Scribd
Upload
41 views4 pages

Structural Design Analysis for M40x40

This document provides design details for a reinforced concrete beam including dimensions, material properties, design forces, reinforcement, and checks for tension, shear, bearing plate, and reinforcement area. Key parameters include a 550mm deep beam with 3 #8 tension bars and 3 #7 closed stirrups designed to resist 97kN of shear and 20kN of tension. All design checks related to tension, shear, bearing plate capacity, and reinforcement area requirements are satisfied.

Uploaded by

Alejandro Rosero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
41 views4 pages

Structural Design Analysis for M40x40

This document provides design details for a reinforced concrete beam including dimensions, material properties, design forces, reinforcement, and checks for tension, shear, bearing plate, and reinforcement area. Key parameters include a 550mm deep beam with 3 #8 tension bars and 3 #7 closed stirrups designed to resist 97kN of shear and 20kN of tension. All design checks related to tension, shear, bearing plate capacity, and reinforcement area requirements are satisfied.

Uploaded by

Alejandro Rosero
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

MIDAS Information Technology Co.

, Ltd

MEMBER NAME : M40x40


1. General Information

(1) Design Code : NSR-10

(2) Unit System : N, mm

2. Material

(1) F'c : 21.00MPa

(2) Fy : 400MPa

(3) Fys : 400MPa

[Link]

1/4
MIDAS Information Technology Co., Ltd

3. Design Conditions

(1) Section

Depth (h) : 550mm

Cover : 40.00mm

Width (b) : 300mm

Span (l) : 0.150m

Distance to Vu (a) : 75.00mm

(2) Design Force

Shear Force (Vu) : 97.00kN

Tension Force (Nuc) : 20.00kN


75
3-#8

340
550

510

3-#7

150

(3) Rebar

Tension Rebar : 3-#8

Closed Stirrup : 3-#7

(4) Bearing Plate

Width : 200mm

Height : 50.00mm

(5) Friction Factor : 0.700

[Link]

2/4
MIDAS Information Technology Co., Ltd

4. Check Design Force

(1) Check Tension Force

Nuc = 20.00kN > 0.2Vu = 19.40kN

Vu = 97.00kN > 20.00kN O.K

5. Check Section

(1) Check a/d ratio

a/d = 0.147 < 1.000 O.K

(2) Calculate effective depth required

Vu
dreq'd = 0.2 f' b = 103mm < 510mm O.K
c w

6. Check Bearing Plate

(1) Calculate area of bearing plate

Vu
Areq'd = 0.85 f' = 8,360mm < 10,000mm O.K
c

= 0.650(Bearing)

7. Check Rebar Area

(1) Calculate rebar area for direct tension

Nuc
An = f = 66.67mm
y

Vu a + Nuc (h-d)
Af = fy 0.9d =58.64mm

Areq'd = An + Af = 125mm

Aapplied = 1,529mm

Areq'd / Aapplied = 0.0820 O.K

[Link]

3/4
MIDAS Information Technology Co., Ltd

8. Check Shear Strength

(1) Calculate rebar area

Avf = 2,323 + 1,529 = 3,852mm

(2) Calculate shear strength

Vn = Avf fy = 1,078kN

Vn,max1 = 0.2 f'c Ac = 643kN

Vn,max2 = (3.3 + 0.08 f'c) Ac = 762kN

Vn,max3 = 11 Ac = 1,683kN

Vn = 482kN

Vu / Vn =0.201 O.K

9. Determine Bar Area

(1) Calculate rebar area

Vu
Avf = f = 462mm
y

(2) Determine primary tension rebar

As1 = 2Avf/3 + An = 375mm

As2 = Af + An = 125mm

f'c
Asmin = 0.04 f Ac =321mm
y

As = max(As1, As2, Asmin) =375mm, Aapplied = 1,529mm

As / As,applied =0.245 O.K

(3) Determine shear rebar (Closed stirrups).

Ah 0.5(As - An) =154mm, Aapplied = 2,323mm

Ah / As,applied =0.0663 O.K

Space = (2/3d)/n = 113mm

[Link]

4/4

You might also like