Jensen

A Swagelok® Company

Jenflo®
Series Pumps
Sanitary
Centrifugal Pumps
 Close-Coupled Sanitary
Centrifugal Pumps
3A Sanitary 316 Stainless Steel
Centrifugal Pumps for the Food, Dairy,
Beverage, Pharmaceutical
and Related Industries.

Full 360 Degree Casing

Rotation for Outlet
Location Adjustment

Easy Take Down

Encapsulated Acorn
Style Impeller Nut

316
Stainless Impeller
Steel

Several Seal And

Elastomer Options

Common Seal For

All Pump Models

Table of Contents Back-plate

Jenflo Series Features & Benefits . . . . . . . . . . . . . . . . . .2

Jenflo Series Models & Specifications . . . . . . . . . . . . . . .3
How to Select Jenflo Series Pumps . . . . . . . . . . . . . . . . .4
Heavy-Duty Stub
Performance Curve Envelopes . . . . . . . . . . . . . . . . . . . .5 Shaft with Wide
Jenflo Series Performance Curves . . . . . . . . . . . . . . . . . .6 Thread

Friction Loss Table . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Adapter & Stub Shaft
NPSH, Friction Loss & Tech Data . . . . . . . . . . . . . . . . .19 for Standard Nema Clear Plastic
C-Face Motors Shaft Guard
Fluid Viscosities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Jenflo Series Component Parts & Key #s . . . . . . . . . . .21
Jenflo Series Dimensions . . . . . . . . . . . . . . . . . . . . . . .22
Jenflo Series Model #s, Options & Features . . . . . . . . .23

2
• All Wetted Parts Are Electro-Polished (Standard)
• Several Interchangeable Parts Throughout Pump Line
• Pump To Flow Rates Over 700 GPM, (350,000 lbs/hr)
• Head Pressure Over 300 ft (130 psig)
• Clean In Place Without Disassembling, Cost Effective,
Low Noise, Tight Tolerance, High Efficiency and Low Net
Positive Suction Head Requirements

Specifications
Pump Standard Standard Maximum Impeller Maximum Impeller
Model Inlet Outlet Diameter Inches Diameter Inches
Number Inches Inches (Nominal) (Actual)
JF114 1 1/2” 1 1/2” 4” 4.134”
JF216 2” 1 1/2” 6” 5.709”
JF326 3” 2” 6” 5.709” Type DG Seal Internal
JF118 1 1/2” 1 1/2” 8” 7.874”
The long life internal mounted mechanical seals
JF328 3” 2” 8” 7.874”
are interchangeable throughout the pump line;
JF438 4” 3” 8” 7.992”
reducing your inventory, carbon vs. silicon carbide
Optional Port Sizes Are Available As Specials.
is standard. Hardened seal faces such as silicon
carbide are also available.
Temperature Rating
250°F (121°C)

Port Connections
Kwik Clamp Standard
Other Options Available
Enlarged Ports Available (Special) Refer to table below and the corresponding notes for
maximum value limits (viscosity, temperature, pressure...).
Finish
Field of application
Electropolished Standard
JENSEN JENFLO PUMPS
Materials
60 Hz
Casing, impeller, stub-shaft and back-plate 316
Flow Rate 700 gpm
Stainless Steel. Adapter is cast iron (painted) stan-
dard elastomer is EPDM. Differential Pressure 138 psig
Suction Pressure 58 psig
Motor Temperature 250°F
Comes equipped with stainless steel adjustable Recommended Viscosity 250 CPs
legs. Single phase 115/230 volt; 1750 and 3500 Speed 3500 RPM
RPM. Three phase 230/460 volt; 1750 and 3500 ATTENTION The following limits should be considered for these options:
RPM. TEFC, TEFC-EZ, washdown, explosion-proof,
-EPDM elastomers: maximum temperature 250°F
energy-efficient and others available.

