Scribd
Upload
245 views3 pages

S355JR Steel Grade Data Sheet

S355JR is a structural steel grade used for a variety of applications. It has a specified minimum impact strength of 27 J at various temperatures. The chemical composition of S355JR steel includes a maximum of 0.24% carbon and 1.60% manganese. The mechanical properties include a minimum yield strength of 335 MPa for flat bars between 40-63 mm, and an elongation at fracture of at least 21%. Typical physical properties include a density of 7800 kg/m3, thermal conductivity of 40-45 W/mK, and electrical resistivity of 0.20-0.25 μΩm.

Uploaded by

aabco.purchase
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
245 views3 pages

S355JR Steel Grade Data Sheet

S355JR is a structural steel grade used for a variety of applications. It has a specified minimum impact strength of 27 J at various temperatures. The chemical composition of S355JR steel includes a maximum of 0.24% carbon and 1.60% manganese. The mechanical properties include a minimum yield strength of 335 MPa for flat bars between 40-63 mm, and an elongation at fracture of at least 21%. Typical physical properties include a density of 7800 kg/m3, thermal conductivity of 40-45 W/mK, and electrical resistivity of 0.20-0.25 μΩm.

Uploaded by

aabco.purchase
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

Last revised: Tue, 04 Oct 2022 11:40:38 GMT

Material data sheet


Steel grade

All
S355JR
General Information

S355 is a structural micro-alloyed grade used for a great variety of applications. It is standardized with a specified
impact strength of 27 J at a few different temperatures, but EN10027 gives guidelines how to extend the
designation.

Similar designations
S355K2 - 15Mn4, S355JR - C16, S355J2 - C16

Chemical composition
Variant Cast Weldability C% Si % Mn % P% S% Cu % N%
CEV 0.52max Min - - - - - - -
S355JR / 2132 CC
Pcm 0.35max Max 0.24 0.55 1.60 0.040 0.040 0.40 0.0120
CEV 0.52max Min - - - - - - -
S355JR EN10025-2:2019 Std
Pcm 0.35max Max 0.24 0.55 1.60 0.035 0.035 0.55 -
Mechanical Properties
 Dimension Yield strength min Tensile strength Elongation A5 Impact (ISO-V)
Variant Format Hardness
Condition [mm] [MPa] [MPa] [%] strengthmin

Flat
< 16 355** 470-630 22 140-190 HB 20 °C 27 J (long)
bar
Flat
16 < 40 345** 470-630 22 140-190 HB 20 °C 27 J (long)
bar
S355JR / Flat
+AR 40 < 63 335** 470-630 21 140-190 HB 20 °C 27 J (long)
2132 bar
Flat
63 < 80 325** 470-630 20 140-190 HB 20 °C 27 J (long)
bar
Flat
80 < 100 315** 470-630 20 140-190 HB 20 °C 27 J (long)
bar
Rp0.2 * Reh, ** Re l

Transformation temperatures
Temperature °C
MS 540
AC1 720
AC3 790
Other properties (typical values)
Youngs module (GPa) Poisson´s ratio (-) Shear module (GPa) Density (kg/m3)
210 0.3 80 7800
Average CTE 20-300°C Specific heat Thermal conductivity Ambient Electrical resistivityAmbient
(µm/m°K) capacity 50/100°C (J/kg°K) temperature (W/m°K) temperature (µΩm)
12 460 - 480 40 - 45 0.20 - 0.25

Contact us
Would you like to know more about our offers? Don´t hesitate to contact us:

Via e-mail: [email protected]

Via telephone: +46 8 622 1300

For more detailed information please visit http://www.ovako.com/en/Contact-Ovako/

Disclaimer
The information in this document is for illustrative purposes only. The data and examples are only general recommendations and not a
warranty or a guarantee. The suitability of a product for a specific application can be confirmed only by Ovako once given the actual
conditions.The purchaser of an Ovako product has the responsibility to ascertain and control the applicability of the products before
using them. Continuous development may necessitate changes in technical data without notice. This document is only valid for Ovako
material. Other material, covering the same international specifications, does not necessarily comply with the properties presented in
this document.

You might also like