GRUNDFOS DATA BOOKLET

LS
Horizontal split-case pumps
50 Hz
 LS

1. Applications 4
Table of contents

2. Features and benefits 5

3. Performance range 6
LS 2-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
LS 4-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
LS 6-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

4. Product range 8
Pump configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Pump range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

5. Identification 9
Nameplate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Type key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

6. Construction 12
LS pump, standard construction type 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LS pump, standard construction type 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LS pump, standard construction type 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LS pump, standard construction type 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LS pump, optional construction type 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
LS pump, optional construction type 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
LS pump, typical end view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Standard components and material specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Mechanical construction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7. Operating conditions 20
Ambient temperature and altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Liquid temperatures and shaft seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Pressure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Flow rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Maximum particle size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

8. Installation 22
Mechanical installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Measuring instruments. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Pipes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

9. Selection of product 27
Pump size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Efficiency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Motor size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Pumped liquids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

10. Performance tests 30

Certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Witness test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

11. Introduction to performance curves and technical data 31

How to read the curve charts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Curve conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

12. Performance curves and technical data 33

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
4-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
6-pole . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

13. Electrical data 120

Standard motor brands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
Other motor brands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122

2
LS

14. Bare shaft pump 124

Table of contents
Standard pump flange dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Optional pump flange dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
Counterflange dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
Tap and drain plug dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

15. Other motor brands 133

Dimensional correction tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133

16. Grundfos GO 134

17. Grundfos Product Center 135

3
1 LS

1. Applications
Applications

Irrigation and aquaculture

• Field irrigation (flooding)
• sprinkler irrigation.

TM04 7807 2110

TM03 3903 1106

Fig. 1 Grundfos single-stage LS pump

The Grundfos LS pumps are used for liquid transfer

and pressure boosting in these main fields of
application: Fig. 2 LS pump in industrial pressure boosting
• Commercial systems
• industrial systems
• water distribution
• irrigation.

Commercial systems
• Air-conditioning and chilled-water systems
• water-condensing systems and cooling towers
• boiler-feed and condensate systems
• district heating plants and heating systems

GR 2910
• district cooling plants
• swimming pools and fountains.
Fig. 3 LS pump in sprinkler irrigation
Industrial systems
• Process-cooling and chilled-water systems
• industrial heating systems
• wash-down and cleaning systems.

Water distribution and water treatment

• Public waterworks
• potable and non-potable water systems.

4
LS
2

2. Features and benefits

Features and benefits

The Grundfos LS horizontal split-case pump is a
single-stage, centrifugal volute pump with high energy
efficiency and low life-cycle costs.
Ease of service and long-term reliability are two of the
selling features of the LS pumps. The split-case design

TM04 7331 1910

enables removal and dismantling of the internal pump
parts (bearings, wear rings, impeller, and shaft seals)
without disturbing the motor or pipes. The two-bearing
design means less vibration and higher reliability. The
separate bearing housings allow for inspection of the Fig. 4 LS pump with motor and base frame
seals and bearings without removing the top half of the
casing.
The double-suction design reduces axial forces by
directing flow into both sides of the impeller. The
double-volute design, available on most models,

TM05 5003 2712

reduces the radial load and minimises noise and
vibration.
• LS pumps cover this performance range:
Flow rate: 10 to 2500 m3/h.
Head: 5 to 235 m. Fig. 5 LS bare shaft pump with base frame, coupling and
Motor (P2): 1.5 to 630 kW. guard
• The pumps are non-self-priming, centrifugal volute
pumps with radial inlet and radial outlet ports and a
horizontal shaft.
• Inlet and outlet flanges are PN 16 according to EN

TM05 5875 3912

1092-2 (DIN2501). The pumps are also available
with PN 10 flanges for the low-pressure range.
• The pump is long-coupled with a totally enclosed
fan-cooled standard motor with main dimensions to
Fig. 6 LS bare shaft pump
IEC and DIN standards and mounting designation
B3 (IM 1001).
• The rotating assembly is dynamically balanced
according to ISO 1940 class G6.3.
• Impellers are hydraulically balanced.
• Pump and motor are mounted on a common base
frame in the form of a welded, steel C-channel
profile.
• Grundfos LS pumps are available in three different
variants:
1. Pump with motor and base frame, see fig. 4.
2. Bare shaft pump, i.e. pump without motor, with
base frame, see fig. 5.
3. Bare shaft pump, i.e. pump without motor, without
base frame, see fig. 6.

5
3 LS

3. Performance range
Performance range

Grundfos LS pumps are available with 2-, 4- or 6-pole

motors.
The next three pages show the performance range
covered by these three motor types.
Knowing your required duty point, use the performance
ranges like this:
1. Go into the relevant performance range chart.
2. Find your duty point.
3. Note which pump type covers your duty point.
4. Go to the Pump range section on page 8 and find
the selected pump. Go to the listed page number in
section 12. Performance curves and technical data
to find more detailed information on your chosen
pump.

LS 2-pole
p H
[kPa] [m] LS
2-pole, 50 Hz
140

120

1000 100
900

800 80

700
65-50-241B 100-80-241E 125-100-279E 125-100-305F

600 60

500 50

400 40

300 30

TM07 2781 4118

200 20
25 30 40 50 60 80 100 150 200 250 300 400 500
Q [m³/h]
7 8 9 10 20 30 40 50 60 70 80 90 100 Q [l/s]

6
LS
3
LS 4-pole

Performance range
p H
[kPa] [m] LS
250
4-pole, 50 Hz
2000 200
250-200-575Ax2

150
200-150-475Ax2
120
150-125-415Ax2 350-250-630B
1000 100
200-150-508B
800 80 350
700 -25
125-100-370Ax2 0-4
98C
300-200-489C
600 60 200-150-483D

500 50 150
-125
-381
F
400 40
125-100-381F
200-150-381A 250-200-381B
300 30
450-350-397B
25 65-50-330D 100-80-356E
125-100-305F
200 20
150-125- 250-200-305C
305E
15
300-250-381B
65-50-241B 100-80-241E 200-150-305C 300-250-305E
12
100 10
125-100-279E
80 8
70
60 6

TM07 2782 4118

50 5
20 25 30 40 50 60 80 100 150 200 250 300 400 500 600 800 1000 1500 2000 2500
Q [m³/h]
6 7 8 9 10 20 30 40 50 60 70 80 100 200 300 400 Q [l/s]

LS 6-pole
p H
[kPa] [m] LS
1000 100 6-pole, 50 Hz
800 80
250-200-575Ax2
700
600 60
200-150-475Ax2
500 50 350-250-630B
150-125-415Ax2
400 40
125-100-370Ax2 200-150-508B
350-2
300 30 50-4
98C
300-200-489C 350-300-508C
200-150-483D

200 20
150-125-381F 200-150-381A 250-200-381B
15
450-350-397B
12
100 10
300-250-381B
80 8
70 200-150-305C 250-200-305C 300-250-305E
60 6
50 5
40 4

30 3
TM07 2783 4118

20 2
80 100 150 200 250 300 400 500 600 800 1000 1500 2000 2500
Q [m³/h]
23 30 40 50 60 70 80 90 100 200 300 400 500 Q [l/s]

7
4 LS

4. Product range
Product range

Pump configurations
Standard configuration Optional configuration

Pump casing Cast iron Ductile iron

Shaft Stainless steel Duplex stainless steel

Impeller Stainless steel Bronze

Wear rings Bronze Stainless steel

Coupling Flexible grid/Pin and bush Spacer coupling

Shaft seal Mechanical seal Stuffing box

Flange EN 1092-2 (DIN 2501), PN 16 EN 1092-2 (DIN 2501), PN 10 and PN 25

Flushing line - Nylon, stainless steel, copper

• High-voltage motor
• IE3 motor, MMG-G
Motor • Siemens IE4 motor, up to 200 kW
• IE3 motor (MG, Siemens)
• MMG-H IE3 motor
Motor bearing - Insulated bearing

Pump direction of rotation (seen from motor side) CW - clockwise CCW - counterclockwise

To a great extent the pumps can be adapted to the requirements of the individual customer. For customised solutions,
contact your local Grundfos company.

Pump range
The table below gives an overview of the LS pump LS pumps are available with 2-, 4- or 6-pole motors;
range (PN16). The PN 10 pump range does not other motor pole numbers are available on request.
include all impeller sizes (see individual performance LS pumps are available in two different construction
curves). types, both with mechanical shaft seal.
The product range includes the pumps found in
Grundfos Product Center.
Motor range [kW] Standard construction type Optional construction type
Pump sizes
3)
2-pole 4-pole 6-pole 1 2 3 4 1 2
LS 65-50-241 11-45 1.5 - 5.5 - ● - - - ● -
LS 65-50-330 - 4.0 - 15 - ● - - - ● -
LS 100-80-241 15-75 2.2 - 7.5 - ● - - - ● -
LS 100-80-356 - 7.5 - 30 - ● - - - ● -
LS 125-100-279 18.5 - 90 2.2 - 15 - ● - - - ● -
LS 125-100-305 30-90 4.0 - 22 - ● - - - ● -
LS 125-100-381 - 11-75 - ● - - - ● -
LS 125-100-388 - 11-75 - - - - ● -
LS 150-125-305 - 15-75 - ● - - - ● -
LS 150-125-381 - 5.5 - 37 7.5 - 22 ● - - - ● -
LS 200-150-305 - 11-45 4.0 - 18.5 ● - - - ● -
LS 200-150-381 - 18.5 - 110 11-45 ● - - - ● -
LS 200-150-483 - 55-160 15-45 ●1) ●2) - - ● ●
LS 200-150-508 - 55-250 18.5 - 75 - ● - - - ●
LS 250-200-305 - 15-55 5.5 - 30 ● - - - ● -
LS 250-200-381 - 30-160 11-45 ● - - - ● -
LS 300-200-489 - 110-355 37-110 - ● - - - ●
LS 300-250-305 - 30-90 11-30 ● - - - ● -
LS 300-250-381 - 55-200 18.5 - 55 ● - - - ● -
LS 350-250-498 - 160-500 45-200 - ● - - - ●
LS 350-250-630 - 250-630 75-315 - ● - - - ●
LS 350-300-508 - - 55-200 - ● - - - ●
LS 400-350-397 - 110-250 37-75 - - - - - ●
LS 450-350-397 - 110-250 37-75 - ● - - - ●
LS 125-100-370x2 - 37-90 - - - ● - - -
LS 150-125-415x2 - 55-160 - - - ● - - -
LS 200-150-475x2 - 110-315 37-90 - - ● - - -
LS 250-200-575x2 - 250-600 90-220 - - - ● - -

1)
Construction type 1 is for 55-90 kW, 4-pole and 15-45 kW, 6-pole.
2)
Construction type 2 is for values above 90 kW, 4-pole.
3) For 6-pole models with grey background, the pump impeller is only available with stainless steel, not with bronze with sleeve.

8
LS
5

5. Identification

Identification
Nameplate
The pump nameplate gives the details of the pump.

1 2 3 4 5 7

99476910
7\SH LS100-80-242E/235 1F2DS BBQE 1 11/4 Q 80 m3/h
Model 99281199 P1 1832 0001 WRAS23C H 27

TM07 2166 3118

SW 16/100 bar/°Cmax n 1755 min-1
Assembled in ;;;; ȘS 73.9 %
Refer LS I/O for lubrication instruction DK - 8850 Bjerringbro, Denmark

6 11 10 12 13 9 8
Fig. 7 Nameplate of LS pump

Pos. Description Pos. Description Pos. Description

1 Type designation 6 Maximum pressure and temperature Reference to LS installation and operating
11
2 Product number 7 Rated flow rate (duty-point flow rate) instructions for bearing lubrication
3 Place of production 8 Head at rated flow rate (duty-point head) Liquid temperature rating, only for WRAS-
12
4 Production year and week 9 Speed approved pumps
Hydraulic pump efficiency at optimum
5 Serial number 10 Country of production 13
efficiency point

Type key
Example LS 125 -100 -305X /273.1 , (W) 1 F2 D S BBQE 1

Type range
LS horizontal version

Nominal diameter of the inlet port (DN)

Nominal diameter of the outlet port (DN)

Maximum impeller diameter [mm]

If suffix is used:
"X" = different impeller or construction design for single-stage pump, such as A, B, C....Z.
"x2" = double-stage impeller design.

Actual impeller diameter [mm]

Potable-water code (optional)

ACS- or WRAS-certified pump

Pump variant

1: Basic version, grease-lubrication, pump with motor, common base frame, standard coupling
2: Grease-lubrication, bare shaft pump with common base frame, standard coupling
3: Grease-lubrication, bare shaft pump
4: Grease-lubrication, pump with motor, separate base frames, spacer coupling
5: Grease-lubrication, bare shaft pump with separate base frame, spacer coupling
6: Oil-lubrication, pump with motor, common base frame, standard coupling
7: Oil-lubrication, bare shaft pump with common base frame, standard coupling
8: Oil-lubrication, bare shaft pump
9: Oil-lubrication, pump with motor, separate base frames, spacer coupling
0: Oil-lubrication, bare shaft pump with separate base frame, spacer coupling
X: Special variant

Code for pipe connection

F1: 10 bar, DIN PN 10 G1: 175 PSI (12 bar), ANSI 125LB/150LB
F2: 16 bar, DIN PN 16 G2: 250 PSI (17.2 bar), ANSI 250LB/300LB
F3: 25 bar, DIN PN 25 G3: 400 PSI (27.6 bar), ANSI 250LB/300LB
XX: Special flanges

9
5 LS
Identification

Example LS 125 -100 -305X /273.1 , (W) 1 F2 D S BBQE 1

Code for shaft and sleeve materials

D: SS420 and no sleeve A: SS420 and SS304

E: SS304 and no sleeve C: SS420 and SS316
J: SS316 and no sleeve B: SS420 and bronze
L: Duplex stainless steel and no sleeve K: Duplex stainless steel and duplex stainless steel
X: Special

Code for pump casing and impeller materials

S: Cast iron and SS304 Q: Ductile iron and SS304

C: Cast iron and SS316 G: Ductile iron and SS316
B: Cast iron and bronze A: Ductile iron and bronze
D: Cast iron and duplex stainless steel H: Ductile iron and duplex stainless steel
U: SS304 and SS304 J: SS316 and SS316
K: Duplex stainless steel and duplex stainless steel
X: Special

Code for shaft seal or stuffing box

BAQE: Rubber bellows seal, unbalanced, carbon*/SiC, EPDM

BAQV: Rubber bellows seal, unbalanced, carbon*/SiC, FKM
AAQE: O-ring seal, unbalanced, carbon*/SiC, EPDM
AAQV: O-ring seal, unbalanced, carbon*/SiC, FKM
DAQE: O-ring seal, balanced, carbon*/SiC, EPDM
DAQV: O-ring seal, balanced, carbon*/SiC, FKM
SAQE: Rubber bellows seal, balanced, carbon*/SiC, EPDM
SAQV: Rubber bellows seal, balanced, carbon*/SiC, FKM
BBQE: Rubber bellows seal, unbalanced, carbon/SiC, EPDM
BBQV: Rubber bellows seal, unbalanced, carbon/SiC, FKM
ABQE: O-ring seal, unbalanced, carbon/SiC, EPDM
ABQV: O-ring seal, unbalanced, carbon/SiC, FKM
DBQE: O-ring seal, balanced, carbon/SiC, EPDM
DBQV: O-ring seal, balanced, carbon/SiC, FKM
SBQE: Rubber bellows seal, balanced, carbon/SiC, EPDM
SBQV: Rubber bellows seal, balanced, carbon/SiC, FKM
BQQE: Rubber bellows seal, unbalanced, SiC/SiC, EPDM
BQQV: Rubber bellows seal, unbalanced, SiC/SiC, FKM
AQQE: O-ring seal, unbalanced, SiC/SiC, EPDM
AQQV: O-ring seal, unbalanced, SiC/SiC, FKM
DQQE: O-ring seal, balanced, SiC/SiC, EPDM
DQQV: O-ring seal, balanced, SiC/SiC, FKM
SQQE: Rubber bellows seal, balanced, SiC/SiC, EPDM
SQQV: Rubber bellows seal, balanced, SiC/SiC, FKM
BBVP: Rubber bellows seal, carbon/aluminium oxide, nitrile rubber
SNEK: Stuffing box with synthetic polymer packing rings, uncooled, with internal barrier fluid

Direction of rotation
(Pump direction of rotation as seen from the motor end)

1: Clockwise
2: Counterclockwise

* Antimony, not approved for potable water.

The example shown is an LS 125-100-305F/273.1
standard type with standard coupling, DIN PN 16
flange, cast iron pump casing with SS304 impeller,
BBQE mechanical shaft seal and clockwise direction of
rotation.

10
LS
5
Codes for mechanical shaft seal

Identification
Positions (1) - (4) cover four pieces of information
about the mechanical shaft seal:

Example (1) (2) (3) (4)

Grundfos type designation

Material, rotating seal face
Material, stationary seat
Material, secondary seal and other rubber and composite parts

The following table explains the positions (1), (2), (3)

and (4).

Pos. Type Short description of seal

A O-ring seal, unbalanced
B Rubber bellows seal, unbalanced
(1) D O-ring seal, balanced
S Rubber bellows seal, balanced
H Cartridge seal, balanced
Pos. Type Material
Carbon, metal-impregnated (antimony, not
A
approved for potable water)
Carbon, resin-impregnated (approved for
(2) and B
potable water)
(3)
Q Silicon carbide
U Tungsten carbide
V Aluminium oxide
Pos. Type Material
E EPDM
(4) P Nitrile rubber (NBR)
V FKM (Viton®)

For other mechanical shaft seal variants, please

contact Grundfos.

Codes for stuffing box

Pos. Code Short description of stuffing box
1 S Stuffing box with packing rings
Cooling method
2
N Uncooled stuffing box
Barrier fluid
3
E With internal barrier fluid
Synthetic polymer packing rings, graphite
4 K
impregnated. NBR O-ring in the pump

11
6 LS

6. Construction
Construction

Grundfos LS horizontal split-case pumps are available

in two different construction types.
The construction types are available with stuffing
boxes and packing rings as an option. There are small
differences within each construction type. For further
information, see detailed exploded views of the
variants in Grundfos Product Center.

LS pump, standard construction type 1

195 113f 79 114 109 105c 11 17 6a 49 1 113g 53 114a

54c

54e

113d
67b

11a
113e

54

6b

TM07 1143 1118

45 24 51 124 113c

Fig. 8 Sectional drawing, standard construction type 1, with mechanical shaft seals

12
LS
6
LS pump, standard construction type 2

Construction
113f 58 110 124 105c 67b 11 17 6a 105 79 53 114a

195
113c

54c 113g

54e
11a

54

58a

113d

113e

114b

114

45

TM07 1144 1118

6b 49 24 51 109 113

Fig. 9 Sectional drawing, standard construction type 2, with mechanical shaft seals

LS pump, standard construction type 3

113d 54 124 113f 79 116b 109 116c 47c 45 17 49 45 116 11 32 6a 105 51 124 53 113c 11a

116a

54e

113g

54c
TM07 1156 1118

113e 123 106 107 108 47d 49 24 66 6b

Fig. 10 Sectional drawing, standard construction type 3

13
6 LS

LS pump, standard construction type 4

Construction

113d 54 113 116b 106 108 47d 6a 51 45 49 45 17 116 49 116c 32 116e 105 116a 53 113c 11a

54e

54c
123

113f

113g
113e

79 107 109 47c 66 24 11 6b 58 124 113 113e

TM07 1157 1118

Fig. 11 Sectional drawing, standard construction type 4

LS pump, optional construction type 1

TM07 1152 0319

Fig. 12 Sectional drawing, optional construction type 1

14
LS
6
LS pump, optional construction type 2

Construction
124 109a 116e 6a 17 11 20e 20d 105 58 58a 113 53 195 114a

109

110

116b

113f

113e

54e 113g

113d

11a
54c

123

54 113c

116a

114b

TM07 1153 1118

114

79 51 24 49 45 116c 66 116

Fig. 13 Sectional drawing, optional construction type 2

LS pump, typical end view

Non-drive end

TM04 1864 1108

Fig. 14 Typical end view (non-drive end)

15
6 LS

Standard components and material specification

Construction

Pos. Description Material Material standard

Cast iron ASTM A48 Class 35
6a Pump casing, upper
Ductile iron ASTM A536, 65-45-12
Cast iron ASTM A48 Class 35
6b Pump casing, lower
Ductile iron ASTM A536, 65-45-12
11 Key, impeller Steel ASTM A216 WCB
11a Key, coupling Steel ASTM A216 WCB
17 Vent screw Bronze
20 Drain plug Steel
20a Plug, drain outlet Steel
20b Plug, inlet Steel
20c Plug, outlet Steel
20d Plug, shaft seal flushing Steel
20e Plug, Inlet chamber Steel
24 Locking pin, wear ring Steel ANSI/ASME B18.8
26b Roll pin Steel ANSI/ASME B18.8
26c Screw for pump casing Steel
32 Flushing pipe Stainless steel AISI 304
45 Wear ring Bronze ASTM B584, C90500
47c Retainer for packing Steel ASTM A216 WCB
47d Snap ring for packing Carbon steel
49 Impeller Stainless steel ASTM CF8
51 Shaft Stainless steel AISI 420
53 Bearing, drive end Steel
54 Bearing, non-drive end Steel/bronze
54c Lock washer Steel
54d Circlip Steel ASTM A216 WCB
54e Round nut for bearing Steel ASTM A216 WCB
58 Seal cover Cast iron ASTM A48 Class 35
58a Screw Steel
65 Snap ring Stainless steel
66 O-ring for sleeve NBR
67b Round nut for impeller Stainless steel
72a Gasket Vegetable fibre
76 Nameplate Stainless steel AISI 304
79 Slinger Neoprene
105 Shaft seal BBQV/GBQV SiC/Carbon
105c Seal retaining ring Stainless steel AISI 304
106 Packing gland Cast iron ASTM A48 Class 35
107 Packing ring PTFE PTFE
108 Distribution ring Steel ASTM A216 WCB
109 O-ring NBR
109a O-ring NBR
110 O-ring NBR
113 Bearing housing Cast iron ASTM A48 Class 35
113c Bearing cover, drive end Cast iron ASTM A48 Class 35
113d Bearing cover, non-drive end Cast iron ASTM A48 Class 35
113e Gasket Vegetable fibre
113f Lip seal, non-drive end NBR
113g Lip seal, drive end NBR
114 Screw for seal housing Steel
114a Screw for bearing cover Steel
114b Screw for bearing housing Steel
116 Shaft sleeve Stainless steel AISI 304
116a Locking sleeve, drive end Stainless steel AISI 304
116b Locking sleeve, non-drive end Stainless steel AISI 304
116c Shaft sleeve, inner Stainless steel AISI 304
116e Screw for shaft sleeve Steel
123 Shoulder ring Steel
Cast iron ASTM A48 Class 35
124 Seal housing
Ductile iron ASTM A536, 65-45-12
195 Lubricating nipple Bronze

16
LS
6
Mechanical construction Bearings

Construction
Position numbers in the following section refer to the LS pumps are fitted with two standard single-row deep-
sectional drawings and material specification groove ball bearings. The bearings are of the open
mentioned in section 6. Construction. type permitting the bearings to be relubricated. The
bearings are lubricated by Grundfos prior to delivery.
Pump casing
Seal housings
The cast iron volute pump casing has radial inlet port
and radial outlet port. All LS pumps have two seal housings (124), one at the
drive end and one at the non-drive end of the pump
The pumps are of the in-line (symmetric) design.
shaft.
A seal housing has several functions:
• It supports the pump sealing system, whether it is a
mechanical shaft seal or a stuffing box.

TM04 0476 0708

• It supports the bearing housing, thus transmitting
both radial and axial forces from bearing and shaft
to the upper and lower pump casing.
• It acts as a connection for the flushing pipe.
Fig. 15 Schematic drawing of an in-line LS pump
Impeller
Flange dimensions are in accordance with EN 1092-2 The LS impeller (49) is a closed double-suction
(DIN 2501). impeller. The impeller has inflow of liquid from both
sides and is locked in position by two round nuts

TM03 3891 1106

TM04 0475 0708

Fig. 18 Double-suction impeller

All impellers are dynamically balanced in accordance

with ANSI/ISO 1940 Class G6.3 standard. Due to their
Fig. 16 Upper and lower pump casing of an LS pump design, the impellers are inherently hydraulically
balanced and thus compensate for axial thrust.
Shaft
All impellers are trimmed to the duty point required by
The shaft (51) is of the key and keyway type with one the customer and dynamically balanced together with
key for the impeller (11) and one key for the coupling the shaft.
(11a).
The shaft is supported by bearings at both the drive Wear rings
end and the non-drive end of the pump. LS pumps have wear rings (45) between impeller and
The shaft is made of stainless steel (AISI 420). pump casing.
As the name indicates, the wear rings protect the
pump casing against wear. The wear rings act as a
seal between impeller and pump casing.
When the wear rings become worn, the efficiency of
the pump will be reduced, and the wear rings must be
replaced.
TM04 0477 0708

Fig. 17 LS pump shaft

17
6 LS

Coupling Seal face material

Construction

LS pumps are available with two types of coupling as Carbon/silicon carbide (xBQx)
standard:
Seals with one carbon seal face have the following
• Flexible pin and bush coupling features:
2-pole 4-pole 6-pole • brittle material requiring careful handling
50 Hz ≤ 400 kW ≤ 250 kW ≤ 160 kW • worn by liquids containing solid particles
• good corrosion resistance
• can withstand temporary dry running.
The self-lubricating properties of carbon make the seal
suitable for use even with poor lubricating conditions

TM03 5394 3506

(high temperatures) without generating noise.
However, such conditions will cause wear of the
carbon seal face leading to reduced seal life.

Secondary seal material

Fig. 19 Flexible pin and bush coupling
FKM (xxxV)
• Flexible grid coupling
FKM rubber covers a very wide range of liquids and
2-pole 4-pole 6-pole temperatures and has the following features:
50 Hz > 400 kW > 250 kW > 160 kW • poor mechanical properties at low temperatures
• resistant to water up to 90 °C
• resistant to mineral oils and vegetable oils
• not resistant to alkaline liquids at high temperatures.
EPDM (xxxE)
EPDM rubber covers a wider range of liquids up to a
maximum temperature of 120 °C. EPDM rubber has
TM04 0478 0708

good mechanical properties.

Fig. 20 Flexible grid coupling

Base frame
The pump and the motor are mounted on a common
base frame.

Motor
The motor is a totally enclosed, fan-cooled motor with
main dimensions according to IEC and DIN standards.
Motor efficiency is categorised according to EN 60034-
2-[Link]
• IE2: MMG motors
• IE3: MG, MMG and Siemens motors
• IE4: Siemens motors.
For special motors, please contact Grundfos.

Mechanical shaft seal

LS pumps are supplied with a BBQE shaft seal as
standard.
These shaft seals are available on request:
• BBQV
• BQQE
• BQQV.

18
LS
6
Stuffing boxes

Construction
Stuffing boxes of the SNEK type are available as an
alternative to mechanical shaft seals.
The stuffing box includes graphite-impregnated
packing rings.
The packing rings consist of braided material which is
effective for ensuring a long service life for packing
rings while protecting the shaft (sleeve). When fitted,
the packing rings are symmetrical, having parallel
facings that prevent tilting.

TM04 1849 1108

Fig. 21 Sectional view of a stuffing box with internal

flushing liquid

Pos. Description
1 Shaft sleeve
2 Gland
3 Packing ring
4 Distribution ring
A Drilled hole for flushing liquid (pumped liquid)

Test pressure
Pressure testing is made with water at 20 °C
containing a corrosion inhibitor.
The standard hydrostatic test pressure is 1.5 times
higher than the ’closed valve’ or ’shut off’ pressure.
However, this may vary from one LS pump to another.
See the table below.
Operating pressure Test pressure
Rated pressure
[bar] [MPa] [bar] [MPa]
PN 10 10 1.0 15 1.5
PN 16 16 1.6 24 2.4
PN 25 25 2.5 37 3.7

19
7 LS

7. Operating conditions
Operating conditions

Ambient temperature and altitude Liquid temperatures and shaft

The ambient temperature and the installation altitude seals
are important factors for the motor lifetime, as they
The maximum liquid temperature marked on the pump
affect the life of the bearings and the insulation
nameplate depends on the mechanical shaft seal
system.
used:
If the ambient temperature or the altitude exceeds the
• Temperature range for FKM (BBQV - optional): 0-90
recommended maximum ambient temperature or
°C.
maximum altitude above sea level, the motor must not
be fully loaded due to the low density and • Temperature range for EPDM (BBQE - optional): 0-
consequently low cooling effect of the air. See fig. 22. 120 °C.
In such cases, it may be necessary to use a motor with Minimum temperature of -25 °C can be achieved for
a higher output. certain applications. Contact the factory for specific
information.
Ambient temperature

Motor make Motor P2

Permissible ambient
temperature
Pressure
0.25 - 0.55 kW -20 - +40 °C
MG
0.75 - 22 kW -20 - +60 °C
Maximum operating pressure
Siemens 0.75 - 462 kW -20 - +55 °C
MMG-H2 0.75 - 450 kW -20 - +60 °C
Maximum operating pressure (pressure above
MMG-H3 0.75 - 200 kW -30 - +60 °C
atmospheric pressure)
MMG-G2 0.75 - 630 kW -20 - +60 °C
MMG-G3 0.75 - 315 kW -20 - +60 °C

Maximum motor output in relation to ambient

TM04 0062 4907

Pump pressure
temperature and altitude

Motor make Motor P2 Derating curve

Inlet pressure
0.25 - 0.55 kW curve 1
MG
0.75 - 22 kW curve 2 Fig. 23 Pressures in the pump
Siemens 0.75 - 462 kW curve 3
MMG-H2 0.75 - 450 kW Fig. 22 curve 2 The inlet pressure + the pump pressure must be lower
MMG-H3 0.75 - 200 kW curve 2 than the maximum operating pressure (p) stated on the
MMG-G2 0.75 - 630 kW curve 2 pump nameplate. The maximum operating pressure
MMG-G3 0.75 - 315 kW curve 2
can be checked by closing the outlet valve briefly
(maximum 30 seconds).
P2
[%] 3
Minimum inlet pressure
100 2
90 The minimum inlet pressure must be according to the
80 1 NPSH curve + correction for vapour pressure + a
70 safety margin of minimum 0.5 metres head. We do,
60 however, recommend that you calculate the inlet
TM04 4914 2209

50 pressure in these cases:

20 25 30 35 40 45 50 55 60 65 70 75 80 • the liquid temperature is high
t [°C] • the flow rate is considerably higher than the pump's
1000 2250 3500 4750 m rated flow rate
Fig. 22 Relationship between motor output (P2) and • the pump is operating in an open system with
ambient temperature suction lift
Example • the liquid is sucked through long pipes
• the inlet conditions are poor
Figure 22 shows that an MG IE3 motor must not be
loaded by more than 89 % of the rated output at an • the operating pressure is low.
ambient temperature of 70 °C. If the pump is installed
4750 metres above sea level, the motor must not be Maximum inlet pressure
loaded by more than 89 % of the rated output. In cases The inlet pressure + the pump pressure must be lower
where both the maximum temperature and the than the maximum operating pressure (p) stated on the
maximum altitude are exceeded, the derating factors pump nameplate. The maximum operating pressure
must be multiplied (0.89 x 0.89 = 0.79). can be checked by closing the outlet valve briefly
(maximum 30 seconds).