3
Figure 1: Jenflo 3500 RPM Composition – How to Select
Curve Envelopes
Jenflo Series Pumps
HEAD IN
PSI FEET The following information is required:
151.6 350 *Required Flow Rate In Gallons Per Minute or lbs/hr.
129.9 300
*Head Pressure In psi or ft of head.
86.6 200 JF118
JF328 Note: Refer to friction loss tables on page 18 and 19
65.0 150
for calculating head pressure to ensure selection of
43.3 100 the proper centrifugal pump.
34.6 80 X JF216
Proceed as follows:
26.0 60 JF326
21.7 50
From performance curve envelopes for the JF114,
17.3 40 JF114 216, 326, 118, 328 and 438 on page 5 operating
13.0 30
at 3500 and 1750 RPM select pump speed and size.
JF438 Proceed then to the individual pump curves pages
8.7 20 6 through 17 to select impeller size and horsepower.

For example:
GPM 20 40 60 100 150 200 250 300 400 500 650 800 Application: 60 GPM against 40 PSI
LBS PER HOUR 10,000 20,000 50,000 100,000 200,000 400,000

Solution:
1. Find where the horizontal line for 40 PSI (92.4’)
Figure 2: Performance Curve pressure intersects the vertical line for 60 GPM
Size JF216 Speed 3500RPM Inlet 2" – Outlet 11⁄2" (30,000 lbs/hr) flow rate. (see figure 1) as you can see
the correct size and speed is (JF216 at 3500 RPM).
HEAD IN
PSI FEET 2. Now proceed to individual pump curve. Find where
86.6 200
the horizontal line for 40 PSI (92.4’) pressure intersects
the vertical line for 60 GPM (30,000 lbs/hr) flow rate.
(see figure 2).
69.3 160
5.709" IM
PELLER
DIA METE
3. To find impeller size required refer to the impeller size
5.512" R
curve directly above the intersection marked X (5.118”
52.0 120 5.118" impeller).
HE
AD
4.724" CA
PA 4. To find the motor horsepower required refer to
CIT
Y
4.331" 5HP 71/2 HP horsepower curve to the upper right. (see figure 2)
34.7 80 3 HP
5 hp is required).

17.3 40

0 0 20 (ft)

15
ED
IR NPSHr
RE QU 10
NPSH

0
GPM 0 25 50 75 100 125 150 175 200
LBS PER HOUR 0 12,500 25,000 37,500 50,000 62,500 75,000 87,500 100,000

4
Jenflo Series 3500 RPM
Composite Performance Curve
Centrifugal Pump
Composite Performance PSI
HEAD IN
FEET

Curve Envelopes 151.6

129.9
350
300

86.6 200 JF118

JF328
65.0 150

43.3 100
34.6 80 JF216
26.0 60 JF326
21.7 50
17.3 40 JF114
13.0 30
JF438
8.7 20

GPM 20 40 60 100 150 200 250 300 400 500 650 800
LBS PER HOUR 10,000 20,000 30,000 50,000 100,000 200,000 400,000

1750 RPM
Composite Performance Curve

HEAD IN
PSI FEET
34.7 80

26.0 60
21.7 50 JF118 JF328
17.3 40

13.0 30

JF216
8.7 20

JF326

4.3 10
JF114 JF438

2.2 5

GPM 10 20 40 60 100 150 200 250 300 400

LBS PER HOUR 5,000 10,000 20,000 30,000 50,000 100,000 200,000

5
 Jenflo Series Pumps
Performance Curve
Size JF114 Speed 1750RPM Inlet 11⁄2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

8.6 20

4.13
4" I
MP
ELL
ER
DIA
ME
TE
R
6.5 15
3.740"

3.346"

4.3 10
2.953"
HE
AD
CA
PA
CI

2.2 5
TY

14
/ HP

0 4 (ft)

IRED
NPSH REQU 2 NPSHr

0
GPM 0 10 20 30 40 50
LBS PER HOUR 0 5,000 10,000 15,000 20,000 25,000

6
Jenflo Series Pumps
Performance Curve
Size JF216 Speed 1750RPM Inlet 2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

21.7 50

17.3 40 5.709"
IMPEL
LER
DIA
5.512" MET
ER

5.118"
13.0 30
HE
4.724" AD
CA
PA
CI
TY
8.6 20
4.331"

3 4 / HP
1 2
/ HP

4.3 10

0 6 (ft)

