Advanced Clinical Defibrillator

DefiMax plus

A professional clinical defibrillator with advanced patient monitoring

feature.

The defibrillator enables monitoring of ECG from 3 and 5 leads ECG

cable, arterial pressure measured by non-invasive (NIBP) and
invasive (IBP) methods, saturation (SpO2), temperature and end tidal
carbon dioxide (CO2).

The advanced technology used in the defibrillator delivers an energy

impulse (from 1 to 300J) which is precisely adjusted to patient’s
physical parameters and minimizes an injury of the heart muscle.
European quality,
worldwide recognition The defibrillator can work in a manual and automatic mode (AED).
20 years of experience, thousands of patient It can be used for performing cardioversion and pacer in asynchronous
monitors and defibrillators sold in Europe, Asia,
Emtel worldwide
Australia, Africa and South America. or synchronous mode.
Technical parameters DefiMax Plus 0044

GENERAL PARAMETERS PACER MODULE (option)

Power supply 100 - 240 VAC 50/60 Hz Impulse shape monophasic

Internal battery 12 VDC Mode on demand and fixed-rate
Safety class I, CF, BF Output current 0 to 200 mA
Safety requirements MDD: 93/42/EEC, 2007/47/EC; Pacing rate 30 to 180 1/min
EN 60601-1, EN 60601-1-2, EN 60601-2-4 Impulse width 5 to 40 ms
Weight 6.0 kg without paddles
Dimensions 298 x 312 x 260 mm SpO2 MODULE Nellcor OxiMax™ (option)

MODES Measurement range 0 - 100%

Accuracy 70% - 100% 2 digits
Manual mode Accuracy 60% - 80% 3 digits
Cardioversion mode Pulse rate 20 - 300 bpm
AED mode Acoustic signaling of saturation
Monitoring mode Motion and low perfusion tolerant
Pacer mode Plethysmographic wave displayed
Service mode
NIBP MODULE
DISPLAY
Measurement range of transducer 10 - 300 mm Hg
Display type 6.5” LCD TFT colour Measurement mode manual, auto or STAT
Resolution 640 x 480 pixels Auto-mode repetition time 1 - 480 min
Digital values and waves displayed

SIGNAL OUTPUT (option)

MONITOR MODULE
ECG signal output 1 Vpp
Number of channels 4
Sweep speed 3.125 to 50 mm/s
Trends 6h THERMAL RECORDER
Archive 6h
Events archive 500 Paper width 57 mm
Alarms for all parameters Mode auto and manual
Number of channels 2
DEFIBRILLATOR MODULE Sweep speed 25 and 50 mm/s
Printout length 15 s
Manual and cardioversion mode
Electrodes type disposable and reusable
adult and pediatric TEMPERATURE MODULE (option)
Impulse type biphasic with patient’s
impedance compensation Measurement range 0 - 50.0 °C
Energy range 1 to 300 J Resolution 0.1°C
Charging time < 10 s for 300 J
CO2 MODULE (option)
AED mode
Electrodes type disposable Measurement range 0 - 150 mm Hg
Impulse type biphasic with patient’s Respiration rate 0 - 150 rpm
impedance compensation Apnea recognition time 5 - 60 s
Advanced help system CO2 waveform displayed
during defibrillation
IBP MODULE (option)
ECG MODULE
Measurement range -50 to +320 mm Hg
Leads I, II, III, aVR, aVL, aVF, Vn Accuracy ± 1 mm Hg
CMRR ratio > 100 dB Input sensitivity 5 μV/V/mm Hg
Frequency range: Pressure waveform displayed
Diagnostic 0.05 to 100 Hz
Monitoring 0.5 to 40 Hz
Paddles 1 to 25 Hz
Sensitivity 2.5 - 20 mm/mV
HR range 15-300 bpm
QRS signaling acoustic and optical
Input protected against defibrillator
and high frequency disturbance

RESPIRATION MODULE
EMTEL, Zamkowa 1, 41-803 Zabrze, POLAND
Respiration rate 0 - 150 rpm
tel.: +48 32271 90 13 fax: +48 32271 57 27
Measurement method rheographic (impedance)
Apnea recognition time 5 - 60 s
[email protected] www.emtel.com.pl
Possibility of lead selection
Respiration waveform displayed
Project co-financed by the European Union from the European Regional Development Fund under the Regional
Operational Programme within the framework for the Silesian Voivodeship for the years 2007-2013

Emtel reserves the right to make changes to this sheet and the product at any time without notice.
Photos were taken in Boni Fratres Order Hospital in Katowice.