20
LS
7
Flow rate Maximum particle size

Operating conditions
Minimum flow rate The table shows the maximum free passage through
the impeller.
The pump must not run against a closed outlet valve,
as this will cause an increase in temperature or Maximum free passage through the
Pump type
formation of steam in the pump. This may cause shaft impeller [mm]
damage, impeller erosion, short life of bearings, LS 65-50-241 4.8
stuffing boxes with packing rings or mechanical seals LS 65-50-330 4.1
due to stress or vibration. LS 100-80-241 7.9
LS 100-80-356 7.9
The minimum, continuous flow rate must be at least 25
LS 125-100-279 9.7
% of the flow rate at best-efficiency point (BEP). LS 125-100-305 19.1
Maximum flow rate LS 125-100-381 6.4
LS 125-100-388 6.4
The maximum flow rate must not be exceeded as LS 150-125-305 16.0
otherwise there is a risk of, for instance, cavitation and LS 150-125-381 19.1
overload. LS 200-150-305 25.4
You can read the maximum flow rate either from the LS 200-150-381 20.6
performance curve pages or from a curve on a specific LS 200-150-483 19.1
pump when selecting it in Grundfos Product Center. LS 200-150-508 19.1
LS 250-200-305 22.4
H /S 100-80-24/241, 50Hz eta LS 250-200-381 25.4
[m] [%]
Pumped liquid = Water LS 300-200-489 26.2
Liquid temperature = 20 °C
Density = 998.2 kg/m³ LS 300-250-305 25.4
90 LS 300-250-381 31.8
LS 350-250-498 30.5
80
LS 350-250-630 29.7
70 LS 350-300-508 47.5
LS 400-350-397 47.5
60 Minimum flow rate
LS 450-350-397 47.5
50 100 LS 125-100-370x2 14.2
LS 150-125-415x2 14.2
Maximum flow rate
40 80
LS 200-150-475x2 17.3
30 60
LS 250-200-575x2 22.9
TM07 2826 4218

20 40

10 20

0 0
0 20 40 60 80 100 120 140 160 180 200 Q [m³/h]

Fig. 24 Example from Grundfos Product Center showing

minimum and maximum flow rate

21
8 LS

8. Installation
Installation

Reference Location
Please read this section on installation of LS pumps as Install the pump as close as possible to the supply of
an overview of the installation requirements to be pumped liquid and with the shortest and most direct
fulfilled. inlet pipe practical.
For full details on foundation, mechanical installation, Install the pump with sufficient accessibility for
alignment, pipes, electrical installation, etc., please inspection and maintenance. Allow ample space and
refer to the installation and operating instructions for headroom for the use of an overhead crane or hoist
the LS pumps. Installation and operating instructions sufficiently strong to lift the unit.
can be downloaded from the literature section of
Grundfos Product Center, or you may contact your
local Grundfos company.

Mechanical installation
Vibration dampers
A specific application may call for vibration dampers to

TM04 0382 4715

prevent pump vibrations from being transmitted to the
building or the pipes. In order to select the right
vibration damper, you need this information:
• forces transferred through the damper
• motor speed. In case of speed control, this must Fig. 25 LS pump with accessibility for inspection and
also be taken into account headroom for the use of an overhead crane
• desired dampening in % (recommended value is 70
%).
Foundation
The selection of vibration damper differs from We recommend that you install the pump on a
installation to installation. In certain cases a wrong concrete foundation which is heavy enough to provide
damper may increase the vibration level. Vibration permanent and rigid support for the entire pump. The
dampers must therefore be sized by the supplier of the foundation must be capable of absorbing any vibration,
vibration dampers. normal strain or shock. We recommend that the weight
of the concrete foundation is three times the weight of
Expansion joints the complete pump unit. For specific requirements,
please consult the contractor or the engineer, or
Expansion joints provide these advantages:
comply with established industry standards.
• absorption of thermal expansion and contraction of
In installations where silent operation is particularly
pipes caused by variations in liquid temperature
important, we recommend a foundation with a mass up
• reduction of mechanical influences in connection to five times that of the complete pump unit.
with pressure surges in the pipes
• isolation of structure-borne noise in the pipes (only
rubber bellows expansion joints).
Note: Do not use expansion joints to adjust for
inaccuracy in the pipes, for instance centre
displacement or misalignment of flanges.
The expansion joints must be fitted at a minimum
distance of two pipe diameters (DN) away from the
pump flange on the inlet side. This prevents turbulence
in the joints, thus ensuring optimum inlet conditions.
At flow velocities > 2.4 m/s, we recommend that you fit
larger expansion joints matching the pipes.
For pipe sizes above DN 100, we recommend that you
use restrained expansion joints to restrict the spring
force of the joint itself.

22
LS
8
Grouting Pipes

Installation
Inlet and outlet pipe
Base frame
In order to minimise friction losses and hydraulic noise
Grout in the pipes, choose pipes that are one or two sizes

5-10 mm
larger than the pump inlet and outlet ports. Typically,
flow velocities must not exceed 2 m/s (6 ft/sec) for the
inlet pipe (port) and 3 m/s (9 ft/sec) for the outlet pipe
(port).
Levelling wedges or
Make sure that the NPSH available (NPSHA) is higher

TM04 0384 0608

19 to 32 mm shims left in place
grout than the NPSH required (NPSHR). NPSH = Net
Top of foundation Positive Suction Head.
Formwork (rough)
General precautions
Fig. 26 Sectional view of foundation with anchor bolt, When installing the pipes, observe these precautions:
grouting and base frame • Always run the pipes direct to the pump.
Note: Make sure that both inlet and outlet pipes are
Grouting compensates for uneven foundation,
independently supported near the pump so that no
distributes the weight of the unit, dampens vibrations
strain is transmitted to the pump when the flange
and prevents shifting. Use an approved, non-shrinking
bolts are tightened. Use pipe hangers or other
grout. If you have questions or doubts about the
supports with necessary spacing to provide support.
grouting, please contact an expert on grouting.
• When expansion joints are used in the pipe system,
fit the joints at a minimum distance of two pipe
Measuring instruments diameters away from the pump on the inlet side.
To ensure continuous monitoring of operation, we This prevents turbulence in the joints, thus ensuring
recommend that you install pressure gauges on the optimum suction conditions.
pump inlet and outlet flanges. The pressure gauge on • Install pipes as straight as possible and avoid
the inlet side must be capable of measuring vacuum. unnecessary bends. Where necessary, use 45 ° or
The pressure gauge tappings should only be opened long sweep 90 ° fittings to reduce friction loss.
for test purposes. The measuring range of the outlet • Where flanged joints are used, ensure that inside
side pressure gauge must be 20 % above the diameters match properly.
maximum pump outlet pressure. • Provide for expansion of pipe material by means of
When measuring with pressure gauges on the pump expansion joints on both sides of the pump.
flanges, please note that a pressure gauge does not • Always allow sufficient space/accessibility for
register dynamic pressure (velocity pressure). On LS maintenance and inspection.
pumps, the diameters of the inlet and outlet flanges
are different, which results in different flow velocities in
the two flanges. Consequently, the pressure gauge on
the outlet flange will not show the pressure stated in
the technical documentation, but a value which may be
lower.

23
8 LS

Inlet pipes Flooded systems

Installation

Note: The sizing and installation of the inlet pipes is (Closed systems and open systems where the liquid
extremely important. level is above the pump inlet).
Locate the pump below system level whenever
Correct
possible. This will facilitate priming, assure a steady
liquid flow and provide a positive suction head. Eccentric reducer
Many NPSH problems can be avoided if the inlet pipes
are properly installed.

TM04 0148 4907

System types
These pumps can be installed in two types of system:
Pipe sloping down towards pump
1. Closed systems or open systems where the liquid
level is above the pump inlet (flooded systems), Fig. 29 Correctly mounted inlet pipe
meaning that a positive1) inlet pressure will be
Suction lift systems
available.
(Open systems where the liquid level is below the
2. Open systems where the liquid level is below the
pump inlet).
pump inlet (suction lift), meaning that a negative 1)
inlet pressure will be available. Install the inlet pipe sloping upwards towards the inlet
1) Positive or negative inlet pressure in relation to ambient port. Any high point in the pipe will be filled with air and
atmospheric pressure. thus prevent proper operation of the pump. When
General inlet pipe guidelines reducing the pipes to the inlet port diameter, use an
eccentric reducer with the eccentric side down to avoid
Avoid air pockets or turbulence in the inlet pipe. Never air pockets
use reducers in a horizontal inlet pipe as shown in fig.
28. Instead, use an eccentric reducer as illustrated in Correct
fig. 27.

Correct

TM04 0098 4907

Pipe sloping up
towards pump
TM04 0093 4907

Eccentric reducer

Fig. 30 Correctly mounted inlet pipe

Eccentric reducer Wrong

Fig. 27 Correctly mounted reducer Air pocket

TM04 0097 4907

Wrong

Air pocket Pipe sloping down

towards pump
Eccentric reducer

Fig. 31 Inlet pipe resulting in air pockets

Concentric reducer
TM04 0092 4907

Turbulent flow

Fig. 28 Reducers resulting in air pockets and turbulence

24
LS
8
Inlet pipes if the feed line comes in different

Installation
Correct
horizontal planes
Avoid high spots, such as loops, as they will collect air Open system

and throttle the system or lead to uneven pumping.

Correct

10 x DN
DN

TM04 0095 4907

 10 x DN plus
expansion joint

Eccentric reducer

Fig. 32 Correctly mounted inlet pipe

Closed system
Wrong

Air pocket

TM04 0150 4907 - TM07 2908 4418

 [ DN
TM04 0094 4907

DN
3-5 x DN plus
expansion joint

Eccentric reducer

Fig. 33 Inlet pipe resulting in air pockets

Installations with vertical inlet pipe in confined Fig. 35 Recommended inlet pipe installation with a
space length of straight pipe between horizontal elbow
and pump

Wrong
TM04 0096 4907

Water pressure

TM04 0149 4907

increases here causing
a greater flow to one
side of the impeller
than to the other
Fig. 34 Suction diffuser (1) in the inlet pipe Uneven flow

Inlet pipe with a horizontal elbow in the feed line Fig. 36 Unbalanced loading of a double-suction impeller
due to uneven flow through a horizontal elbow
Make sure that the liquid flow is evenly distributed to
close to the pump
both sides of the double-suction impellers.
There is always an uneven, turbulent flow through an Valves in inlet pipes
elbow. See fig. 36. If an elbow is installed in the inlet If the pump is operating under static suction lift
pipe near the pump in a position other than vertical, conditions, install a non-return valve in the inlet pipe to
more liquid will enter one side of the impeller than the avoid having to prime the pump each time it is started.
other. This will result in heavy, unbalanced thrust loads The non-return valve must be of the flap type or a foot-
overheating the bearings, causing rapid wear and valve with a minimum of pressure loss.
reducing the hydraulic performance.

25
8 LS

Outlet pipes
Installation

The outlet pipe is usually preceded by a non-return

valve and an outlet isolating or throttle valve. The non-
return valve protects the pump against excessive
back-pressure and reverse rotation of the pump and
prevents back flow through the pump in case of
operational stop or failure of the motor.
In order to minimise friction losses and hydraulic noise
in the pipes, flow velocities must not exceed 3 m/s (9
ft/sec) in the outlet pipe (port).
On long horizontal runs, it is desirable to keep the
pipes as level as possible.
Avoid high spots, such as loops, as they will collect air
and throttle the system or lead to uneven pumping.

Auxiliary pipes
1. Drains
Install drain pipes from pump casing and stuffing
boxes to a convenient disposal point.
2. Pumps fitted with stuffing boxes
When inlet pressure is below ambient pressure,
supply the stuffing boxes with liquid to provide
lubrication and prevent the ingress of air. This is
normally achieved via a flushing pipe from the
pump outlet side to the stuffing box. You may fit a
control valve or orifice plate in the flushing pipe to
control the pressure to the packing gland/stuffing
box.
If the pumped liquid is dirty and cannot be used for
flushing the seals, we recommend a separate
clean, compatible liquid supply to the stuffing box at
1 bar (15 psi) above the inlet pressure.
3. Pumps fitted with mechanical seals
Seals requiring re-circulation will normally be
provided with a flushing pipe from the pump casing.
Note: When pumping hot liquids, we recommend
that the supply of any external flushing or cooling
liquid is continued after stopping the pump. This
must be done to avoid seal damage.

26
LS
9

9. Selection of product

Selection of product
Pump size Flow rate margin

Selection of pump size must be based on the following H

[m]
data: /S 300-250-305
40 ISO 9906 Grade 2
• required flow rate and pressure
• pressure loss as a result of height differences 36
/304.8 Duty point
(geometric lifting height) 32 + 10 %
• friction loss in the pipes (pipes, bends, valves, etc.) /281.3 + 20 %
28
• best efficiency at the estimated duty point. + 30 %
24 /257.8

Efficiency 20 /234.3
Max. flow rate
If you expect the pump to always operate in the same 16 /210.8 margin
NPSH
duty point, select a pump which is operating in a duty [m]
12 12
point corresponding to the best efficiency of the pump.
In case of varying consumption, select a pump whose 8 8

best efficiency falls within the duty range covering the 4 NPSH 4
greater part of the duty time.

TM07 2823 4218

0 0
0 200 400 600 800 1000 Q [m³/h]
Material
Flow rate margins
The material variant must be selected on the basis of
the liquid to be pumped. Fig. 37 Selection of a flow rate margin on the basis of
conditions around the primary duty point and
uncertainties in system calculations
Motor size
2. Establish P2 for the selected flow rate margin.
The selection of motor size must be based on these
parameters: Establishing P2
• flow rate margin, the maximum required flow rate in H
your application [m]
/S 300-250-305
• motor safety margin. 40 ISO 9906 Grade 2

A selection has to be made for both parameters. 36

/304.8 Duty point
Parameter 1 - flow rate margin in your application 32 + 10 %
Understanding the operating conditions under which /281.3 + 20 %
28
your pump will run is important to ensure long life and + 30 %
trouble-free operation of both pump and motor. The 24 /257.8

more specific these parameters are understood, the /234.3

20
more refined and specific your motor selection can be. Max. flow rate
/210.8 margin
If you intend to run the pump in one specific duty point, 16 NPSH
[m]
the power absorbed in this point (P2) could in theory 12 12
be your motor's rated power. However, because of the
uncertainties in system calculations or the addition of 8 8

duty conditions around the primary duty point, we 4 NPSH 4

recommend that you have a safety margin for P2
power. 0 0

P2 0 200 400 600 800 1000 Q [m³/h]

To accomplish this, we recommend the following [kW]
Eta
[%]
method for motor selection. 80
P2 for + 30 %
80
1. Select one of the following flow rate margins for 60 /304.8 60
TM07 2824 4218

your pump: 40
/281.3
40
/257.8
– Duty point to the end of the actual curve (default 20 /234.3 20
/210.8
in CAPS) 0 0
– Duty point + 30 % 0 200 400 600 800 1000 Q [m³/h]

– Duty point + 20 % Fig. 38 Establishing P2 for a selected flow rate margin of

– Duty point + 10 %. 30 %

27
9 LS

In some cases, however, the input power actually Method 1

Selection of product

decreases as the flow rate increases. It will thus be Add a safety margin as outlined in ISO 5199 to the
found at some other point within this flow range. This is maximum P2 found when determining parameter 1.
typically the case when the impeller is trimmed to the
(Grundfos recommends the addition of a safety margin
smallest diameter.
in accordance with this standard; default in Grundfos
Decrease of P2 with increase of flow rate Product Center.)

H Required pump power up to Motor power

[m] [kW] P2 [kW]
/S 300-250-305
40 ISO 9906 Grade 2 568 630
505 560
36 450 500
/304.8
405 450
32
360 400
/281.3
28 320 355
284 315
/257.8
24 225 250
180 200
20 /234.3
144 160
16 /210.8 119 132
NPSH
[m] 99 110
12 12 81 90
68 75
8 8 49 55
Duty point
40 45
4 NPSH Max. flow rate margin
4
32.5 37
0 0 26 30
19 22
P2 0 200 400 600 800 1000 Q [m³/h] Eta
[kW] [%] 15.9 18.5
80 80 12.8 15
9.1 11
60 /304.8 60
/281.3 6.1 7.5
TM07 2825 4218

40 40
/257.8 4.3 5.5
/234.3
20
/210.8
20 3.2 4
0 P2 max 0 2.3 3
0 200 400 600 800 1000 Q [m³/h] 1.7 2.2
1.1 1.5
Fig. 39 Establishing the maximum P2 when P2 decreases
as the flow rate increases Fig. 40 Safety margins according to ISO 5199

Parameter 2 - motor safety margin Method 2

As with any system, where uncertainties and Add a 5 % safety margin to the maximum P2 found
tolerances exist, the motor safety margin takes the when determining parameter 1.
following into account: If not specified by the customer, the motor size is
• The actual head is at the high end of the tolerance determined in accordance with the Grundfos Product
described in ISO 9906. This will increase the Center defaults listed above. This means a motor
required P2. which covers the full performance range and with a
motor safety margin according to ISO 5199.
• Pump efficiency is at the low end of the tolerance
described in ISO 9906. This will increase the
required P2.
• Motor efficiency is at the low end.
To establish the motor safety margin, select method 1
or alternatively method 2:

28
LS
9
Pumped liquids

Selection of product
We recommend LS pumps for thin, clean and non-
aggressive, non-explosive liquids, not containing solid
particles or fibres. The liquid must not attack the pump
materials chemically or mechanically.
The mechanical shaft seal must be suitable for the
liquid.
Water in heating and ventilating systems often
contains additives to prevent negative effects such as
system corrosion or calcareous deposits. If you want to
use the pump for such liquids and if the temperature is
above 80 °C, use special shaft seals to avoid
crystallisation/precipitation between the seal faces.

Liquid density and viscosity

If you pump liquids with a density and/or viscosity
higher than that of water, use motors with
correspondingly higher outputs.
The effect of high density on centrifugal pump
performance
A high-density liquid only affects the power
consumption of a centrifugal pump:
• The head, flow rate and pump efficiency will remain
unchanged.
• The power consumption will increase at a ratio
corresponding to the increase in density. A liquid
with a specific gravity of 1.2 will thus require a 20 %
larger power input.
• An oversize motor will often be required.
Grundfos Product Center can help you select the right
pump for liquids with a density different from that of
water.
The effect of high viscosity on centrifugal pump
performance
A high-viscosity liquid affects a centrifugal pump in
several ways:
• The power consumption will be increased, i.e. a
larger motor is required.
• Head, flow rate and pump efficiency will be reduced.
Grundfos Product Center can help you select the right
pump for liquids with a viscosity different from that of
water.

29
10 LS

10. Performance tests

Performance tests

The requested duty point for every split-case pump is

tested according to ISO 9906, Grade 2B, and without
certification, and no test report is supplied with the
pump.
In case of pumps ordered on the basis of impeller
diameter only (no requested duty point), the pump will
be tested at the best efficiency point.
The primary duty point is guaranteed by a certified
performance test. Additional point(s), on request, are
offered for reference only. A testing certificate has to
be ordered separately.

Certificates
Certificates have to be confirmed for every order and
are available on request as follows:
• certificate of compliance with the order (EN
10204-2.1)
• pump test sheet.

Witness test
When the pumps are being tested or are tested with a
certification, it is possible for the customer to witness
the testing procedure according to ISO 9906.
If the customer wants to witness the testing of the
pump performance, place this request on the order.

30
LS
11

11. Introduction to performance curves and technical data

Introduction to performance curves and technical data

How to read the curve charts
Total pump head Size of impeller
H = Htotal Pump type and speed
H
[m]
36 LS 250-200-305C
/304.8
50 Hz, n = 1490 min-1
34
ISO 9906 Grade 2B
32
QH curve for the
30 individual pump.
/279.4 The bold curve indicates
28 the recommended
performance range
26

24 /254.0

22

20
/228.6
18

16
/203.2
The NPSH curves1).
When sizing the pumps,
14 add a safety margin of at
least 0.5 m
12

10
NPSH
8
[m]
6 15
/203.2 /228.6
/254.0
4 /279.4 10
/304.8
2 5

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]
P2 Eta
[kW] [%]
90 90 The eta curves show
the efficiency of the
80 /304.8 80
/279.4
pumps shown
70 /254.0 70
/228.6
/203.2
60 60

50 /304.8 50

40 40
/279.4 The power curves
30 30 indicate pump input
/254.0 power [P2] for the

TM07 2645 4018

20
/228.6
20 pumps shown
/203.2
10 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]
1)
For NPSH of other impellers, please contact Grundfos.

31
11 LS

Curve conditions
Introduction to performance curves and technical data

The guidelines below apply to the curves shown in the

performance charts on pages 32 to 105.
• Tolerances according to ISO 9906, Grade 2B.
• The curves show pump performance with different
impeller diameters at the nominal speed.
• The bold part of the curves show the
recommended operating range.
• Do not operate the pump along the thin parts of the
curves. If your duty point lies here, you must select
a smaller or larger pump type.
• The curves apply to the pumping of airless water at
a temperature of 20 °C and a kinematic viscosity of
1 mm2/s (1 cSt).
• ETA: The lines show values of the hydraulic
efficiency of the pump for the different impeller
diameters.
• NPSH: The curves show average values measured
under the same conditions as the performance
curves.
When sizing the pump, add a safety margin of at
least 0.5 m.
• In case of densities other than 1000 kg/m3, the
outlet pressure is proportional to the density.
• When pumping liquids with a density higher than
1000 kg/m3, motors with correspondingly higher
outputs must be used.
Calculation of total head
The total pump head consists of the height difference
between the measuring points + the differential head +
the dynamic head.

Htotal = Hgeo + Hstat + Hdyn

Hgeo Height difference between measuring points.

Differential head between the inlet and the outlet side of the
Hstat
pump.
Calculated values based on the velocity of the pumped
Hdyn
liquid on the inlet and the outlet side of the pump.

32
 12

Performance curves and technical data

12. Performance curves and technical data
Overview
2-pole 4-pole 6-pole

Pump type See page Pump type See page Pump type See page
LS 65-50-241 34 LS 65-50-241 42 LS 150-125-381 92
LS 100-80-241 36 LS 65-50-330 44 LS 200-150-305 93
LS 125-100-279 38 LS 100-80-241 46 LS 200-150-381 94
LS 125-100-305 40 LS 100-80-356 48 LS 250-200-305 95
LS 125-100-279 50 LS 200-150-483 96
LS 125-100-305 52 LS 200-150-508 98
LS 125-100-381 54 LS 250-200-381 100
LS 150-125-305 56 LS 300-200-489 102
LS 150-125-381 58 LS 300-250-305 104
LS 200-150-305 60 LS 300-250-381 106
LS 200-150-381 62 LS 350-250-498 108
LS 200-150-483 64 LS 350-250-630 110
LS 200-150-508 66 LS 350-300-508 112
LS 250-200-305 68 LS 450-350-397 114
LS 250-200-381 70 LS 200-150-475x2 116
LS 300-200-489 72 LS 250-200-575x2 118
LS 300-250-305 74
LS 300-250-381 76
LS 350-250-498 78
LS 350-250-630 80
LS 450-350-397 82
LS 125-100-370x2 84
LS 150-125-415x2 86
LS 200-150-475x2 88
LS 250-200-575x2 90

33
12
Performance curves and technical data

2-pole
LS 65-50-241

H
[m]
100 LS 65-50-241B
95 50 Hz, n = 2940 min-1
ISO 9906 Grade 2B
90 /241.0
85

80

75

70
/213.0
65

60

55

50 /185.0

45
/171.0
40

35

30

25
NPSH
20
[m]
15 12

10 8
/171.0, /185.0, /213.0, /241.0
5 4

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 Q [m³/h]
P2 Eta
[kW] [%]
35 /241.0 70
/213.0
/185.0
30 /171.0 60

25 50

/241.0
20 40

15 /213.0 30

10 /185.0 20
/171.0
TM07 2689 4018

5 10

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 Q [m³/h]

34
 12

Performance curves and technical data

LS 65-50-241 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 65-50-241 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
11 160MB MG 2 510 545 305 24 216 216 209 209 270 581 534 42 3
15 160MD MG 2 510 545 305 24 216 216 209 209 270 581 534 42 3
18.5 160LB MG 2 510 545 305 24 216 216 209 209 270 625 534 42 3
22 180MB MG 2 510 545 305 24 216 216 214 214 270 651 589 48 4
30 200L Siemens 2 510 545 305 24 216 216 234 234 270 769 638 55 4
37 200L Siemens 2 510 545 305 24 216 216 234 234 270 769 638 55 4
45 225M Siemens 2 510 545 305 24 216 216 259 259 270 819 686 55 4
11 160MA MMG-G 2 510 545 305 24 216 216 209 209 270 608 539 42 3
15 160MB MMG-G 2 510 545 305 24 216 216 209 209 270 608 539 42 3
18.5 160L MMG-G 2 510 545 305 24 216 216 209 209 270 652 539 42 3
22 180M MMG-G 2 510 545 305 24 216 216 214 214 270 672 570 48 4
30 200LA MMG-G 2 510 545 305 24 216 216 234 234 270 770 655 55 4
37 200LB MMG-G 2 510 545 305 24 216 216 234 234 270 770 655 55 4
45 225MA MMG-G 2 510 545 305 24 216 216 259 259 270 811 706 55 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
11 160MB MG 2 1120 200 10 - 390 360 8.5 4 18 - 30 9 73 86 222 0.54
15 160MD MG 2 1120 200 10 - 390 360 8.5 4 18 - 30 9 73 98 234 0.54
18.5 160LB MG 2 1120 200 10 - 390 360 8.5 4 18 - 30 69 73 111 247 0.57
22 180MB MG 2 1180 200 18 390 420 376 8.5 6 18 - 22 30 73 126 266 0.62
30 200L Siemens 2 1230 200 20 415 450 406 8.5 6 18 - 20 35 73 185 328 0.69
37 200L Siemens 2 1230 200 20 415 450 406 8.5 6 18 - 20 35 73 214 357 0.69
45 225M Siemens 2 1250 200 20 425 480 436 8.5 6 18 - 20 112 73 330 477 0.79
11 160MA MMG-G 2 1120 200 10 - 390 360 8.5 4 18 - 30 6 73 130 203 0.830
15 160MB MMG-G 2 1120 200 10 - 390 360 8.5 4 18 - 30 6 73 130 203 0.830
18.5 160L MMG-G 2 1120 200 10 - 390 360 8.5 4 18 - 30 50 73 140 213 0.859
22 180M MMG-G 2 1180 200 18 390 420 376 8.5 6 18 - 22 19 73 180 253 0.908
30 200LA MMG-G 2 1230 200 20 415 450 406 8.5 6 18 - 20 69 73 265 338 1.092
37 200LB MMG-G 2 1230 200 20 415 450 406 8.5 6 18 - 20 69 73 300 373 1.092
45 225MA MMG-G 2 1250 200 20 425 480 436 8.5 6 18 - 20 90 73 340 413 1.227

35
12
Performance curves and technical data

LS 100-80-241
H
[m]
95 LS 100-80-241E
90 50 Hz, n = 2965 min-1
/241.3
ISO 9906 Grade 2B
85

80

75

70 /216.0

65

60

55 /190.5

50

45
/165.0
40

35
NPSH
30
[m]
25 /241.3 10

20 /216.0 8
/190.5
15 6
/165.0
10 4

5 2

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
P2 Eta
[kW] [%]
80 /216.0 80
/241.3
70 /190.5 70
/165.0
60 60

50 50
/241.3
40 40

30 /216.0 30

20 /190.5 20
/165.0
TM07 2626 4018

10 10

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]

36
 12

Performance curves and technical data

LS 100-80-241 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 100-80-241 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
15 160MD MG 2 510 545 305 24 279 279 222 222 290 581 560 42 3
18.5 160LB MG 2 510 545 305 24 279 279 222 222 290 625 560 42 3
22 180MB MG 2 510 545 305 24 279 279 222 222 290 651 609 48 4
30 200L Siemens 2 510 545 305 24 279 279 222 222 290 769 638 55 4
37 200L Siemens 2 510 545 305 24 279 279 222 222 290 769 638 55 4
45 225M Siemens 2 510 545 305 24 279 279 246 246 290 819 686 55 4
55 250M Siemens 2 510 545 305 24 279 279 271 271 290 887 783 60 4
75 280S Siemens 2 510 545 305 24 279 279 316 316 290 960 851 65 4
15 160MB MMG-G 2 510 545 305 24 279 279 222 222 290 608 564 42 3
18.5 160L MMG-G 2 510 545 305 24 279 279 222 222 290 652 564 42 3
22 180M MMG-G 2 510 545 305 24 279 279 222 222 290 672 590 48 4
30 200LA MMG-G 2 510 545 305 24 279 279 222 222 290 770 655 55 4
37 200LB MMG-G 2 510 545 305 24 279 279 222 222 290 770 655 55 4
45 225MA MMG-G 2 510 545 305 24 279 279 247 247 290 811 706 55 4
55 250MA MMG-G 2 510 545 305 24 279 279 272 272 290 921 773 60 4
75 280SA MMG-G 2 510 545 305 24 279 279 317 317 290 1037.5 851 65 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
15 160MD MG 2 1130 200 20 365 390 346 8.5 6 18 - 20 9 80 98 241 0.68
18.5 160LB MG 2 1130 200 20 365 390 346 8.5 6 18 - 20 69 80 111 254 0.71
22 180MB MG 2 1150 200 20 375 390 346 8.5 6 18 - 20 62 80 126 270 0.77
30 200L Siemens 2 1230 200 20 - 460 425 8.5 4 18 - 20 35 80 185 343 0.83
37 200L Siemens 2 1230 200 20 - 460 425 8.5 4 18 - 20 35 80 214 372 0.83
45 225M Siemens 2 1230 200 20 415 480 436 8.5 6 18 - 20 132 80 330 480 0.94
55 250M Siemens 2 1350 200 20 475 550 506 8.5 6 18 - 20 90 80 420 588 1.11
75 280S Siemens 2 1450 200 20 525 640 600 9 6 23 - 20 63 80 530 725 1.25
15 160M MMG-G 2 1130 200 20 365 390 346 8.5 6 18 - 20 6 80 130 210 1.008
18.5 160L MMG-G 2 1130 200 20 365 390 346 8.5 6 18 - 20 50 80 140 220 1.043
22 180MA MMG-G 2 1150 200 20 375 390 346 8.5 6 18 - 20 51 80 180 260 1.089
30 200LA MMG-G 2 1230 200 20 - 460 425 8.5 4 18 - 20 69 80 265 345 1.249
37 200LA MMG-G 2 1230 200 20 - 460 425 8.5 4 18 - 20 69 80 300 380 1.249
45 225MA MMG-G 2 1230 200 20 415 480 436 8.5 6 18 - 20 110 80 340 420 1.350
55 250SA MMG-G 2 1350 200 20 475 550 506 8.5 6 18 - 20 100 80 465 545 1.541
75 250MA MMG-G 2 1450 200 20 525 640 600 9 6 23 - 20 116 80 553 633 1.937

37
12
Performance curves and technical data

LS 125-100-279

H
[m]
LS 125-100-279E
120
50 Hz, n = 2970 min-1
ISO 9906 Grade 2B
110
/279.4

100

90

80

70
/229.0

60

50

40
NPSH
[m]
30 12
/229.0
/279.4
20 8

10 4

0 0
0 20 40 60 80 100 120 140 160 180 200 Q [m³/h]
P2 Eta
[kW] [%]
160 /229.0 80
/279.4
140 70

120 60

100 50

80 40
/279.4
60 30

40 20
/229.0
TM07 2629 4018

20 10

0 0
0 20 40 60 80 100 120 140 160 180 200 Q [m³/h]

38
 12

Performance curves and technical data

LS 125-100-279 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-279 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
18.5 160LB MG 2 510 545 368 34 305 305 244 244 290 625 634 42 3
22 180MB MG 2 510 545 368 34 305 305 244 244 290 651 663 48 4
30 200L Siemens 2 510 545 368 34 305 305 244 244 290 769 692 55 4
37 200L Siemens 2 510 545 368 34 305 305 244 244 290 769 692 55 4
45 225M Siemens 2 510 545 368 34 305 305 244 244 290 819 715 55 4
55 250M Siemens 2 510 545 368 34 305 305 264 264 290 887 807 60 4
75 280S Siemens 2 510 545 368 34 305 305 290 290 290 960 856 65 4
18.5 160L MMG-G 2 631 674 368 34 305 305 244 244 370 652 618 42 3
22 180M MMG-G 2 631 674 368 34 305 305 244 244 370 672 644 48 4
30 200LA MMG-G 2 631 674 368 34 305 305 244 244 370 770 709 55 4
37 200LB MMG-G 2 631 674 368 34 305 305 244 244 370 770 709 55 4
45 225MA MMG-G 2 631 674 368 34 305 305 244 244 370 811 735 55 4
55 250MA MMG-G 2 631 674 368 34 305 305 264 264 370 921 797 60 4
75 280SA MMG-G 2 631 674 368 34 305 305 290 290 370 1037.5 856 65 4
90 280MA MMG-G 2 631 674 368 34 305 305 290 290 370 1037.5 856 65 30

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
18.5 160LB MG 2 1250 200 50 425 334 286 9 6 18 13 56 45 164 126 354 0.94
22 180MB MG 2 1280 200 50 440 390 346 8.5 6 18 13 56 28 164 185 422 0.99
30 200L Siemens 2 1320 200 51 460 435 394 8.5 6 23 13 56 41 164 214 461 1.04
37 200L Siemens 2 1320 200 51 460 435 394 8.5 6 23 13 56 41 164 330 577 1.06
45 225M Siemens 2 1350 200 51 - 485 446 8.5 4 23 13 56 108 164 420 659 1.20
55 250M Siemens 2 1450 200 51 525 560 526 9 6 23 13 56 86 164 530 799 1.39
75 280S Siemens 2 1550 200 51 575 610 570 9 6 23 13 56 59 164 615 891 1.44
18.5 160L MMG-G 2 1250 200 50 425 334 286 9 6 18 13 56 23 164 140 304 1.264
22 180M MMG-G 2 1280 200 50 440 390 346 8.5 6 18 13 56 14 164 180 344 1.317
30 200LA MMG-G 2 1320 200 51 460 435 394 8.5 6 23 13 56 72 164 265 429 1.498
37 200LB MMG-G 2 1320 200 51 460 435 394 8.5 6 23 13 56 72 164 300 464 1.498
45 225MA MMG-G 2 1350 200 51 - 485 446 8.5 4 23 13 56 83 164 340 504 1.576
55 250MA MMG-G 2 1450 200 51 525 560 526 9 6 23 13 56 93 164 465 629 1.780
75 280SA MMG-G 2 1550 200 51 575 610 570 9 6 23 13 56 110 164 553 717 2.000
90 280MA MMG-G 2 1550 200 47 575 600 550 8 6 18 16 59 133 164 620 784 2.029

