General-Purpose DAQ
PCI-9112
16-CH 12-Bit 110 kS/s Multi-Function DAQ Card
Specifications Terminal Boards & Cables
For PCI-9112:
Analog Input
■ Number of channels: 16 single-ended or 8 differential ■ DIN-37D-01
■ Resolution: 12 Bit Terminal Board with One 37-pin D-sub
■ Conversion time: 8 μs Connector and DIN-Rail Mounting
■ Maximum sampling rate: 110 kS/s ■ DIN-20P-01
■ Input signal ranges Terminal Board with One 20-pin Ribbon
Gain Input Range Connector and DIN-Rail Mounting
Bipolar Unipolar
■ ACLD-9137-01
PCI-9112 0.5 ±10 V -
General-Purpose Terminal Board with One
1 ±5 V 0 to 10 V
37-pin D-sub Male Connector
2 ±2.5 V 0 to 5 V
4 ±1.25 V 0 to 2.5 V ■ ACLD-9138-01
8 ±0.625 V 0 to 1.25 V General-Purpose Terminal Board with One
Features ■ Accuracy
37-pin D-sub Connector
■ Supports a 3.3 V or 5 V PCI bus (PCI-9112) ■ ACLD-9182A-01
Gain Accuracy
■ 12-Bit A/D resolution Terminal Board with 16-CH Isolated Digital Inputs
0.5, 1 0.01% of FSR ± 1 LSB
■ Up to 110 kS/s sampling rate ■ ACLD-9185-01
2, 4 0.02% of FSR ± 1 LSB
■ 16-CH single-ended or 8-CH differential inputs Terminal Board with 16-CH Isolated Digital Inputs
8 0.04% of FSR ± 1 LSB
■ Bipolar or unipolar analog input ranges
■ ACL-10137-1MM
■ Programmable gains of x0.5, x1, x2, x4, x8 ■ Input coupling: DC
37-pin D-sub male/male cable, 1 M
■ Automatic analog inputs scanning
■ Overvoltage protection: continuous ±35 V
■ Input impedance: 1 GΩ ■ ACL-10137-1MF
■ Bus-mastering DMA for analog inputs
■ Trigger modes: software 37-pin D-sub male/female cable, 1 M
■ 2-CH 12-Bit multiplying analog outputs ■ Data transfers:
■ ACL-10120-1
■ 16-CH TTL digital inputs and 16-CH TTL digital outputs programmed I/O, interrupt, bus-mastering DMA 20-pin flat cable, 1 M
■ 1-CH 16-Bit general-purpose timer/counter
Analog Output ■ ACL-10237-1
■ Supported Operating System ■ Number of channels: 2 voltage outputs 37-pin D-sub male/male flat cable, 1 M
• Windows 7/8 x64/x86, Linux ■ Resolution: 12 Bit * For more information on mating cables, please refer to
■ Output ranges (software programmable) P3-48/49.
■ Driver and SDK
Output Range
• LabVIEW, MATLAB, C/C++, Visual Basic,
Unipolar 0 to 10 V, 0 to 5 V, 0 to EXTREF
Visual [Link] ■ Output driving capacity: ±5 mA max Ordering Information
■ Software Utility ■ Settling time: 30 μs to 0.5 LSB ■ PCI-9112
■ Data transfers: programmed I/O 16-CH 12-Bit 110 kS/s Multi-Function DAQ Card
• AD-Logger
(AO Calibrated on 5V)
Digital I/O
■ PCI-9112A
■ Number of channels: 16 inputs and 16 outputs
16-CH 12-Bit 110kS/s Multi Function DAQ Card
■ Compatibility: 5 V/TTL
(AO Calibrated on 10V)
■ Data transfers: programmed I/O
General-Purpose Timer/Counter
■ Number of channels: 1
■ Resolution: 16 Bit
■ Compatibility: 5 V/TTL
■ Base clock available: 2 MHz, external clock to 10 MHz
Calibration
■ PCI-9112 : Calibrate Analog Output on 5V
■ PCI-9112A : Calibrate Analog Output on 10V
General Specifications
■ I/O connector: 37-pin D-sub female
■ Operating temperature: 0˚C to 60˚C (32˚F to 140˚F)
■ Storage temperature: -20˚C to 80˚C (-4˚F to 176˚F)
■ Relative humidity: 5% to 95%, non-condensing
■ Power requirements
+5 V +12 V
PCI-9112A 460 mA typical 110 mA typical
■ Dimensions (not including connectors)
• 175 mm x 107 mm (6.82" x 4.17")
Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specifications are subject to change without further notice. [Link] 3-28
