Scribd
Upload
44 views1 page

Automation en - WW Selection - Guide 01

This document provides a welding equipment selection guide for beams, cylinders, and other objects. It lists the weld object size, production position, weld process, wire setup, and recommended equipment for various thickness, length, height, and diameter ranges. The guide separates selections for beams, circular objects with ID welding where rotation is possible, circular objects with OD welding where rotation is possible, and circular objects where rotation is not possible such as tanks. Recommendations include single, twin, tandem, and multi-wire equipment suited for low, medium, and high production volumes.

Uploaded by

baldinig86
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
44 views1 page

Automation en - WW Selection - Guide 01

This document provides a welding equipment selection guide for beams, cylinders, and other objects. It lists the weld object size, production position, weld process, wire setup, and recommended equipment for various thickness, length, height, and diameter ranges. The guide separates selections for beams, circular objects with ID welding where rotation is possible, circular objects with OD welding where rotation is possible, and circular objects where rotation is not possible such as tanks. Recommendations include single, twin, tandem, and multi-wire equipment suited for low, medium, and high production volumes.

Uploaded by

baldinig86
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd

WELDING EQUIPMENT SELECTION GUIDE

For Beams and Cylinders


Weld Object Size
Production Position Weld
Application Min Process Wire set-up Equipment
Thickness Length Height volume heads
diameter
<10 mm <10 m N/A N/A Low PA, PB GMAW One Single Miggytrac
<10 mm <10 m N/A N/A Low All GMAW One Single Railtrac
<15 mm <15 m N/A N/A Low PB SAW/GMAW One Single, Twin A2 Multitrac
<15 mm <15 m N/A N/A Low PA, PB SAW/GMAW One Single, Twin Versotrac
Single, Twin,
<20 mm <25 m N/A N/A Low PB SAW One A6 Mastertrac
Beam Tandem, ICE
I, T, H, Box <20 mm <25 m <800 mm N/A Medium PB SAW Two Single, Twin A6 DK
<15 mm <20 m <800 mm N/A Medium PA, PB SAW/GMAW Two Single, Twin Mechtrac
Single, Twin, Column and
<35 mm <24 m <2500 mm N/A Medium PB SAW Two
Tandem, ICE Boom (BS 3 or 4)
Single, Twin, Pull-through (e.g.
<50 mm <24 m <3200 mm N/A High PB SAW Two
Tandem, ICE IT-258 or IT-3200)

Circular <10 mm N/A N/A >1150 mm Low PA, PB SAW/GMAW One Single, Twin A2 Multitrac
objects ID <10 mm N/A N/A >1100 mm Low PA, PB SAW/GMAW One Single, Twin Versotrac
welding
Single, Twin,
Possible to <20 mm N/A N/A >1650 mm Medium PA, PB SAW One A6 Mastertrac
Tandem, ICE
rotate
PV, Tanks, Single, Twin,
Column and
WT, <400 mm N/A N/A >500 mm High PA, PB SAW One Tandem, ICE,
Boom (BS 1)
Monopiles Multi, NG

Circular
objects OD
welding
Single, Twin,
Possible to Column and
<400 mm N/A N/A <12 m High PA, PB SAW One Tandem, ICE,
rotate Boom (BS 1)
Multi, NG
PV, Tanks,

XA00224320 / GL / EN / 12-08-20
WT,
Monopiles

Circular
<20 mm N/A N/A >203 mm Medium All GMAW One Single Orbiter
objects ID/
OD welding
<10 mm N/A N/A >508 mm Low All GMAW One Single Railtrac
Not possible
to rotate <35 mm N/A N/A >4 m High PC SAW/GMAW Two Single, Twin Circotech
Tanks

You might also like