39
12
Performance curves and technical data

LS 125-100-305

H
[m]
150
LS 125-100-305F
/304.8 50 Hz, n = 2975 min-1
140 ISO 9906 Grade 2B

130

120

/279.4
110

100
/254.0

90

80 /228.6

70

60 /203.2

50

40

30 NPSH
[m]
20 /254.0 /279.4 /304.8 10
/203.2 /228.6

10 5

0 0
0 40 80 120 160 200 240 280 320 360 Q [m³/h]
P2 Eta
[kW] [%]
160 /304.8 80
/279.4
140 /228.6 /254.0 /304.8 70
/203.2
120 60
/279.4
100 50

80 /254.0 40
/228.6
60 30

40 /203.2 20
TM07 2631 4018

20 10

0 0
0 40 80 120 160 200 240 280 320 360 Q [m³/h]

40
 12

Performance curves and technical data

LS 125-100-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
30 200L Siemens 2 631 674 368 34 305 305 244 244 370 769 692 55 4
37 200L Siemens 2 631 674 368 34 305 305 244 244 370 769 692 55 4
45 225M Siemens 2 631 674 368 34 305 305 244 244 370 819 715 55 4
55 250M Siemens 2 631 674 368 34 305 305 264 264 370 887 807 60 4
75 280S Siemens 2 631 674 368 34 305 305 290 290 370 960 856 65 4
90 280M Siemens 2 631 674 368 34 305 305 290 290 370 1070 856 65 4
110 315S Siemens 2 631 674 368 34 305 305 325 325 370 1052 970 65 4
132 315M Siemens 2 631 674 368 34 305 305 325 325 370 1217 970 65 4
160 315L Siemens 2 631 674 368 34 305 305 325 325 370 1217 970 65 4
30 200LA MMG-G 2 631 674 368 34 305 305 244 244 370 770 709 55 4
37 200LB MMG-G 2 631 674 368 34 305 305 244 244 370 770 709 55 4
45 225MA MMG-G 2 631 674 368 34 305 305 244 244 370 811 735 55 4
55 250MA MMG-G 2 631 674 368 34 305 305 264 264 370 921 797 60 4
75 280SA MMG-G 2 631 674 368 34 305 305 290 290 370 1037.5 856 65 4
90 280MA MMG-G 2 631 674 368 34 305 305 290 290 370 1037.5 856 65 4
110 315SA MMG-G 2 631 674 368 34 305 305 325 325 370 1216 986 65 4
132 315MA MMG-G 2 631 674 368 34 305 305 325 325 370 1266 986 65 4
160 315LA MMG-G 2 631 674 368 34 305 305 325 325 370 1366 986 65 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
30 200L Siemens 2 1320 200 51 460 435 394 8.5 6 23 13 56 41 164 185 432 1.04
37 200L Siemens 2 1320 200 51 460 435 394 8.5 6 23 13 56 41 164 214 461 1.04
45 225M Siemens 2 1350 200 51 - 485 446 8.5 4 23 13 56 108 164 330 569 1.13
55 250M Siemens 2 1450 200 51 525 560 526 9 6 23 13 56 86 164 420 689 1.32
75 280S Siemens 2 1550 200 51 575 610 570 9 6 23 13 56 59 164 530 806 1.44
90 280M Siemens 2 1550 200 51 575 610 570 9 6 23 13 56 169 164 615 891 1.53
110 315S Siemens 2 1600 200 50.5 600 650 600 9 6 23 13 56 99 164 840 1124 2.49
132 315M Siemens 2 1600 200 50.5 600 650 600 9 6 23 13 56 264 164 900 1184 2.75
160 315L Siemens 2 1600 200 50.5 600 650 600 9 6 23 13 56 264 164 980 1264 2.82
30 200LA MMG-G 2 1320 200 51 460 435 394 8.5 6 23 13 56 72 164 265 429 1.498
37 200LB MMG-G 2 1320 200 51 460 435 394 8.5 6 23 13 56 72 164 300 464 1.498
45 225MA MMG-G 2 1350 200 51 - 485 446 8.5 4 23 13 56 83 164 340 504 1.576
55 250MA MMG-G 2 1450 200 51 525 560 526 9 6 23 13 56 93 164 465 629 1.780
75 280SA MMG-G 2 1550 200 51 575 610 570 9 6 23 13 56 110 164 553 717 2.000
90 280MA MMG-G 2 1550 200 51 575 610 570 9 6 23 13 56 110 164 620 784 2.000
110 315SA MMG-G 2 1600 200 51 600 660 620 9 6 23 12 55 239 164 900 1064 2.565
132 315MA MMG-G 2 1600 200 51 600 660 620 9 6 23 12 55 289 164 960 1124 2.630
160 315LA MMG-G 2 1700 200 51 650 660 620 9 6 23 12 55 289 164 1030 1194 2.758

41
12
Performance curves and technical data

4-pole
LS 65-50-241

H
[m]
LS 65-50-241B
22 50 Hz, n = 1440 min-1
/241.0 ISO 9906 Grade 2B

20

18

/213.0
16

14

/185.0
12

/171.0
10

8
NPSH
[m]
6 12

/241.0
4 /213.0 8

/171.0 /185.0
2 4

0 0
0 5 10 15 20 25 30 35 40 45 50 Q [m³/h]
P2 Eta
[kW] [%]
7 70

6 /213.0 60
/241.0
/171.0 /185.0
5 50

4 40

/241.0
3 30

2 /213.0 20
/185.0
TM07 2690 4018

1 /171.0 10

0 0
0 5 10 15 20 25 30 35 40 45 50 Q [m³/h]

42
 12

Performance curves and technical data

LS 65-50-241 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 65-50-241 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
1.5 090LC MG 4 510 545 305 24 216 216 209 209 270 371 424 24 3
2.2 100LB MG 4 510 545 305 24 216 216 209 209 270 395 464 28 3
3 100LC MG 4 510 545 305 24 216 216 209 209 270 395 464 28 3
4 112MC MG 4 510 545 305 24 216 216 209 209 270 432 475 28 3
5.5 132SB MG 4 510 545 305 24 216 216 209 209 270 459 500 38 3
1.5 090L MMG-G 4 510 545 305 24 216 216 209 209 270 369.5 545 24 3
2.2 100LA MMG-G 4 510 545 305 24 216 216 209 209 270 392 484 28 3
3 100LB MMG-G 4 510 545 305 24 216 216 209 209 270 392 484 28 3
4 112M MMG-G 4 510 545 305 24 216 216 209 209 270 412.5 491 28 3
5.5 132S MMG-G 4 510 545 305 24 216 216 209 209 270 466 509 38 3

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
1.5 090LC MG 4 880 200 20 - 330 286 8.5 4 18 - 20 16 73 17 135 0.41
2.2 100LB MG 4 920 200 20 260 330 286 8.5 6 18 - 20 3 73 25 146 0.42
3 100LC MG 4 920 200 20 260 330 286 8.5 6 18 - 20 3 73 29 150 0.42
4 112MC MG 4 940 200 20 270 330 286 8.5 6 18 - 20 20 73 35 156 0.43
5.5 132SB MG 4 1000 200 10 - 315 272 8.5 4 18 - 30 - 73 54 178 0.47
1.5 090L MMG-G 4 880 200 20 - 330 286 8.5 4 18 - 20 18 73 29 102 0.704
2.2 100LA MMG-G 4 920 200 20 260 330 286 8.5 6 18 - 20 - 73 40 113 0.653
3 100LB MMG-G 4 920 200 20 260 330 286 8.5 6 18 - 20 - 73 42 115 0.653
4 112M MMG-G 4 940 200 20 270 330 286 8.5 6 18 - 20 1 73 53 126 0.671
5.5 132S MMG-G 4 1000 200 10 - 315 272 8.5 4 18 - 30 - 73 76 149 0.723

43
12
Performance curves and technical data

LS 65-50-330

H
[m]
40 /330.0 LS 65-50-330D
38 50 Hz, n = 1465 min-1
ISO 9906 Grade 2B
36

34 /305.0

32

30
/279.0
28

26

24 /254.0

22

20 /229.0
18

16

14

12

10
NPSH
8
[m]
6 /305.0 /330.0 6
/229.0 /254.0 /279.0
4 4

2 2

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 Q [m³/h]
P2 Eta
[kW] [%]
14 70

12 /330.0 60
/279.0 /305.0
/254.0
/229.0
10 /330.0 50

8 /305.0 40

6 /279.0 30
/254.0
4 20
/229.0
TM07 2691 4018

2 10

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 Q [m³/h]

44
 12

Performance curves and technical data

LS 65-50-330 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 65-50-330 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
4 112MC MG 4 510 545 305 24 254 254 209 209 355 432 513 28 3
5.5 132SB MG 4 510 545 305 24 254 254 209 209 355 459 538 38 3
7.5 132MB MG 4 510 545 305 24 254 254 209 209 355 509 538 38 3
11 160MB MG 4 510 545 305 24 254 254 209 209 355 581 572 42 3
15 160LB MG 4 510 545 305 24 254 254 209 209 355 655 572 42 3
4 112M MMG-G 4 510 545 305 24 254 254 209 209 355 412.5 529 28 3
5.5 132S MMG-G 4 510 545 305 24 254 254 209 209 355 466 547 38 3
7.5 132M MMG-G 4 510 545 305 24 254 254 209 209 355 504 547 38 3
11 160M MMG-G 4 510 545 305 24 254 254 209 209 355 608 577 42 3
15 160L MMG-G 4 510 545 305 24 254 254 209 209 355 652 577 42 3

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
4 112MC MG 4 940 200 20 270 330 286 8.5 6 18 - 20 - 95 35 178 0.64
5.5 132SB MG 4 1010 200 20 305 330 286 8.5 6 18 - 20 - 95 54 202 0.64
7.5 132MB MG 4 1010 200 20 305 330 286 8.5 6 18 - 20 - 95 68 216 0.64
11 160MB MG 4 1140 200 20 370 390 346 8.5 6 18 - 20 - 95 95 254 0.59
15 160LB MG 4 1140 200 20 370 390 346 8.5 6 18 - 20 59 95 115 274 0.61
4 112M MMG-G 4 940 200 20 270 330 286 8.5 6 18 - 20 1 95 53 148 0.805
5.5 132S MMG-G 4 1010 200 20 305 330 286 8.5 6 18 - 20 - 95 76 171 0.857
7.5 132M MMG-G 4 1010 200 20 305 330 286 8.5 6 18 - 20 22 95 93 188 0.873
11 160M MMG-G 4 1140 200 20 370 390 346 8.5 6 18 - 20 - 95 130 225 0.966
15 160L MMG-G 4 1140 200 20 370 390 346 8.5 6 18 - 20 40 95 150 245 0.996

45
12
Performance curves and technical data

LS 100-80-241

H
[m]
22 LS 100-80-241E
/241.3
21 50 Hz, n = 1450 min-1
20 ISO 9906 Grade 2B

19

18

17 /216.0
16

15

14

13 /190.5

12

11

10
/165.0
9

7
NPSH
6 [m]
5 5
/190.5 /165.0 /216.0
4 /241.3 4

3 3

2 2

1 1

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90Q [m³/h]
P2 Eta
[kW] [%]
8 80

7 70
/216.0 /241.3
/165.0 /190.5
6 60
/241.3
5 50

4 40
/216.0
3 30
/190.5
2 20
/165.0
TM07 2627 4018

1 10

0 0
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90Q [m³/h]

46
 12

Performance curves and technical data

LS 100-80-241 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 100-80-241 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
2.2 100LB MG 4 510 545 305 24 279 279 222 222 290 395 489 28 3
3 100LC MG 4 510 545 305 24 279 279 222 222 290 395 489 28 3
4 112MC MG 4 510 545 305 24 279 279 222 222 290 432 500 28 3
5.5 132SB MG 4 510 545 305 24 279 279 222 222 290 459 525 38 3
7.5 132MB MG 4 510 545 305 24 279 279 222 222 290 509 525 38 3
2.2 100LA MMG-G 4 510 545 305 24 279 279 222 222 290 392 509 28 3
3 100LB MMG-G 4 510 545 305 24 279 279 222 222 290 392 509 28 3
4 112M MMG-G 4 510 545 305 24 279 279 222 222 290 412.5 516 28 3
5.5 132S MMG-G 4 510 545 305 24 279 279 222 222 290 466 534 38 3
7.5 132M MMG-G 4 510 545 305 24 279 279 222 222 290 504 534 38 3

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
2.2 100LB MG 4 920 200 20 260 315 271 8.5 6 18 - 20 3 80 25 152 0.53
3 100LC MG 4 920 200 20 260 315 271 8.5 6 18 - 20 3 80 29 156 0.53
4 112MC MG 4 930 200 20 265 315 271 8.5 6 18 - 20 30 80 35 161 0.55
5.5 132SB MG 4 1010 200 20 305 315 271 8.5 6 18 - 20 - 80 54 185 0.58
7.5 132MB MG 4 1010 200 20 305 315 271 8.5 6 18 - 20 27 80 68 199 0.60
2.2 100LA MMG-G 4 920 200 20 260 315 271 8.5 6 18 - 20 - 80 40 120 0.791
3 100LB MMG-G 4 920 200 20 260 315 271 8.5 6 18 - 20 - 80 42 122 0.791
4 112M MMG-G 4 930 200 20 265 315 271 8.5 6 18 - 20 11 80 53 133 0.810
5.5 132S MMG-G 4 1010 200 20 305 315 271 8.5 6 18 - 20 - 80 76 156 0.879
7.5 132M MMG-G 4 1010 200 20 305 315 271 8.5 6 18 - 20 22 80 93 173 0.896

47
12
Performance curves and technical data

LS 100-80-356

H
[m]
LS 100-80-356E
48
50 Hz, n = 1470 min-1
ISO 9906 Grade 2B
/355.6
44

40
/330.0

36

/304.8
32

28
/279.4

24

/254.0
20

16
NPSH
[m]
12 12

/330.0 /355.6
8 /304.8 8
/279.4
/254.0
4 4

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Q [m³/h]
P2 Eta
[kW] [%]
40 80
/355.6

35 70
/330.0
/279.4 /304.8
30 /254.0 60

25 50

20 /355.6 40

15 /330.0 30
/304.8
10 20
/279.4
/254.0
TM07 2628 4018

5 10

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Q [m³/h]

48
 12

Performance curves and technical data

LS 100-80-356 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 100-80-356 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
7.5 132MB MG 4 644 687 368 34 305 305 247 247 380 509 576 38 3
11 160MB MG 4 644 687 368 34 305 305 247 247 380 581 611 42 3
15 160LB MG 4 644 687 368 34 305 305 247 247 380 655 611 42 3
18.5 180M Siemens 4 644 687 368 34 305 305 247 247 380 712 660 48 4
22 180L Siemens 4 644 687 368 34 305 305 247 247 380 712 660 48 4
30 200L Siemens 4 644 687 368 34 305 305 247 247 380 769 709 55 4
7.5 132M MMG-G 4 644 687 368 34 305 305 247 247 380 504 585 38 3
11 160M MMG-G 4 644 687 368 34 305 305 247 247 380 608 615 42 3
15 160L MMG-G 4 644 687 368 34 305 305 247 247 380 652 615 42 3
18.5 180M MMG-G 4 644 687 368 34 305 305 247 247 380 672 641 48 4
22 180L MMG-G 4 644 687 368 34 305 305 247 247 380 710 641 48 4
30 200L MMG-G 4 644 687 368 34 305 305 247 247 380 770 706 55 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
7.5 132MB MG 4 1090 200 40 345 315 271 8.5 6 18 36 79 30 177 68 300 0.82
11 160MB MG 4 1220 200 40 410 390 346 8.5 6 18 36 79 - 177 95 341 0.88
15 160LB MG 4 1220 200 40 410 390 346 8.5 6 18 36 79 46 177 115 361 0.91
18.5 180M Siemens 4 1250 200 41 - 400 360 8.5 4 23 36 79 35 177 126 374 0.96
22 180L Siemens 4 1250 200 41 - 400 360 8.5 4 23 36 79 65 177 146 394 0.98
30 200L Siemens 4 1300 200 40 450 420 372 9 6 18 36 79 63 177 200 449 1.06
7.5 132M MMG-G 4 1090 200 40 345 315 271 8.5 6 18 36 79 25 177 93 270 1.157
11 160M MMG-G 4 1220 200 40 410 390 346 8.5 6 18 36 79 - 177 130 307 1.250
15 160L MMG-G 4 1220 200 40 410 390 346 8.5 6 18 36 79 43 177 150 327 1.288
18.5 180M MMG-G 4 1250 200 41 - 400 360 8.5 4 23 36 79 34 177 195 372 1.325
22 180L MMG-G 4 1250 200 41 - 400 360 8.5 4 23 36 79 72 177 205 382 1.359
30 200L MMG-G 4 1300 200 40 450 420 372 9 6 18 36 79 82 177 285 462 1.507

49
12
Performance curves and technical data

LS 125-100-279

H
[m]
28
LS 125-100-279E
50 Hz, n = 1465 min-1
26 ISO 9906 Grade 2B
/279.4

24

22
/254.0
20

18

/229.0
16

14

12

10 NPSH
[m]
8 /279.4 8

/254.0
6 6

4 4
/229.0

2 2

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]
P2 Eta
[kW] [%]
16 80

14 /279.4 70
/254.0
/229.0
12 60

10 /279.4 50

8 40
/254.0
6 30

4 /229.0 20
TM07 2630 4018

2 10

0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 Q [m³/h]

50
 12

Performance curves and technical data

LS 125-100-279 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-279 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
2.2 100LB MG 4 631 674 368 34 305 305 244 244 370 395 543 28 8
3 100LC MG 4 631 674 368 34 305 305 244 244 370 395 543 28 8
4 112MC MG 4 631 674 368 34 305 305 244 244 370 432 574 28 8
5.5 132SB MG 4 631 674 368 34 305 305 244 244 370 459 579 38 3
7.5 132MB MG 4 631 674 368 34 305 305 244 244 370 509 579 38 3
11 160MB MG 4 631 674 368 34 305 305 244 244 370 581 634 42 3
15 160LB MG 4 631 674 368 34 305 305 244 244 370 655 634 42 3
2.2 100LA MMG-G 4 631 674 368 34 305 305 244 244 370 392 563 28 8
3 100LB MMG-G 4 631 674 368 34 305 305 244 244 370 392 563 28 8
4 112M MMG-G 4 631 674 368 34 305 305 244 244 370 412.5 570 28 8
5.5 132S MMG-G 4 631 674 368 34 305 305 244 244 370 466 588 38 3
7.5 132M MMG-G 4 631 674 368 34 305 305 244 244 370 504 588 38 3
11 160M MMG-G 4 631 674 368 34 305 305 244 244 370 608 618 42 3
15 160L MMG-G 4 631 674 368 34 305 305 244 244 370 652 618 42 3

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
2.2 100LB MG 4 1020 200 50 310 315 271 8.5 6 18 13 56 39 164 25 245 0.76
3 100LC MG 4 1020 200 50 310 315 271 8.5 6 18 13 56 39 164 29 249 0.76
4 112MC MG 4 1020 200 50 310 315 267 9 6 18 13 56 23 164 35 255 0.77
5.5 132SB MG 4 1100 200 50 350 315 271 8.5 6 18 13 56 39 164 54 275 0.78
7.5 132MB MG 4 1100 200 50 350 315 271 8.5 6 18 13 56 39 164 68 289 0.81
11 160MB MG 4 1250 200 50 425 334 286 9 6 18 13 56 - 164 95 323 0.90
15 160LB MG 4 1250 200 50 425 334 286 9 6 18 13 56 45 164 115 343 0.92
2.2 100LA MMG-G 4 1020 200 50 310 315 271 8.5 6 18 13 56 - 164 40 204 1.038
3 100LB MMG-G 4 1020 200 50 310 315 271 8.5 6 18 13 56 - 164 42 206 1.038
4 112M MMG-G 4 1020 200 50 310 315 267 9 6 18 13 56 19 164 53 217 1.054
5.5 132S MMG-G 4 1100 200 50 350 315 271 8.5 6 18 13 56 - 164 76 240 1.108
7.5 132M MMG-G 4 1100 200 50 350 315 271 8.5 6 18 13 56 25 164 93 257 1.130
11 160M MMG-G 4 1250 200 50 425 334 286 9 6 18 13 56 - 164 130 294 1.244
15 160L MMG-G 4 1250 200 50 425 334 286 9 6 18 13 56 23 164 150 314 1.264

51
12
Performance curves and technical data

LS 125-100-305

H
[m]
34
/304.8 LS 125-100-305F
50 Hz, n = 1470 min-1
32
ISO 9906 Grade 2B

30

28 /279.4

26

24 /254.0

22

20
/228.6
18

16
/203.2
14

12

10

6 NPSH
[m]
4 /203.2 /228.6 8
/254.0 /279.4 /304.8
2 4

0 0
0 20 40 60 80 100 120 140 160 180 200 220 Q [m³/h]
P2 Eta
[kW] [%]
32 80

28 /304.8 70
/228.6 /254.0 /279.4
/203.2
24 60

20 50
/304.8
16 40
/279.4
12 30
/254.0
8 /228.6 20
TM07 2632 4018

4 /203.2 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 Q [m³/h]

52
 12

Performance curves and technical data

LS 125-100-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
4 112MC MG 4 631 674 368 34 305 305 244 244 370 432 574 28 8
5.5 132SB MG 4 631 674 368 34 305 305 244 244 370 459 579 38 3
7.5 132MB MG 4 631 674 368 34 305 305 244 244 370 509 579 38 3
11 160MB MG 4 631 674 368 34 305 305 244 244 370 581 634 42 3
15 160LB MG 4 631 674 368 34 305 305 244 244 370 655 634 42 3
18.5 180M Siemens 4 631 674 368 34 305 305 244 244 370 712 663 48 4
22 180L Siemens 4 631 674 368 34 305 305 244 244 370 712 663 48 4
4 112M MMG-G 4 631 674 368 34 305 305 244 244 370 412.5 570 28 8
5.5 132S MMG-G 4 631 674 368 34 305 305 244 244 370 466 588 38 3
7.5 132M MMG-G 4 631 674 368 34 305 305 244 244 370 504 588 38 3
11 160M MMG-G 4 631 674 368 34 305 305 244 244 370 608 618 42 3
15 160L MMG-G 4 631 674 368 34 305 305 244 244 370 652 618 42 3
18.5 180M MMG-G 4 631 674 368 34 305 305 244 244 370 672 644 48 4
22 180L MMG-G 4 631 674 368 34 305 305 244 244 370 710 644 48 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
4 112MC MG 4 1020 200 50 310 315 267 9 6 18 13 56 23 164 35 255 0.77
5.5 132SB MG 4 1100 200 50 350 315 271 8.5 6 18 13 56 39 164 54 275 0.78
7.5 132MB MG 4 1100 200 50 350 315 271 8.5 6 18 13 56 39 164 68 289 0.81
11 160MB MG 4 1250 200 50 425 334 286 9 6 18 13 56 - 164 95 323 0.90
15 160LB MG 4 1250 200 50 425 334 286 9 6 18 13 56 45 164 115 343 0.92
18.5 180M Siemens 4 1280 200 50 440 390 346 8.5 6 18 13 56 28 164 126 363 0.97
22 180L Siemens 4 1280 200 50 440 390 346 8.5 6 18 13 56 58 164 146 383 0.99
4 112M MMG-G 4 1020 200 50 310 315 267 9 6 18 13 56 19 164 53 217 1.054
5.5 132S MMG-G 4 1100 200 50 350 315 271 8.5 6 18 13 56 - 164 76 240 1.108
7.5 132M MMG-G 4 1100 200 50 350 315 271 8.5 6 18 13 56 25 164 93 257 1.130
11 160M MMG-G 4 1250 200 50 425 334 286 9 6 18 13 56 - 164 130 294 1.244
15 160L MMG-G 4 1250 200 50 425 334 286 9 6 18 13 56 23 164 150 314 1.264
18.5 180M MMG-G 4 1280 200 50 440 390 346 8.5 6 18 13 56 14 164 195 359 1.317
22 180L MMG-G 4 1280 200 50 440 390 346 8.5 6 18 13 56 52 164 205 369 1.351

53
12
Performance curves and technical data

LS 125-100-381

H
[m]
LS 125-100-381F
55 50 Hz, n = 1490 min-1
/381.0 ISO 9906 Grade 2B

50

45
/348.0

40

/317.5
35

30
/279.4

25

/241.3
20
NPSH
[m]
15 12

/348.0 /381.0
10 /317.5 8
/279.4
/241.3

5 4

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 Q [m³/h]
P2 Eta
[kW] [%]
80 80

70 70
/279.4 /317.5 /348.0 /381.0
/241.3
60 60
/381.0
50 50

40 40
/348.0
30 30
/317.5
20 20
/279.4
TM07 2633 4018

10 /241.3 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 Q [m³/h]

54
 12

Performance curves and technical data

LS 125-100-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
11 160MB MG 4 631 674 368 34 357 357 279 279 470 581 707 42 3
15 160LB MG 4 631 674 368 34 357 357 279 279 470 655 707 42 3
18.5 180M Siemens 4 631 674 368 34 357 357 279 279 470 712 736 48 4
22 180L Siemens 4 631 674 368 34 357 357 279 279 470 712 736 48 4
30 200L Siemens 4 631 674 368 34 357 357 279 279 470 769 765 55 13
37 225S Siemens 4 631 674 368 34 357 357 299 299 470 789 808 60 4
45 225M Siemens 4 631 674 368 34 357 357 299 299 470 849 808 60 4
55 250M Siemens 4 631 674 368 34 357 357 279 279 470 957 860 65 4
75 280S Siemens 4 631 674 368 34 357 357 279 279 470 960 883 75 4
11 160M MMG-G 4 631 674 368 34 357 357 279 279 470 608 691 42 3
15 160L MMG-G 4 631 674 368 34 357 357 279 279 470 652 691 42 3
18.5 180M MMG-G 4 631 674 368 34 357 357 279 279 470 672 717 48 4
22 180L MMG-G 4 631 674 368 34 357 357 279 279 470 710 717 48 4
30 200L MMG-G 4 631 674 368 34 357 357 279 279 470 770 782 55 13
37 225SC MMG-G 4 631 674 368 34 357 357 299 299 470 816 828 60 4
45 225MC MMG-G 4 631 674 368 34 357 357 299 299 470 841 828 60 4
55 250MC MMG-G 4 631 674 368 34 357 357 299 299 470 921 870 65 4
75 280SB MMG-G 4 631 674 368 34 357 357 299 299 470 1037.5 903 75 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
11 160MB MG 4 1250 200 80 425 390 342 9 6 18 - 26 - 255 95 427 1.17
15 160LB MG 4 1250 200 80 425 390 342 9 6 18 - 26 56 255 115 447 1.22
18.5 180M Siemens 4 1300 200 80 - 390 350 8.5 4 18 - 26 38 255 126 461 1.21
22 180L Siemens 4 1300 200 80 - 390 350 8.5 4 18 - 26 68 255 146 481 1.24
30 200L Siemens 4 1350 200 80 475 435 392 8.5 6 18 - 26 80 255 200 540 1.31
37 225S Siemens 4 1420 200 80 - 495 452 9 4 23 - 26 47 255 290 654 1.41
45 225M Siemens 4 1420 200 80 - 495 452 9 4 23 - 26 107 255 330 694 1.46
55 250M Siemens 4 1500 200 80 - 545 504 8.5 4 23 - 26 66 255 460 827 1.57
75 280S Siemens 4 1600 200 80 600 605 561 8.5 6 18 - 26 49 255 575 956 1.60
11 160M MMG-G 4 1250 200 80 425 390 342 9 6 18 - 26 9 255 130 385 1.570
15 160L MMG-G 4 1250 200 80 425 390 342 9 6 18 - 26 53 255 150 405 1.619
18.5 180M MMG-G 4 1300 200 80 - 390 350 8.5 4 18 - 26 24 255 195 450 1.643
22 180L MMG-G 4 1300 200 80 - 390 350 8.5 4 18 - 26 62 255 205 460 1.685
30 200L MMG-G 4 1350 200 80 475 435 392 8.5 6 18 - 26 81 255 285 540 1.815
37 225SC MMG-G 4 1420 200 80 - 495 452 9 4 23 - 26 48 255 350 605 1.933
45 225MC MMG-G 4 1420 200 80 - 495 452 9 4 23 - 26 73 255 360 615 1.963
55 250MC MMG-G 4 1500 200 80 - 545 504 8.5 4 23 - 26 73 255 480 735 2.131
75 280SB MMG-G 4 1600 200 80 600 605 557 9 6 18 - 26 89 255 621 876 2.337

55
12
Performance curves and technical data

LS 150-125-305

H
[m]
34
/304.8 LS 150-125-305E
50 Hz, n = 1490 min-1
32
ISO 9906 Grade 2B

30
/279.4
28

26

24 /254.0

22

20
/228.6
18

16
/203.2
14

12

10 NPSH
[m]
8 8
/304.8
/279.4
6 /254.0 6
/228.6
/203.2
4 4

2 2

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 Q [m³/h]
P2 Eta
[kW] [%]
36 90

32 80
/304.8
/254.0 /279.4
28 /228.6 /304.8 70
/203.2
24 60
/279.4
20 50

16 /254.0 40

12 30
/228.6
8 /203.2 20
TM07 2634 4018

4 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340 Q [m³/h]

56
 12

Performance curves and technical data

LS 150-125-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 150-125-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
5.5 132SB MG 4 775 775 419 34 330 330 285 285 475 459 770 38 5
7.5 132MB MG 4 775 775 419 34 330 330 285 285 475 509 770 38 5
11 160MB MG 4 775 775 419 34 330 330 285 285 475 581 725 42 12
15 160LB MG 4 775 775 419 34 330 330 285 285 475 655 725 42 12
18.5 180M Siemens 4 775 775 419 34 330 330 285 285 475 712 774 48 21
22 180L Siemens 4 775 775 419 34 330 330 285 285 475 712 774 48 21
30 200L Siemens 4 775 775 419 34 330 330 285 285 475 769 803 55 21
37 225S Siemens 4 775 775 419 34 330 330 305 305 475 789 826 60 30
5.5 132S MMG-G 4 775 775 419 34 330 330 285 285 475 466 699 38 5
7.5 132M MMG-G 4 775 775 419 34 330 330 285 285 475 504 699 38 5
11 160M MMG-G 4 775 775 419 34 330 330 285 285 475 608 729 42 12
15 160L MMG-G 4 775 775 419 34 330 330 285 285 475 652 729 42 12
18.5 180M MMG-G 4 775 775 419 34 330 330 285 285 475 672 755 48 21
22 180L MMG-G 4 775 775 419 34 330 330 285 285 475 710 755 48 21
30 200L MMG-G 4 775 775 419 34 330 330 285 285 475 770 820 55 21
37 225SC MMG-G 4 775 775 419 34 330 330 305 305 475 816 866 60 30

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
5.5 132SB MG 4 1160 200 60 380 330 268 11 6 23 96 96 40 268 54 386 1.17
7.5 132MB MG 4 1160 200 60 380 330 268 11 6 23 96 96 40 268 68 400 1.21
11 160MB MG 4 1300 200 60 450 390 346 8.5 6 18 96 96 - 268 95 442 1.18
15 160LB MG 4 1300 200 60 450 390 346 8.5 6 18 96 96 56 268 115 462 1.22
18.5 180M Siemens 4 1340 200 60 470 400 360 8.5 6 18 96 96 28 268 126 477 1.25
22 180L Siemens 4 1340 200 60 470 400 360 8.5 6 18 96 96 58 268 146 497 1.27
30 200L Siemens 4 1380 200 60 490 425 381 8.5 6 18 96 96 66 268 200 548 1.33
37 225S Siemens 4 1450 200 60 525 465 421 8.5 6 18 96 96 47 268 290 656 1.43
5.5 132S MMG-G 4 1160 200 60 380 330 268 11 6 23 96 96 - 268 76 344 1.498
7.5 132M MMG-G 4 1160 200 60 380 330 268 11 6 23 96 96 28 268 93 361 1.528
11 160M MMG-G 4 1300 200 60 450 390 346 8.5 6 18 96 96 - 268 130 398 1.647
15 160L MMG-G 4 1300 200 60 450 390 346 8.5 6 18 96 96 43 268 150 418 1.694
18.5 180M MMG-G 4 1340 200 60 470 400 360 8.5 6 18 96 96 32 268 195 463 1.724
22 180L MMG-G 4 1340 200 60 470 400 360 8.5 6 18 96 96 70 268 205 473 1.765
30 200L MMG-G 4 1380 200 60 490 425 381 8.5 6 18 96 96 90 268 285 553 1.928
37 225SC MMG-G 4 1450 200 60 525 465 421 8.5 6 18 96 96 75 268 350 618 2.068