4
NPSHr
R ED
Q UI
H RE
NPS 2

0
GPM 0 20 40 60 80 100 120
LBS PER HOUR 0 10,000 20,000 30,000 40,000 50,000 60,000

7
 Jenflo Series Pumps
Performance Curve
Size JF326 Speed 1750RPM Inlet 3" – Outlet 2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

21.7 50

5.709" IMPELLER DIAME

TER
17.3 40

5.315" HE
AD
CA
PA
CIT
13.0 30 Y
4.921" 2HP

11/2 HP
4.528"
8.6 20

1HP

4.3 10

0 4 (ft)

IRED
NPS H REQU

2 NPSHr

0
GPM 0 25 50 75 100 125 150 175
LBS PER HOUR 0 12,500 25,000 37,000 50,000 62,500 75,000 87,500

8
Jenflo Series Pumps
Performance Curve
Size JF118 Speed 1750RPM Inlet 11⁄2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

34.7 80

30.3 70
7.8
74"
IMP
ELL
3.740" ER
26.0 60 DIA
ME
TE
R
7.087"

21.7 50
HE
AD
CA
6.299" PA
CI
TY
17.3 40 11/2 HP

5.512"
1HP
13.0 30

12
/ HP
8.6 20

4.3 10

0 7.5 (ft)

5
D
IRE NPSHr
R EQU
NPSH 2.5

GPM 0 20 40 60 80 100 120

LBS PER HOUR 0 10,000 20,000 30,000 40,000 50,000 60,000

9
 Jenflo Series Pumps
Performance Curve
Size JF328 Speed 1750RPM Inlet 3" – Outlet 2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

34.7 80

7.874" IMPE
LLER DIAMET
ER
30.3 70
7.480"
HEA
DC
APA
26.0 60 7.087" CIT
Y

6.693"
21.7 50
6.299"
3HP
5.906" 2HP
17.3 40
5.512" 11/2 HP
1HP
13.0 30

8.6 20

4.3 10

0 5 (ft)
4

ED 3
QUIR
NPSH RE
NPSHr
2
1

0
GPM 0 25 50 75 100 125 150 175 200
LBS PER HOUR 0 12,500 25,000 37,500 50,000 62,500 75,000 87,500 100,000

10
Jenflo Series Pumps
Performance Curve
Size JF438 Speed 1750RPM Inlet 4" – Outlet 3"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

7.992" IM
34.7 80 PELLER
D IAME
TER
HEA
7.480" DC
APA
30.3 70 CIT
Y
5 HP
7.087"

26.0 60
3 HP

6.299" 2 HP
21.7 50
11/2 HP

5.512"
17.3 40

13.0 30

8.6 20

4.3 10

0 0 5 (ft)

IRED
NPSH REQU
NPSHr

0 0 0
GPM 0 50 100 150 200 250 300 350 400 450
LBS PER HOUR 0 25,000 50,000 75,000 100,000 125,000 150,000 175,000 200,000 225,000

11
 Jenflo Series Pumps
Performance Curve
Size JF114 Speed 3500RPM Inlet 11⁄2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

34.7 80

4.13
4" I
30.3 70
MP
E LL
ER
DI
AM
ET
3.740" ER
26.0 60

21.7 50
3.346"
HE
AD
CA
PA

17.3 40
CI
TY

2.953"1/2 HP
2HP
13.0 30
1 / HP
12

1HP

8.6 20

4.3 10

0 30 (ft)

ED
E Q UIR
20
NP S H R NPSHr

10

0
GPM 0 20 40 60 80 100 120
LBS PER HOUR 0 10,000 20,000 30,000 40,000 50,000 60,000

12
Jenflo Series Pumps
Performance Curve
Size JF216 Speed 3500RPM Inlet 2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

86.6 200

69.3 160
5.709" IM
PELLER
DIAM
5.512" ETER

52.0 120 5.118"

HE
AD
4.724" CA
PA
CIT
Y
4.331" 5HP 7 /2 HP
1
34.7 80 3 HP

17.3 40

0 0 20 (ft)

15
ED
UIR NPSHr
EQ 10
NP SH R

0
GPM 0 25 50 75 100 125 150 175 200
LBS PER HOUR 0 12,500 25,000 37,500 50,000 62,500 75,000 87,500 100,000

13
 Jenflo Series Pumps
Performance Curve
Size JF326 Speed 3500RPM Inlet 3" – Outlet 2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

