Scribd
Upload
276 views2 pages

Shackle Specifications Guide

This document provides technical specifications for standard shackles, including nominal pin diameter, inside width and length dimensions for dee and bow shackles, and working load limits (WLL) in tonnes. It references using 11.67 tonnes as the WLL for a shackle when lifting with 2 points based on an earlier table, and lists tolerances on pin diameters according to another section.

Uploaded by

juantamad02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
276 views2 pages

Shackle Specifications Guide

This document provides technical specifications for standard shackles, including nominal pin diameter, inside width and length dimensions for dee and bow shackles, and working load limits (WLL) in tonnes. It references using 11.67 tonnes as the WLL for a shackle when lifting with 2 points based on an earlier table, and lists tolerances on pin diameters according to another section.

Uploaded by

juantamad02
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd

note: input in yellow box

16.5 from table 8-1


45 angle

11.67 2 points lifting --->> use this as WLL for shackle o


7.78 4 points lifting

Table D-1 Standard shackles


Nominal
Pin
Inside Inside length
Inside length
WLL
diameter* width at
of
of
(tonnes)
(mm)
pin
Dee shackles Bow shackles
(mm)
(mm)
(mm)
3.25
19
27
4.75
22
31
6.5
25
36
8.5
28
43
9.5
32
46.5
12
35
51.5
13.5
38
57
17
42
60
25
50
74
* According to [Link] the shacke pins
-0/+3 % on the diameter.

47
57
52
65
65
76
74
88
83
101
87
108
104
126
115
139
139
168
shall have a tolerance of

se this as WLL for shackle on Table D-1

You might also like