57
12
Performance curves and technical data

LS 150-125-381

H
[m]
60
LS 150-125-381F
50 Hz, n = 1490 min-1
56 /381.0 ISO 9906 Grade 2B

52

48 /355.6

44
/330.6
40

36 /304.8

32
/279.4
28

24

20

16

12 NPSH
[m]
8 /304.8 /330.6 /355.6 8
/279.4 /381.0

4 4

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]
P2 Eta
[kW] [%]
90 90
/381.0
80 /355.6 80
/304.8 /330.6
70 /279.4 70
/381.0
60 60

50 /355.6 50

40 /330.6 40

30 /304.8 30

20 /279.4 20
TM07 2635 4018

10 10

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]

58
 12

Performance curves and technical data

LS 150-125-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 150-125-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
15 160LB MG 4 801 801 432 34 356 381 285 285 550 655 766 42 12
18.5 180M Siemens 4 801 801 432 34 356 381 285 285 550 712 816 48 21
22 180L Siemens 4 801 801 432 34 356 381 285 285 550 712 816 48 21
30 200L Siemens 4 801 801 432 34 356 381 305 305 550 769 865 55 21
37 225S Siemens 4 801 801 432 34 356 381 305 305 550 789 888 60 30
45 225M Siemens 4 801 801 432 34 356 381 305 305 550 849 888 60 30
55 250M Siemens 4 801 801 432 34 356 381 305 305 550 957 960 65 30
75 280S Siemens 4 801 801 432 34 356 381 305 305 550 960 983 75 40
15 160L MMG-G 4 801 801 432 34 356 381 285 285 550 652 771 42 12
18.5 180M MMG-G 4 801 801 432 34 356 381 285 285 550 672 797 48 21
22 180L MMG-G 4 801 801 432 34 356 381 285 285 550 710 797 48 21
30 200L MMG-G 4 801 801 432 34 356 381 305 305 550 770 882 55 21
37 225SC MMG-G 4 801 801 432 34 356 381 305 305 550 816 908 60 30
45 225MC MMG-G 4 801 801 432 34 356 381 305 305 550 841 908 60 30
55 250MC MMG-G 4 801 801 432 34 356 381 305 305 550 921 950 65 30
75 280SB MMG-G 4 801 801 432 34 356 381 305 305 550 1037.5 983 75 40

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
15 160LB MG 4 1300 200 60 450 390 346 8.5 6 18 109 109 68 318 115 515 1.47
18.5 180M Siemens 4 1350 200 60 475 390 346 8.5 6 18 109 109 31 318 126 528 1.48
22 180L Siemens 4 1350 200 60 475 390 346 8.5 6 18 109 109 61 318 146 548 1.51
30 200L Siemens 4 1390 200 60 - 445 400 9 4 23 109 109 69 318 200 616 1.58
37 225S Siemens 4 1460 200 60 - 495 452 9 4 23 109 109 50 318 290 718 1.68
45 225M Siemens 4 1460 200 60 - 495 452 9 4 23 109 109 110 318 330 758 1.74
55 250M Siemens 4 1540 200 60 570 545 500 9 6 23 109 109 69 318 460 895 1.90
75 280S Siemens 4 1650 200 60 625 610 566 9 6 23 109 109 42 318 575 1024 2.03
15 160L MMG-G 4 1300 200 60 450 390 346 8.5 6 18 109 109 56 318 150 468 1.985
18.5 180M MMG-G 4 1350 200 60 475 390 346 8.5 6 18 109 109 35 318 195 513 2.020
22 180L MMG-G 4 1350 200 60 475 390 346 8.5 6 18 109 109 73 318 205 523 2.067
30 200L MMG-G 4 1390 200 60 - 445 400 9 4 23 109 109 93 318 285 603 2.225
37 225SC MMG-G 4 1460 200 60 - 495 452 9 4 23 109 109 78 318 350 668 2.344
45 225MC MMG-G 4 1460 200 60 - 495 452 9 4 23 109 109 103 318 360 678 2.377
55 250MC MMG-G 4 1540 200 60 570 545 500 9 6 23 109 109 103 318 480 798 2.564
75 280SB MMG-G 4 1650 200 60 625 610 566 9 6 23 109 109 120 318 621 939 2.804

59
12
Performance curves and technical data

LS 200-150-305

H
[m]
36 LS 200-150-305C
/304.8 50 Hz, n = 1490 min-1
34
ISO 9906 Grade 2B
32

30
/279.4
28

26

24
/254.0
22

20
/229.0
18

16
/203.2
14

12

10
NPSH
8
[m]
6 6
/203.2 /229.0 /254.0 /279.4 /304.8
4 4

2 2

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]
P2 Eta
[kW] [%]
90 90

80 80
/279.4 /304.8
70 /229.0 /254.0 70
/203.2
60 60

50 50

40 /304.8 40

30 /279.4 30

20 /254.0 20
TM07 2637 4018

/229.0
10 /203.2 10

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]

60
 12

Performance curves and technical data

LS 200-150-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
11 160MB MG 4 801 801 432 34 356 406 305 305 530 581 763 42 12
15 160LB MG 4 801 801 432 34 356 406 305 305 530 655 763 42 12
18.5 180M Siemens 4 801 801 432 34 356 406 305 305 530 712 832 48 21
22 180L Siemens 4 801 801 432 34 356 406 305 305 530 712 832 48 21
30 200L Siemens 4 801 801 432 34 356 406 305 305 530 769 841 55 21
37 225S Siemens 4 801 801 432 34 356 406 305 305 530 789 884 60 30
45 225M Siemens 4 801 801 432 34 356 406 305 305 530 849 884 60 30
11 160M MMG-G 4 801 801 432 34 356 406 305 305 530 608 787 42 12
15 160L MMG-G 4 801 801 432 34 356 406 305 305 530 652 787 42 12
18.5 180M MMG-G 4 801 801 432 34 356 406 305 305 530 672 813 48 21
22 180L MMG-G 4 801 801 432 34 356 406 305 305 530 710 813 48 21
30 200L MMG-G 4 801 801 432 34 356 406 305 305 530 770 878 55 21
37 225SC MMG-G 4 801 801 432 34 356 406 305 305 530 816 904 60 30
45 225MC MMG-G 4 801 801 432 34 356 406 305 305 530 841 904 60 30

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
11 160MB MG 4 1300 200 60 450 390 346 8.5 6 18 109 109 8 411 95 597 1.42
15 160LB MG 4 1300 200 60 450 390 346 8.5 6 18 109 109 68 411 115 617 1.48
18.5 180M Siemens 4 1350 200 60 475 395 347 9 6 18 109 109 31 411 126 631 1.52
22 180L Siemens 4 1350 200 60 475 395 347 9 6 18 109 109 61 411 146 651 1.55
30 200L Siemens 4 1400 200 60 500 425 381 8.5 6 18 109 109 59 411 200 697 1.58
37 225S Siemens 4 1460 200 60 530 465 417 9 6 18 109 109 50 411 290 801 1.72
45 225M Siemens 4 1460 200 60 530 465 417 9 6 18 109 109 110 411 330 841 1.78
11 160M MMG-G 4 1300 200 60 450 390 346 8.5 6 18 109 109 12 411 130 541 1.977
15 160L MMG-G 4 1300 200 60 450 390 346 8.5 6 18 109 109 56 411 150 561 2.033
18.5 180M MMG-G 4 1350 200 60 475 395 347 9 6 18 109 109 35 411 195 606 2.069
22 180L MMG-G 4 1350 200 60 475 395 347 9 6 18 109 109 73 411 205 616 2.117
30 200L MMG-G 4 1400 200 60 500 425 381 8.5 6 18 109 109 83 411 285 696 2.272
37 225SC MMG-G 4 1460 200 60 530 465 417 9 6 18 109 109 78 411 350 761 2.393
45 225MC MMG-G 4 1460 200 60 530 465 417 9 6 18 109 109 103 411 360 771 2.426

61
12
Performance curves and technical data

LS 200-150-381

H
[m]
56
LS 200-150-381A
/381.0
50 Hz, n = 1490 min-1
52 ISO 9906 Grade 2B

/356.0
48

44

/330.0
40

36
/304.8

32

/280.0
28

24 NPSH
[m]
20 10
/381.0
16 /356.0 8
/330.0
/304.8
12 6
/280.0
8 4

4 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
P2 Eta
[kW] [%]
100 90

90 /381.0 80
/356.0
/280.0 /304.8 /330.0
80 /381.0 70

70 60
/356.0
60 50

50 /304.8 40

40 /330.0 30

30 /280.0 20
TM07 2639 4018

20 10

10 0
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]

62
 12

Performance curves and technical data

LS 200-150-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
18.5 180M Siemens 4 929 929 508 44.45 381 406 324 324 605 712 870 48 4
22 180L Siemens 4 929 929 508 44.45 381 406 324 324 605 712 870 48 4
30 200L Siemens 4 929 929 508 44.45 381 406 324 324 605 769 919 55 4
37 225S Siemens 4 929 929 508 44.45 381 406 324 324 605 789 922 60 7
45 225M Siemens 4 929 929 508 44.45 381 406 324 324 605 849 922 60 7
55 250M Siemens 4 929 929 508 44.45 381 406 324 324 605 957 1074 65 7
75 280S Siemens 4 929 929 508 44.45 381 406 324 324 605 960 1037 75 17
90 280M Siemens 4 929 929 508 44.45 381 406 324 324 605 1070 1037 75 17
110 315S Siemens 4 929 929 508 44.45 381 406 324 324 605 1102 1179 80 17
18.5 180M MMG-G 4 929 929 508 44.45 381 406 324 324 605 672 871 48 4
22 180L MMG-G 4 929 929 508 44.45 381 406 324 324 605 710 871 48 4
30 200L MMG-G 4 929 929 508 44.45 381 406 324 324 605 770 936 55 4
37 225SC MMG-G 4 929 929 508 44.45 381 406 324 324 605 816 962 60 7
45 225MC MMG-G 4 929 929 508 44.45 381 406 324 324 605 841 962 60 7
55 250MC MMG-G 4 929 929 508 44.45 381 406 324 324 605 921 1004 65 7
75 280SB MMG-G 4 929 929 508 44.45 381 406 324 324 605 1037.5 1037 75 17
90 280MB MMG-G 4 929 929 508 44.45 381 406 324 324 605 1087.5 1037 75 17
110 315SB MMG-G 4 929 929 508 44.45 381 406 324 324 605 1246 1132 80 17

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
18.5 180M Siemens 4 1500 200 130 550 390 346 8.5 6 18 91 91 10 455 126 687 1.79
22 180L Siemens 4 1500 200 130 550 390 346 8.5 6 18 91 91 40 455 146 707 1.82
30 200L Siemens 4 1530 200 130 565 425 377 9 6 18 91 91 58 455 200 764 1.88
37 225S Siemens 4 1590 200 130 595 465 421 8.5 6 18 91 91 42 455 290 862 1.94
45 225M Siemens 4 1590 200 130 595 465 421 8.5 6 18 91 91 102 455 330 902 2.00
55 250M Siemens 4 1660 200 130 630 555 493 11 6 23 91 91 71 455 460 1043 2.34
75 280S Siemens 4 1750 200 130 675 605 560 9 6 23 91 91 64 455 575 1176 2.36
90 280M Siemens 4 1750 200 130 675 605 560 9 6 23 91 91 174 455 675 1276 2.48
110 315S Siemens 4 1850 200 130 725 665 603 11 6 23 91 91 86 455 810 1412 2.81
18.5 180M MMG-G 4 1500 200 130 550 390 346 8.5 6 18 91 91 14 455 195 650 2.441
22 180L MMG-G 4 1500 200 130 550 390 346 8.5 6 18 91 91 52 455 205 660 2.493
30 200L MMG-G 4 1530 200 130 565 425 377 9 6 18 91 91 82 455 285 740 2.591
37 225SC MMG-G 4 1590 200 130 595 465 421 8.5 6 18 91 91 71 455 350 805 2.712
45 225MC MMG-G 4 1590 200 130 595 465 421 8.5 6 18 91 91 96 455 360 815 2.748
55 250MC MMG-G 4 1660 200 130 630 555 493 11 6 23 91 91 106 455 480 935 2.954
75 280SB MMG-G 4 1750 200 130 675 605 560 9 6 23 91 91 142 455 621 1076 3.217
90 280MB MMG-G 4 1750 200 130 675 605 560 9 6 23 91 91 192 455 706 1161 3.648
110 315SB MMG-G 4 1850 200 130 725 665 617 8 6 23 91 91 251 455 920 1375 4.153

63
12
Performance curves and technical data

LS 200-150-483

H
[m]
LS 200-150-483D
90 50 Hz, n = 1480 min-1
ISO 9906 Grade 2B
/482.6

80
/457.2

70 /432.0

/406.4
60

/381.0
50
NPSH
[m]
40 8

/482.6
/457.2
30 6
/432.0
/406.4
/381.0
20 4

10 2

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]
P2 Eta
[kW] [%]
180 90

160 80
/482.6
140 /457.2 70
/381.0 /406.4 /432.0
120 60
/482.6
100 50
/457.2
80 /432.0 40

60 /406.4 30
/381.0
40 20
TM07 2641 4018

20 10

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]

64
 12

Performance curves and technical data

LS 200-150-483 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-483 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
55 250M Siemens 4 888 888 489 44.45 432 432 311 311 615 957 982 65 4
75 280S Siemens 4 888 888 489 44.45 432 432 311 311 615 960 1005 75 13
90 280M Siemens 4 888 888 489 44.45 432 432 311 311 615 1070 1005 75 13
110 315S Siemens 4 899 899 489 50.80 432 432 371 371 615 1102 1147 80 13
132 315MA Siemens 4 899 899 489 50.80 432 432 371 371 615 1262 1147 80 13
160 315L Siemens 4 899 899 489 50.80 432 432 371 371 615 1262 1147 80 13
55 250MC MMG-G 4 888 888 489 44.45 432 432 311 311 615 921 972 65 4
75 280SB MMG-G 4 888 888 489 44.45 432 432 311 311 615 1037.5 1005 75 13
90 280MB MMG-G 4 888 888 489 44.45 432 432 311 311 615 1087.5 1005 75 13
110 315SB MMG-G 4 899 899 489 50.80 432 432 371 371 615 1246 1160 80 13
132 315MB MMG-G 4 899 899 489 50.80 432 432 371 371 615 1296 1160 80 13
160 315LB MMG-G 4 899 899 489 50.80 432 432 371 371 615 1396 1160 80 13

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
55 250M Siemens 4 1580 200 80 590 545 502 9 6 23 119 119 80 534 460 1119 2.09
75 280S Siemens 4 1673 200 80 637 605 560 9 6 23 119 119 69 534 575 1249 2.22
90 280M Siemens 4 1673 200 80 637 605 560 9 6 23 119 119 179 534 675 1349 2.35
110 315S Siemens 4 1852 200 80 726 710 650 11 6 23 119 119 12 534 810 1540 2.65
132 315MA Siemens 4 1852 200 80 726 710 650 11 6 23 119 119 177 534 965 1695 2.87
160 315L Siemens 4 1852 200 80 726 710 650 11 6 23 119 119 177 534 1100 1830 2.87
55 250MC MMG-G 4 1580 200 80 590 545 502 9 6 23 119 119 114 534 480 1014 3.020
75 280SB MMG-G 4 1673 200 80 637 605 560 9 6 23 119 119 147 534 621 1155 3.294
90 280MB MMG-G 4 1673 200 80 637 605 560 9 6 23 119 119 197 534 706 1240 3.373
110 315SB MMG-G 4 1852 200 80 726 710 650 11 6 23 119 119 176 534 920 1454 4.437
132 315MB MMG-G 4 1852 200 80 726 710 650 11 6 23 119 119 226 534 1000 1534 4.533
160 315LB MMG-G 4 1852 200 80 726 710 650 11 6 23 119 119 326 534 1070 1604 4.727

65
12
Performance curves and technical data

LS 200-150-508

H
[m]
110 LS 200-150-508B
105
/508.0 50 Hz, n = 1490 min-1
100 ISO 9906 Grade 2B

95

90
/470.0
85

80

75 /431.8

70

65
/393.7
60

55

50 /355.6

45

40

35

30

25
NPSH
20 [m]
15 /508.0 12
/470.0
/431.8
10 /393.7 8
/355.6
5 4

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 Q [m³/h]
P2 Eta
[kW] [%]
360 90

320 80
/508.0
/431.8 /470.0
280 /393.7 70
/355.6
240 60

200 /508.0 50

160 /470.0 40

120 /431.8 30

80 /393.7 20
/355.6
TM07 2643 4018

40 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 Q [m³/h]

66
 12

Performance curves and technical data

LS 200-150-508 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-508 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
55 250M Siemens 4 995 995 546 53.98 432 483 291 291 660 957 981 65 4
75 280S Siemens 4 995 995 546 53.98 432 483 311 311 660 960 1024 75 5
90 280M Siemens 4 995 995 546 53.98 432 483 311 311 660 1070 1024 75 5
110 315S Siemens 4 995 995 546 53.98 432 483 371 371 660 1102 1166 80 5
132 315MA Siemens 4 995 995 546 53.98 432 483 371 371 660 1262 1166 80 5
160 315L Siemens 4 995 995 546 53.98 432 483 371 371 660 1262 1166 80 5
200 315L Siemens 4 995 995 546 53.98 432 483 371 371 660 1402 1166 80 5
250 315L Siemens 4 995 995 546 53.98 432 483 291 291 660 1410 1071 85 5
55 250MC MMG-G 4 995 995 546 53.98 432 483 311 311 660 921 991 65 4
75 280SB MMG-G 4 995 995 546 53.98 432 483 311 311 660 1037.5 1024 75 5
90 280MB MMG-G 4 995 995 546 53.98 432 483 311 311 660 1087.5 1024 75 5
110 315SB MMG-G 4 995 995 546 53.98 432 483 371 371 660 1246 1179 80 5
132 315MB MMG-G 4 995 995 546 53.98 432 483 371 371 660 1296 1179 80 5
160 315LB MMG-G 4 995 995 546 53.98 432 483 371 371 660 1396 1179 80 5
200 315LC MMG-G 4 995 995 546 53.98 432 483 371 371 660 1396 1179 80 5
250 355MB MMG-G 4 995 995 546 53.98 432 483 371 371 660 1605 1296 100 5

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
55 250M Siemens 4 1640 200 80 620 555 511 8.5 6 18 169 169 77 545 460 1131 2.51
75 280S Siemens 4 1750 200 80 675 605 577 9 6 23 169 169 41 545 575 1259 2.71
90 280M Siemens 4 1750 200 80 675 605 577 9 6 23 169 169 151 545 675 1359 2.84
110 315S Siemens 4 1980 200 80 790 725 665 11 6 23 169 169 - 545 810 1564 3.32
132 315MA Siemens 4 1980 200 80 790 725 665 11 6 23 169 169 98 545 965 1719 3.45
160 315L Siemens 4 1980 200 80 790 725 665 11 6 23 169 169 98 545 1100 1854 3.45
200 315L Siemens 4 1980 200 80 790 725 665 11 6 23 169 169 98 545 1300 2054 3.45
250 315L Siemens 4 2000 200 80 800 725 681 8.5 6 18 169 169 78 545 1300 2079 3.19
55 250MC MMG-G 4 1640 200 80 620 555 511 8.5 6 18 169 169 111 545 480 1025 3.372
75 280SB MMG-G 4 1750 200 80 675 605 577 9 6 23 169 169 119 545 621 1166 4.051
90 280MB MMG-G 4 1750 200 80 675 605 577 9 6 23 169 169 169 545 706 1251 4.143
110 315SB MMG-G 4 1980 200 80 790 725 665 11 6 23 169 169 97 545 920 1465 4.886
132 315MB MMG-G 4 1980 200 80 790 725 665 11 6 23 169 169 147 545 1000 1545 4.988
160 315LB MMG-G 4 1980 200 80 790 725 665 11 6 23 169 169 247 545 1070 1615 5.192
200 315LC MMG-G 4 1980 200 80 790 725 665 11 6 23 169 169 247 545 1260 1805 5.192
250 355MB MMG-G 4 2140 200 80 870 800 738 10.5 6 18 169 169 296 545 1820 2365 6.012

67
12
Performance curves and technical data

LS 250-200-305

H
[m]
36 LS 250-200-305C
/304.8
50 Hz, n = 1490 min-1
34
ISO 9906 Grade 2B
32

30
/279.4
28

26

24 /254.0

22

20
/228.6
18

16
/203.2
14

12

10
NPSH
8
[m]
6 15
/203.2 /228.6
/254.0
4 /279.4 10
/304.8
2 5

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]
P2 Eta
[kW] [%]
90 90

80 /304.8 80
/279.4
70 /254.0 70
/228.6
/203.2
60 60

50 /304.8 50

40 40
/279.4
30 30
/254.0
20 20
/228.6
TM07 2645 4018

/203.2
10 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]

68
 12

Performance curves and technical data

LS 250-200-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 250-200-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
15 160LB MG 4 929 929 508 44.45 406 432 311 311 580 655 875 42 3
18.5 180M Siemens 4 929 929 508 44.45 406 432 311 311 580 712 844 48 4
22 180L Siemens 4 929 929 508 44.45 406 432 311 311 580 712 844 48 4
30 200L Siemens 4 929 929 508 44.45 406 432 311 311 580 769 953 55 4
37 225S Siemens 4 929 929 508 44.45 406 432 311 311 580 789 916 60 7
45 225M Siemens 4 929 929 508 44.45 406 432 311 311 580 849 916 60 7
55 250M Siemens 4 929 929 508 44.45 406 432 311 311 580 957 988 65 7
15 160L MMG-G 4 929 929 508 44.45 406 432 311 311 580 652 819 42 3
18.5 180M MMG-G 4 929 929 508 44.45 406 432 311 311 580 672 845 48 4
22 180L MMG-G 4 929 929 508 44.45 406 432 311 311 580 710 845 48 4
30 200L MMG-G 4 929 929 508 44.45 406 432 311 311 580 770 910 55 4
37 225SC MMG-G 4 929 929 508 44.45 406 432 311 311 580 816 936 60 7
45 225MC MMG-G 4 929 929 508 44.45 406 432 311 311 580 841 936 60 7
55 250MC MMG-G 4 929 929 508 44.45 406 432 311 311 580 921 978 65 7

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
15 160LB MG 4 1420 200 100 510 360 298 11 6 23 121 121 46 511 115 724 1.95
18.5 180M Siemens 4 1460 200 100 530 390 346 8.5 6 18 121 121 20 511 126 737 1.82
22 180L Siemens 4 1460 200 100 530 390 346 8.5 6 18 121 121 50 511 146 757 1.85
30 200L Siemens 4 1500 200 100 550 425 363 11 6 23 121 121 58 511 200 814 2.03
37 225S Siemens 4 1550 200 100 575 495 452 9 6 23 121 121 52 511 290 917 2.03
45 225M Siemens 4 1550 200 100 575 495 452 9 6 23 121 121 112 511 330 957 2.09
55 250M Siemens 4 1630 200 100 615 545 500 9 6 23 121 121 71 511 460 1101 2.28
15 160L MMG-G 4 1420 200 100 510 360 298 11 6 23 121 121 43 511 150 661 2.449
18.5 180M MMG-G 4 1460 200 100 530 390 346 8.5 6 18 121 121 24 511 195 706 2.479
22 180L MMG-G 4 1460 200 100 530 390 346 8.5 6 18 121 121 62 511 205 716 2.532
30 200L MMG-G 4 1500 200 100 550 425 363 11 6 23 121 121 82 511 285 796 2.657
37 225SC MMG-G 4 1550 200 100 575 495 452 9 6 23 121 121 81 511 350 861 2.783
45 225MC MMG-G 4 1550 200 100 575 495 452 9 6 23 121 121 106 511 360 871 2.820
55 250MC MMG-G 4 1630 200 100 615 545 500 9 6 23 121 121 106 511 480 991 3.033

69
12
Performance curves and technical data

LS 250-200-381

H
[m]
56
LS 250-200-381B
/381.0 50 Hz, n = 1490 min-1
52 ISO 9906 Grade 2B

48 /355.6

44

40 /330.2

36
/304.8

32

/280.0
28

24

20

16 NPSH
[m]
12 12

/330.2 /355.6 /381.0

8 /304.8 8
/280.0

4 4

0 0
0 100 200 300 400 500 600 700 800 900 Q [m³/h]
P2 Eta
[kW] [%]
180 90
/381.0
160 /330.2 /355.6 80
/280.0 /304.8
140 70

120 60
/381.0
100 50
/355.6
80 40
/330.2
60 30
/304.8
40 /280.0 20
TM07 2647 4018

20 10

0 0
0 100 200 300 400 500 600 700 800 900 Q [m³/h]

70
 12

Performance curves and technical data

LS 250-200-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 250-200-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
30 200L Siemens 4 949 949 518 44.45 483 483 318 318 655 769 918 55 4
37 225S Siemens 4 949 949 518 44.45 483 483 318 318 655 789 1021 60 7
45 225M Siemens 4 949 949 518 44.45 483 483 318 318 655 849 1021 60 7
55 250M Siemens 4 949 949 518 44.45 483 483 318 318 655 957 1013 65 7
75 280S Siemens 4 949 949 518 44.45 483 483 318 318 655 960 1056 75 17
90 280M Siemens 4 949 949 518 44.45 483 483 318 318 655 1070 1056 75 17
110 315S Siemens 4 949 949 518 44.45 483 483 378 378 655 1102 1198 80 17
132 315MA Siemens 4 949 949 518 44.45 483 483 378 378 655 1262 1198 80 17
160 315L Siemens 4 949 949 518 44.45 483 483 378 378 655 1262 1198 80 17
30 200L MMG-G 4 949 949 518 44.45 483 483 318 318 655 770 955 55 4
37 225SC MMG-G 4 949 949 518 44.45 483 483 318 318 655 816 981 60 7
45 225MC MMG-G 4 949 949 518 44.45 483 483 318 318 655 841 981 60 7
55 250MC MMG-G 4 949 949 518 44.45 483 483 318 318 655 921 1023 65 7
75 280SB MMG-G 4 949 949 518 44.45 483 483 318 318 655 1037.5 1056 75 17
90 280MB MMG-G 4 949 949 518 44.45 483 483 318 318 655 1087.5 1056 75 17
110 315SB MMG-G 4 949 949 518 44.45 483 483 378 378 655 1246 1211 80 17
132 315MB MMG-G 4 949 949 518 44.45 483 483 378 378 655 1296 1211 80 17
160 315LB MMG-G 4 949 949 518 44.45 483 483 378 378 655 1396 1211 80 17

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
30 200L Siemens 4 1560 200 150 580 425 381 8.5 6 18 81 81 58 568 200 882 2.30
37 225S Siemens 4 1620 200 150 610 465 403 11 6 23 81 81 42 568 290 981 2.57
45 225M Siemens 4 1620 200 150 610 465 403 11 6 23 81 81 102 568 330 1021 2.65
55 250M Siemens 4 1690 200 150 645 555 511 8.5 6 18 81 81 71 568 460 1164 2.65
75 280S Siemens 4 1780 200 150 690 605 577 9 6 23 81 81 64 568 575 1301 2.86
90 280M Siemens 4 1780 200 150 690 605 577 9 6 23 81 81 174 568 675 1401 3.01
110 315S Siemens 4 1950 200 150 775 710 650 11 6 23 81 81 16 568 810 1597 3.40
132 315MA Siemens 4 1950 200 150 775 710 650 11 6 23 81 81 181 568 965 1752 3.65
160 315L Siemens 4 1950 200 150 775 710 650 11 6 23 81 81 181 568 1100 1887 3.65
30 200L MMG-G 4 1560 200 150 580 425 381 8.5 6 18 81 81 82 568 285 853 3.138
37 225SC MMG-G 4 1620 200 150 610 465 403 11 6 23 81 81 71 568 350 918 3.238
45 225MC MMG-G 4 1620 200 150 610 465 403 11 6 23 81 81 96 568 360 928 3.280
55 250MC MMG-G 4 1690 200 150 645 555 511 8.5 6 18 81 81 106 568 480 1048 3.523
75 280SB MMG-G 4 1780 200 150 690 605 577 9 6 23 81 81 142 568 621 1189 4.241
90 280MB MMG-G 4 1780 200 150 690 605 577 9 6 23 81 81 192 568 706 1274 4.340
110 315SB MMG-G 4 1950 200 150 775 710 650 11 6 23 81 81 181 568 920 1488 5.114
132 315MB MMG-G 4 1950 200 150 775 710 650 11 6 23 81 81 231 568 1000 1568 5.222
160 315LB MMG-G 4 1950 200 150 775 710 650 11 6 23 81 81 331 568 1070 1638 5.439

71
12
Performance curves and technical data

LS 300-200-489

H
[m]
95 LS 300-200-489C
90 /489.0 50 Hz, n = 1490 min-1
ISO 9906 Grade 2B
85

80
/457.2
75

70

65
/406.4
60

55 /381.0

50
/355.6
45

40

35

30

25
NPSH
20
[m]
15 12
/457.2 /489.0
/355.6 /381.0 /406.4
10 8

5 4

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 Q [m³/h]
P2 Eta
[kW] [%]
360 90

320 80
/457.2 /489.0
/406.4
280 /355.6 /381.0 /489.0 70

240 60
/457.2
200 50

160 40
/406.4
120 /381.0 30
/355.6
80 20
TM07 2649 4018

40 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 Q [m³/h]

72
 12

Performance curves and technical data

LS 300-200-489 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-200-489 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
110 315S Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1102 1244 80 4
132 315MA Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1262 1244 80 4
160 315L Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1262 1244 80 4
200 315L Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1402 1244 80 4
250 315L Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1410 1149 85 4
315 315L Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1400 1149 85 4
355 355L Siemens 4 1306 1306 723 63.5 414 559 398 398 745 1835 1426 95 4
110 315SB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1246 1257 80 4
132 315MB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1296 1257 80 4
160 315LB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1396 1257 80 4
200 315LC MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1396 1257 80 4
250 355MB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1605 1374 100 4
315 355LB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1605 1374 100 4
355 355CB MMG-G 4 1306 1306 723 63.5 414 559 398 398 745 1795 1374 100 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
110 315S Siemens 4 2150 200 150 875 700 638 11 6 18 233 233 28 727 810 1773 4.12
132 315MA Siemens 4 2150 200 150 875 700 638 11 6 18 233 233 188 727 965 1928 4.37
160 315L Siemens 4 2150 200 150 875 700 638 11 6 18 233 233 188 727 1100 2063 4.37
200 315L Siemens 4 2150 200 150 875 700 638 11 6 18 233 233 328 727 1300 2263 4.59
250 315L Siemens 4 2200 200 150 900 725 681 8.5 6 18 233 233 236 727 1300 2293 4.28
315 315L Siemens 4 2200 200 150 900 725 681 8.5 6 18 233 233 226 727 1300 2293 4.28
355 355L Siemens 4 2450 200 150 1025 850 788 11 6 23 233 233 461 727 1900 2964 4.63
110 315SB MMG-G 4 2150 200 150 875 700 638 11 6 18 233 233 173 727 920 1647 6.051
132 315MB MMG-G 4 2150 200 150 875 700 638 11 6 18 233 233 223 727 1000 1727 6.163
160 315LB MMG-G 4 2150 200 150 875 700 638 11 6 18 233 233 323 727 1070 1797 6.386
200 315LC MMG-G 4 2150 200 150 875 700 638 11 6 18 233 233 323 727 1260 1987 6.386
250 355MB MMG-G 4 2460 200 150 1030 827 681 8.5 6 18 233 233 222 727 1820 2547 7.312
315 355LB MMG-G 4 2460 200 150 1030 827 765 10.5 6 18 233 233 222 727 2150 2877 7.312
355 355CB MMG-G 4 2750 200 150 1175 850 788 11 6 23 233 233 122 727 2300 3027 7.832

