Scribd
Upload
78 views5 pages

Unbrick Instructions R5

1. The document provides unbricking instructions for a device using a Windows PC. 2. It instructs the user to enable test mode on the PC, unzip firmware and driver files, and hold the volume button while connecting the device to manually install drivers. 3. When complete, the download process will begin and take about 5 minutes, after which the user can power on the now unbricked device.

Uploaded by

azziejay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
78 views5 pages

Unbrick Instructions R5

1. The document provides unbricking instructions for a device using a Windows PC. 2. It instructs the user to enable test mode on the PC, unzip firmware and driver files, and hold the volume button while connecting the device to manually install drivers. 3. When complete, the download process will begin and take about 5 minutes, after which the user can power on the now unbricked device.

Uploaded by

azziejay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

Unbrick Instructions

Request:

 PC with Windows 7
 USB cable

Steps:

1. Set the computer totest mode: go to "Start" -- "Accessories" -- "Command


Prompt"(run as administrator)

2. Enter "bcdedit /set testsigning on" and press enter -- restart the computer.
3. After restart, you’ll see this above notification bar

4. Unzip the downloaded firmware (WinRAR recommended)


5. Open the unbrick tool -- "[Link]"(right click run as administrator),
and click “Start download”
6. Unzip the driver file "driver For OPPO Find 5"
7. Hold the Power off button for 8 seconds and then release it to shout down completely
8. Hold volume+ key (do not release until connect to computer) -> Connect you phone
with the computer ->Release volume+ key ->Go to “Device Manager” of your PC ->
install the drivermanually
9. When finished, you'll see port “Qualcomm HS-USB QDLoaderXXXX” turned into
“Qualcomm HS-USB Diagnostics XXXX”. Then download willbegin，you can see the
progress baris moving.
10. After about 5 min, you'llsee a green notification, which means the download is
finished. Disconnect your phone from the computer and long press the power button
for about 10 seconds to power on.

You might also like