HT7051 Rel.1.
01 of 12/09/2008
Professional insulation meter up to 5kVDC Pag 1 of 3
1. ELECTRICAL SPECIFICATION
Uncertainty is indicated as ± (% rdgs + no. of dgt) at 23°C ± 5°C, con relative humidity <80%HR
DC/AC TRMS VOLTAGE
Range Resolution Uncertainty Overload protection
10 ÷ 660V 1V ±(2%rdg+2dgt) CAT IV 600 to ground
INSULATION RESISTANCE
Range Test Voltage Resolution Uncertainty (*)
0.01MΩ ÷ 0.19MΩ ±(5%rdg + 7dgt)
≥ 100V DC
0.20MΩ ÷ 199GΩ Test Voltage
0.20MΩ ÷ 499GΩ ≥ 250V DC ±(5%rdg.+3dgt) if Rmis ≤
0.20MΩ ÷ 999GΩ ≥ 500V DC ≤1%rdg 5nA
0.20MΩ ÷ 1.99TΩ ≥ 1000V DC
Test Voltage
0.20MΩ ÷ 4.99TΩ ≥ 2500V DC ±(20%rdg.+3dgt) if Rmis >
0.20MΩ ÷ 9.99TΩ 5000V DC 5nA
(*) Load Capacitance < 1nF
GENERATED TEST VOLTAGE (compliance to IEC/EN61557-2)
Test mode Nominal test voltage Uncertainty
FIX 100V,250V,500V,1kV, 2.5kV, 5kV
100 ÷ 1kV in steps of 25V
AJUSTABLE
1kV ÷ 5kV in steps of 50V -0%, +10% +15V
100 ÷ 1kV in steps of 25V
RAMP
1kV ÷ 5kV in steps of 50V
TEST CURRENT
Test Voltage Test current
100 ÷ 5000V 1mA ≤ Test Current ≤ 3mA (**)
(**) Test current automatically controlled.
TEST TIME
Setting Range Resolution
5s – 99min 59s 1s
CAPACITANCE
Range Resolution Resistance Load Test Voltage (Vn) Uncertainty
1nF ÷ 999nF 1nF
Vn ≤ 5kV
1.00µF ÷ 5.00µF 0.01µF
1nF ÷ 999nF 1nF
1.00µF ÷ 9.99µF 0.01µF Vn ≤ 2.5kV
≥ 5MΩ ±(10%rdg+5dgt)
10.0µF ÷ 19.9µF 0.1µF
1nF ÷ 999nF 1nF
1.00µF ÷ 9.99µF 0.01µF Vn ≤ 1kV
10.0µF ÷ 49.9µF 0.1µF
Capacitor charge time (OVÆ 5000V): < 3s x 1µF
Capacitor discharge time (5000VÆ 25V): < 5s x 1µF
HT ITALIA srl Tel: +39-0546-621002 - Fax: +39-0546-621144
Via della Boaria 40 - 48018 Faenza (RA)- Italy email:
[email protected] - web: http://www.htitalia.com
HT7051 Rel.1.01 of 12/09/2008
Professional insulation meter up to 5kVDC Pag 2 of 3
LEAKAGE CURRENT
Range Resolution Uncertainty
1nA ÷ 99.9nA 0.1nA Test Voltage
100nA ÷ 999nA 1nA ±(7%rdg+3dgt) if Rmis ≤
1.00µA ÷ 9.99µA 0.01µA 5nA
10.0µA ÷ 9.99µA 0.1µA
Test Voltage
100µA ÷ 999µA 1µA ±(22%rdg+3dgt) if Rmis >
1.00mA ÷ 2.5mA 0.01mA 5nA
P.I (Polarization Index) – D.A.R (Dielectric Absorption Ratio)
Range Resolution Uncertainty
Test Voltage
±(5%rdg+3dgt) if Rmis ≤
5nA
0.01 ÷ 9.99 0.01
Test Voltage
±(20%rdg+3dgt) if Rmis >
5nA
(*) Load Capacitance < 1nF
HT ITALIA srl Tel: +39-0546-621002 - Fax: +39-0546-621144
Via della Boaria 40 - 48018 Faenza (RA)- Italy email:
[email protected] - web: http://www.htitalia.com
HT7051 Rel.1.01 of 12/09/2008
Professional insulation meter up to 5kVDC Pag 3 of 3
2. GENERAL CHARACTERISTICS
DISPLAY, MEMORY, SERIAL INTERFACE
• Backlight LCD with three simultaneous readings:
Group 1 (main) Æ Insulation Resistance, Leakage Current, PI, DAR, Capacitance
Group 2 Æ Test voltage (nominal and generated)
Group 3 Æ Test Time
• Bargraph: 32 segments
• Low battery indications
• Memory: 700 test
• Communication interface: RS232 optoinsulated
POWER SUPPLY:
• Internal battery charger, power supply: 220-240V 50/60Hz, 20VA
• Internal NiMH rechargeable battery
• Protection fuse on power supply: T 200mA/250V, Ir: 1.5kA
• Low battery indication: symbol at display
• Battery life: >1000 Test @ 5kV on 5MΩ (test time: 5s, delay between two test: 25s)
according to IEC/EN61557-2. (par. 6.7)
• AutoPowerOFF: after 5min since last operation
ENVIRONMENT:
• Ref. Temperature: 23°C ± 5°C
• Working temperature: 0° ÷ 40°C
• Maximum relative humidity: < 80%UR
• Storage temperature: -10 ÷ 60°C
• Storage humidity: < 80%UR
MECHANICAL DATA:
• Dimensions: 360(L) x 310(W) x 195(H) mm
14.2‘’ (L) x 12.2’’(W) x 7.7’’(H)
• Weight: about 3.5kg
about 7.8lv
GUIDELINES
Instrument’s safety IEC/EN61010-1, IEC/EN61557-1, IEC/EN61557-2
Technical documentatiion : IEC/EN61187
Accessories safety : IEC/EN61010-031
Insulation: Double insulation
Type of Protection: 2
Mechanical protection: IP40 (open case), IP53 (closed case)
Over voltage category: CAT IV 600V to ground, max 600V between inputs
Maximum altitude max altitude 2000m
Patented certification: TÜV protocol conformity
This instrument complies with the requirements of the European Low Voltage Directives 2006/95/EEC
(LVD) and EMC 2004/108/EEC
HT ITALIA srl Tel: +39-0546-621002 - Fax: +39-0546-621144
Via della Boaria 40 - 48018 Faenza (RA)- Italy email:
[email protected] - web: http://www.htitalia.com
