Scribd
Upload
2K views2 pages

Huawei A704516R0

This document provides specifications for the A704516R0 DX-690-960-65-16.5i-M-R EasyRET Single-Band Antenna with an integrated RCU. The antenna operates within a frequency range of 690-960 MHz with electrical and mechanical downtilt capabilities. Additional details include gain, beamwidth, power handling, wind loading, and connectivity specifications. The integrated RCU allows for remote electrical tilt of the antenna using AISG or 3GPP protocols with power consumption under 5W when active or 1.5W in standby mode.

Uploaded by

cosconor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
2K views2 pages

Huawei A704516R0

This document provides specifications for the A704516R0 DX-690-960-65-16.5i-M-R EasyRET Single-Band Antenna with an integrated RCU. The antenna operates within a frequency range of 690-960 MHz with electrical and mechanical downtilt capabilities. Additional details include gain, beamwidth, power handling, wind loading, and connectivity specifications. The integrated RCU allows for remote electrical tilt of the antenna using AISG or 3GPP protocols with power consumption under 5W when active or 1.5W in standby mode.

Uploaded by

cosconor
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
  • Antenna Specifications
  • Integrated RCU Specifications

A704516R0

DX-690-960-65-16.5i-M-R
EasyRET Single-Band Antenna with Integrated RCU - 2.0m

Antenna Specifications
Electrical Properties
690 - 960
Frequency range (MHz)
690 - 803 790 - 862 824 - 894 880 - 960
Polarization +45 , -45
Electrical downtilt () 0 - 12 , continuously adjustable
0 6 12 0 6 12 0 6 12 0 6 12
Gain (dBi)
15.4 15.5 15.2 15.8 15.9 15.5 16.0 16.1 15.7 16.1 16.4 15.8

Side lobe suppression for first side 0 6 12 0 6 12 0 6 12 0 6 12


lobe above main beam (Typ.) (dB) 18 17 15 16 17 15 16 17 15 16 17 15
Horizontal 3dB beam width () 69 68 67 65
Vertical 3dB beam width () 11.3 10.3 9.8 9.2
VSWR < 1.5
Isolation between ports (dB) 30
Front to back ratio, copolar (dB) Typ. 28
0 Typ. 18
Cross polar ratio (dB)
60 Typ. 10
Max. power per input (W) 500 (at 50 ambient temperature)
Intermodulation IM3 (dBc) -153 (2 x 43 dBm carrier)
Impedance () 50
Grounding DC Ground

Mechanical Properties 106


Antenna dimensions (H x W x D) (mm) 1936 x 298 x 149
Packing dimensions (H x W x D) (mm) 2365 x 360 x 230
Antenna weight (kg) 15.5
Clamps weight (kg) 2.9 (2 units)
Antenna packing weight (kg) 26.0 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature () -40 .. +65
1300
1936

Frontal: 810 (at 150 km/h)


Wind load (N) Lateral: 345 (at 150 km/h)
Rear side: 970 (at 150 km/h)
Max. operational wind speed (km/h) 150
Survival wind speed (km/h) 200
Connector 2 x 7/16 DIN Female
Connector position Bottom

Accessories
Item Model Description Weight Units per antenna

Downtilt kit ASMDT0C01 Mechanical downtilt: 0 - 12 1.9 kg 1 (Separate packing)

1
A704516R0
DX-690-960-65-16.5i-M-R
EasyRET Single-Band Antenna with Integrated RCU - 2.0m

Integrated RCU Specifications


Properties
RET type Integrated RET
RET protocols* AISG 2.0 / 3GPP
Input voltage range (V) 10 - 30 DC
< 5 (motor activated, 12V)
Power consumption (W)
< 1.5 (stand by, 12V)
Adjustment time (full range) (s) < 50 (typically, depending on antenna type)
2 x 8 pin connector according to IEC 60130-9
RET connector
Daisy chain in: Male / Daisy chain out: Female
1 2 3 4 5 6 7 8
Pin assignment according AISG
DC n/c RS-485B n/c RS-485A DC DC return n/c
3 (10/350 s)
Lightning protection (kA)
10 (8/20 s)

* Please confirm the AISG protocol of primary station is compatible with RET antenna protocol interface. The protocol of RET antenna software
interface is switchable between AISG 2.0/3GPP and AISG 1.1 with a vendor defined command. For more details about protocol swi tching function,
contact Huawei before system installation.

Standards: EN 60950-1 (Safety), EN 55022 (Emission), EN 55024 (Immunity), ETSI EN300386 (1.4.1), FCC part15
Certification: CE, FCC, RoHS, WEEE

Integrated RCU S/N: HWMxxx...r

r - Red

690 - 960 MHz

Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, [Link] [Link]
Any previous datasheet issues become invalid. 2 Issue: 2014-04-22

You might also like