86.6 200

5.709" IMPELLER DIAM

ETER
69.4 160

HE
5.315" AD
CA
PA
52.0 120 CIT
15HP Y
4.921"

10HP
34.7 80
4.528" 71/2 HP

17.3 40

0 0 20 (ft)

NPSH REQUIRED
10 NPSHr

0
GPM 0 50 100 150 200 250 300 350
LBS PER HOUR 0 25,000 50,000 75,000 100,000 125,000 150,000 175,0000

14
Jenflo Series Pumps
Performance Curve
Size JF118 Speed 3500RPM Inlet 11⁄2" – Outlet 11⁄2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

121.3 280

7.8
74"
IMP
ELL
104.0 240 ER
DIA
ME
TER
7.087"
HE
AD
86.6 200 CA
PA
CIT
6.299" 10HP Y

69.4 160
71/2HP
5.512"
5HP
52.0 120

34.7 80

17.3 40

0 30 (ft)

20
ED
REQUIR NPSHr
NPSH 10

GPM 0 40 80 120 160 200 240

LBS PER HOUR 0 20,000 40,000 60,000 80,000 100,000 120,000

15
 Jenflo Series Pumps
Performance Curve
Size JF328 Speed 3500RPM Inlet 3" – Outlet 2"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

138.8 320

7.874" IMPELL
E R DIAM
ETE R
121.3 280

7.480" HEA
DC
APA
CIT
104.0 240
7.087" Y
30HP

6.693" 25HP
86.6 200
20HP
6.299"

15HP
5.906"
69.4 160
10HP
5.512"

52.0 120

34.7 80

17.3 40

0 0 20 (ft)
D
QUIRE
NPSH RE
NPSHr

0 0 0
GPM 0 50 100 150 200 250 300 350 400
LBS PER HOUR 0 25,000 50,000 75,000 100,000 125,000 150,000 175,000 200,000

16
Jenflo Series Pumps
Performance Curve
Size JF438 Speed 3500RPM Inlet 4" – Outlet 3"
Performance curves are based on test with clear water at 68 degrees F. Permissible tolerance +-5%

HEAD IN
PSI FEET

156.1 360

7.992" IMP
138.8 320 ELL E R D IA
METE
R
7.480"
HE
121.3 280 AD
CA
PA
50HP CIT
7.087" Y
40HP
104.0 240

30HP
6.299" 25HP
20HP
86.6 200
15HP
10HP
69.4 160

5.512"

52.0 120

34.7 80

17.3 40

0 0 20 (ft)
ED
NPSH REQUIR NPSHr

0 0 0
GPM 0 100 200 300 400 500 600 700 800
LBS PER HOUR 0 50,000 100,000 150,000 200,000 250,000 300,000 350,000 400,000

17
 Jenflo Series Pumps Friction Loss Table
Loss of head due to friction in feet per foot of stainless steel tubing and
in feet for sanitary elbows/tees. Test liquid is water at 70 degrees F.

