PRODUCT DATA SHEET
Sikadur®-300
EPOXY IMPREGNATING RESIN FOR SIKAWRAP® STRUCTURAL STRENGTHENING FABRICS
DESCRIPTION SUSTAINABILITY
Sikadur®-300 is a 2-part, epoxy-based impregnating / ▪ Conforms with LEED v4 MR credit: Building product
laminating resin for SikaWrap® structural strengthen- disclosure and optimization — Environmental
ing fabrics. Product Declarations (option 1)
Suitable to use in hot and tropical climatic conditions. ▪ Conforms with LEED v4 MR credit: Building product
disclosure and optimization — Material ingredients
USES (option 2)
▪ Environmental Product Declaration (EPD) in accord-
Sikadur®-300 may only be used by experienced profes- ance with EN 15804. EPD independently verified by
sionals. Institute für Bauen und Umwelt e.V. (IBU)
▪ As an impregnating / laminating resin for the APPROVALS / CERTIFICATES
SikaWrap® fabric reinforcement wet application
method ▪ Czech Republic: Technical Approval, ITC, Nr. STO-AO
▪ As a substrate primer for the wet application method 224-1012/2020
▪ Technical Approval, CSTB, Avis Technique 3.3/19-
CHARACTERISTICS / ADVANTAGES 1005_V1
▪ Certificate of Technical Valuation, CSLLPP, No.
▪ Easy to mix 209/2019
▪ National Technical Assessment Sika CarboDur® kit,
▪ Application by impregnation roller ITB, No. ITB-KOT-2019/0415 v.1
▪ Formulated for manual or mechanical saturation ▪ National Technical Assessment Sika CarboDur® kit,
methods ITB, Approval No. ITB-KOT-2018/0414 v.2
▪ Good adhesion to many substrates ▪ Technical Approval Sika CarboDur, Nr. IBDiM-KOT-
▪ High mechanical properties 2019-0361 v.2
▪ Extra-long pot life ▪ Technical Agreement, CTPC, No. 016-011401-2019
▪ Slovakia: Technical Assessment, TSUS, No. SK04-ZSV-
2669
▪ Technical Approval, DIT, No. N604R/19
▪ Test Report, Ministry of Regional Development
(Ukraine), No. ЗНТ–219–2167.13-001
Product Data Sheet
Sikadur®-300
March 2022, Version 04.01
020206040010000006
1/4
PRODUCT INFORMATION
Product declaration EN 1504-4: Structural bonding
Composition Epoxy resin
Packaging Please refer to local country price list for available packaging sizes:
Part A 14.88 kg pre-batched 22.305 kg pre-batched
unit unit
Part B 5.12 kg pre-batched 7.695 kg pre-batched
unit unit
Part A+B 20 kg 30 kg
Shelf life 24 months from date of production
Storage conditions The product must be stored in original, unopened and undamaged pack-
aging in dry conditions at temperatures between +5 °C and +30 °C.
Always refer to packaging.
Colour Part A amber / liquid
Part B pale yellow / liquid
Parts A + B mixed light-yellow / liquid
Density Mixed resin ~1.16 kg/l
Value at +23 °C.
Viscosity Shear rate: 50 /s
Temperature Viscosity
+15 °C ~2000 mPa·s
+23 °C ~700 mPa·s
+40 °C ~200 mPa·s
TECHNICAL INFORMATION
Modulus of elasticity in flexure ~2800 N/mm2 (7 days at +23 °C) (DIN EN 1465)
Tensile strength ~45 N/mm2 (7 days at +23 °C) (EN ISO 527-2)
Modulus of elasticity in tension ~3500 N/mm2 (7 days at +23 °C) (EN ISO 527-2)
Tensile strain at break 1.5 % (7 days at +23 °C) (EN ISO 527-2)
Tensile adhesion strength Concrete fracture (> 4 N/mm2) on sandblasted substrate (EN ISO 4624)
Coefficient of thermal expansion ~6.0 × 10−5 (± 0.2 × 10–5) 1/K (EN 1770)
(linear expansion between -20 °C and +40 °C)
Service temperature Maximum +45 °C
Minimum –40 °C
Glass transition temperature Curing time Curing temperat- TG (EN 12614)
ure
30 days +30 °C +53 °C
Heat deflection temperature Curing time Curing temperat- HDT (ASTM D648)
ure
7 days +15 °C +43 °C
7 days +23 °C +49 °C
3 days +40 °C +60 °C
7 days +40 °C +66 °C
Resistant to continuous exposure +45 °C.