73
12
Performance curves and technical data

LS 300-250-305

H
[m]
34
/304.8
LS 300-250-305E
50 Hz, n = 1480 min-1
32
ISO 9906 Grade 2B

30

28 /279.4

26

24
/254.0
22
/236.2
20

18

16
/211.0
14

12

10

8
NPSH
[m]
6 12
/211.0 /236.2 /254.0 /279.4
4 /304.8 8

2 4

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]
P2 Eta
[kW] [%]
180 90

160 80
/304.8
/279.4
140 /236.2 /254.0 70

120 /211.0 60

100 50

80 40
/304.8
60 30
/279.4
40 20
/254.0
TM07 2625 4018

/236.2
20 /211.0 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]

74
 12

Performance curves and technical data

LS 300-250-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-250-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
30 200L Siemens 4 974 974 530 44.45 495 495 343 343 645 769 958 55 4
37 225S Siemens 4 974 974 530 44.45 495 495 343 343 645 789 981 60 6
45 225M Siemens 4 974 974 530 44.45 495 495 343 343 645 849 981 60 6
55 250M Siemens 4 974 974 530 44.45 495 495 343 343 645 957 1053 65 6
75 280S Siemens 4 974 974 530 44.45 495 495 343 343 645 960 1076 75 16
90 280M Siemens 4 974 974 530 44.45 495 495 343 343 645 1070 1076 75 16
30 200L MMG-G 4 974 974 530 44.45 495 495 343 343 645 770 975 55 4
37 225SC MMG-G 4 974 974 530 44.45 495 495 343 343 645 816 1001 60 6
45 225MC MMG-G 4 974 974 530 44.45 495 495 343 343 645 841 1001 60 6
55 250MC MMG-G 4 974 974 530 44.45 495 495 343 343 645 921 1043 65 6
75 280SB MMG-G 4 974 974 530 44.45 495 495 343 343 645 1037.5 1076 75 16
90 280MB MMG-G 4 974 974 530 44.45 495 495 343 343 645 1087.5 1076 75 16

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
30 200L Siemens 4 1570 200 150 585 420 372 9 6 18 94 94 60 727 200 1044 0.41
37 225S Siemens 4 1650 200 150 625 465 417 9 6 18 94 94 25 636 290 1054 2.51
45 225M Siemens 4 1650 200 150 625 465 417 9 6 18 94 94 85 636 330 1094 2.59
55 250M Siemens 4 1720 200 150 660 526 472 9 6 23 94 94 54 636 460 1247 2.84
75 280S Siemens 4 1800 200 150 700 575 528 9 6 23 94 94 57 636 575 1371 3.01
90 280M Siemens 4 1800 200 150 700 575 528 9 6 23 94 94 167 636 675 1471 3.16
30 200L MMG-G 4 1570 200 150 585 420 372 9 6 18 94 94 84 727 285 1012 3.276
37 225SC MMG-G 4 1650 200 150 625 465 417 9 6 18 94 94 52 636 350 986 3.392
45 225MC MMG-G 4 1650 200 150 625 465 417 9 6 18 94 94 77 636 360 996 3.436
55 250MC MMG-G 4 1720 200 150 660 526 472 9 6 23 94 94 87 636 480 1116 3.686
75 280SB MMG-G 4 1800 200 150 700 575 528 9 6 23 94 94 134 636 621 1257 4.428
90 280MB MMG-G 4 1800 200 150 700 575 528 9 6 23 94 94 184 636 706 1342 4.529

75
12
Performance curves and technical data

LS 300-250-381

H
[m]
LS 300-250-381B
60
50 Hz, n = 1490 min-1
/390.0 ISO 9906 Grade 2B
55

50

/355.6
45

40 /330.2

35
/304.8

30
/279.4

25

20
NPSH
[m]
15 15

10 /279.4 /304.8 /330.2 10

/355.6 /390.0

5 5

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 Q [m³/h]
P2 Eta
[kW] [%]
225 90

200 /330.2 /355.6 /390.0 80

/304.8
175 70
/279.4 /390.0
150 60

125 50
/355.6
100 40
/330.2
75 /304.8 30

50 /279.4 20
TM07 2652 4018

25 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 Q [m³/h]

76
 12

Performance curves and technical data

LS 300-250-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-250-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
55 250M Siemens 4 1051 1051 600 57.15 432 584 394 394 630 957 1058 65 4
75 280S Siemens 4 1051 1051 600 57.15 432 584 454 454 630 960 1141 75 4
90 280M Siemens 4 1051 1051 600 57.15 432 584 454 454 630 1070 1141 75 4
110 315S Siemens 4 1051 1051 600 57.15 432 584 434 434 630 1102 1203 80 4
132 315MA Siemens 4 1051 1051 600 57.15 432 584 434 434 630 1262 1203 80 4
160 315L Siemens 4 1051 1051 600 57.15 432 584 434 434 630 1262 1203 80 4
200 315L Siemens 4 1051 1051 600 57.15 432 584 434 434 630 1402 1203 80 4
55 250MC MMG-G 4 1051 1051 600 57.15 432 584 394 394 630 921 1048 65 4
75 280SB MMG-G 4 1051 1051 600 57.15 432 584 454 454 630 1037.5 1141 75 4
90 280MB MMG-G 4 1051 1051 600 57.15 432 584 454 454 630 1087.5 1141 75 4
110 315SB MMG-G 4 1051 1051 600 57.15 432 584 434 434 630 1246 1216 80 4
132 315MB MMG-G 4 1051 1051 600 57.15 432 584 434 434 630 1296 1216 80 4
160 315LB MMG-G 4 1051 1051 600 57.15 432 584 434 434 630 1396 1216 80 4
200 315LC MMG-G 4 1051 1051 600 57.15 432 584 434 434 630 1396 1216 80 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
55 250M Siemens 4 1700 200 80 650 560 512 9 6 18 171 171 71 991 460 1591 3.02
75 280S Siemens 4 1800 200 80 700 600 538 11 6 23 171 171 44 991 575 1764 3.34
90 280M Siemens 4 1800 200 80 700 600 538 11 6 23 171 171 154 991 675 1864 3.51
110 315S Siemens 4 1960 200 80 780 632 632 10.5 6 23 171 171 6 991 810 2017 3.70
132 315MA Siemens 4 1960 200 80 780 632 632 10.5 6 23 171 171 171 991 965 2172 3.96
160 315L Siemens 4 1960 200 80 780 632 632 10.5 6 23 171 171 171 991 1100 2307 3.96
200 315L Siemens 4 1960 200 80 780 632 632 10.5 6 23 171 171 171 991 1300 2507 3.96
55 250MC MMG-G 4 1700 200 80 650 560 512 9 6 18 171 171 105 991 480 1471 3.911
75 280SB MMG-G 4 1800 200 80 700 600 538 11 6 23 171 171 121 991 621 1612 4.842
90 280MB MMG-G 4 1800 200 80 700 600 538 11 6 23 171 171 171 991 706 1697 4.950
110 315SB MMG-G 4 1960 200 80 780 670 620 10.5 6 23 171 171 170 991 920 1911 5.533
132 315MB MMG-G 4 1960 200 80 780 632 632 10.5 6 23 171 171 220 991 1000 1991 5.646
160 315LB MMG-G 4 1960 200 80 780 632 632 10.5 6 23 171 171 320 991 1070 2061 5.871
200 315LC MMG-G 4 1960 200 80 780 632 632 10.5 6 23 171 171 320 991 1260 2251 5.871

77
12
Performance curves and technical data

LS 350-250-498

H
[m]
95 LS 350-250-498C
/498.0
90 50 Hz, n = 1490 min-1
ISO 9906 Grade 2B
85

80
/457.0
75

70

65

60 /406.4

55

50

45 /355.6

40

35

30

25
NPSH
20
[m]
15 12
/355.6 /406.4 /457.0 /498.0
10 8

5 4

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 Q [m³/h]
P2 Eta
[kW] [%]
900 90
/498.0
/457.0
800 80
/406.4
/355.6
700 70

600 60

500 50

400 40
/498.0
300 /457.0 30

200 /406.4 20
TM07 2682 4018

100 /355.6 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600 1700 Q [m³/h]

78
 12

Performance curves and technical data

LS 350-250-498 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 350-250-498 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
160 315L Siemens 4 1403 1403 797 79.38 508 660 446 446 785 1262 1301 80 4
200 315L Siemens 4 1403 1403 797 79.38 508 660 446 446 785 1402 1301 80 4
250 315L Siemens 4 1403 1403 797 79.38 508 660 426 426 785 1410 1266 85 4
315 315L Siemens 4 1403 1403 797 79.38 508 660 426 426 785 1400 1266 85 4
355 355L Siemens 4 1403 1403 797 79.38 508 660 446 446 785 1835 1483 95 20
400 355L Siemens 4 1403 1403 797 79.38 508 660 446 446 785 1635 1191 95 5
500 355L Siemens 4 1403 1403 797 79.38 508 660 446 446 785 1835 1200 95 5
160 315LB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1396 1314 80 4
200 315LC MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1396 1314 80 4
250 355MB MMG-G 4 1403 1403 797 79.38 508 660 426 426 785 1605 1411 100 4
315 355LB MMG-G 4 1403 1403 797 79.38 508 660 426 426 785 1605 1411 100 4
355 355CB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1795 1431 100 4
400 315DB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1841 1452 95 3
425 355CB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1894 1548 95 3
450 355CB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1894 1548 95 3
475 355CB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1894 1548 95 3
500 355CB MMG-G 4 1403 1403 797 79.38 508 660 446 446 785 1894 1548 95 3

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
160 315L Siemens 4 2200 200 150 900 680 620 11 6 23 256 256 198 1436 1100 2823 5.47
200 315L Siemens 4 2200 200 150 900 680 620 11 6 23 256 256 198 1436 1300 3023 5.47
250 315L Siemens 4 2310 200 150 955 720 663 10.5 6 23 256 256 360 1436 1300 3048 5.64
315 315L Siemens 4 2310 200 150 955 720 663 10.5 6 23 256 256 350 1436 1500 3248 5.62
355 355L Siemens 4 2570 200 150 1085 815 760 11 6 23 256 256 415 1436 1900 3718 7.45
400 355L Siemens 4 2570 200 150 1085 815 760 11 6 23 256 256 215 1436 2000 3818 5.90
500 355L Siemens 4 2570 200 150 1085 815 760 11 6 23 256 256 417 1436 2200 4018 6.27
160 315LB MMG-G 4 2300 250 100 900 680 620 11 6 23 256 256 247 1436 1070 2506 7.861
200 315LC MMG-G 4 2300 250 100 900 680 620 11 6 23 256 256 247 1436 1260 2696 7.861
250 355MB MMG-G 4 2510 200 150 1055 820 762.5 10.5 6 23 256 256 246 1436 1820 3256 8.870
315 355LB MMG-G 4 2510 200 150 1055 820 762.5 10.5 6 23 256 256 246 1436 2150 3586 8.870
355 355CB MMG-G 4 2850 340 10 1085 815 760 11 6 23 256 256 96 1436 2300 3736 9.502
400 315DB MMG-G 4 2650 200 148 1125 705 637 11 6 18 258 258 339 1436 2180 3616 9.734
425 355CB MMG-G 4 2700 200 148 1150 825 757 11 6 18 258 258 342 1436 2450 3886 10.372
450 355CB MMG-G 4 2700 200 148 1150 825 757 11 6 18 258 258 342 1436 2610 4046 10.372
475 355CB MMG-G 4 2700 200 148 1150 825 757 11 6 18 258 258 342 1436 2610 4046 10.372
500 355CB MMG-G 4 2700 200 148 1150 825 757 11 6 18 258 258 342 1436 2700 4136 10.372

79
12
Performance curves and technical data

LS 350-250-630

H
[m]
160 LS 350-250-630B
/630.0
50 Hz, n = 1490 min-1
150 ISO 9906 Grade 2B

140

130 /580.0

120

110 /532.0

100

90 /483.0

80

70 /432.0

60

50

40 NPSH
[m]
30 /630.0 12
/580.0
/532.0
20 /483.0 8

10 /432.0 4

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Q [m³/h]
P2 Eta
[kW] [%]
1800 90

1600 80
/630.0
/483.0 /532.0 /580.0
1400 /432.0 70

1200 60

1000 50

800 /630.0 40

600 /580.0 30

400 /532.0 20
/483.0
TM07 2684 4018

200 /432.0 10

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Q [m³/h]

80
 12

Performance curves and technical data

LS 350-250-630 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 350-250-630 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
250 315L Siemens 4 1377 1377 799 79.38 610 711 505 505 820 1410 1335 85 4
315 315L Siemens 4 1377 1377 799 79.38 610 711 505 505 820 1400 1335 85 4
355 355L Siemens 4 1377 1377 799 79.38 610 711 485 485 820 1835 1512 95 4
400 355L Siemens 4 1377 1377 799 79.38 610 711 485 485 820 1635 1171 95 5
500 355L Siemens 4 1377 1377 799 79.38 610 711 485 485 820 1835 1180 95 5
560 355L Siemens 4 1377 1377 799 79.38 610 711 505 505 820 1835 1265 110 5
630 355L Siemens 4 1377 1377 799 79.38 610 711 505 505 820 1835 865 110 5
250 355MB MMG-G 4 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
315 355LB MMG-G 4 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
355 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1795 1460 100 4
400 315DB MMG-G 4 1377 1377 799 79.38 610 711 505 505 820 1841 1501 95 3
425 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1894 1577 95 4
450 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1894 1577 95 4
475 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1894 1577 95 4
500 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1894 1577 95 4
530 355CB MMG-G 4 1377 1377 799 79.38 610 711 485 485 820 1894 1577 95 4
560 400CB MMG-G 4 1377 1377 799 79.38 610 711 505 505 820 2080 1609 110 6
600 400CB MMG-G 4 1377 1377 799 79.38 610 711 505 505 820 2080 1609 110 6

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
250 315L Siemens 4 2310 200 150 955 724 656 11 6 23 228 228 252 1905 1300 3522 6.53
315 315L Siemens 4 2310 200 150 955 724 656 11 6 23 228 228 242 1905 1500 3722 6.50
355 355L Siemens 4 2570 200 150 1085 835 778 10.5 6 23 228 228 417 1905 1900 4149 8.37
400 355L Siemens 4 2570 200 150 1085 835 778 10.5 6 23 228 228 217 1905 2000 4249 6.87
500 355L Siemens 4 2570 200 150 1085 835 778 10.5 6 23 228 228 419 1905 2200 4449 7.30
560 355L Siemens 4 2710 200 150 1155 906 844 11 6 23 228 228 279 1905 2800 5106 7.41
630 355L Siemens 4 2710 200 150 1155 906 844 11 6 23 228 228 279 1905 3000 5306 7.41
250 355MB MMG-G 4 2550 320 30 955 790 740 11 6 23 228 228 208 1905 1820 3725 10.065
315 355LB MMG-G 4 2550 320 30 955 790 740 11 6 23 228 228 208 1905 2150 4055 10.065
355 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 178 1905 2300 4205 10.566
400 315DB MMG-G 4 2650 200 148 1125 747 679 10.5 6 18 230 230 341 1905 2180 4085 10.934
425 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 277 1905 2450 4355 11.531
450 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 277 1905 2610 4515 11.531
475 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 277 1905 2610 4515 11.531
500 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 277 1905 2700 4605 11.531
530 355CB MMG-G 4 2770 200 150 1185 835 777.5 10.5 6 23 228 228 277 1905 2800 4705 11.531
560 400CB MMG-G 4 2890 200 148 1245 865 797 10.5 6 18 230 230 343 1905 3260 5165 12.352
600 400CB MMG-G 4 2890 200 148 1245 865 797 10.5 6 18 230 230 343 1905 3430 5335 12.352

81
12
Performance curves and technical data

LS 450-350-397
H
[m]
LS 450-350-397B
60
50 Hz, n = 1490 min-1
/397.0
ISO 9906 Grade 2B
55

/377.0
50

/357.0
45

/337.0
40
/322.4

35

30

25

20
NPSH
[m]
15 12

10 /337.0 /357.0 /377.0 8

/322.4 /397.0

5 4

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Q [m³/h]
P2 Eta
[kW] [%]
360 90
/397.0
320 /377.0 80
/322.4 /337.0 /357.0
280 70

240 60

200 50
/397.0
160 40
/377.0
120 /357.0 30
/337.0
80 /322.4 20
TM07 2687 4018

40 10

0 0
0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 Q [m³/h]

82
 12

Performance curves and technical data

LS 450-350-397 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 450-350-397 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
110 315S Siemens 4 1400 1400 773.5 63.5 545 625 485 485 730 1102 1385 80 4
132 315MA Siemens 4 1400 1400 773.5 63.5 545 625 485 485 730 1262 1385 80 4
160 315L Siemens 4 1400 1400 773.5 63.5 545 625 485 485 730 1262 1385 80 4
200 315L Siemens 4 1400 1400 773.5 63.5 545 625 485 485 730 1402 1385 80 4
250 315L Siemens 4 1400 1400 773.5 63.5 545 625 485 485 730 1410 1370 85 4
110 315SB MMG-G 4 1400 1400 773.5 63.5 545 625 485 485 730 1246 1378 80 4
132 315MB MMG-G 4 1400 1400 773.5 63.5 545 625 485 485 730 1296 1378 80 4
160 315LB MMG-G 4 1400 1400 773.5 63.5 545 625 485 485 730 1396 1378 80 4
200 315LC MMG-G 4 1400 1400 773.5 63.5 545 625 485 485 730 1396 1378 80 4
250 355MB MMG-G 4 1400 1400 773.5 63.5 545 625 485 485 730 1605 1495 100 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
110 315S Siemens 4 2330 200 230 1016 805 755 11 6 23 146 146 - 1905 2000 4246 6.06
132 315MA Siemens 4 2330 200 230 1016 805 755 11 6 23 146 146 74 1905 2200 4446 6.22
160 315L Siemens 4 2330 200 230 1016 805 755 11 6 23 146 146 74 1905 2800 5046 6.51
200 315L Siemens 4 2330 200 230 1016 805 755 11 6 23 146 146 74 1905 3000 5246 6.51
250 315L Siemens 4 2330 200 230 1016 805 755 11 6 23 146 146 74 1460 1270 2730 5.60
110 315SB MMG-G 4 2330 200 228 965 805 754.5 11 6 23 199 199 121 1905 920 2825 7.727
132 315MB MMG-G 4 2330 200 228 965 805 754.5 11 6 23 199 199 171 1905 1000 2905 7.865
160 315LB MMG-G 4 2330 200 228 965 805 754.5 11 6 23 199 199 271 1905 1070 2975 8.141
200 315LC MMG-G 4 2330 200 228 965 805 754.5 11 6 23 199 199 271 1905 1260 3165 8.141
250 355MB MMG-G 4 2510 200 230 1055 805 749 11 6 23 197 197 303 1460 1820 3280 9.265

83
12
Performance curves and technical data

LS 125-100-370x2

H
[m]
LS 125-100-370Ax2
110 50 Hz, n = 1480 min-1
ISO 9906 Grade 2B
/375.0
100

90 /350.0

80 /330.0

70
/304.0

60
/279.4

50

40
NPSH
[m]
30 12

/350.0 /375.0
20 /330.0 8
/304.0
/279.4

10 4

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 Q [m³/h]
P2 Eta
[kW] [%]
160 80

/375.0
140 /350.0 70
/304.0 /330.0
/279.4
120 60

100 50

80 /375.0 40

60 /350.0 30
/330.0
40 /304.0 20
/279.4
TM07 2751 4118

20 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 Q [m³/h]

84
 12

Performance curves and technical data

LS 125-100-370x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 125-100-370x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
37 225SC MMG-G 4 980 540 44.45 340 350 280 565 816 848 60 4 2.329
45 225MC MMG-G 4 980 540 44.45 340 350 280 565 841 848 60 4 2.357
55 250MC MMG-G 4 980 540 44.45 340 350 280 565 921 890 65 4 2.526
75 280SB MMG-G 4 980 540 44.45 340 350 280 565 1037.5 923 75 12 3.070
90 280MB MMG-G 4 980 540 44.45 340 350 280 565 1087.5 923 75 12 3.141
110 315SB MMG-G 4 980 540 44.45 340 350 280 565 1246 1018 80 16 3.689

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
37 225SC MMG-G 4 1610 200 36.5 145 605 590 548 9 6 23 204 - 350 350 700
45 225MC MMG-G 4 1634 200 36.5 145 617 590 548 9 6 23 204 - 350 360 710
55 250SC MMG-G 4 1704 200 36.5 145 652 590 548 9 6 23 204 - 350 480 830
75 250MC MMG-G 4 1800 200 36.5 145 700 590 548 9 6 23 204 26 350 621 971
90 280SB MMG-G 4 1800 200 36.5 145 700 590 548 9 6 23 204 76 350 706 1056
110 280MB MMG-G 4 2041.5 200 36.5 145 820.75 715 673 9 6 23 204 - 350 920 1270

85
12
Performance curves and technical data

LS 150-125-415x2

H
[m]
LS 150-125-415Ax2
130
/415.0 50 Hz, n = 1480 min-1
ISO 9906 Grade 2B
120

/390.0
110

/370.0
100

90
/340.0

80

/310.0
70

60

50 NPSH
[m]
40 8

/370.0 /390.0 /415.0

30 /340.0 6
/310.0

20 4

10 2

0 0
0 40 80 120 160 200 240 280 320 360 Q [m³/h]
P2 Eta
[kW] [%]
160 80

140 /415.0 70
/340.0 /370.0 /390.0 /415.0
/310.0
120 60
/390.0
100 50
/370.0
80 40
/340.0
60 30
/310.0
40 20
TM07 2755 4118

20 10

0 0
0 40 80 120 160 200 240 280 320 360 Q [m³/h]

86
 12

Performance curves and technical data

LS 150-125-415x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 150-125-415x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
55 250MC MMG-G 4 1059 575 44.45 365 375 290 632 921 940 65 4 2.863
75 280SB MMG-G 4 1059 575 44.45 365 375 290 632 1037.5 973 75 9 3.455
90 280MB MMG-G 4 1059 575 44.45 365 375 290 632 1087.5 973 75 9 3.532
110 315SB MMG-G 4 1059 575 44.45 365 375 290 632 1246 1068 80 9 4.017
132 315MB MMG-G 4 1059 575 44.45 365 375 290 632 1296 1068 80 9 4.098
160 315LB MMG-G 4 1059 575 44.45 365 375 290 632 1396 1068 80 9 4.261

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
55 250MC MMG-G 4 1774 200 85 140 687 590 548 9 6 23 199 11 530 480 1010
75 280SB MMG-G 4 1876 200 85 140 738 650 608 9 6 23 199 31 530 621 1151
90 280MB MMG-G 4 1876 200 85 140 738 650 608 9 6 23 199 81 530 706 1236
110 315SB MMG-G 4 2095 200 85 140 847.5 730 688 9 6 23 199 20 530 920 1450
132 315MB MMG-G 4 2095 200 85 140 847.5 730 688 9 6 23 199 70 530 1000 1530
160 315LB MMG-G 4 2095 200 85 140 847.5 730 688 9 6 23 199 170 530 1070 1600

87
12
Performance curves and technical data

LS 200-150-475x2

H
[m]
170 LS 200-150-475Ax2
/475.0 50 Hz, n = 1480 min-1
160
ISO 9906 Grade 2B

150

/445.0
140

130

120 /415.0

110
/385.0
100

90 /355.0

80

70

60

50

40
NPSH
[m]
30 12
/445.0 /475.0
/415.0
20 /385.0 8
/355.0
10 4

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]
P2 Eta
[kW] [%]
320 80
/475.0
/415.0 /445.0
280 /385.0 70
/355.0 /475.0
240 60
/445.0
200 50

160 /415.0 40

120 /385.0 30
/355.0
80 20
TM07 2759 4118

40 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 Q [m³/h]

88
 12

Performance curves and technical data

LS 200-150-475x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-475x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
132 315MB MMG-G 4 1142 615 57.15 550 575 400 685 1296 1188 80 14 6.257
160 315LB MMG-G 4 1142 615 57.15 550 575 400 685 1396 1188 80 14 6.497
200 315LC MMG-G 4 1142 615 57.15 550 575 400 685 1396 1188 80 14 6.497
250 355MB MMG-G 4 1142 615 57.15 550 575 400 685 1605 1305 100 43 7.688
315 355LB MMG-G 4 1142 615 57.15 550 575 400 685 1605 1305 100 43 7.688

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
132 315MB MMG-G 4 2178 200 130 130 889 830 786 9.5 6 23 197 77 960 1000 1960
160 315LB MMG-G 4 2178 200 130 130 889 830 786 9.5 6 23 197 177 960 1070 2030
200 315LC MMG-G 4 2178 200 130 130 889 830 786 9.5 6 23 197 177 960 1260 2220
250 355MB MMG-G 4 2642 200 130 130 1121 830 786 9.5 6 23 197 - 960 1820 2780
315 355LB MMG-G 4 2642 200 130 130 1121 830 786 9.5 6 23 197 - 960 2150 3110

89
12
Performance curves and technical data

LS 250-200-575x2

H
[m]
LS 250-200-575Ax2
240 /575.0
50 Hz, n = 1490 min-1
ISO 9906 Grade 2B
220
/535.0
200

180 /495.0

160
/455.0

140

/415.0
120

100

80
NPSH
[m]
60 12
/535.0 /575.0
/495.0
40 /455.0 8
/415.0

20 4

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]
P2 Eta
[kW] [%]
900 80
/575.0
800 /495.0 /535.0 70
/455.0
700 /415.0 /575.0 60

600 50
/535.0
500 40
/495.0
400 30
/455.0
300 20
/415.0
TM07 2763 4118

200 10

100 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]

90
 12

Performance curves and technical data

LS 250-200-575x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 250-200-575x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
250 355MB MMG-G 4 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
315 355LB MMG-G 4 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
355 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1795 1445 100 19 11.138
400 315DBB MMG-G 4 1496 800 79.38 600 750 490 850 1841 1466 95 5 11.362
425 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1894 1562 95 10 12.115
450 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1894 1562 95 10 12.115
475 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1894 1562 95 10 12.115
500 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1894 1562 95 10 12.115
530 355CB MMG-G 4 1496 800 79.38 600 750 490 850 1894 1562 95 10 12.115
560 400CB MMG-G 4 1496 800 79.38 600 750 490 850 2080 1574 110 19 12.855
600 400CB MMG-G 4 1496 800 79.38 600 750 490 850 2080 1574 110 19 12.855

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
250 355MB MMG-G 4 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 1820 3272
315 355LB MMG-G 4 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 2150 3602
355 355CB MMG-G 4 2878 200 190 150 1239 1210 1158 10.5 6 23 306 126 1452 2300 3752
400 315DBB MMG-G 4 2772 200 190 150 1186 1210 1158 10.5 6 23 306 264 1452 2180 3632
425 355CB MMG-G 4 2826 200 190 150 1239 1210 1158 10.5 6 23 306 268 1452 2450 3902
450 355CB MMG-G 4 2826 200 190 150 1239 1210 1158 10.5 6 23 306 268 1452 2610 4062
475 355CB MMG-G 4 2826 200 190 150 1239 1210 1158 10.5 6 23 306 268 1452 2610 4062
500 355CB MMG-G 4 2826 200 190 150 1239 1210 1158 10.5 6 23 306 268 1452 2700 4152
530 355CB MMG-G 4 2826 200 190 150 1239 1210 1158 10.5 6 23 306 268 1452 2800 4252
560 400CB MMG-G 4 3016 200 190 150 1308 1210 1158 10.5 6 23 306 273 1452 3260 4712
600 400CB MMG-G 4 3016 200 190 150 1308 1210 1158 10.5 6 23 306 273 1452 3430 4882

91
12
Performance curves and technical data

6-pole
LS 150-125-381

H
[m]
LS 150-125-381F
26
50 Hz, n = 980 min-1
/381.0 ISO 9906 Grade 2B
24

22
/355.6
20

18 /330.6

16
/304.8

14
/279.4
12

10

8 NPSH
[m]
6 6

/304.8 /330.6 /355.6

4 /279.4 /381.0 4

2 2

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [m³/h]
P2 Eta
[kW] [%]
36 90
/381.0
32 /355.6 80
/304.8 /330.6
28 /279.4 70

24 60

20 50
/381.0
16 40
/355.6
12 30
/330.6
8 /304.8 20
/279.4
TM07 2636 4018

4 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 Q [m³/h]

92
 12

Performance curves and technical data

LS 200-150-305

H
[m]
16 LS 200-150-305C
50 Hz, n = 980 min-1
15 /304.8 ISO 9906 Grade 2B

14

13
/279.4
12

11

/254.0
10

/229.0
8

7
/203.2
6

3 NPSH
[m]
2 4
/203.2 /229.0 /254.0 /279.4 /304.8
1 2

0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 Q [m³/h]
P2 Eta
[kW] [%]
18 90

16 80
/279.4 /304.8
14 /229.0 /254.0 70

12 /203.2 60
/304.8
10 50

8 /279.4 40

6 /254.0 30

4 /229.0 20
TM07 2638 4018

/203.2
2 10

0 0
0 25 50 75 100 125 150 175 200 225 250 275 300 325 350 Q [m³/h]

93
12
Performance curves and technical data

LS 200-150-381

H
[m]
LS 200-150-381A
26
50 Hz, n = 980 min-1
/381.0 ISO 9906 Grade 2B
24

22
/356.0
20

18 /330.0

16
/304.8

14

/280.0
12

10

8 NPSH
[m]
6 6
/381.0
/356.0
/330.0
4 /304.8 4
/280.0
2 2

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]
P2 Eta
[kW] [%]
36 90

32 /381.0 80
/356.0
/280.0 /304.8 /330.0
28 70

24 60
/381.0
20 50
/356.0
16 40
/330.0
12 30
/304.8
8 /280.0 20
TM07 2640 4018

4 10

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]

94
 12

Performance curves and technical data

LS 250-200-305
H
[m]
15
/304.8 LS 250-200-305C
50 Hz, n = 980 min-1
14 ISO 9906 Grade 2B

13
/279.4
12

11

/254.0
10

/228.6
8

7
/203.2

3 NPSH
[m]
2 /203.2 8
/228.6
/254.0
/279.4
1 /304.8 4

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]
P2 Eta
[kW] [%]
36 90

32 /304.8 80
/279.4
28 /254.0 70
/228.6
24 /203.2 60

20 50

16 40
/304.8
12 30
/279.4
8 /254.0 20
TM07 2646 4018

/228.6
4 /203.2 10

0 0
0 50 100 150 200 250 300 350 400 450 500 Q [m³/h]

95
12
Performance curves and technical data

LS 200-150-483

H
[m]
40 LS 200-150-483D
38 /482.6
50 Hz, n = 980 min-1
ISO 9906 Grade 2B
36

34 /457.2

32

30 /432.0

28
/406.4
26

24
/381.0
22

20

18

16

14

12
NPSH
10
[m]
8 4

6 3

4 /381.0, /406.4, /432.0, /457.2, /482.6 2

2 1

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340Q [m³/h]
P2 Eta
[kW] [%]
45 90

40 80
/482.6
35 /457.2 70
/432.0 /482.6
/381.0 /406.4
30 60
/457.2
25 50
/432.0
20 40
/406.4
15 /381.0 30

10 20
TM07 2642 4018

5 10

0 0
0 20 40 60 80 100 120 140 160 180 200 220 240 260 280 300 320 340Q [m³/h]

96
 12

Performance curves and technical data

LS 200-150-483 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-483 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
15 180L Siemens 6 888 888 489 44.45 432 432 311 311 615 712 838 48 4
18.5 200L Siemens 6 888 888 489 44.45 432 432 311 311 615 769 947 55 4
22 200L Siemens 6 888 888 489 44.45 432 432 311 311 615 769 947 55 4
30 225M Siemens 6 888 888 489 44.45 432 432 311 311 615 849 910 60 4
37 250M Siemens 6 888 888 489 44.45 432 432 311 311 615 887 982 65 4
45 280S Siemens 6 888 888 489 44.45 432 432 311 311 615 960 1005 75 13
15 180L MMG-G 6 888 888 489 44.45 432 432 311 311 615 710 839 48 4
18.5 200LA MMG-G 6 888 888 489 44.45 432 432 311 311 615 770 904 55 4
22 200LB MMG-G 6 888 888 489 44.45 432 432 311 311 615 770 904 55 4
30 25MC MMG-G 6 888 888 489 44.45 432 432 311 311 615 841 930 60 4
37 250MC MMG-G 6 888 888 489 44.45 432 432 311 311 615 921 972 65 4
45 280SB MMG-G 6 888 888 489 44.45 432 432 311 311 615 1037.5 1005 75 13

