JCM 301 Flanged Coupling Adapters
The Quick, Simple, Economical way to join
flanged fittings,
valves and meters to plain end pipe.
Special flange design provides
Ductile Iron body and flange extra versatility which makes it
and corrosion resistant high an excellent means for installing
strength alloy bolts provide wafer type valves, fittings and
high strength and corrosion equipment.
resistance to installations.
Optional retainer set screws
anchor the adapter on steel,
Laying length provides extra cast iron and ductile iron pipe
margin of safety for field eliminating the need for tie rods,
cutting of pipe, yet is short thrust blocks and additional joint
enough for close quarter restraint. Retainer set screws
installations. are not exposed to the line
contents and do not require
drilling of pipe.
Full bolting to compression
flange provides proper gasket
compression. Many adapters
use half the number of the
standard flange.
Special flange gasket Special wide range gaskets,
provides extra sealing which are interchangeable with
capability on new and old JCM Ductile Iron Couplings,
flanged fittings and provide extra field versatility
equipment. The wide molded necessary on installations
gasket has a special lip which involving deflection, oversize
increases its sealing pressure pipe, out-of-round and uneven
with increases in line pipe ends.
pressure.
JCM 301 Flanged Coupling Adapter Dimensions
Nominal
A B C D
Size
3 8-1/8 4-1/4 3 5-1/2
4 9-1/8 5-1/4 3 5-1/2
6 11-1/8 7-5/16 3-1/2 5-1/2
8 13-1/2 9-9/16 3-1/2 5-1/2
10 16-1/4 11-9/16 4 7
12 19 13-5/8 4 7
The JCM 301 Flanged Coupling Adapter combines a flange with a ductile iron flexible coupling to provide a
compact adapter fitting to connect plain end pipe to flanged fittings, meters, valves and equipment. The JCM 301
can be used to make on-site flanged spools and, when used with the optional set screws, eliminates the need for
extra tie rods or harnessing assemblies on flanged equipment.
43
JCM 301 Flanged Coupling Adapters
301 Standard Flanged Coupling Adapter 301 Optional Restrained Flanged Adapter
Applications especially advantageous for using JCM FCA’s
301 Standard Flexible Flanged Coupling Adapter
The JCM 301 FCA provides a quick simple means of joining flanged
• Valve insertions
fittings to plain end pipe. The 301 will absorb vibration,
• Equipment connections and offset adjustment
accommodate pipe deflection and expansion, provide for easy
• Converting flanged fittings to mechanical joint or push on type
equipment removal and reinstallation, and eliminate the need for
• Dampening vibration
exact measurements.
• Providing for field fitting of flanged spool pieces
301 FLANGED COUPLING ADAPTERS
NOM. PIPE QTY APPR.
PIPE SIZE O.D. RANGE CATALOG OPTIONAL WT EACH
(IN.) (IN.) NUMBER SET SCREWS (LBS.)
3.50 301-0350 4 17
3
3.80 - 4.17 301-0396 4 17
4.00 301-0400 N/A 22
4 4.50 301-0450 4 22
4.80 - 5.10 301-0480 4 22
6.00 301-0600 N/A 37
6 6.63 301-0663 8 37
6.90 - 7.20 301-0690 8 37
8.00 301-0800 N/A 44
8 8.63 301-0863 8 44
9.05 - 9.40 301-0905 8 44
10.75 301-1075 12 67
10
11.10 - 11.40 301-1110 12 67
12.75 301-1275 12 94
12
13.20 - 13.50 301-1320 12 94
*Set Screws are not for use on Asbestos Cement, HDPE or PVC pipe.
Add (R) to end of Catalog Number to indicate optional set screws.
Note: Applications in which pipe may move out of the coupling, proper anchorage of the pipe must be provided.
MATERIAL SPECIFICATIONS - JCM 301 FLANGED COUPLING ADAPTER
SLEEVE & FLANGES: Sleeve - Ductile Iron Per ASTM A536 65-45-12.
Flange - Ductile Iron with ANSI Class 125 & 150 bolt pattern
GASKETS: Styrene-Butadiene Rubber (SBR) has good physical properties. Standard temperature range from -40o to 150oF (-40o to
65oC) constant, maximum intermittent 180o F (82o C). Per ASTM D-2000. Compounded for use with water, salt
solutions, mild acids and bases; has excellent abrasion resistance. For applications on high temperatures or chemical
pipelines, contact JCM Industries. The material is not recommended for use on oil, ozone or weather resistant
applications.
BOLTS: 5/8" Corrosion resistant, high strength low alloy oval neck track head bolts per ASTM A242/ANSI 21.11/AWWA C111 and
heavy hex nuts per A563 or equal. Optional Hardware: Stainless Steel 18-8 Type 304 or 316; Epoxy Coated Alloy
Hardware, Powercron 590-534 black cationic electrocoat.
FINISH: Corrosion resistant shop coat paint primer. Optional fusion applied epoxy coating per ANSI/AWWA C-213.
Other coatings available upon request.
JCM Industries flanged adapters meet or exceed the ANSI/AWWA C-219 Standard as applicable.
44