Product Data Sheet
Sikadur®-300
March 2022, Version 04.01
020206040010000006
2/4
SYSTEM INFORMATION
System structure ▪ Substrate primer: Sikadur®-300 / Sikadur®-330
▪ Impregnating / laminating resin: Sikadur®-300
▪ Structural strengthening fabric: SikaWrap® type to suit requirements
APPLICATION INFORMATION
Mixing ratio Part A : Part B = 100 : 34,5 by weight
Consumption Guide: ~0.6 – 1.0 kg/m2
Also refer to:
▪ "Method Statement for SikaWrap® manual wet application"
▪ "Method Statement for SikaWrap® saturator machine wet application"
Material temperature Maximum +40 °C
Minimum +15 °C
Ambient air temperature Maximum +40 °C
Minimum +15 °C
Dew point Beware of condensation.
The substrate and uncured applied resin must be at least +3 °C above dew
point to reduce the risk of condensation or blooming on the resin surface.
Substrate temperature Maximum +40 °C
Minimum +15 °C
Substrate moisture content ≤ 4 % parts by weight
The following test methods can be used: Sika®-Tramex meter, CM-meas-
urement or Oven-dry-method. No rising moisture according to ASTM (Poly-
ethylene-sheet).
Pot Life Temperature Pot life Open time (ISO 9514)
+15 °C ~3 hours ~6 hours
+23 °C - ~4 hours
+40 °C ~60 minutes ~90 minutes
The pot life begins when Parts A+B are mixed. It is shorter at high temper-
atures and longer at low temperatures. The greater the quantity mixed,
the shorter the pot life. To obtain longer workability at high temperatures,
the mixed adhesive may be divided into smaller quantities. Another meth-
od is to chill Parts A+B before mixing (not below +5 °C).
BASIS OF PRODUCT DATA IMPORTANT CONSIDERATIONS
All technical data stated in this Data Sheet are based ▪ Sikadur® resins are formulated to have low creep un-
on laboratory tests. Actual measured data may vary der permanent loading. However, due to the creep
due to circumstances beyond our control. behavior of all polymer materials under load, the
long-term structural design load must account for
FURTHER INFORMATION creep. Generally, the long term structural design
load must be lower than 20−25 % of the failure load.
Reference must be made to the Sika® Method State- A structural engineer must be consulted for load cal-
ments: culations for the specific application.
▪ Method Statement: SikaWrap® manual wet applica- ▪ Protect from rain for at least 24 hours after applica-
tion - Ref 850 41 03 tion. Ensure placement of fabric and laminating with
▪ Method Statement: SikaWrap® saturator machine roller takes place within open time.
wet application - Ref 850 41 04 ▪ For application in cold or hot conditions, pre-condi-
tion material for 24 hours in temperature-controlled
storage facilities to improve mixing, application and
pot life limits.
Product Data Sheet
Sikadur®-300
March 2022, Version 04.01
020206040010000006
3/4
ECOLOGY, HEALTH AND SAFETY ▪ Add both parts in the correct proportion into a suit-
able clean, dry container and mix parts A+B continu-
User must read the most recent corresponding Safety ously for at least 3 minutes until a uniformly col-
Data Sheets (SDS) before using any products. The SDS oured smooth consistency mix has been achieved.
provides information and advice on the safe handling, ▪ To ensure thorough mixing pour materials into
storage and disposal of chemical products and con- a clean container and mix again for approximately
tains physical, ecological, toxicological and other 1 minute. Over mixing must be avoided to minimise
safety-related data. air entrainment. Mixing time for A+B = 4.0 minutes.
