Scribd
Upload
58 views1 page

Diagramma Di Stato LPC PDF

This document contains a state diagram that outlines the logic and functional cycle of a variable frequency drive (VFD). The diagram shows the different states the VFD can be in, such as "Forward", "Reverse", "Stand-by", and "STOP due to Anomaly". It also displays the conditions needed to transition between each state, including changes to inputs like current, frequency, and commands from local or remote control. The functional cycle is shown moving between "Forward" and "Reverse" states depending on the input current range of 12.7 to 14.5 milliamps.

Uploaded by

pietro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
58 views1 page

Diagramma Di Stato LPC PDF

This document contains a state diagram that outlines the logic and functional cycle of a variable frequency drive (VFD). The diagram shows the different states the VFD can be in, such as "Forward", "Reverse", "Stand-by", and "STOP due to Anomaly". It also displays the conditions needed to transition between each state, including changes to inputs like current, frequency, and commands from local or remote control. The functional cycle is shown moving between "Forward" and "Reverse" states depending on the input current range of 12.7 to 14.5 milliamps.

Uploaded by

pietro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Forward @ fn+1 =fn +(i‐13,6)*16      12,7<i<14,5 ma  (f0 = 25 Hz)  Start Stand‐by  12,7<i<14,5 ma       Remote

LSLLs ON        LSLs ON ‐> OFF       LSHs OFF           LSHHs ON‐>OFF LSLLs ON        LSLs ON  LSHs OFF       LSHHs OFF


LSLLd ON       LSLd OFF‐>ON         LSHd OFF‐>ON  LSHHd OFF LSLLd ON       LSLd ON         LSHd OFF     LSHHd OFF

Transition from “STOP 
due to Anomaly” to 
“Stand‐by” by 
removing anomalies 
and by restoring stand‐
by conditions
LSHHs OFF‐> ON LSHd OFF‐> ON

Local 
Reverse @ 10 Hz 12,7<i<14,5 ma  Forward @ 10 Hz 12,7<i<14,5 ma 
LSLLs ON        LSLs ON          LSHs ON          LSHHs OFF‐>ON STOP due to Anomaly  LSLLs ON        LSLs ON          LSHs ON          LSHHs OFF
LSLLd ON       LSLd OFF         LSHd OFF LSHHd OFF LSLLd ON       LSLd OFF         LSHd OFF LSHHd OFF‐>ON
Remote

LSHs OFF‐> ON LSHHd OFF‐> ON

Transition to “STOP due to Anomaly” Reverse @ fn+1 =fn +(i‐13,6)*16         12,7<i<14,5 ma 


from  every phase, inclusive “Local” if LSLLs ON        LSLs OFF ‐> ON       LSHs OFF‐> ON   LSHHs OFF
• STOP command LSLLd ON       LSLd ON‐>OFF         LSHd OFF LSHHd ON ‐> OFF
• VFD/motor anomaly 
• i exceeds limits 12,7 < i < 14,5 ma Local 12,7<i<14,5 ma  Local commands are enabled
• f exceeds limits 9 < f < 61 Hz LSLLs ON        LSLs ANY         LSHs ANY       LSHHs OFF
• Any input unduly changes   State diagram of the VFD Logic LSLLd ON       LSLd ANY         LSHd ANY     LSHHd OFF
• Any input expected to change  Functional cycle in blue
doesn’t within time‐out (f) (TBD)

You might also like