built-in protection circuits necessary for compact
power source charger circuitry. This allows a significant reduction in
externally connected parts. It provides PWM control when a normal
load is applied and intermittent control with low load. This results in
greater efficiency for very low to maximum loads, while also
conserving power during standby.
Unit : mm
Pin No. Pin Name
1
VDD
2
FB
3
CL
VCC
Drain
Source
Source
Feature
Built-in jitter function
Built-in charge protection circuit
Built-in overcurrent, overheating, load shorting and overvoltage
protection circuits
Applications
Chargers (for DSC, etc.), AC adapter
DIP7-A1
Lineup
Output *1
Type No.
MIP2K2
Up to 5W
MIP2K3
Up to 8W
MIP2K4
Up to 10W
MIP2K5 *2
Up to 15W
Characteristic
VDSS
700V
ILIMIT
R(DS)ON
0.35A
16.5
0.50A
10
0.70A
1.0A
fosc
fM
100kHz
5.5kHz
260Hz
Package
DIP7-A1
*1 The electric power mentioned above depends on the transformer specification and ambient conditions. The information should be used only as a guide.
When using it within a case, output electric power may be decided by heat of IPD.
*2 All characteristic values are only for reference (still under development).
Comparison data of conduction noise
MIP2F4without jitter function
MIP2K4with jitter function
Average
Peak
Decentralized pulse by jitter function Lower the avarage
New publication, effective from 31 Oct. 2008
M00852BE
www.DataSheet.in
Frequency jitter function
By frequency jitter function, frequency jitter variation(f) changes periodically, by frequency of frequency jitter
modulation factor (fM) as shown below.
fosc=100kHz typ, f=5.5kHz typ, fM=260Hz typ
Frequency: Low
Frequency: High
Drain current
105.5kHz
f=5.5kHz
Frequency
fosc=100kHz (average value of frequency)
Time
94.5kHz
1/fM=1/260Hz
*All values are typical
Adapter circuit sample (MIP2K4)
Electric characteristics (MIP2K4Worldwide input, 8.3V/1.5A output)
Power efficiency
VI characteristics of adapter circuit
vs Po
Vo vs Io
100
9
8
80
[]
Vo [V]
6
5
4
60
40
100V
3
2
100V
240V
240V
20
0
0
0
Io [A]
10
12
Po [W]
Precautions on the Sales of IPDs
1) The sale and/or the export of IPD products to any customer or customers located in any country other than Japan is expressly prohibited by the
Agreement made and executed by and between Power Integrations, Inc. and Panasonic Corporation.
2) IPD products purchased from Panasonic Corporation, or its authorized agents, hereinafter referred to as our company, shall be used only for
production purposes by those parties who have duly purchased IPD products. Those who have purchased IPD products shall not use such IPD
products in unmodified form for re-sale, loan, or sample shipment for evaluation purposes to any other parties.
3) If a party who has duly purchased IPD products subcontracts its production to any other parties, including its subsidiaries or any other third parties
inside and/or out of Japan, and the IPD products are consigned to such subcontracting parties thereat, such party is obligated to monitor and control
the quantity of IPD products to prevent any of the aforementioned re-sale, loan or sample shipments from taking place.
4) In the event that any actual or threatened breach or violation of any of the above mentioned 1, 2, or 3, has occurred or is about to occur, Panasonic
Corporation will hold all shipments of IPD products and may request the party alleged to be responsible for such occurrence for necessary.
www.DataSheet.in
Parts No.
Able to supply
MIP2K
Domestic Japanese
companies
Japanese companies in
Asia (50% or more owned)
Disable to supply
European and American
companies
Local Asian companies
Other local companies
Application
For power supply