APPLICATION
APPLICATION INSTRUCTIONS
Reference must be made to the Sika® Method State-
SUBSTRATE QUALITY ments:
▪ Method Statement: SikaWrap® manual wet applica-
Substrates must be structurally sound and of sufficient tion - Ref 850 41 03
tensile strength to provide a minimum tensile strength ▪ Method Statement: SikaWrap® saturator
of 1.0 N/mm2 or as required in the design specifica- machine wet application - Ref 850 41 04
tion.
Reference must be made to the Sika® Method State- CLEANING OF EQUIPMENT
ments:
Clean all tools and application equipment immedi-
▪ Method Statement: SikaWrap® manual wet applica-
ately after use with Sika® Colma Cleaner. Hardened
tion - Ref 850 41 03
▪ Method Statement: SikaWrap® saturator machine material can only be removed mechanically.
wet application - Ref 850 41 04
LOCAL RESTRICTIONS
SUBSTRATE PREPARATION
Note that as a result of specific local regulations the
Reference must be made to the Sika® Method State- declared data and recommended uses for this product
ments: may vary from country to country. Consult the local
▪ Method Statement: SikaWrap® manual wet applica- Product Data Sheet for exact product data and uses.
tion - Ref 850 41 03
▪ Method Statement: SikaWrap® saturator machine LEGAL NOTES
wet application - Ref 850 41 04
MIXING The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
PRE-BATCHED UNIT products, are given in good faith based on Sika's cur-
▪ Mix only the quantity which can be used within rent knowledge and experience of the products when
its pot life properly stored, handled and applied under normal
▪ Prior to mixing all parts, mix part A (resin) briefly us- conditions in accordance with Sika's recommenda-
ing a mixing spindle attached to a slow speed elec- tions. In practice, the differences in materials, sub-
tric mixer (max. 300 rpm). strates and actual site conditions are such that no war-
▪ Add part B (hardener) to part A and mix parts ranty in respect of merchantability or of fitness for a
A+B continuously for at least 3 minutes until a uni- particular purpose, nor any liability arising out of any
formly coloured smooth consistency mix has been legal relationship whatsoever, can be inferred either
achieved. from this information, or from any written recom-
▪ To ensure thorough mixing pour materials into mendations, or from any other advice offered. The
a clean container and mix again for approximately user of the product must test the product’s suitability
1 minute. Over mixing must be avoided to minimise for the intended application and purpose. Sika re-
air entrainment. Mix full units only. Mixing time for serves the right to change the properties of its
A+B = 4.0 minutes. products. The proprietary rights of third parties must
BULK CONTAINER be observed. All orders are accepted subject to our
▪ Mix only the quantity which can be used within current terms of sale and delivery. Users must always
its pot life. refer to the most recent issue of the local Product
▪ Prior to mixing all parts, mix part A (resin) briefly us- Data Sheet for the product concerned, copies of which
ing a mixing spindle attached to a slow speed elec- will be supplied on request.
tric mixer (max. 300 rpm).
SIKA NORTHERN GULF SIKA SOUTHERN GULF Sika Saudi Arabia
Bahrain / Kuwait UAE / Oman / SIC Riyadh / Jeddah / Dammam
Tel: +973 177 38188 Tel: +971 4 439 8200 Tel. +966 11 217 6532
info@[Link] info@[Link] info@[Link]
[Link] [Link] [Link]
Sikadur-300-en-AE-(03-2022)-[Link]
Product Data Sheet
Sikadur®-300
March 2022, Version 04.01
020206040010000006
4/4