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
15 180L Siemens 6 1450 200 85 525 390 346 8.5 6 18 114 114 26 534 144 777 1.70
18.5 200L Siemens 6 1500 200 78 550 440 378 11 6 23 121 121 - 534 186 826 1.85
22 200L Siemens 6 1500 200 78 550 440 378 11 6 23 121 121 - 534 217 857 1.85
30 225M Siemens 6 1513 200 82 557 495 452 9 6 23 117 117 110 534 325 973 1.92
37 250M Siemens 6 1580 200 80 590 545 502 9 6 23 119 119 80 534 405 1064 2.09
45 280S Siemens 6 1673 200 80 637 605 560 9 6 23 119 119 69 534 520 1194 2.22
15 180L MMG-G 6 1450 200 85 525 390 346 8.5 6 18 114 114 38 534 205 739 2.602
18.5 200LA MMG-G 6 1500 200 78 550 440 378 11 6 23 122 122 40 534 270 804 2.691
22 200LB MMG-G 6 1500 200 78 550 440 378 11 6 23 122 122 40 534 290 824 2.691
30 25MC MMG-G 6 1513 200 82 557 495 452 9 6 23 117 117 103 534 385 919 2.805
37 250MC MMG-G 6 1580 200 80 590 545 502 9 6 23 119 119 114 534 460 994 3.020
45 280SB MMG-G 6 1673 200 80 637 605 560 9 6 23 119 119 147 534 561 1095 3.294

97
12
Performance curves and technical data

LS 200-150-508

H
[m]
LS 200-150-508B
48
50 Hz, n = 980 min-1
ISO 9906 Grade 2B
/508.0
44

40
/470.0
36

32 /431.8

28
/393.7

24

/355.6
20

16
NPSH
[m]
/508.0
12 /470.0 6
/431.8
/393.7
8 4

/355.6
4 2

0 0
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]
P2 Eta
[kW] [%]
90 90

80 80
/393.7 /431.8 /470.0 /508.0
70 70
/355.6
60 60
/508.0
50 50
/470.0
40 40
/431.8
30 30
/393.7
20 20
/355.6
TM07 2644 4018

10 10

0 0
0 40 80 120 160 200 240 280 320 360 400 440 Q [m³/h]

98
 12

Performance curves and technical data

LS 200-150-508 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-508 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
18.5 200L Siemens 6 995 995 546 53.98 432 483 311 311 660 769 886 55 4
22 200L Siemens 6 995 995 546 53.98 432 483 311 311 660 769 886 55 4
30 225M Siemens 6 995 995 546 53.98 432 483 311 311 660 849 989 60 4
37 250M Siemens 6 995 995 546 53.98 432 483 311 311 660 887 981 65 4
45 280S Siemens 6 995 995 546 53.98 432 483 311 311 660 960 1024 75 5
55 280M Siemens 6 995 995 546 53.98 432 483 311 311 660 960 1024 75 5
75 315S Siemens 6 995 995 546 53.98 432 483 371 371 660 1102 1166 80 5
18.5 200LA MMG-G 6 995 995 546 53.98 432 483 311 311 660 770 923 55 4
22 200LB MMG-G 6 995 995 546 53.98 432 483 311 311 660 770 923 55 4
30 225MC MMG-G 6 995 995 546 53.98 432 483 311 311 660 841 949 60 4
37 250MC MMG-G 6 995 995 546 53.98 432 483 311 311 660 921 991 65 4
45 280SB MMG-G 6 995 995 546 53.98 432 483 311 311 660 1037.5 1024 75 5
55 280MB MMG-G 6 995 995 546 53.98 432 483 311 311 660 1087.5 1024 75 5
75 315SB MMG-G 6 995 995 546 53.98 432 483 371 371 660 1246 1179 80 5

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
18.5 200L Siemens 6 1520 200 78 560 425 381 8.5 6 18 171 171 29 545 186 835 2.25
22 200L Siemens 6 1520 200 78 560 425 381 8.5 6 18 171 171 29 545 217 866 2.25
30 225M Siemens 6 1570 200 80 585 465 403 11 6 23 169 169 108 545 325 983 2.58
37 250M Siemens 6 1640 200 80 620 555 511 8.5 6 18 169 169 77 545 405 1076 2.51
45 280S Siemens 6 1750 200 80 675 605 577 9 6 23 169 169 41 545 520 1204 2.71
55 280M Siemens 6 1750 200 80 675 605 577 9 6 23 169 169 151 545 570 1254 2.84
75 315S Siemens 6 1980 200 80 790 725 665 11 6 23 169 169 - 545 760 1514 3.32
18.5 200LA MMG-G 6 1520 200 78 560 425 381 8.5 6 18 171 171 77 545 270 815 3.080
22 200LB MMG-G 6 1520 200 78 560 425 381 8.5 6 18 171 171 77 545 290 835 3.080
30 25MC MMG-G 6 1570 200 80 585 465 403 11 6 23 169 169 101 545 385 930 3.193
37 250MC MMG-G 6 1640 200 80 620 555 511 8.5 6 18 169 169 111 545 460 1005 3.372
45 280SB MMG-G 6 1750 200 80 675 605 577 9 6 23 169 169 119 545 561 1106 4.051
55 280MB MMG-G 6 1750 200 80 675 605 577 9 6 23 169 169 169 545 635 1180 4.143
75 315SB MMG-G 6 1980 200 80 790 725 665 11 6 23 169 169 97 545 900 1445 4.886

99
12
Performance curves and technical data

LS 250-200-381

H
[m]
LS 250-200-381B
24 /381.0 50 Hz, n = 980 min-1
ISO 9906 Grade 2B
22

/355.6
20

18
/330.2

16
/304.8
14

/280.0
12

10

8
NPSH
[m]
6 6
/355.6 /381.0
/330.2
/280.0 /304.8
4 4

2 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 Q [m³/h]
P2 Eta
[kW] [%]
45 90

40 /381.0 80
/330.2 /355.6
35 /280.0 /304.8 70
/381.0
30 60

25 /355.6 50

20 /330.2 40

15 /304.8 30

10 /280.0 20
TM07 2648 4018

5 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 Q [m³/h]

100
 12

Performance curves and technical data

LS 250-200-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 250-200-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
11 160L Siemens 6 949 949 518 44.45 483 483 318 318 655 628 839 42 3
15 180L Siemens 6 949 949 518 44.45 483 483 318 318 655 712 969 48 4
18.5 200L Siemens 6 949 949 518 44.45 483 483 318 318 655 769 918 55 4
22 200L Siemens 6 949 949 518 44.45 483 483 318 318 655 769 918 55 4
30 225M Siemens 6 949 949 518 44.45 483 483 318 318 655 849 1021 60 7
37 250M Siemens 6 949 949 518 44.45 483 483 318 318 655 887 1013 65 7
45 280S Siemens 6 949 949 518 44.45 483 483 318 318 655 960 1056 75 17
11 160L MMG-G 6 949 949 518 44.45 483 483 318 318 655 652 864 42 3
15 180L MMG-G 6 949 949 518 44.45 483 483 318 318 655 710 890 48 4
18.5 200LA MMG-G 6 949 949 518 44.45 483 483 318 318 655 770 955 55 4
22 200LB MMG-G 6 949 949 518 44.45 483 483 318 318 655 770 955 55 4
30 25MC MMG-G 6 949 949 518 44.45 483 483 318 318 655 841 981 60 7
37 250MC MMG-G 6 949 949 518 44.45 483 483 318 318 655 921 1023 65 7
45 280SB MMG-G 6 949 949 518 44.45 483 483 318 318 655 1037.5 1056 75 17

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
11 160L Siemens 6 1480 200 150 540 400 356 8.5 6 18 81 81 19 568 105 782 2.19
15 180L Siemens 6 1520 200 150 560 430 368 11 6 23 81 81 50 568 144 828 2.44
18.5 200L Siemens 6 1560 200 150 580 425 381 8.5 6 18 81 81 33 568 186 868 2.30
22 200L Siemens 6 1560 200 150 580 425 381 8.5 6 18 81 81 33 568 217 899 2.30
30 225M Siemens 6 1620 200 150 610 465 403 11 6 23 81 81 102 568 325 1016 2.65
37 250M Siemens 6 1690 200 150 645 555 511 8.5 6 18 81 81 71 568 405 1109 2.65
45 280S Siemens 6 1780 200 150 690 605 577 9 6 23 81 81 64 568 520 1246 2.86
11 160L MMG-G 6 1480 200 150 540 400 356 8.5 6 18 81 81 43 568 150 718 2.939
15 180L MMG-G 6 1520 200 150 560 430 368 11 6 23 81 81 62 568 205 773 3.037
18.5 200LA MMG-G 6 1560 200 150 580 425 381 8.5 6 18 81 81 82 568 270 838 3.138
22 200LB MMG-G 6 1560 200 150 580 425 381 8.5 6 18 81 81 82 568 290 858 3.138
30 25MC MMG-G 6 1620 200 150 610 465 403 11 6 23 81 81 96 568 385 953 3.280
37 250MC MMG-G 6 1690 200 150 645 555 511 8.5 6 18 81 81 106 568 460 1028 3.523
45 280SB MMG-G 6 1780 200 150 690 605 577 9 6 23 81 81 142 568 561 1129 4.241

101
12
Performance curves and technical data

LS 300-200-489

H
[m]
42 LS 300-200-489C
40 50 Hz, n = 980 min-1
/489.0
ISO 9906 Grade 2B
38

36

34 /457.2

32

30

28
/406.4
26

24
/381.0
22

20 /355.6

18

16

14

12

10
NPSH
8 [m]
6 /457.2 /489.0 6
/355.6 /381.0 /406.4
4 4

2 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850Q [m³/h]
P2 Eta
[kW] [%]
180 90

160 80
/457.2 /489.0
/406.4
140 /355.6 /381.0 70

120 60

100 50

80 /489.0 40

60 /457.2 30

40 /406.4 20
/381.0
TM07 2650 4018

20 /355.6 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850Q [m³/h]

102
 12

Performance curves and technical data

LS 300-200-489 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-200-489 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
37 250M Siemens 6 1306 1306 723 63.5 414 559 338 338 745 887 1139 65 4
45 280S Siemens 6 1306 1306 723 63.5 414 559 338 338 745 960 1082 75 4
55 280M Siemens 6 1306 1306 723 63.5 414 559 338 338 745 960 1082 75 4
75 315S Siemens 6 1306 1306 723 63.5 414 559 398 398 745 1102 1244 80 4
90 315M Siemens 6 1306 1306 723 63.5 414 559 398 398 745 1262 1244 80 4
110 315L Siemens 6 1306 1306 723 63.5 414 559 398 398 745 1262 1244 80 4
37 250MC MMG-G 6 1306 1306 723 63.5 414 559 338 338 745 921 1069 65 4
45 280SB MMG-G 6 1306 1306 723 63.5 414 559 338 338 745 1037.5 1102 75 4
55 280MB MMG-G 6 1306 1306 723 63.5 414 559 338 338 745 1087.5 1102 75 4
75 315SB MMG-G 6 1306 1306 723 63.5 414 559 398 398 745 1246 1257 80 4
90 315MB MMG-G 6 1306 1306 723 63.5 414 559 398 398 745 1296 1257 80 4
110 315LB MMG-G 6 1306 1306 723 63.5 414 559 398 398 745 1396 1257 80 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
37 250M Siemens 6 1900 200 150 750 680 618 11 6 23 233 233 63 727 405 1354 3.49
45 280S Siemens 6 2000 200 150 800 680 636 8.5 6 18 233 233 36 727 520 1430 3.42
55 280M Siemens 6 2000 200 150 800 680 636 8.5 6 18 233 233 36 727 570 1480 3.42
75 315S Siemens 6 2150 200 150 875 700 638 11 6 18 233 233 28 727 760 1723 4.12
90 315M Siemens 6 2150 200 150 875 700 638 11 6 18 233 233 188 727 935 1898 4.37
110 315L Siemens 6 2150 200 150 875 700 638 11 6 18 233 233 188 727 1010 1973 4.37
37 250MC MMG-G 6 1900 200 150 750 680 618 11 6 23 233 233 98 727 460 1187 4.798
45 280SB MMG-G 6 2000 200 150 800 680 632 8.5 6 18 233 233 115 727 561 1288 5.094
55 280MB MMG-G 6 2000 200 150 800 680 632 8.5 6 18 233 233 165 727 635 1362 5.196
75 315SB MMG-G 6 2150 200 150 875 700 638 11 6 18 233 233 173 727 900 1627 6.051
90 315MB MMG-G 6 2150 200 150 875 700 638 11 6 18 233 233 223 727 960 1687 6.163
110 315LB MMG-G 6 2150 200 150 875 700 638 11 6 18 233 233 323 727 1090 1817 6.386

103
12
Performance curves and technical data

LS 300-250-305

H
[m]
15
LS 300-250-305E
/304.8 50 Hz, n = 980 min-1
14 ISO 9906 Grade 2B

13
/279.4
12

11

/254.0
10

9 /236.2

7
/211.0

4 NPSH
[m]
3 6
/211.0 /236.2 /254.0 /279.4 /304.8
2 4

1 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 Q [m³/h]
P2 Eta
[kW] [%]
36 90

32 80
/236.2 /279.4 /304.8
28 /254.0 70

24 /211.0 60

20 50
/304.8
16 40
/279.4
12 30
/254.0
8 /236.2 20
/211.0
TM07 2651 4018

4 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 Q [m³/h]

104
 12

Performance curves and technical data

LS 300-250-305 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-250-305 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
11 160L Siemens 6 974 974 530 44.45 495 495 343 343 645 628 880 42 3
15 180L Siemens 6 974 974 530 44.45 495 495 343 343 645 712 929 48 4
18.5 200L Siemens 6 974 974 530 44.45 495 495 343 343 645 769 958 55 4
22 200L Siemens 6 974 974 530 44.45 495 495 343 343 645 769 958 55 4
30 225M Siemens 6 974 974 530 44.45 495 495 343 343 645 849 981 60 6
11 160L MMG-G 6 974 974 530 44.45 495 495 343 343 645 652 884 42 3
15 180L MMG-G 6 974 974 530 44.45 495 495 343 343 645 710 910 48 4
18.5 200LA MMG-G 6 974 974 530 44.45 495 495 343 343 645 770 975 55 4
22 200LB MMG-G 6 974 974 530 44.45 495 495 343 343 645 770 975 55 4
30 25MC MMG-G 6 974 974 530 44.45 495 495 343 343 645 841 1001 60 6

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
11 160L Siemens 6 1500 200 150 550 420 372 9 6 18 94 94 11 636 105 855 2.34
15 180L Siemens 6 1530 200 150 565 400 352 9 6 18 94 94 52 636 144 895 2.43
18.5 200L Siemens 6 1570 200 150 585 420 372 9 6 18 94 94 35 636 186 939 2.46
22 200L Siemens 6 1570 200 150 585 420 372 9 6 18 94 94 35 636 217 970 2.46
30 225M Siemens 6 1650 200 150 625 465 417 9 6 18 94 94 85 636 325 1089 2.59
11 160L MMG-G 6 1500 200 150 550 420 372 9 6 18 94 94 35 636 150 786 3.071
15 180L MMG-G 6 1530 200 150 565 400 352 9 6 18 94 94 64 636 205 841 3.172
18.5 200LA MMG-G 6 1570 200 150 585 420 372 9 6 18 94 94 84 636 270 906 3.276
22 200LB MMG-G 6 1570 200 150 585 420 372 9 6 18 94 94 84 636 290 926 3.276
30 25MC MMG-G 6 1650 200 150 625 465 417 9 6 18 94 94 77 636 385 1021 3.436

105
12
Performance curves and technical data

LS 300-250-381

H
[m]
/390.0
LS 300-250-381B
24
50 Hz, n = 980 min-1
ISO 9906 Grade 2B
22

20 /355.6

18
/330.2
16

/304.8
14

12 /279.4

10

8
NPSH
[m]
6 6
/279.4 /304.8 /330.2
/355.6
/390.0
4 4

2 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850Q [m³/h]
P2 Eta
[kW] [%]
90 90

80 /330.2 /355.6 /390.0 80

/304.8
70 70
/279.4
60 60

50 /390.0 50

40 40
/355.6
30 30
/330.2
20 /304.8 20
TM07 2653 4018

/279.4
10 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 850Q [m³/h]

106
 12

Performance curves and technical data

LS 300-250-381 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 300-250-381 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
18.5 200L Siemens 6 1051 1051 600 57.15 432 584 394 394 630 769 963 55 4
22 200L Siemens 6 1051 1051 600 57.15 432 584 394 394 630 769 963 55 4
30 225M Siemens 6 1051 1051 600 57.15 432 584 394 394 630 849 986 60 4
37 250M Siemens 6 1051 1051 600 57.15 432 584 394 394 630 887 1058 65 4
45 280S Siemens 6 1051 1051 600 57.15 432 584 454 454 630 960 1141 75 4
55 280M Siemens 6 1051 1051 600 57.15 432 584 454 454 630 960 1141 75 4
18.5 200LA MMG-G 6 1051 1051 600 57.15 432 584 394 394 630 770 980 55 4
22 200LB MMG-G 6 1051 1051 600 57.15 432 584 394 394 630 770 980 55 4
30 25MC MMG-G 6 1051 1051 600 57.15 432 584 394 394 630 841 1006 60 4
37 250MC MMG-G 6 1051 1051 600 57.15 432 584 394 394 630 921 1048 65 4
45 280SB MMG-G 6 1051 1051 600 57.15 432 584 454 454 630 1037.5 1141 75 4
55 280MB MMG-G 6 1051 1051 600 57.15 432 584 454 454 630 1087.5 1141 75 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
18.5 200L Siemens 6 1570 200 80 585 520 472 9 6 18 171 171 35 991 186 1301 2.70
22 200L Siemens 6 1570 200 80 585 520 472 9 6 18 171 171 35 991 217 1332 2.70
30 225M Siemens 6 1640 200 80 620 540 492 9 6 18 171 171 92 991 325 1447 2.87
37 250M Siemens 6 1700 200 80 650 560 512 9 6 18 171 171 71 991 405 1536 3.02
45 280S Siemens 6 1800 200 80 700 600 538 11 6 23 171 171 44 991 520 1709 3.34
55 280M Siemens 6 1800 200 80 700 600 538 11 6 23 171 171 154 991 570 1759 3.51
18.5 200LA MMG-G 6 1570 200 80 585 520 472 9 6 18 171 171 84 991 270 1261 3.571
22 200LB MMG-G 6 1570 200 80 585 520 472 9 6 18 171 171 84 991 290 1281 3.571
30 25MC MMG-G 6 1640 200 80 620 540 492 9 6 23 171 171 85 991 385 1376 3.699
37 250MC MMG-G 6 1700 200 80 650 560 512 9 6 18 171 171 105 991 460 1451 3.911
45 280SB MMG-G 6 1800 200 80 700 600 538 11 6 23 171 171 121 991 561 1552 4.842
55 280MB MMG-G 6 1800 200 80 700 600 538 11 6 23 171 171 171 991 635 1626 4.950

107
12
Performance curves and technical data

LS 350-250-498

H
[m]
40 /498.0 LS 350-250-498C
38 50 Hz, n = 980 min-1
ISO 9906 Grade 2B
36

34
/457.0
32

30

28

26 /406.4
24

22

20 /355.6
18

16

14

12

10
NPSH
8
[m]
6 /355.6 /406.4 /457.0 /498.0 6

4 4

2 2

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]
P2 Eta
[kW] [%]
180 90
/457.0
160 80
/406.4
/355.6 /498.0
140 70

120 60
/498.0
100 50

80 /457.0 40

60 30
/406.4
40 20
TM07 2683 4018

/355.6
20 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 Q [m³/h]

108
 12

Performance curves and technical data

LS 350-250-498 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 350-250-498 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
45 280S Siemens 6 1403 1403 797 79.38 508 660 446 446 785 960 1219 75 4
55 280M Siemens 6 1403 1403 797 79.38 508 660 446 446 785 960 1219 75 4
75 315S Siemens 6 1403 1403 797 79.38 508 660 446 446 785 1102 1301 80 4
90 315M Siemens 6 1403 1403 797 79.38 508 660 446 446 785 1262 1301 80 4
110 315L Siemens 6 1403 1403 797 79.38 508 660 446 446 785 1262 1301 80 4
132 315L Siemens 6 1403 1403 797 79.38 508 660 446 446 785 1402 1301 80 4
200 315L Siemens 6 1403 1403 797 79.38 508 660 426 426 785 1410 1266 85 4
45 280SB MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1037.5 1219 75 4
55 280MB MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1087.5 1219 75 4
75 315SB MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1246 1314 80 4
90 315MB MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1296 1314 80 4
110 315LB MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1396 1314 80 4
132 315LC MMG-G 6 1403 1403 797 79.38 508 660 446 446 785 1396 1314 80 4
160 355MB MMG-G 6 1403 1403 797 79.38 508 660 426 426 785 1605 1411 100 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
45 280S Siemens 6 2060 200 150 830 700 638 11 6 23 256 256 51 1436 520 2213 4.67
55 280M Siemens 6 2060 200 150 830 700 638 11 6 23 256 256 161 1436 570 2263 4.87
75 315S Siemens 6 2200 200 150 900 680 620 11 6 23 256 256 33 1436 760 2483 5.15
90 315M Siemens 6 2200 200 150 900 680 620 11 6 23 256 256 198 1436 935 2658 5.47
110 315L Siemens 6 2200 200 150 900 680 620 11 6 23 256 256 198 1436 1010 2733 5.47
132 315L Siemens 6 2200 200 150 900 680 620 11 6 23 256 256 198 1436 1180 2903 5.47
200 315L Siemens 6 2310 200 150 955 720 663 10.5 6 23 256 256 360 1436 1300 3048 5.64
45 280SB MMG-G 6 2060 200 150 830 700 638 11 6 23 256 256 128 1436 561 1997 6.592
55 280MB MMG-G 6 2060 200 150 830 700 638 11 6 23 256 256 178 1436 635 2071 6.719
75 315SB MMG-G 6 2300 250 100 900 680 620 11 6 23 256 256 97 1436 900 2336 7.461
90 315MB MMG-G 6 2300 250 100 900 680 620 11 6 23 256 256 147 1436 960 2396 7.595
110 315LB MMG-G 6 2300 250 100 900 680 620 11 6 23 256 256 247 1436 1090 2526 7.861
132 315LC MMG-G 6 2300 250 100 900 680 620 11 6 23 256 256 247 1436 1250 2686 7.861
160 355MB MMG-G 6 2410 200 150 1005 820 762.5 10.5 6 23 256 256 346 1436 1750 3186 8.871

109
12
Performance curves and technical data

LS 350-250-630

H
[m]
75
LS 350-250-630B
50 Hz, n = 990 min-1
70 /630.0 ISO 9906 Grade 2B

65

60
/580.0
55

50
/532.0

45

40 /483.0

35
/432.0
30

25

20 NPSH
[m]
/630.0
15 /580.0 6
/532.0
/432.0 /483.0
10 4

5 2

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600Q [m³/h]
P2 Eta
[kW] [%]
360 90

320 80
/630.0
280 /483.0 /532.0 /580.0 70
/432.0
240 /630.0 60

200 50
/580.0
160 40
/532.0
120 30
/483.0
80 20
/432.0
TM07 2685 4018

40 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 1600Q [m³/h]

110
 12

Performance curves and technical data

LS 350-250-630 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 350-250-630 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
75 315S Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1102 1350 80 4
90 315M Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1262 1350 80 4
110 315L Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1262 1350 80 4
132 315L Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1402 1350 80 4
160 315L Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1402 1350 80 4
200 315L Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1410 1335 85 4
250 315L Siemens 6 1377 1377 799 79.38 610 711 505 505 820 1400 1405 85 40
315 315L Siemens 6 1377 1377 799 79.38 610 711 485 485 820 1635 1505 95 4
75 315SB MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1246 1363 80 4
90 315MB MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1296 1363 80 4
110 315LB MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1396 1363 80 4
132 315LC MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1396 1363 80 4
160 355MB MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
185 355MC MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
200 355MD MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
220 355ME MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 5
250 355L MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1605 1480 100 4
300 355C MMG-G 6 1377 1377 799 79.38 610 711 505 505 820 1795 1480 100 5

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
75 315S Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 - 1905 760 2982 6.04
90 315M Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 104 1905 935 3157 6.27
110 315L Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 104 1905 1010 3232 6.27
132 315L Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 244 1905 1180 3402 6.58
160 315L Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 244 1905 1180 3402 6.58
200 315L Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 252 1905 1300 3522 6.53
250 315L Siemens 6 2310 200 150 955 724 656 11 6 23 228 228 242 1905 1500 3722 6.82
315 315L Siemens 6 2570 200 150 1085 835 778 10.5 6 23 228 228 217 1905 2000 4249 7.85
75 315SB MMG-G 6 2310 200 150 955 724 656 11 6 23 228 228 89 1905 900 2805 8.383
90 315MB MMG-G 6 2310 200 150 955 724 656 11 6 23 228 228 139 1905 960 2865 8.534
110 315LB MMG-G 6 2310 200 150 955 724 656 11 6 23 228 228 239 1905 1090 2995 8.836
132 315LC MMG-G 6 2310 200 150 955 724 656 11 6 23 228 228 239 1905 1250 3155 8.836
160 355MB MMG-G 6 2550 320 30 955 790 740 11 6 23 228 228 208 1905 1750 3655 10.065
185 355MC MMG-G 6 2550 320 30 955 790 740 11 6 23 228 228 208 1905 1900 3805 10.065
200 355MD MMG-G 6 2550 320 30 955 790 740 11 6 23 228 228 208 1905 1950 3855 10.065
220 355ME MMG-G 6 2550 320 30 955 790 740 11 6 23 228 228 209 1905 2020 3925 10.067
250 355L MMG-G 6 2550 320 30 955 790 740 11 6 23 228 228 208 1905 2200 4105 10.065
300 355C MMG-G 6 2710 200 148 1155 805 737 11 6 18 230 230 237 1905 2400 4305 10.677

111
12
Performance curves and technical data

LS 350-300-508

H
[m]
46 LS 350-300-508C
/508.0
44 50 Hz, n = 990 min-1
42 ISO 9906 Grade 2B

40
38
36
34 /457.2

32
30
28
/406.4
26
24
22
/355.6
20
18 /330.2

16
14
12
NPSH
10 [m]
8 /330.2 /355.6 8
/406.4
/457.2
6 /508.0 6
4 4
2 2
0 0
0 100 200 300 400 500 600 700 800 900 1000110012001300140015001600170018001900 Q [m³/h]
P2 Eta
[kW] [%]
360 90

320 /508.0 80
/406.4 /457.2
280 /355.6 70
/330.2
240 60

200 50
/508.0
160 40

120 /457.2 30

80 /406.4 20
TM07 2686 4018

/355.6
40 /330.2 10

0 0
0 100 200 300 400 500 600 700 800 900 1000110012001300140015001600170018001900 Q [m³/h]

112
 12

Performance curves and technical data

LS 350-300-508 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 350-300-508 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
55 280M Siemens 6 1377 1377 749 63.5 584 711 513 513 790 960 1276 75 4
75 315S Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1102 1358 80 4
90 315M Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1262 1358 80 4
110 315L Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1262 1358 80 4
132 315L Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1402 1358 80 4
160 315L Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1402 1358 80 4
200 315L Siemens 6 1377 1377 749 63.5 584 711 513 513 790 1410 1343 85 4
55 280MB MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1087.5 1276 75 4
75 315SB MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1246 1371 80 4
90 315MB MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1296 1371 80 4
110 315LB MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1396 1371 80 4
132 315LC MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1396 1371 80 4
160 355MB MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1605 1488 100 4
185 355MC MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1605 1488 100 27
200 355MD MMG-G 6 1377 1377 749 63.5 584 711 513 513 790 1605 1488 100 27

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
55 280M Siemens 6 2020 200 150 810 700 638 11 6 23 278 278 153 1318 570 2148 5.56
75 315S Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 - 1318 760 2356 5.97
90 315M Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 60 1318 935 2531 6.10
110 315L Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 60 1318 1010 2606 6.10
132 315L Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 60 1318 1180 2776 6.10
160 315L Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 60 1318 1180 2776 6.10
200 315L Siemens 6 2290 200 150 945 710 656 11 6 23 278 278 60 1318 1300 2896 6.04
55 280MB MMG-G 6 2020 200 150 810 700 638 11 6 23 278 278 171 1318 635 1953 7.531
75 315SB MMG-G 6 2290 215 135 930 710 656 11 6 23 278 278 59 1318 900 2218 8.285
90 315MB MMG-G 6 2290 215 135 930 710 656 11 6 23 278 278 109 1318 960 2278 8.435
110 315LB MMG-G 6 2290 215 135 930 710 656 11 6 23 278 278 209 1318 1090 2408 8.733
132 315LC MMG-G 6 2290 215 135 930 710 656 11 6 23 278 278 209 1318 1250 2568 8.733
160 355MB MMG-G 6 2500 320 30 930 810 756 11 6 23 278 278 208 1318 1750 3068 9.944
185 355MC MMG-G 6 2500 320 30 930 810 756 11 6 23 278 278 231 1318 1900 3218 10.017
200 355MD MMG-G 6 2500 320 30 930 810 756 11 6 23 278 278 231 1318 1950 3268 10.017

113
12
Performance curves and technical data

LS 450-350-397

H
[m]
LS 450-350-397B
26 /397.0
50 Hz, n = 990 min-1
ISO 9906 Grade 2B
24
/377.0
22
/357.0
20

/337.0
18
/322.4

16

14

12

10

6 NPSH
[m]
/337.0
4 /322.4 /357.0 6
/377.0
/397.0
2 4

0 2
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 Q [m³/h]
P2 Eta
[kW] [%]
90 90

80 /397.0 80
/377.0
/322.4
70 /337.0 /357.0 70

60 60
/397.0
50 50

40 /377.0 40
/357.0
30 /337.0 30
/322.4
20 20
TM07 2688 4018

10 10

0 0
0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 Q [m³/h]

114
 12

Performance curves and technical data

LS 450-350-397 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HD
HS

TM07 2172 3118

HR

HG
n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 450-350-397 dimensions

Pump dimensions Motor dimensions Distance between

Motor
[mm] [mm] shaft ends [mm]

CP
P2 Frame
Brand Pole Mechanical Stuffing W ∅U X YY HD HS HZ LM HM ∅MU HT
[kW] size
seal box
37 250M Siemens 6 1400 1400 773.5 63.5 545 625 485 485 730 887 1280 65 4
45 280S Siemens 6 1400 1400 773.5 63.5 545 625 485 485 730 960 1303 75 4
55 280M Siemens 6 1400 1400 773.5 63.5 545 625 485 485 730 960 1303 75 4
75 315S Siemens 6 1400 1400 773.5 63.5 545 625 485 485 730 1102 1385 80 4
37 250MC MMG-G 6 1400 1400 773.5 63.5 545 625 485 485 730 921 1250 65 4
45 280SB MMG-G 6 1400 1400 773.5 63.5 545 625 485 485 730 1037.5 1283 75 4
55 280MB MMG-G 6 1400 1400 773.5 63.5 545 625 485 485 730 1087.5 1283 75 4
75 315SB MMG-G 6 1400 1400 773.5 63.5 545 625 485 485 730 1246 1378 80 4

Base frame dimensions Overhang Net weights

Motor Shipping
[mm] [mm] [kg]
volume
P2 Frame
Brand Pole LB LF2 HR LF1 HA HE HG n ∅HH
Mechanical Stuffing Motor
Pump Motor Total [m3]
[kW] size seal box end
37 250M Siemens 6 2008 200 230 831 805 750 11 6 23 146 146 84 1460 405 2145 4.75
45 280S Siemens 6 2040 200 230 871 820 758 11 6 23 288 288 - 1460 520 2278 5.04
55 280M Siemens 6 2040 200 230 871 820 758 11 6 23 288 288 - 1460 570 2328 5.04
75 315S Siemens 6 2330 200 230 1016 805 755 11 6 23 146 146 - 1460 760 2561 5.50
37 250MC MMG-G 6 2008 200 228 780 805 750 11 6 23 199 199 118 1460 460 1920 6.366
45 280SB MMG-G 6 2040 200 228 820 820 758 11 6 23 199 199 203 1460 561 2021 6.791
55 280MB MMG-G 6 2040 200 228 820 820 758 11 6 23 199 199 253 1460 635 2095 6.922
75 315SB MMG-G 6 2330 200 228 965 805 754.5 11 6 23 199 199 121 1460 900 2360 7.727

115
12
Performance curves and technical data

LS 200-150-475x2

H
[m]
75
LS 200-150-475Ax2
50 Hz, n = 980 min-1
/475.0
70 ISO 9906 Grade 2B

65
/445.0
60

55
/415.0
50

45 /385.0

40 /355.0

35

30

25 NPSH
[m]
20 8

15 /445.0 /475.0 6
/415.0
/385.0
10 /355.0 4

5 2

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]
P2 Eta
[kW] [%]
160 80
/475.0
/415.0 /445.0
140 /385.0 70
/355.0
120 60

100 50

80 /475.0 40

60 /445.0 30
/415.0
40 /385.0 20
/355.0
TM07 2760 4118

20 10

0 0
0 40 80 120 160 200 240 280 320 360 400 Q [m³/h]

116
 12

Performance curves and technical data

LS 200-150-475x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 200-150-475x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
37 250MC MMG-G 6 1142 615 57.15 550 575 400 685 921 1060 65 4 5.007
45 280SB MMG-G 6 1142 615 57.15 550 575 400 685 1037.5 1093 75 9 5.308
55 280MB MMG-G 6 1142 615 57.15 550 575 400 685 1087.5 1093 75 9 5.422
75 315SB MMG-G 6 1142 615 57.15 550 575 400 685 1246 1188 80 14 6.137
90 315MB MMG-G 6 1142 615 57.15 550 575 400 685 1296 1188 80 14 6.257

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
37 250MC MMG-G 6 1824 200 130 130 712 830 786 9.5 6 23 197 46 960 460 1420
45 280SB MMG-G 6 1952 200 130 130 776 830 786 9.5 6 23 197 40 960 561 1521
55 280MB MMG-G 6 1952 200 130 130 776 830 786 9.5 6 23 197 90 960 635 1595
75 315SB MMG-G 6 2178 200 130 130 889 830 786 9.5 6 23 197 27 960 900 1860
90 315MB MMG-G 6 2178 200 130 130 889 830 786 9.5 6 23 197 77 960 960 1920

117
12
Performance curves and technical data

LS 250-200-575x2

H
[m]
LS 250-200-575Ax2
110 50 Hz, n = 990 min-1
/575.0
ISO 9906 Grade 2B

100

/535.0
90

80
/495.0

70
/455.0

60
/415.0

50
NPSH
[m]
40 8

/535.0 /575.0
30 6
/495.0
/455.0
/415.0
20 4

10 2

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]
P2 Eta
[kW] [%]
400 80
/575.0
350 /535.0 70
/495.0
/455.0
300 /415.0 60

250 50
/575.0
200 40
/535.0
150 30
/495.0
100 /455.0 20
/415.0
TM07 2764 4118

50 10

0 0
0 50 100 150 200 250 300 350 400 450 500 550 600 650 700 750 800 Q [m³/h]

118
 12

Performance curves and technical data

LS 250-200-575x2 dimensional sketches

CP LM
W HT YY X
ØU Ø MU

HZ
HM

HS

HD

TM07 2170 3118

HL

HG
HR n x Ø HH HE
LF2 LF1 LF2 HA
LB

LS 250-200-575x2 dimensions

Pump dimensions Motor dimensions Distance between

Motor Shipping
[mm] [mm] shaft ends [mm]
volume
P2 Frame
Brand Pole CP W ∅U X YY HD/HS HZ LM HM ∅MU HT [m3]
[kW] size
90 315MB MMG-G 6 1496 800 79.38 600 750 450 850 1296 1288 80 9 8.791
110 315LB MMG-G 6 1496 800 79.38 600 750 450 850 1396 1288 80 9 9.089
132 315LC MMG-G 6 1496 800 79.38 600 750 450 850 1396 1288 80 9 9.089
160 355MB MMG-G 6 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
185 355MC MMG-G 6 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
200 355MD MMG-G 6 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
220 355ME MMG-G 6 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732
250 355L MMG-G 6 1496 800 79.38 600 750 490 850 1605 1445 100 19 10.732

Base frame dimensions Overhang Net weights

Motor
[mm] [mm] [kg]

P2 Frame
Brand Pole LB LF2 HR HL LF1 HA HE HG n ∅HH Pump Motor Pump Motor Total
[kW] size
90 315MB MMG-G 6 2276 200 190 150 938 1210 1166 9.5 6 23 306 219 1452 960 2412
110 315LB MMG-G 6 2276 200 190 150 938 1210 1166 9.5 6 23 306 319 1452 1090 2542
132 315LC MMG-G 6 2276 200 190 150 938 1210 1166 9.5 6 23 306 319 1452 1250 2702
160 355MB MMG-G 6 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 1750 3202
185 355MC MMG-G 6 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 1900 3352
200 355MD MMG-G 6 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 1950 3402
220 355ME MMG-G 6 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 2020 3472
250 355L MMG-G 6 2878 200 190 150 1239 1210 1158 10.5 6 23 306 - 1452 2200 3652

119
13
Electrical data

13. Electrical data

The standard motor brands used for the LS pump
range are MMG-G (IE3), MG (IE3) and Siemens (IE3
up to 630 kW) motors. Other motor makes are
available on request.
For special voltage variants, please contact Grundfos.