Capacity
In U.S. O.D. – 1'' O.D. – 1 1/2'' O.D. – 2'' O.D. – 2 1/2'' O.D. – 3'' O.D. – 4''
GPM I.D. – 0.902'' I.D. – 1.402'' I.D. – 1.870'' I.D. – 2.370'' I.D. – 2.870'' I.D. – 3.834''
Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee Tubing Elbow Tee
2 .01 .01 .1
4 .025 .02 .2
5 .035 .025 .25
10 .12 .06 .4 .02 .01 .15 .005 .015 .1
15 .25 .1 .8 .04 .02 .25 .013 .02 .15
20 .43 .22 1.5 .06 .03 .3 .02 .025 .2 .005 .02 .1 .003 .02 .06
25 .66 .4. 2.3 .08 .04 .4 .025 .03 .25 .006 .03 .15 .004 .03 .08
30 .93 .7 3.3 .105 .06 .55 .035 .05 .3 .008 .05 .2 .005 .04 .1
35 1.22 1.25 5.2 .135 .09 .8 .04 .06 .4 .011 .06 .25 .006 .05 .13
40 .17 .11 1.0 .05 .08 .5 .015 .07 .3 .007 .06 .15
45 .21 .16 1.3 .063 .1 .6 .02 .09 .35 .008 .065 .18
50 .25 .2 1.6 .073 .12 .7 .022 .1 .4 .01 .07 .2
60 .34 .35 2.2 .1 .18 .9 .03 .12 .45 .015 .08 .25
80 .57 .76 3.7 .16 .3 1.5 .05 .15 .55 .02 .1 .4
100 .85 1.35 5.8 .23 .44 2.3 .075 .18 .6 .03 .11 .5 .008 .04 .1
120 1.18 2.05 9.1 .32 .64 3.3 .105 .21 1.0 .04 .13 .6 .01 .05 .15
140 .42 .85 4.5 .14 .23 1.25 .05 .16 .8 .013 .06 .2
160 .54 1.13 5.8 .17 .28 1.6 .07 .2 1.1 .015 .07 .25
180 .67 1.45 7.4 .205 .31 2.0 .08 .21 1.3 .02 .08 .3
200 .81 1.8 9.0 .245 .35 2.5 .1 .26 1.6 .025 .09 .4
220 .95 2.22 11.0 .29 .41 3.0 .12 .3 1.9 .028 .1 .5
240 1.10 2.63 13.5 .34 .48 3.7 .14 .33 2.2 .035 .11 .55
260 .39 .53 4.5 .165 .39 2.5 .04 .115 .6
280 .45 .61 5.3 .19 .42 2.8 .045 .12 .65
300 .515 .7 6.2 .22 .5 3.1 .05 .13 .7
350 .68 1.05 8.5 .28 .67 4.1 .07 .15 .9
400 .86 1.55 11.0 .36 .88 5.2 .085 .18 1.2
450 1.05 2.25 13.5 .44 1.1 6.6 .105 .2 1.5
500 .54 1.4 8.0 .13 .23 1.75
550 .64 1.7 9.5 .15 .27 2.1
600 .75 2.05 10.2 .175 .3 2.5
650 .87 2.41 13.0 .2 .34 2.8
700 1.0 2.8 15.0 .23 .4 4.3
750 .26 .43 3.8
800 .3 .5 4.4
850 .33 .56 5.0
900 .37 .7 6.3
950 .41 .7 6.3
1000 .45 .8 7.0
1100 .53 1.06 8.6
18
NPSH, Friction Loss
and Tech Data Friction Loss Table Continue (Fractional)
O.D. Tube Size
Jenflo Series Pumps And NPSH... Capacity
Even though the Jenflo Series pumps have low in 1/2'' 3/4''
U.S.G.P.M. I.D. = .370'' I.D. = .620''
net positive suction head requirements, to
Tubing Elbow Tee Tubing Elbow Tee
ensure a long pump life and minimize pump
0.1 .0021 .002 .001
damage, make sure you have enough net 0.2 .0074 .083 .006 .002
positive suction head available. 0.3 .016 .015 .013 .001 .004 .005
Determining the net positive suction head 0.4 .027 .025 .024 .0019 .006 .008
required (NPSHr) for Jenflo Series pumps. 0.5 .041 .037 .037 .0029 .008 .011
The net positive suction head required (NPSHr) 0.6 .057 .052 .0052 .011 .013
0.7 .076 .068 .072 .0056 .014 .02
for each Jenflo model is shown at the bottom
0.8 .098 .087 .09 .007 .017 .025
of each curve. To decide if you have enough
0.9 .12 .107 .12 .009 .021 .032
net positive suction head available (NPSHa)
1.0 .145 .13 .15 .001 .025 .038
calculate as follows: 1.5 .34 .3 .32 .027 .05 .1
NPSHa = atmospheric pressure + elevation – 2.0 .53 .5 .58 .04 .07 .15
liquid vapor pressure – suction line pipe friction. 2.5 .82 .7 .9 .06 .08 .2
3.0 1.12 1.0 1.4 .085 .1 .25
4.0 2.0 1.6 2.5 .14 .2 .4
NOTES: Be sure to keep all units the same.
6.0 4.3 3.5 5.5 .32 .4 .8
Atmospheric pressure at sea level is 33.9 ft.
8.0 7.2 5.8 10.1 .53 .6 1.5
Elevation is the liquid level above the center line
10.0 8.4 15.7 .80 .9 2.2
of the pump inlet. The NPSHa must be equal to 12.0 11.3 22.5 1.15 1.2 3.0
or greater than the NPSHr as shown at bottom 14.0 14.7 1.5 1.5 3.8
of the pump curve. 16.0 18.3 2.0 1.85 4.7
18.0 2.45 2.25 5.8
20.0 2.9 2.7 7.0
25.0 4.5 3.95 10.7

