VIAL UNIVERSTFY OF HARYANA Find Semester Examinations April 2022 Programme: M Teeh (Civil) Stuctural Engineering Session: 2021-22 Semester: First Max. Time: 3 Hours Course Title: Advanced reinforced Concrete Design Max. Marks: 70 Course Code: ATCE 102 Instruction 1. Question no, 1 has seven parts and students need to. anal half Marks, answer any four. Each part carries three “esto fo. 2 (0 3 have three parts and student need to answer any two parts of each question, Each patt earties seven marks, Qi » hy (4X3.5=14) plain the difference between long column and short column What are additional secondary moments in slender columns? How do we include them in the design of braced and unbraced slender columns? Q Write down the codal provision for providing reinforcement in a deep beam. 4) Explain the yield line theory of slabs, What are the propertics of yield lines? ©) What are the methods available for yield line analysis of slabs: 1) What do you understand hy the term limit state of S “short term” and “long term” deflection of bean £) Explain the difference between bunker and silos using diagram, ility? Explain the terms Q2. (2X7=14) 4) Design the reinforcement to he provided for short column 400 mm * $00 mm ° subjected to following forces. Use M25 concrete and Fe 415 stecl, Pu =1600kN Mux =200 Nm Muy =150 kNm b) Determine the reinforcement required for a column with the given data and is restrained against sway. Size of the column = 500 mm x 400 mm Conerete Grade =M30 fy =415 Nimm2 lex -7.0m ley =6.0m Unsupported length -7.0m Factored load (Pu) = 1600 kN Factored moment is 40 kNm at the top, 25 kNm at bottom in the direction of larger dimension, Factored moment iy 30 KNu al the top, 20 KNun at bottom in the nection of shorter dimension. The column is bend in double curvature with reinforcement equally distributed on all the four sides, 7 ©), Classify various types of reinforced concrete shear walls, Explain in briet with diay i) Coupled Sheur wall. ii) Rigid Frames Shear walls Qs. OXT=14) a) Design a simply supported deep hear to the 1 reqmiremnents, Use M20 Conerete and Fe 415 steel. Clear span = 4.20 m Scanned with CamScannerb) c) Bearing at each end = 450 mm Overall depth =3500 mm Width of beam =250mm Superimposed load = = 225 KN/m A simple supported deep beam is 350 mm wide, 4200 mm deep, has a clear span of 6 metre. The beam carries a superimposed load of 300 kN/m. The beam has a bearing of 450 mm at each end, Design the beam with M20 conerete and Fe415 steel. What do you mean by the concept of Strut-Tie model? Elaborate its application in design of deep beams with diagram. (2X7=14) Prove that the ultimate load carrying capacity of a circular slab of radius r is 6mu/t® Determine the permissible service load for a simply supported square slab of size 4 m x 4m. Itis reinforced with 10 mm diameter bars @ 200 mm ¢/c in both directions. The total depth of slab is 150 mm. Design a simply supported square slab of 4m to support a service load of 4kN/m?, Use M20 concrete and Fe 415 Steel. (2X7=14) 1g W. Airy’s Theory. Derive the equation of lateral force acting on a shallow Bins u: A concrete bin is 3.5 m x 3.5 m and contains wheat weighing 8500 N/m3. The Coefficient of friction between grain and grain is 0.45. The Coefficient of friction between grain and concrete is 0.42. Ifthe depth of wheat is 2.75 m, determine the lateral pressure per meter run of the bin wall. ‘A rectangular beam 300 mm x 500 mm_is reinforced with 4-bars of 16 mm diameter at an effective depth of 470 mm. Two hanger bars of 12mm are provided on the compression face. If the beam is subjected to a service load of 15 kN/m, over a span of Sm then compute the short term and long term deflection of the beam. Use M20 concrete and Fe 415 steel. ‘A simple supported beam 500 mm x 700 mm subjected to a moment of 300 KNm, having a span of 6 m is reinforced with 5-25 mm diameter bar on the tension side, calculate the design surface crack width at the bottom of the tension face, if M20 concrete and Fe 415 Steel is used. Scanned with CamScannerDepartment of Civil Engineer [Link] (Structural Ea 2) Semester Advanced Reinforced Conerete Deisgn (MTC 102) Attempt any two questions Max. Marks: 20 First Sessional Time: thr. 1. A simpte supported deep beam is 150 mm wide. 4200 mm deep, has a cletr sta of 6 metre The beam carries & superimposed oad 00 Nim, The beam has a bearing of 450 mm at each end, Design the beam sith M20 concrete and Led eel av) Q2, Design the reinforcement to be provided for short column 400 mm 500 mm subjected 0 fotlowil Pu 1600 kN Muy 0 kN Muy 150 kN Use M25 conerete and Pe 415 steet 0) Q3, Determine the reinforcement required fora column with the given data and is restrained against sway Size ofthe column = 500 mm * 400 mm Concrete Grade M30 § HIS Nimm2 ‘ lex 70m ley oom Unsuppprted tength 7.0m Factored load (Pu) ~ 1600 KN toned moment is 40 Nm atthe top. 25 kNm at bottom in he direction of larger dimension. reigned moment is 30 kNm atthe top. 20 km at bottom in the direction of shorter dimension. Hh wolumn is bend in double earvature with reinforcement ‘equally distributed on all the four «ny Scanned with CamScanner