Standard motor brands

MMG-G, 2-pole, IE3
Motor P2 Standard voltage I1/1 η Istart/I1/1
Frame size Cos φ1/1
[kW] [V] [A] [%] [%]
11 160M 3 x 380-420 D/660 Y 20.4 - 18.4 / 11.7 0.90 91.2 775
15 160M 3 x 380-420 D/660 Y 27.9 - 25.2 / 16 0.89 91.9 869
18.5 160L 3 x 380-420 D/660 Y 33.8 - 30.6 / 19.5 0.90 92.4 810
22 180M 3 x 380-420 D/660 Y 41.4 - 37.5 / 23.9 0.87 92.7 762
30 200L 3 x 380-420 D/660 Y 54.3 - 49.1 / 31.3 0.90 93.3 776
37 200L 3 x 380-420 D/660 Y 65.9 - 59.7 / 38 0.91 93.7 814
45 225MA 3 x 380-420 D/660 Y 79.9 - 72.3 / 46 0.91 94 810
55 250MA 3 x 380-420 D/660 Y 96.8 - 87.6 / 55.8 0.92 94.3 799
75 280SA 3 x 380-420 D/660 Y 148-134 / 85 0.82 94.7 777
90 280MA 3 x 380-420 D/660 Y 159-144 / 91.6 0.91 95 831
110 315SA 3 x 380-420 D/660 Y 195-176 / 112 0.90 95.2 760
132 315MA 3 x 380-420 D/660 Y 232-210 / 134 0.91 95.4 750
160 315L 3 x 380-420 D/660 Y 279-253 / 161 0.91 95.6 808

MMG-G, 4-pole, IE3

Motor P2 Standard voltage I1/1 η Istart/I 1/1
Frame size Cos φ1/1
[kW] [V] [A] [%] [%]
1.5 90L 3 x 380-420 D/660 Y 3.6 - 3.2 / 2.1 0.75 85.3 768
2.2 100L 3 x 380-420 D/660 Y 4.8 - 4.3 / 2.7 0.81 86.7 730
3 100L 3 x 380-420 D/660 Y 6.7 - 6 / 3.8 0.78 87.7 774
4 112M 3 x 380-420 D/660 Y 8.4 - 7.6 / 4.8 0.82 88.6 717
5.5 132S 3 x 380-420 D/660 Y 11 - 9.9 / 6.3 0.85 89.6 739
7.5 132M 3 x 380-420 D/660 Y 14.9 - 13.5 / 8.6 0.85 90.4 776
11 160M 3 x 380-420 D/660 Y 21.8 - 19.7 / 12.5 0.84 91.4 774
15 160L 3 x 380-420 D/660 Y 29.3 - 26.5 / 16.9 0.85 92.1 809
18.5 180M 3 x 380-420 D/660 Y 37.2 - 33.7 / 21.4 0.82 92.6 763
22 180L 3 x 380-420 D/660 Y 44.4 - 40.1 / 25.5 0.81 93 747
30 200L 3 x 380-420 D/660 Y 56.6 - 51.2 / 32.6 0.86 93.6 827
37 225S 3 x 380-420 D/660 Y 70 - 63.4 / 40.3 0.86 93.9 759
45 225M 3 x 380-420 D/660 Y 85.9 - 77.7 / 49.5 0.85 94.2 735
55 250M 3 x 380-420 D/660 Y 101 - 91.3 / 58.1 0.88 94.6 782
75 280S 3 x 380-420 D/660 Y 141.1 - 128 / 81.2 0.85 95 768
90 280M 3 x 380-420 D/660 Y 171-155 / 98.5 0.84 95.2 778
110 315S 3 x 380-420 D/660 Y 196.8 - 178 / 113 0.89 95.4 750
132 315M 3 x 380-420 D/660 Y 235.7 - 213 / 136 0.89 95.6 740
160 315L 3 x 380-420 D/660 Y 283.5 - 257 / 163 0.90 95.8 743
200 315L 3 x 380-420 D/660 Y 351.7 - 318 / 202 0.90 96 748
250 315M 3 x 380-420 D/660 Y 445.6 - 403 / 257 0.89 96 775
315 355L 3 x 380-420 D/660 Y 557-504/321 0.90 96 737
355 355C 3 x 380-420 D/660 Y 624.3 - 565 / 359 0.90 96 730
400 315DB 3 x 380-420 D 739-669 0.86 96.2 724
425 355CB 3 x 380-420 D 789-714 0.85 96.2 715
450 355CB 3 x 380-420 D 836-756 0.85 96.2 757
475 355CB 3 x 380-420 D 873-790 0.86 96.2 726
500 355CB 3 x 380-420 D 917-830 0.86 96.3 767
530 355CB 3 x 380-420 D 973-880 0.86 96.3 744
560 400CB 3 x 380-420 D 1034-935 0.86 96.3 715
600 400CB 3 x 380-420 D 1101-996 0.86 96.3 696

120
 13

Electrical data
MMG-G, 6-pole, IE3
Motor P2 [kW] Frame size Standard voltage [V] I1/1 [A] Cos φ1/1 η [%] Istart/I1/1 [%]
11 160L 3 x 380-420 D/660 Y 23.7 - 21.5 / 13.7 0.78 90.3 754
15 180L 3 x 380-420 D/660 Y 30.5 - 27.6 / 17.5 0.82 91.2 691
18.5 200L 3 x 380-420 D/660 Y 38.1 - 34.5 / 21.9 0.81 91.7 719
22 200L 3 x 380-420 D/660 Y 44.5 - 40.2 / 25.6 0.82 92.2 722
30 225M 3 x 380-420 D/660 Y 58.8 - 53.2 / 33.8 0.84 92.9 600
37 250M 3 x 380-420 D/660 Y 70.9 - 64.1 / 40.8 0.85 93.3 728
45 280S 3 x 380-420 D/660 Y 89.5 - 81 / 51.5 0.82 93.7 690
55 280M 3 x 380-420 D/660 Y 107 - 96.8 / 61.6 0.83 94.1 689
75 315S 3 x 380-420 D/660 Y 141-127 / 81.1 0.86 94.6 695
90 315M 3 x 380-420 D/660 Y 169-152 / 97 0.86 94.9 750
110 315L 3 x 380-420 D/660 Y 206-186 / 118 0.86 95.1 718
132 315L 3 x 380-420 D/660 Y 246-222 / 142 0.86 95.4 705
160 355M 3 x 380-420 D/660 Y 297-269 / 171 0.86 95.6 707
185 355M 3 x 380-420 D/660 Y 341-309 / 196 0.86 95.8 730
200 355M 3 x 380-420 D/660 Y 369-334 / 212 0.86 95.8 686
220 355M 3 x 380-420 D/660 Y 403-365 / 232 0.87 95.8 705
250 355L 3 x 380-420 D/660 Y 457-413 / 263 0.87 95.8 705
300 355C 3 x 380-420 D/660 Y 550-498 / 317 0.87 95.8 720

MG or Siemens, 2-pole, IE3

Motor P2 Motor Frame Standard voltage I 1/1 η Istart/I1/1
Cos φ 1/1
[kW] type size [V] [A] [%] [%]
11 MG 160MB 3 x 380-415 D/660-690 Y 20.8 - 19.8 / 12.0 - 11.8 0.88 - 0.84 91.2 660-780
15 MG 160MD 3 x 380-415 D/660-690 Y 28.0 - 26.0 / 16.2 - 15.6 0.89 - 0.87 91.9 660-780
18.5 MG 160LB 3 x 380-415 D/660-690 Y 34.0 - 31.0 / 19.6 - 18.8 0.90 - 0.89 92.4 710-850
22 MG 180MB 3 x 380-415 D/660-690 Y 39.5 / 22.8 0.90 92.7 830-830
30 Siemens 200L 3 x 380-420 D/660-725 Y 56.0 - 51.0 / 32.0 - 29.5 0.86 93.3 660
37 Siemens 200L 3 x 380-420 D/660-725 Y 68.0 - 63.0 / 39.0 - 36.0 0.87 93.7 670
45 Siemens 225M 3 x 380-420 D/660-725 Y 82.0 - 75.0 / 47.5 - 43.5 0.89 94.0 690
55 Siemens 250M 3 x 380-420 D/660-725 Y 99.0 - 92.0 / 57.0 - 53.0 0.89 94.3 670
75 Siemens 280S 3 x 380-420 D/660-725 Y 134-126 / 77.0 - 72.0 0.89 94.7 680
90 Siemens 280M 3 x 380-420 D/660-725 Y 160-148 / 92.0 - 85.0 0.90 95.0 720

MG or Siemens, 4-pole, IE3

Motor P2 Motor Frame Standard voltage I 1/1 η Istart/I1/1
Cos φ 1/1
[kW] type size [V] [A] [%] [%]
1.5 MG 90LC 380-415 D 3.55 - 3.65 0.75 - 0.68 85.3 730-790
2.2 MG 100LB 380-415 D 4.90 0.79 - 0.73 86.7 600-660
3 MG 100LC 380-415 D 6.30 0.82 - 0.76 87.7 700-770
4 MG 112MC 380-415 D 9.30 0.75 - 0.68 88.6 790-870
5.5 MG 132SB 3 x 380-415 D/660-690 Y 11.0 - 11.0 / 6.35 - 6.35 0.86 - 0.80 89.6 700-760
7.5 MG 132MB 3 x 380-415 D/660-690 Y 14.9 - 14.2 / 8.60 - 8.40 0.86 - 0.82 90.4 680-780
11 MG 160MB 3 x 380-415 D/660-690 Y 21.2 - 20.4 / 12.2 - 12.0 0.86 - 0.81 91.4 710-810
15 MG 160LC 3 x 380-415 D/660-690 Y 29.0 - 28.0 / 16.8 - 16.4 0.86 - 0.82 92.1 760-870
18.5 Siemens 180M 3 x 380-420 D/660-725 Y 37.0 - 33.5 / 21.6 - 19.6 0.82 92.6 690
22 Siemens 180L 3 x 380-420 D/660-725 Y 42.5 - 40.5 / 24.6 - 23.6 0.83 93.0 680
30 Siemens 200L 3 x 380-420 D/660-725 Y 57.5 - 54.0 / 33.5 - 31.5 0.84 93.6 690
37 Siemens 225S 3 x 380-420 D/660-725 Y 69.0 - 64.0 / 39.5 - 37.0 0.86 93.9 640
45 Siemens 225M 3 x 380-420 D/660-725 Y 83.0 - 77.0 / 48.0 - 44.5 0.86 94.2 640
55 Siemens 250M 3 x 380-420 D/660-725 Y 100 - 93.0 / 58.0 - 54.0 0.87 94.6 680
75 Siemens 280S 3 x 380-420 D/660-725 Y 140-130 / 80.0 - 74.0 0.86 95.0 690
90 Siemens 280M 3 x 380-420 D/660-725 Y 166-152 / 95.0 - 88.0 0.87 95.2 720
110 Siemens 315S 3 x 380-420 D/660-725 Y 200-186 / 116-108 0.87 95.4 680
132 Siemens 315M 3 x 380-420 D/660-725 Y 240-220 / 140-128 0.87 95.6 730
160 Siemens 315L 3 x 380-420 D/660-725 Y 285-265 / 166-154 0.87 95.8 730
200 Siemens 315L 3 x 380-420 D/660-725 Y 355-330 / 206-190 0.88 96.0 740
250 Siemens 315L 3 x 380-420 D/660-725 Y 455-420 / 260-240 0.87 96.0 770
315 Siemens 315L 3 x 380-420 D/660-725 Y 570-550 / 330-320 0.86 96.0 790
355 Siemens 315L 3 x 380-420 D/660-725 Y 650-610 / 375-355 0.85 96.1 650
400 Siemens 355 3 x 380-420 D/660-725 Y 690-690 / 400-400 0.87 96.4 650
500 Siemens 355 3 x 380-420 D/660-725 Y 850-850 / 490-490 0.88 96.7 650
560 Siemens 400 3 x 380-420 D/660-725 Y 950-950 / 550-550 0.88 96.7 650
630 Siemens 400 3 x 380-420 D/660-725 Y 1060-1060 / 610-620 0.88 96.9 680

121
13
Electrical data

MG or Siemens, 6-pole, IE3

Motor P2 Motor Frame Standard voltage I 1/1 η Istart/I1/1
Cos φ 1/1
[kW] type size [V] [A] [%] [%]
11 Siemens 160L 3 x 380-420 D/660-725 Y 23.2 - 21.0 / 13.4 - 12.2 0.80 90.3 660
15 Siemens 180L 3 x 380-420 D/660-725 Y 31.0 - 28.0 / 17.8 - 16.6 0.80 91.2 590
18.5 Siemens 200L 3 x 380-420 D/660-725 Y 38.0 - 36.5 / 22.0 - 21.0 0.79 91.7 560
22 Siemens 200L 3 x 380-420 D/660-725 Y 45.0 - 42.5 / 26.0 - 24.6 0.79 92.2 560
30 Siemens 225M 3 x 380-420 D/660-725 Y 58.0 - 55.0 / 33.5 - 32.0 0.83 92.9 660
37 Siemens 250M 3 x 380-420 D/660-725 Y 70.0 - 65.0 / 40.5 - 37.5 0.85 93.3 700
45 Siemens 280S 3 x 380-420 D/660-725 Y 86.0 - 79.0 / 49.5 - 45.5 0.85 93.7 680
55 Siemens 280M 3 x 380-420 D/660-725 Y 106 - 97.0 / 61.0 - 56.0 0.85 94.1 720
75 Siemens 315S 3 x 380-420 D/660-725 Y 142-134 / 81.0 - 77.0 0.84 94.6 730
90 Siemens 315M 3 x 380-420 D/660-725 Y 168-156 / 97.0 - 90.0 0.85 94.9 670
110 Siemens 315L 3 x 380-420 D/660-725 Y 206-194 / 118-112 0.84 95.1 720
132 Siemens 315L 3 x 380-420 D/660-725 Y 250-236 / 144-136 0.84 95.4 720
160 Siemens 315L 3 x 380-420 D/660-725 Y 300-290 / 174-168 0.83 95.6 770
200 Siemens 315L 3 x 380-420 D/660-725 Y 365-345 / 210-200 0.83 95.8 770
250 Siemens 315L 3 x 380-420 D/660-725 Y 450-440 / 260-250 0.84 95.8 620
315 Siemens 315L 3 x 380-420 D/660-725 Y 590-540 / 340-310 0.85 95.9 650

Other motor brands

The tables show the electrical data of MMG-H
(Wonder) IE2 and IE3 motors.

MMG-H, 2-pole, IE2

P2 Standard voltage I 1/1 η Istart/I1/1
Frame size Cos φ 1/1
[kW] [V] [A] [%] [%]
11 160MA 380-420 D/660-725 Y 20.6 - 18.6 / 11.8 - 10.8 0.90 89.9 750-750
15 160MB 380-420 D/660-725 Y 28.0 - 25.5 / 16.0 - 14.6 0.90 90.7 750-750
18.5 160L 380-420 D/660-725 Y 34.0 - 30.5 / 19.6 - 17.8 0.91 91.2 750-750
22 180M 380-420 D/660-725 Y 40.0 - 36.5 / 23.2 - 21.0 0.91 91.5 750-750
30 200LA 380-420 D/660-725 Y 54.5 - 49.0 / 31.5 - 28.5 0.91 92.2 750-750
37 200LB 380-420 D/660-725 Y 66.5 - 60.5 / 38.5 - 35.0 0.91 92.6 750-750
45 225M 380-420 D/660-725 Y 80.5 - 73.0 / 46.5 - 42.5 0.91 93.1 750-750
55 250MA 380-420 D/660-725 Y 99.5 - 90.0 / 57.0 - 52.0 0.90 93.4 750-750
75 280SA 380-420 D/660-725 Y 134-122 / 76.5 - 70.0 0.91 94.0 750-750
90 280MA 380-420 D/660-725 Y 160-144 / 91.5 - 83.5 0.91 94.5 750-750

MMG-H, 4-pole, IE2

P2 Standard voltage I 1/1 η Istart/I1/1
Frame size Cos φ 1/1
[kW] [V] [A] [%] [%]
7.5 132MA 380-420 D/660-725 Y 15.4 - 14.0 / 8.90 - 8.10 0.83 89.0 820-820
11 160MA 380-420 D/660-725 Y 21.8 - 19.8 / 12.6 - 11.4 0.85 90.3 700-700
15 160L 380-420 D/660-725 Y 29.0 - 26.5 / 16.8 - 15.2 0.86 91.0 750-750
18.5 180MA 380-420 D/660-725 Y 36.0 - 32.5 / 20.6 - 18.8 0.86 91.3 750-750
22 180L 380-420 D/660-725 Y 42.5 - 38.5 / 24.4 - 22.2 0.86 91.8 750-750
30 200LA 380-420 D/660-725 Y 55.5 - 50.0 / 32.0 - 29.0 0.89 92.5 720-720
37 225S 380-420 D/660-725 Y 69.0 - 62.5 / 39.5 - 36.0 0.87 93.9 720-720
45 225M 380-420 D/660-725 Y 84.0 - 76.0 / 48.5 - 44.0 0.87 93.3 720-720
55 250M 380-420 D/660-725 Y 100 - 90.5 / 57.5 - 52.5 0.89 93.9 720-720
75 250MA 380-420 D/660-725 Y 134-126 / 80.0 - 73.0 0.87 94.1 720-720
90 280MA 380-420 D/660-725 Y 168-152 / 96.0 - 87.5 0.87 94.3 720-720
110 315S 380-420 D/660-725 Y 200-182 / 116-106 0.88 94.8 690-690
132 315M 380-420 D/660-725 Y 240-218 / 138-126 0.88 94.9 690-690
160 315L 380-420 D/660-725 Y 290-265 / 168-152 0.88 95.2 690-690
200 315L 380-420 D/660-725 Y 365-330 / 210-190 0.88 95.2 690-690
250 355M 380-420 D/660-725 Y 440-395 / 250-230 0.91 95.3 710-710
315 355L 380-420 D/660-725 Y 560-5100 / 325-295 0.89 95.7 690-690

122
 13

Electrical data
MMG-H, 6-pole, IE2
P2 Standard voltage I 1/1 η Istart/I1/1
Frame size Cos φ 1/1
[kW] [V] [A] [%] [%]
11 160L 380-420 D/660-725 Y 24.2 - 21.8 / 13.8 - 12.6 0.78 88.9 640-640
15 180L 380-420 D/660-725 Y 31.5 - 28.5 / 18.0 - 16.4 0.81 89.9 700-700
18.5 200LA 380-420 D/660-725 Y 38.5 - 34.5 / 22.0 - 20.0 0.81 90.5 700-700
22 200LB 380-420 D/660-725 Y 45.5 - 41.0 / 26.0 - 23.8 0.81 90.9 700-700
30 225M 380-420 D/660-725 Y 59.0 - 53.5 / 34.0 - 31.0 0.84 91.8 700-700
37 250M 380-420 D/660-725 Y 70.0 - 63.5 / 40.5 - 36.5 0.87 92.3 700-700
45 280S 380-420 D/660-725 Y 85.5 - 77.5 / 49.5 - 45.0 0.86 92.8 700-700
55 280MA 380-420 D/660-725 Y 104 - 94.5 / 60.0 - 54.5 0.86 93.2 700-700
75 315S 380-420 D/660-725 Y 142-130 / 82.5 - 75.0 0.85 93.8 730-730
90 315M 380-420 D/660-725 Y 170-154 / 98.5 - 89.5 0.85 94.2 700-700
110 315L 380-420 D/660-725 Y 206-186 / 118-108 0.86 94.4 670-670
132 315L 380-420 D/660-725 Y 246-224 / 142-130 0.86 94.6 670-670

MMG-H, 2-pole, IE3

P2 Standard voltage I 1/1 η Istart/I1/1
Frame size Cos φ 1/1
[kW] [V] [A] [%] [%]
11 160MA 3 x 380-420 D/660-725 Y 20.4 - 18.4 / 11.6 - 10.6 0.9 91.2 760-760
15 160MB 3 x 380-420 D/660-725 Y 27.5 - 24.8 / 15.8 - 14.4 0.9 91.9 770-770
18.5 160L 3 x 380-420 D/660-725 Y 33.5 - 30.5 / 19.2 - 17.6 0.9 92.4 820-820
22 180M 3 x 380-420 D/660-725 Y 40.0 - 36.0 / 23.0 - 20.8 0.9 92.7 870-870
30 200LA 3 x 380-420 D/660-725 Y 55.0 - 49.5 / 31.5 - 29.0 0.9 93.3 900-900
37 200LB 3 x 380-420 D/660-725 Y 66.5 - 60.5 / 38.5 - 35.0 0.9 93.7 900-900
45 225MA 3 x 380-420 D/660-725 Y 80.0 - 72.5 / 46.0 - 42.0 0.9 94.0 830-830
55 250MA 3 x 380-420 D/660-725 Y 102 - 91.0 / 58.0 - 53.0 0.9 94.3 720-720
75 280SA 3 x 380-420 D/660-725 Y 132-120 / 76.0 - 69.5 0.9 94.7 800-800
90 280MA 3 x 380-420 D/660-725 Y 156-142 / 90.0 - 82.0 0.9 95.0 810-810

MMG-H, 4-pole, IE3

P2 Standard voltage I 1/1 η Istart/I1/1
Frame size Cos φ 1/1
[kW] [V] [A] [%] [%]
7.5 132MA 3 x 380-420 /660-725 Y 15.4 - 14.0 / 8.85 - 8.05 0.8 90.4 820-820
11 160MA 3 x 380-420 /660-725 Y 21.2 - 19.2 / 12.2 - 11.2 0.9 91.4 760-760
15 160L 3 x 380-420 /660-725 Y 28.5 - 25.5 / 16.4 - 14.8 0.9 92.1 850-850
18.5 180MA 3 x 380-420 /660-725 Y 35.0 - 31.5 / 20.0 - 18.2 0.9 92.6 690-690
22 180L 3 x 380-420 /660-725 Y 41.5 - 37.5 / 23.8 - 21.8 0.9 93.0 680-680
30 200LA 3 x 380-420 /660-725 Y 56.0 - 50.5 / 32.0 - 29.5 0.9 93.6 690-690
37 225S 3 x 380-420 /660-725 Y 69.0 - 62.5 / 39.5 - 36.0 0.9 93.9 640-640
45 225M 3 x 380-420 /660-725 Y 84.5 - 76.5 / 48.5 - 44.0 0.9 94.2 640-640
55 250M 3 x 380-420 /660-725 Y 102 - 91.5 / 58.0 - 53.0 0.9 94.6 680-680
75 250MA 3 x 380-420 /660-725 Y 140-126 / 80.5 - 73.0 0.9 95.0 690-690
90 280MA 3 x 380-420 /660-725 Y 166-150 / 95.0 - 86.5 0.9 95.2 720-720
110 315S 3 x 380-420 /660-725 Y 202-182 / 116-106 0.9 95.4 680-680
132 315M 3 x 380-420 /660-725 Y 242-218 / 140-126 0.9 95.6 730-730
160 315L 3 x 380-420 /660-725 Y 285-260 / 164-150 0.9 95.8 730-730
200 315L 3 x 380-420 /660-725 Y 355-320 / 204-186 0.9 96.0 740-740

123
14 LS

14. Bare shaft pump

Bare shaft pump

Dimensional sketches
CP YY X
W DNs: Inlet flange
DNd: Outlet flange

HZ
DNs DNd
L

D
G

DH
SH

TM04 1827 1108

4 x Ø HH
BP WS AE
B A
WB

Dimensions
All dimensions are in mm, except for those which have necessary inch tolerances (1 inch = 25.4 mm).
For actual pump flange dimensions, see pages 127-128. For counterflange dimensions, see page 131.

N U (without sleeve) U (with sleeve) Net weight

Pump size DNs DNd SH W WB WS
Sealed Packed [inch] [mm] [inch] [mm] [kg]

LS 65-50-241 65 50 95 65 88.9 0.945 24 1.00 25.40 305 416 216 73

LS 65-50-330 65 50 95 65 88.9 0.945 24 1.00 25.40 305 416 216 95
LS 100-80-241 100 80 95 65 102 0.945 24 1.00 25.40 305 416 216 80
LS 100-80-356 100 80 100 75 127 1.339 34 1.50 38.10 368 508 251 177
LS 125-100-279 125 100 100 63 124 1.339 34 1.50 38.10 368 508 251 164
LS 125-100-305 125 100 100 63 124 1.339 34 1.50 38.10 368 508 251 164
LS 125-100-381 125 100 100 63 159 1.339 34 1.50 38.10 368 543 216 255
LS 125-100-388 125 100 100 63 159 1.50 38.10 1.50 38.10 368 543 216 255
LS 150-125-305 150 125 63 63 165 1.339 34 1.50 38.10 419 572 289 268
LS 150-125-381 150 125 63 63 165 1.339 34 1.50 38.10 432 584 302 318
LS 200-150-305 200 150 63 63 165 1.339 34 1.50 38.10 432 584 302 411
LS 200-150-381 200 150 87 87 184 1.75 44.45 1.75 44.45 508 737 298 455
LS 200-150-4831) 200 150 85 90 171 1.75 44.45 1.75 44.45 489 667 337 534
LS 200-150-4832) 200 150 85 85 171 2.00 50.80 2.00 50.80 489 667 337 534
LS 200-150-508 200 150 98 98 171 2.13 53.98 2.13 53.98 546 724 394 545
LS 250-200-305 250 200 87 87 171 1.75 44.45 1.75 44.45 508 705 330 511
LS 250-200-381 250 200 87 87 178 1.75 44.45 1.75 44.45 518 765 295 568
LS 300-200-489 300 200 135 147 198 2.50 63.50 2.50 63.50 723 994 519 727
LS 300-250-305 300 250 87 87 203 1.75 44.45 1.75 44.45 530 778 308 636
LS 300-250-381 300 250 145 149 254 2.25 57.15 2.25 57.15 600 778 448 991
LS 350-250-498 350 250 165 205 246 3.13 79.38 3.13 79.38 797 1049 594 1436
LS 350-250-630 350 250 160 219 305 3.13 79.38 3.13 79.38 799 1049 594 1905
LS 350-300-508 350 300 112 121 313 2.50 63.50 2.50 63.50 749 994 546 1318
LS 400-350-397 400 350 142 147 320 2.50 63.50 2.50 63.50 723 1052 436 1460
LS 450-350-397 450 350 105 105 285 2.50 63.50 2.50 63.50 773.5 1102.5 486 1460
1) For 55-90 kW, 4-pole and 15-45 kW, 6-pole.
2)
For values above 90 kW, 4-pole.

124
LS
14
Dimensional sketches

Bare shaft pump

CP YY X
DNs: Inlet flange
W DNd: Outlet flange

HZ
DNs DNd
L

D
G

DH
SH

TM04 1827 1108

4 x Ø HH
BP WS AE
B A
WB

Dimensions
All dimensions are in mm, except for those which have necessary inch tolerances (1 inch = 25.4 mm).
For actual pump flange dimensions, see pages 127-128. For counterflange dimensions, see page 131.