Liquid Vapor Pressure of Water

Temp. Degrees F. 80 90 100 110 120 130 140 150 160 170 180 190 200 205 210 212
Absolute Vapor 1.17 1.62 2.20 2.97 3.95 5.20 6.78 8.75 11.19 14.19 17.85 22.28 27.60 30.65 33.96 35.38
Pressure Ft. Water
Conversion Factors and Formulas For Pump Sizing
Mass Pressure
1 gallon of water weighs 8.34 lbs. 1 ft. water is equal to 0.433 PSI equal to 0.8819 IN. Hg.
l cubic ft. of water weighs 62.4 lbs. I PSI is equal to 2.309 ft. water
1 pound is equal to 453.6 grams (0.4536 Kilograms) 1 atmosphere is equal to 14.7 PSI equal 33.9 ft. water
Volume Length
1 gallon is equal to 4 qts. equal to 0.1337 cubic ft. 1 inch is equal to 2.54 centimeters
1 cubic ft. is equal to 1728 cubic in. (7.48 gallons) 1 meter is equal to 3.281 ft.
1 liter is equal to 0.2642 gallons 1 millimeter is equal to 0.03937 inches.
1 imperial gallon is equal to 1.2 (US) gallons
Area and Velocity Area of a circle is equal to 3.14159 X diameter squared divided by 4.
180 GPM through 4” tube equals 5 ft./sec. velocity 43 GPM through 2” tube equals 5 ft./sec. velocity
101 GPM through 3” tube equals 5 ft./sec. velocity 25 GPM through 1.5” tube equals 5 ft./sec. velocity
69 GPM through 2.5” tube equals 5 ft./sec. velocity 10 GPM through 1” tube equals 5 ft./sec. velocity

19
 Product & Specific Temperature Viscosity
Jenflo Series Pumps Description Gravity. Degrees F. In CPS.

Fluid Viscosity Food, Dairy & Beverage:

Water 1 68 1
Animal Fat Melted 0.9 115 25
Approximate Fluid Viscosity And Barbecue Sauce 1.05 75 2,450
Specific Gravity For Various Liquids Batter 1 2200
Effective Viscosity may vary depending on Beer 1.02 32 2
Beverage Concentrate 1.26 55
Actual Product and Process.
Brewers Concentrated Yeast 1 40 1.1
Butter 0.95 55 3,200
Butter 0.95 90 82
Butter 0.95 115 45
Caramel 1.2 140 400
Caramel Coloring 1.38 68 700
Catsup 1.13 145 560
Chocolate 1.1 120 17,000
Condensed Milk 1.3 77 10,000
Corn Oil 0.92 30
Corn Syrup 41 1.39 60 15,000
Corn Syrup 45 1.45 130 12,000
Cottage Cheese 1.08 225
Cottage Cheese Dressing 1.02 900
Cream Cheese 160 3,100
Cream 40% Butter Fat 1.02 40 20
Egg Whole 0.5 50 60
Egg Yolk 1.12 35 4,500
Frosting 1 10,000
Gelatin 1.01 160 280 to 525
Ground Beef Fat 0.9 60 11,000
Honey 1.5 100 1,500
Ice Cream Mix 1.15 46 200
Liquid Sugar 60 Brix 1.29 60 75
Liquid Sugar 68 Brix 1.34 60 360
Liquid Sugar 76 Brix 1.39 60 4,000
Maple Syrup 1.37 68 400
Margarine 0.93 84 2,800
Mayonnaise 1 75 5,000
Milk 1.03 60 1.2
Mustard 1 85 3,600
Orange Juice Concentrate 1.1 38 5,000
Peanut Butter 1.2 125 17,000
Peanut Oil 0.92 100 42
Soybean Oil 0.95 100 36
Vegetable Oil 0.92 300 3
Whey-Condensed 60% Total Solids 1.24 45 2,000

! Swagelok does not recommend the use of the Jenflo

Series Centrifugal pump for liquids with a viscosity above
250 cP.

20
Jenflo Series Pumps
Parts List Key # Description Quantity
1 Clamp 1
Clearance between impeller and backplate 2 Casing 1
3 Impeller Nut 1
4 Impeller Nut Gasket (O-Ring) 1
5 Impeller 1
6 Casing Gasket (O-Ring) 1
7 Mechanical Seal 1
8 Sal Seat 1
9 Backplate 1
10 Stub Shaft 1
11 Set Screws (For Stub Shaft) 2
12 Deflector 1
13 Allen Bolts (For Adaptor) 4
Figure 1.1 14 Adapter Sub Assy (Pump End 1
15 Shaft Guard (Clear Plastic) 1
16 Adapter Sub Assy (Motor End) 1
17 Screw (Shaft Guard) 2
0.012" to 0.019"

JF114 only

Figure 1.2

21
 Jenflo Series Close-Coupled Pump Dimensions
Pump Dimensions (All dimensions are in inches)

Model Inlet Outlet X Y Z

JF114 1-1/2 1-1/2 3.62 1.57 2.17
JF118 1-1/2 1-1/2 5.39 2.28 4.21
JF216 2 1-1/2 5.15 2.04 2.91
JF326 3 2 5.7 2.40 2.95
JF328 3 2 5.31 3.03 4.09
JF438 4 3 7.24 2.2 3.74

Pump and Motor Dimensions

All dimensions are in inches (Note: Motor dimensions are for
reference only and may vary with manufacturer.)