CP Key (WxL)
Pump size DNs DNd A AE B BP X YY D DH G ∅HH HZ
Sealed Packed [inch] [mm]
LS 65-50-241 65 50 305 260 222 178 216 216 510 545 178 89 16 19 270 0.31 x 2.17 8 x 55
LS 65-50-330 65 50 305 260 222 178 254 254 510 545 216 89 16 19 355 0.31 x 2.17 8 x 55
LS 100-80-241 100 80 305 260 222 178 279 279 510 545 203 102 19 19 290 0.31 x 2.17 8 x 55
LS 100-80-356 100 80 305 260 279 235 305 305 644 687 254 127 22 19 380 0.39 x 2.2 10 x 56
LS 125-100-279 125 100 305 260 283 235 305 305 631 674 257 124 22 19 370 0.39 x 2.2 10 x 56
LS 125-100-305 125 100 305 260 283 235 305 305 631 674 257 124 22 19 370 0.39 x 2.2 10 x 56
LS 125-100-381 125 100 305 260 349 305 357 357 631 674 330 159 25 19 470 0.39 x 2.2 10 x 56
LS 125-100-388 125 100 305 260 349 305 357 357 631 674 330 159 25 19 470 0.38 x 2.25 9.65 x 57.15
LS 150-125-305 150 125 305 260 305 260 330 330 775 775 368 165 25 19 475 0.39 x 2.2 10 x 56
LS 150-125-381 150 125 305 260 305 260 356 381 801 801 410 165 25 19 550 0.39 x 2.2 10 x 56
LS 200-150-305 200 150 305 260 305 260 356 406 801 801 406 165 25 19 530 0.39 x 2.2 10 x 56
LS 200-150-381 200 150 311 260 457 419 381 406 929 929 464 184 29 19 605 0.38 x 2.25 9.65 x 57.15
LS 200-150-4831) 200 150 305 260 356 305 432 432 888 888 432 171 25 19 615 0.38 x 2.25 9.65 x 57.15
LS 200-150-4832) 200 150 305 260 356 305 432 432 899 899 432 171 25 19 615 0.38 x 3.00 9.65 x 76.20
LS 200-150-508 200 150 318 260 356 305 432 483 995 995 451 171 25 19 660 0.50 x 3.00 12.70 x 76.20
LS 250-200-305 250 200 305 260 394 356 406 432 929 929 438 171 29 19 580 0.38 x 2.25 9.65 x 57.15
LS 250-200-381 250 200 324 260 495 445 483 483 949 949 483 178 29 19 655 0.38 x 2.25 9.65 x 57.15
LS 300-200-489 300 200 648 502 489 406 414 559 1306 1306 529 198 35 29 745 0.63 x 3.00 16.00 x 76.20
LS 300-250-305 300 250 324 260 495 445 495 495 974 974 503 203 29 19 645 0.38 x 2.25 9.65 x 57.15
LS 300-250-381 300 250 457 381 356 305 432 584 1051 1051 508 254 29 22 630 0.50 x 2.75 12.70 x 69.85
LS 350-250-498 350 250 648 502 489 406 508 660 1403 1403 586 246 35 29 785 0.75 x 4.75 19.05 x 120.65
LS 350-250-630 350 250 648 502 489 406 610 711 1377 1377 635 305 35 29 820 0.75 x 4.75 19.05 x 120.65
LS 350-300-508 350 300 648 502 489 406 584 711 1377 1377 643 313 35 29 790 0.63 x 3.00 16.00 x 76.20
LS 400-350-397 400 350 790 610 657 575 550 650 1299 1299 670 320 40 23 800 0.63 x 3.00 16.00 x 76.20
LS 450-350-397 450 350 790 610 655 575 545 625 1400 1400 650 285 35 33 730 0.63 x 3.00 16.00 x 76.20
1)
For 55-90 kW, 4-pole and 15-45 kW, 6-pole.
2) For values above 90 kW, 4-pole.

125
14 LS

Dimensional sketches, LS double stage

Bare shaft pump

CP YY X
DNs: Inlet flange
W
DNd: Outlet flange

N
ØU KW

HZ
KF
DNs
DNd

D
G

SH

DH

TM07 2171 3118

QS
QD
BP WS AA AB
4-ØHH B
A
WB

Dimensions
All dimensions are in mm, except for those which have necessary inch tolerances (1 inch = 25.4 mm).

Pump size DNs DNd HZ A AA AB D BP B DH/SH W WS ∅HH

LS 125-100-370x2 125 100 565 520 200 200 350 210 260 140 540 399 24
LS 150-125-415x2 150 125 632 520 200 200 400 300 360 150 575 385 24
LS 200-150-475x2 200 150 685 740 300 300 500 460 580 240 615 385 28
LS 250-200-575x2 250 200 850 1010 500 350 600 620 720 290 800 490 28

U
Pump size YY X G KW KF N QS QD CP WB
[mm] [inch]
LS 125-100-370x2 350 340 20 44.45 1.75 9.58 48.6 95 107.5 37 980 778
LS 150-125-415x2 370 365 20 44.45 1.75 9.58 48.6 110 100 40 1059 855
LS 200-150-475x2 575 550 30 57.15 2.25 12.7 62.8 100 65 65 1142 905
LS 250-200-575x2 750 600 30 79.38 3.125 19.05 87.7 125 75 75 1496 1160

126
LS
14
Standard pump flange dimensions

Bare shaft pump

PN 16
Some pump flanges have tapped holes due to the pump construction.
EN 1092-2 (DIN 2501)
PN 16

TM04 4474 1309

Dimensions Number of Number of
[mm] free holes tapped holes
(FH) (TH)

Pump type Flange size D1 D2 D3 C SFH STH

DNs 65 76.2 145 191 25.4 19 - 4 -
LS 65-50-241
DNd 50 50.8 125 165 22.2 19 - 4 -
DNs 65 76.2 145 191 25.4 19 - 4 -
LS 65-50-330
DNd 50 50.8 125 165 22.2 19 - 4 -
DNs 100 102 180 254 31.8 19 - 8 -
LS 100-80-241
DNd 80 76.2 160 210 28.6 19 - 8 -
DNs 100 102 180 254 31.8 19 - 8 -
LS 100-80-356
DNd 80 76.2 160 210 28.6 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-279
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-305
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-381
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-388
DNd 100 102 180 254 31.8 19 - 8 -
DNs 150 152 240 318 36.5 23 M20 6 2
LS 150-125-305
DNd 125 127 210 279 34.9 19 - 8 -
DNs 150 152 240 318 36.5 23 - 8 -
LS 150-125-381
DNd 125 127 210 279 34.9 19 - 8 -
DNs 200 203 295 381 41.3 23 M20 10 2
LS 200-150-305
DNd 150 152 240 318 36.5 23 - 8 -
DNs 200 203 295 381 41.3 23 M20 8 4
LS 200-150-381
DNd 150 152 240 318 36.5 23 - 8 -
DNs 200 203 295 381 41.4 - M20 - 12
LS 200-150-483
DNd 150 152 240 318 36.6 23 - 4 4
DNs 200 203 295 381 41.3 23 M20 8 4
LS 200-150-508
DNd 150 152 240 318 36.5 23 - 8 -
DNs 250 254 355 445 47.6 - M24 - 12
LS 250-200-305
DNd 200 203 295 381 41.3 23 M20 8 4
DNs 250 254 355 445 47.8 26 - 12 -
LS 250-200-381
DNd 200 203 295 381 41.4 22 - 12 -
DNs 300 305 410 521 50.8 28 - 12 -
LS 300-200-489
DNd 200 203 295 381 41.3 23 - 12 -
DNs 300 305 410 521 50.8 28 M24 10 2
LS 300-250-305
DNd 250 254 355 445 47.6 28 - 12 -
DNs 300 305 410 521 50.8 28 M24 8 4
LS 300-250-381
DNd 250 254 355 445 47.6 28 - 12 -
DNs 350 356 470 584 53.9 28 - 16 -
LS 350-250-498
DNd 250 254 355 445 47.6 28 - 12 -
DNs 350 356 470 584 54.0 28 - 16 -
LS 350-250-630
DNd 250 254 355 445 47.6 - M24 - 12
DNs 350 356 470 584 54.0 28 - 16 -
LS 350-300-508
DNd 300 305 410 521 50.8 28 - 12 -
DNs 400 400 525 648 50.0 - M27 - 16
LS 400-350-397
DNd 350 350 470 584 45.0 28 - 16 -
DNs 450 450 585 640 40.0 31 M27 14 6
LS 450-350-397
DNd 350 350 470 584 45.0 28 - 16 -

127
14 LS

Optional pump flange dimensions

Bare shaft pump

PN 10
Some pump flanges have tapped holes due to the pump construction.

EN 1092-2 (DIN 2501)

PN 10

TM04 4474 1309

Dimensions Number of Number of
[mm] free holes tapped
(FH) holes (TH)

Pump type Flange size D1 D2 D3 C SFH STH

DNs 65 76.2 145 191 25.4 19 - 4 -
LS 65-50-241
DNd 50 50.8 125 165 22.2 19 - 4 -
DNs 65 76.2 145 191 25.4 19 - 4 -
LS 65-50-330
DNd 50 50.8 125 165 22.2 19 - 4 -
DNs 100 102 180 254 31.8 19 - 8 -
LS 100-80-241
DNd 80 76.2 160 210 28.6 19 - 8 -
DNs 100 102 180 254 31.8 19 - 8 -
LS 100-80-356
DNd 80 76.2 160 210 28.6 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-279
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-305
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-381
DNd 100 102 180 254 31.8 19 - 8 -
DNs 125 127 210 279 34.9 19 - 8 -
LS 125-100-388
DNd 100 102 180 254 31.8 19 - 8 -
DNs 150 152 240 318 36.5 23 M20 6 2
LS 150-125-305
DNd 125 127 210 279 34.9 19 - 8 -
DNs 150 152 240 318 36.5 23 - 8 -
LS 150-125-381
DNd 125 127 210 279 34.9 19 - 8 -
DNs 200 203 295 381 41.3 23 - 8 -
LS 200-150-305
DNd 150 152 240 318 36.5 23 - 8 -
DNs 200 203 295 381 41.3 23 - 8 -
LS 200-150-381
DNd 150 152 240 318 36.5 23 - 8 -
DNs 200 203 295 381 41.4 - M20 - 8
LS 200-150-483
DNd 150 152 240 318 36.6 23 M20 4 4
DNs 200 203 295 381 41.3 23 M20 4 4
LS 200-150-508
DNd 150 152 240 318 36.5 23 - 8 -
DNs 250 254 350 445 47.6 - M20 - 12
LS 250-200-305
DNd 200 203 295 381 41.3 23 M20 4 4
DNs 250 254 350 445 47.8 23 - 12 -
LS 250-200-381
DNd 200 203 295 381 41.4 23 - 8 -
DNs 300 305 400 521 50.8 23 - 12 -
LS 300-200-489
DNd 200 203 295 381 41.3 23 - 8 -
DNs 300 305 400 521 50.8 23 M20 10 2
LS 300-250-305
DNd 250 254 350 445 47.6 23 - 12 -
DNs 300 305 400 521 50.8 23 M20 8 4
LS 300-250-381
DNd 250 254 350 445 47.6 23 - 12 -
DNs 350 356 460 584 53.9 23 - 16 -
LS 350-250-498
DNd 250 254 350 445 47.6 23 - 12 -
DNs 350 356 460 584 54.0 23 - 16 -
LS 350-250-630
DNd 250 254 350 445 47.6 - M20 - 12
DNs 350 356 460 584 54.0 23 - 16 -
LS 350-300-508
DNd 300 305 400 521 50.8 23 - 12 -
DNs 400 400 515 648 50.0 - M24 - 16
LS 400-350-397
DNd 350 350 460 584 45.0 23 - 16 -
DNs 450 450 565 615 40.0 28 M24 16 4
LS 450-350-397
DNd 350 350 460 584 45.0 23 - 16 -

128
LS
14
ANSI 125

Bare shaft pump

Some pump flanges have tapped holes due to the pump construction.

ANSI 125

TM04 4474 1309

Dimensions
Number of Number of
free holes tapped holes
(FH) (TH)

Nominal D1 D2 D3 C SFH STH

Pump type
pipe size [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch]
NPSs 2 1/2 76.2 3.0 140 5.50 191 7.50 25.4 1.00 19.1 0.75 - 4 -
LS 65-50-241
NPSd 2 50.8 2.0 121 4.75 165 6.50 22.2 0.88 19.1 0.75 - 4 -
NPSs 2 1/2 76.2 3.0 140 5.50 191 7.50 25.4 1.00 19.1 0.75 - 4 -
LS 65-50-330
NPSd 2 50.8 2.0 121 4.75 165 6.50 22.2 0.88 19.1 0.75 - 4 -
NPSs 4 102 4.0 191 7.50 254 10.00 31.8 1.25 19.1 0.75 - 8 -
LS 100-80-241
NPSd 3 76.2 3.0 152 6.00 210 8.25 28.6 1.13 19.1 0.75 - 4 -
NPSs 4 102 4.0 191 7.50 254 10.00 31.8 1.25 - - 5/8-11 UNC - 8
LS 100-80-356
NPSd 3 76.2 3.0 152 6.00 210 8.25 28.6 1.13 19.1 0.75 - 4 -
NPSs 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 6 2
LS 125-100-279
NPSd 4 102 4.0 191 7.50 254 10.00 31.8 1.25 19.1 0.75 - 8 -
NPSs 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 6 2
LS 125-100-305
NPSd 4 102 4.0 191 7.50 254 10.00 31.8 1.25 19.1 0.75 - 8 -
NPSs 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 4 4
LS 125-100-381
NPSd 4 102 4.0 191 7.50 254 10.00 31.8 1.25 19.1 0.75 - 8 -
NPSs 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 4 4
LS 125-100-388
NPSd 4 102 4.0 191 7.50 254 10.00 31.8 1.25 19.1 0.75 - 8 -
NPSs 6 152 6.0 241 9.50 318 12.50 36.5 1.44 - - 3/4-10 UNC - 8
LS 150-125-305
NPSd 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 - 8 -
NPSs 6 152 6.0 241 9.50 318 12.50 36.5 1.44 22.4 0.88 - 8 -
LS 150-125-381
NPSd 5 127 5.0 216 8.50 279 11.00 34.9 1.38 22.4 0.88 - 8 -
NPSs 8 203 8.0 298 11.75 381 15.00 41.3 1.63 22.4 0.88 - 8 -
LS 200-150-305
NPSd 6 152 6.0 241 9.50 318 12.50 36.5 1.44 22.4 0.88 - 8 -
NPSs 8 203 8.0 298 11.75 381 15.00 41.3 1.63 22.4 0.88 3/4-10 UNC 4 4
LS 200-150-381
NPSd 6 152 6.0 241 9.50 318 12.50 36.5 1.44 22.4 0.88 - 8 -
NPSs 8 203 8.0 298 11.75 381 15.00 41.4 1.63 - - 3/4-10 UNC - 8
LS 200-150-483
NPSd 6 152 6.0 241 9.50 318 12.50 36.6 1.44 22.4 0.88 - 8 -
NPSs 8 203 8.0 298 11.75 381 15.00 41.3 1.63 22.4 0.88 - 8 -
LS 200-150-508
NPSd 6 152 6.0 241 9.50 318 12.50 36.5 1.44 22.4 0.88 - 8 -
NPSs 10 254 10.0 362 14.25 445 17.50 47.6 1.88 25.4 1.00 - 12 -
LS 250-200-305
NPSd 8 203 8.0 298 11.75 381 15.00 41.3 1.63 22.4 0.88 - 8 -
NPSs 10 254 10.0 362 14.25 445 17.50 47.8 1.88 25.4 1.00 - 12 -
LS 250-200-381
NPSd 8 203 8.0 298 11.75 381 15.00 41.4 1.63 22.4 0.88 - 8 -
NPSs 12 305 12.0 432 17.00 521 20.50 50.8 2.00 25.4 1.00 - 12 -
LS 300-200-489
NPSd 8 203 8.0 298 11.75 381 15.00 41.4 1.63 22.4 0.88 - 8 -
NPSs 12 305 12.0 432 17.00 521 20.50 50.8 2.00 25.4 1.00 - 12 -
LS 300-250-305
NPSd 10 254 10.0 362 14.25 445 17.50 47.6 1.88 25.4 1.00 - 12 -
NPSs 12 305 12.0 432 17.00 521 20.50 50.8 2.00 25.4 1.00 - 12 -
LS 300-250-381
NPSd 10 254 10.0 362 14.25 445 17.50 47.6 1.88 25.4 1.00 - 12 -
NPSs 14 356 14.0 476 18.75 584 23.00 53.9 2.12 28.5 1.12 - 12 -
LS 350-250-498
NPSd 10 254 10.0 362 14.25 445 17.50 47.6 1.88 25.4 1.00 - 12 -
NPSs 14 356 14.0 476 18.75 584 23.00 54.0 2.13 28.5 1.12 - 12 -
LS 350-250-630
NPSd 10 254 10.0 362 14.25 445 17.50 47.6 1.88 25.4 1.00 - 12 -
NPSs 14 356 14.0 476 18.75 584 23.00 54.0 2.13 28.5 1.12 - 12 -
LS 350-300-508
NPSd 12 305 12.0 432 17.00 521 20.50 50.8 2.00 25.4 1.00 - 12 -
NPSs 16 400 15.7 540 21.25 648 25.51 50.0 1.97 28.5 1.12 1-8 UNC 12 4
LS 400-350-497
NPSd 14 350 13.8 476 18.75 584 22.99 45.0 1.77 28.5 1.12 - 12 -
NPSs 18 458 18.0 578 22.75 635 25.00 40.0 1.57 31.75 1.25 1 1/8-7 UNC 12 4
LS 450-350-397
NPSd 14 350 13.8 476 18.75 584 22.99 45.0 1.77 28.5 1.12 - 12 -

129
14 LS

ANSI 250
Bare shaft pump

Some pump flanges have tapped holes due to the pump construction.

ANSI 250

TM04 4474 1309

Dimensions
Number of Number of
free holes tapped holes
(FH) (TH)

Nominal D1 D2 D3 C SFH STH

Pump type
pipe size [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch]
NPSs 2 1/2 76.2 3.0 149 5.88 191 7.50 25.4 1.00 22.4 0.88 3/4-10 UNC 6 2
LS 65-50-241
NPSd 2 50.8 2.0 127 5.00 165 6.50 22.2 0.88 19.1 0.75 5/8-11 UNC 6 2
NPSs 2 1/2 76.2 3.0 149 5.88 191 7.50 25.4 1.00 22.4 0.88 - 4 -
LS 65-50-330
NPSd 2 50.8 2.0 127 5.00 165 6.50 22.2 0.88 19.1 0.75 - 4 -
NPSs 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 - 8 -
LS 100-80-241
NPSd 3 76.2 3.0 168 6.62 210 8.25 28.6 1.13 22.4 0.88 - 8 -
NPSs 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 3/4-10 UNC 6 2
LS 100-80-356
NPSd 3 76.2 3.0 168 6.62 210 8.25 28.6 1.13 22.4 0.88 - 8 -
NPSs 5 127 5.0 235 9.25 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 6 2
LS 125-100-279
NPSd 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 - 8 -
NPSs 5 127 5.0 235 9.25 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 6 2
LS 125-100-305
NPSd 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 - 8 -
NPSs 5 127 5.0 235 9.25 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 4 4
LS 125-100-381
NPSd 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 - 8 -
NPSs 5 127 5.0 235 9.25 279 11.00 34.9 1.38 22.4 0.88 3/4-10 UNC 4 4
LS 125-100-388
NPSd 4 102 4.0 200 7.88 254 10.00 31.8 1.25 22.4 0.88 - 8 -
NPSs 6 152 6.0 270 10.62 318 12.50 36.5 1.44 22.4 0.88 3/4-10 UNC 10 2
LS 150-125-305
NPSd 5 127 5.0 235 9.25 279 11.00 34.4 1.35 22.4 0.88 - 8 -
NPSs 6 152 6.0 270 10.62 318 12.50 36.5 1.44 22.4 0.88 - 12 -
LS 150-125-381
NPSd 5 127 5.0 235 9.25 279 11.00 34.4 1.35 22.4 0.88 - 8 -
NPSs 8 203 8.0 330 13.00 381 15.00 41.3 1.63 25.4 1.00 - 12 -
LS 200-150-305
NPSd 6 152 6.0 270 10.62 318 12.50 36.5 1.44 22.4 0.88 - 12 -
NPSs 8 203 8.0 330 13.00 381 15.00 41.3 1.63 25.4 1.00 - 12 -
LS 200-150-381
NPSd 6 152 6.0 270 10.62 318 12.50 36.5 1.44 22.4 0.88 - 12 -
NPSs 8 203 8.0 330 13.00 381 15.00 41.4 1.63 - - 7/8-9 UNC - 12
LS 200-150-483
NPSd 6 152 6.0 270 10.62 318 12.50 36.6 1.44 22.4 0.88 - 12 -
NPSs 8 203 8.0 330 13.00 381 15.00 41.3 1.63 25.4 1.00 - 12 -
LS 200-150-508
NPSd 6 152 6.0 270 10.62 318 12.50 36.5 1.44 22.4 0.88 - 12 -
NPSs 10 254 10.0 387 15.25 445 17.50 47.6 1.88 28.6 1.13 1-8 UNC 12 4
LS 250-200-305
NPSd 8 203 8.0 330 13.00 381 15.00 41.3 1.63 25.4 1.00 7/8-9 UNC 8 4
NPSs 10 254 10.0 387 15.25 445 17.50 47.8 1.88 28.6 1.13 - 16 -
LS 250-200-381
NPSd 8 203 8.0 330 13.00 381 15.00 41.4 1.63 25.4 1.00 - 12 -
NPSs 12 305 12.0 451 17.75 521 20.50 50.8 2.00 31.8 1.25 - 16 -
LS 300-200-489
NPSd 8 203 8.0 330 13.00 381 15.00 41.4 1.63 25.4 1.00 - 12 -
NPSs 12 305 12.0 451 17.75 521 20.50 50.8 2.00 31.8 1.25 - 16 -
LS 300-250-305
NPSd 10 254 10.0 387 15.25 445 17.50 47.6 1.88 28.5 1.12 - 16 -
NPSs 12 305 12.0 451 17.75 521 20.50 50.8 2.00 31.8 1.25 - 16 -
LS 300-250-381
NPSd 10 254 10.0 387 15.25 445 17.50 47.6 1.88 28.5 1.12 - 16 -
NPSs 14 356 14.0 514 20.25 584 23.00 53.9 2.12 31.8 1.25 - 20 -
LS 350-250-498
NPSd 10 254 10.0 387 15.25 445 17.50 47.6 1.88 28.5 1.12 - 16 -
NPSs 14 356 14.0 514 20.25 584 23.00 54.0 2.13 31.8 1.25 - 20 -
LS 350-250-630
NPSd 10 254 10.0 387 15.25 445 17.50 47.6 1.88 28.5 1.12 - 16 -
NPSs 14 356 14.0 514 20.25 584 23.00 54.0 2.13 31.8 1.25 - 20 -
LS 350-300-508
NPSd 12 305 12.0 451 17.75 521 20.50 50.8 2.00 31.8 1.25 - 16 -
NPSs 16 400 15.7 572 22.50 648 25.51 50.0 1.97 35.1 1.38 1 1/8-7 UNC 16 4
LS 400-350-497
NPSd 14 350 13.8 514 20.25 584 22.99 45.0 1.77 31.8 1.25 1 1/8-7 UNC 16 4
NPSs 18 458 18.0 592 23.31 711.2 28.00 50.0 1.97 35.0 1.38 1 1/4-7 UNC 24 -
LS 450-350-397
NPSd 14 350 13.8 514 20.25 584 22.99 45.0 1.77 31.8 1.25 1 1/8-7 UNC 16 4

130
LS
14
Counterflange dimensions

Bare shaft pump

The following tables show standard dimensions for counterflanges.
Counterflanges to EN 1092-2 (DIN 2501), PN 16

Nominal flange diameter (DN)

[mm]

50 65 80 100 125 150 200 250 300 350 450

D1
S

D1 50 65 80 100 125 150 200 250 300 350 450

D2 125 145 160 180 210 240 295 355 410 470 585
TM02 7720 3803

D3 165 185 200 220 250 285 340 400 455 520 640

S 4 x 19 4 x 19 8 x 19 8 x 19 8 x 19 8 x 23 12 x 23 12 x 28 12 x 28 16 x 28 20 x 16
D2
D3 Bolt size M16 M16 M16 M16 M16 M20 M20 M24 M24 M24 M27

Counterflanges to EN 1092-2 (DIN 2501), PN 10

Nominal flange diameter (DN)

[mm]

50 65 80 100 125 150 200 250 300 350 450

D1
S

D1 50 65 80 100 125 150 200 250 300 350 450

D2 125 145 160 180 210 240 295 350 400 460 565
TM02 7720 3803

D3 165 185 200 220 250 285 340 395 445 505 615

S 4 x 19 4 x 19 8 x 19 8 x 19 8 x 19 8 x 23 8 x 23 12 x 23 12 x 23 16 x 23 20 x 16
D2
D3 Bolt size M16 M16 M16 M16 M16 M20 M20 M20 M20 M20 M24

Counterflanges to ANSI 125

Nominal flange diameter (NPS)

2 2 1/2 3 4 5 6 8 10 12 14 18

[mm] 50.8 63.5 76.2 102 127 152 203 254 305 356 457.2
D1 D1
[inch] 2 2.5 3 4 5 6 8 10 12 14 18
S

[mm] 121 140 152 191 216 241 298 362 432 476 580
D2
[inch] 4.75 5.5 6 7.5 8.5 9.5 11.8 14.3 17 18.8 22.75

[mm] 152 178 191 229 254 279 343 406 483 533 635
D2 D3
[inch] 6 7 7.5 9 10 11 13.5 16 19 21 25
TM02 7720 3803

D3
[mm] 4 x 19.1 4 x 19.1 4 x 19.1 8 x 19.1 8 x 22.4 8 x 22.4 8 x 22.4 12 x 25.4 12 x 25.4 12 x 28.5 16 x 31.75
S
[inch] 4 x 0.75 4 x 0.75 4 x 0.75 8 x 0.75 8 x 0.88 8 x 0.88 8 x 0.88 12 x 1.00 12 x 1.00 12 x 1.12 16 x 1.25

Bolt size 5/8" 5/8" 5/8" 5/8" 3/4" 3/4" 3/4" 7/8" 7/8" 1" 1 1/8"

Counterflanges to ANSI 250

Nominal flange diameter (NPS)

2 2 1/2 3 4 5 6 8 10 12 14 18

[mm] 50.8 63.5 76.2 102 127 152 203 254 305 337 457.2
D1 D1
[inch] 2 2.5 3 4 5 6 8 10 12 13.3 18
S

[mm] 127 149 168 200 235 270 330 387 451 514 592
D2
[inch] 5 5.88 6.62 7.88 9.25 10.6 13 15.3 17.8 20.3 23.31

[mm] 165 191 210 254 279 318 381 445 521 584 711.2
D2 D3
[inch] 6.5 7.5 8.25 10 11 12.5 15 17.5 20.5 23 28
TM02 7720 3803

D3
[mm] 8 x 19.1 8 x 22.4 8 x 22.4 8 x 22.4 8 x 22.4 12 x 22.4 12 x 25.4 16 x 28.5 16 x 31.8 20 x 31.8 24 x 35.1
S
[inch] 8 x 0.75 8 x 0.88 8 x 0.88 8 x 0.88 8 x 0.88 12 x 0.88 12 x 1.00 16 x 1.12 16 x 1.25 20 x 1.25 24 x 1.38

Bolt size 5/8" 3/4" 3/4" 3/4" 3/4" 3/4" 7/8" 1" 1 1/8" 1 1/8" 1 1/4"

131
14 LS

Tap and drain plug dimensions

Bare shaft pump

Pump model Outlet gauge tap 20C Inlet gauge tap 20B Case drain 20A Outlet vent 17 (Dome) Inlet vent 20E (Dome)
LS 65-50-241 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 65-50-330 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 100-80-241 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 100-80-356 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 125-100-279 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 125-100-305 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 125-100-381 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 125-100-388 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 150-125-305 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 150-125-381 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 200-150-305 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 200-150-381 (2) 1/4 (2) 1/4 (4) 1/2 1/2 (4) 1/4
LS 200-150-483 1/4 1/4 (4) 1/2 1/2 (2) 1/4; (2) 1/2
LS 200-150-508 (2) 1/4 (2) 1/4 (4) 1/2 1/2 (4) 1/4
LS 250-200-305 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 250-200-381 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 300-200-489 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 300-250-305 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 300-250-381 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 350-250-498 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 350-250-630 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 350-300-508 1/4 1/4 (4) 1/2 1/2 (4) 1/4
LS 400-350-397 (2) 1/4 (2) 1/4 (4) 1/2 1/2 (4) 1/4
LS 450-350-397 (2) 1/4 (2) 1/4 (4) 1/2 1/2 (4) 1/4

All sizes shown are NPT standard tapered pipe threads (inch).
All quantities are one unless otherwise noted.

132
LS
15

15. Other motor brands

Other motor brands

Dimensional correction tables
The tables show corrections to the dimensional tables MMG-H, IE3 motors, 2-pole
for MMG-H (Wonder) IE2 and IE3 motors.
P2 HM C Net weight
If MMG-H motors are selected, the dimensions on
[kW] [mm] [kg]
pages 32 to 105 must be corrected according to the
tables below. 11 45 33 17
15 45 33 14
MMG-H, IE2 motors, 2-pole 18.5 45 33 18
22 61 39 38
P2 HM C Net weight 30 -23 59 -17
[kW] [mm] [kg] 37 -23 34 -23
11 89 33 23 45 -23 2 -28
15 89 33 21 55 -38 28 -23
18.5 89 33 24 75 -32 8 -15
22 105 39 45 90 -32 -50 -65
30 -13 59 13
MMG-H, IE3 motors, 4-pole
37 -13 34 2
45 -10 2 -18 HM C
P2 Net weight
55 -20 28 -3
[kW] [mm] [kg]
75 -31 8 5
90 -31 -50 -45 1.5 35 -39 -2
2.2 35 -20 -2
MMG-H, IE2 motors, 4-pole 3 35 -20 0
4 34 -47 -11
P2 HA HB HE HF HM ∅MU C Net weight 5.5 29 -29 -9
[kW] [mm] [kg] 7.5 29 -41 -12
1.5 0 0 0 0 35 0 -39 -1 11 45 -41 13
2.2 0 0 0 0 35 0 -20 -3 15 45 -27 12
3 0 0 0 0 35 0 -20 0 18.5 -21 22 5
4 0 0 0 0 34 0 -47 -5 22 -21 30 4
5.5 0 0 0 0 63 0 -29 -9 30 -23 34 -5
7.5 0 0 0 0 63 0 -41 -12 37 -23 37 -10
11 0 0 0 0 89 0 33 17 45 -23 2 -9
15 0 0 0 0 89 0 3 17 55 -38 28 -55
18.5 0 0 0 0 7 0 21 44 75 -32 8 -75
22 0 0 0 0 7 0 8 38 90 -32 -50 -85
30 0 0 0 0 -13 0 60 10 110 -15 153 141
37 0 0 0 0 -10 0 36 0 132 -15 98 27
45 0 0 0 0 -10 0 1 -4 160 -15 98 65
55 0 0 0 0 -20 0 -42 -75 200 -15 -57 -20
75 0 0 0 0 -31 0 8 -60
90 0 0 0 0 -31 0 -50 -70
110 0 0 0 0 5 0 133 121
132 0 0 0 0 5 0 83 52
160 0 0 0 0 5 0 83 -15
200 0 0 0 0 5 0 -57 -100
250 50 75 50 37.5 214 10 130 440
315 50 75 50 37.5 214 10 130 480

MMG-H, IE2 motors, 6-pole

P2 HM C Net weight
[kW] [mm] [kg]

11 52 30 28
15 7 8 -1
18.5 -13 60 9
22 -13 3 -12
30 -10 1 -29
37 -20 28 -25
45 -31 8 -50
55 -31 60 -25
75 5 133 105
90 5 83 15
110 5 83 110
132 5 -57 0

133
16 LS

16. Grundfos GO
Grundfos GO

Mobile solution for professionals on the GO!

Grundfos GO is the mobile tool box for professional users on the go. It is the most comprehensive platform for mobile
pump control and pump selection, including sizing, replacement and documentation. It offers intuitive, handheld
assistance and access to Grundfos online tools, and it saves valuable time for reporting and data collection.

GET IT ON

134
LS
17

17. Grundfos Product Center

Grundfos Product Center

Online search and sizing tool to help you
make the right choice.

[Link]

This drop-down menu enables you to set the "REPLACEMENT" enables you to find a
search function to "Products" or "Literature". replacement product. Search results will
include information on the following:

• the lowest purchase price

"SIZING" enables you to size a
• the lowest energy consumption
pump based on entered data and
• the lowest total life cycle cost.
selection choices.

"LIQUIDS" enables you to find

"CATALOGUE" gives you pumps designed for aggressive,
access to the Grundfos flammable or other special
product catalogue. liquids.

All the information you need in one place Downloads

Performance curves, technical specifications, pictures, dimensional drawings, motor On the product pages, you can download
curves, wiring diagrams, spare parts, service kits, 3D drawings, documents, system parts. installation and operating instructions, data
The Product Center displays any recent and saved items - including complete projects - booklets, service instructions, etc. in PDF format.
right on the main page.

135
 ECM: 1256730
99536992 0319

GRUNDFOS A/S

[Link]
Telephone: +45 87 50 14 00
DK-8850 Bjerringbro . Denmark
Trademarks displayed in this material, including but not limited to Grundfos, the Grundfos logo and “be think innovate” are registered trademarks owned by The Grundfos Group. All rights reserved. © 2019 Grundfos Holding A/S, all rights reserved.