Model Frame A B C D E F G H J
JF114 56C 8.62 4.53 20 6.57 9.32 3.00 2.44 3.50 6.50
143TC 10.44 6.43 17.07 6.57 11.07 4.00 2.75 3.50 7.00
145TC 10.44 6.43 17.07 6.57 11.07 5.00 2.75 3.50 7.00
JF118 143TC 10.44 6.43 17.07 7.00 11.50 4.00 2.75 3.50 7.00
145TC 10.44 6.43 17.07 7.00 11.50 5.00 2.75 3.50 7.00
182TC 9.73 5.21 20.94 7.00 10.50 4.50 3.75 4.50 8.63
184TC 11.91 7.18 20.00 7.00 12.50 5.50 3.75 4.50 9.00
213TC 12.24 7.46 25.90 7.75 12.25 5.50 4.25 5.25 9.50
215TC 12.24 7.46 25.90 7.75 11.5 5.50 4.25 5.25 9.50
254TC 13.22 8.44 26.53 9.09 13.84 8.25 5.00 6.25 11.25
JF216 56C 8.62 4.53 20.43 7.00 9.75 3.00 2.44 3.50 6.50
143TC 10.44 6.43 17.50 7.00 11.50 4.00 2.75 3.50 7.00
145TC 10.44 6.43 17.50 7.00 11.50 5.00 2.75 3.50 7.00
182TC 9.73 5.21 21.69 7.75 11.25 4.50 3.75 4.50 8.63
184TC 11.91 7.18 20.75 7.75 13.25 5.50 3.75 4.50 9.00
213TC 12.24 7.46 26.61 8.46 12.96 5.50 4.25 5.25 9.50
JF326 56C 8.62 4.53 21.15 7.72 10.47 3.00 2.44 3.50 6.50
143TC 10.44 6.43 18.22 7.72 12.22 4.00 2.75 3.50 7.00
145TC 10.44 6.43 18.22 7.72 12.22 5.00 2.75 3.50 7.00
182TC 9.73 5.21 22.40 8.46 11.96 4.50 3.75 4.50 8.63
184TC 11.91 7.18 21.46 8.46 13.96 5.50 3.75 4.50 9.00
213TC 12.24 7.46 27.32 9.17 13.67 5.50 4.25 5.25 9.50
215TC 12.24 7.46 27.32 9.17 13.42 5.50 4.25 5.25 9.50
254TC 13.22 8.44 27.24 9.80 14.55 8.25 5.00 6.25 11.25
JF328 145TC 10.44 6.43 19.41 7.91 12.41 5.00 2.75 3.50 7.00
182TC 9.73 5.21 22.60 8.66 12.16 4.50 3.75 4.50 8.63
184TC 11.91 7.18 21.66 8.66 14.16 5.50 3.75 4.50 9.00
213TC 12.24 7.46 27.52 9.37 13.87 5.50 4.25 5.25 9.50
215TC 12.24 7.46 27.52 9.37 13.62 5.50 4.25 5.25 9.50
254TC 13.22 8.44 27.44 10.00 14.75 8.25 5.00 6.25 11.25
256TC 14.74 8.99 29.75 10.00 14.75 10.00 5.00 6.25 11.25
284TC 20.77 13.12 33.39 10.00 15.00 9.50 5.50 7.00 12.75
286TC 20.51 13.12 33.39 10.00 15.00 11.00 5.50 7.00 12.75
324TSC 23.06 14.62 34.00 10.50 19.50 10.50 6.50 8.00 16.00
JF438 182TC 9.73 5.21 19.87 7.87 13.37 4.50 3.75 4.50 8.63
184TC 11.91 7.18 20.87 7.87 13.37 5.50 3.75 4.50 9.00
213TC 12.24 7.46 26.73 8.58 13.08 5.50 4.25 5.25 9.50
215TC 12.24 7.46 26.73 8.58 12.83 5.50 4.25 5.25 9.50
254TC 13.22 8.44 26.65 9.21 13.96 8.25 5.00 6.25 11.25
256TC 14.74 8.99 28.96 9.21 13.96 10.00 5.00 6.25 11.25
284TC 20.77 13.12 32.60 9.21 14.21 9.5 5.50 7.00 12.75
286TC 20.51 13.12 32.60 9.21 14.21 11.00 5.50 7.00 12.75
324TSC 23.06 14.62 33.19 9.69 18.69 10.50 6.25 8.00 16.00
22 326TSC 23.06 14.62 34.69 9.69 18.69 12.00 6.25 8.00 16.00
Jenflo Series Centrifugal
Pump Ordering
Information
Example: Options, Features and Benefits:

Casing drains are available.

JF-326-M-DG
Electro-polishing is standard in the Jenflo Series
Pump Line (32 µin. Ra maximum).
JF = Jenflo, Close-Coupled
Our clamped casing allows for quick dismantling
without tools.
326 The outlet location can be adjusted easily by rotating
3 = 3” Inlet size (enlarged ports are available) over the 360 degree range.
2 = 2” Outlet Size
6 = 6” maximum (nominal) impeller diameter. Our 316 SS open impeller is investment casted and
electro-polished (standard).
M = Clamp port connection (standard)
Port adapters are available upon
request as specials.
T = Bevel seat tread
S = NPT female tread
F = Flange
W = Tri-weld
Safe Product Selection
DG = Internal mounted single mechanical seal.
Carbon v.s. silicon carbide with When selecting a product, the total system design must
be considered to ensure safe, trouble-free performance.
EPDM Elastomers (standard).
Function, material compatibility, adequate ratings,
Carbon v.s. silicon carbide with proper installation, operation, and maintenance are the
Viton Elastomers. responsibilities of the system designer and user.
Silicon carbide v.s. silicon carbide with
EPDM Elastomers
Silicon carbide v.s. silicon carbide with
Viton Elastomers

Specify elastomer, impeller diameter, seal material, For more information contact us at Jensen …
and motor (size & RPM) upon ordering
Jensen Fittings Corporation
107-111 Goundry Street
North Tonawanda, NY 14120
Toll-free in U.S. 800-255-4111
Fax: 800-523-4165
e-mail: [email protected]
www.jensenfittings.com

23
Swagelok—TM Swagelok Company
Jenflo—TM Jensen
© 2002 Swagelok Company
Printed in U.S.A., GLL
August 2002, R0
PUMPCAT